Pizza-cake? The other week I made 19 slightly longer (up to 280 cm) table-benches like this for the municipality. Some difference though: I made a jig on a ply sheet so all legs where assembled equally, two bolts and glue for all laps on the legs, smaller pieces for the braces, and a roundover/sanding on all edges to avoid splinters. It was a fun but heavy job.
You should really get that sawmill of yours going. That way you can start making lots of wooden structures without breaking the bank. Have you made any progress on it this year?
Yea, that would be great. It pains me every time I have to by material with all that forest in my back yard. The problem is that it will take a lot of resources to make a road to get access. It would involve contractors since there is there is a point where it needs to be blasted. My guess is I would need 30-50k USD😱. If I just needed a saw, it would be a lot easier.
Pizza-cake?
The other week I made 19 slightly longer (up to 280 cm) table-benches like this for the municipality. Some difference though: I made a jig on a ply sheet so all legs where assembled equally, two bolts and glue for all laps on the legs, smaller pieces for the braces, and a roundover/sanding on all edges to avoid splinters. It was a fun but heavy job.
Thanks for the clear instructions! Looks like you have a great set up there, well done sir! 🎉
Just built mine direct from your video, worked perfect, thank you very much.
Built your table design today, appreciate the guide and its easy and works really well. Cheers :) 👍
Glad you like it! 😊
THANK YOU.
This Is The Size That I Am Planning To Build. A 5' Table.
Explained Well. Well Made Video.
From Southern Alberta Canada.
Best video have seen on building this bro! Thanks
Interesting
Marvellous. Thanks you
Fantastic video ! I will use your video to make my own bench 😊
Thanks and good luck👍
You should really get that sawmill of yours going. That way you can start making lots of wooden structures without breaking the bank. Have you made any progress on it this year?
Yea, that would be great. It pains me every time I have to by material with all that forest in my back yard. The problem is that it will take a lot of resources to make a road to get access. It would involve contractors since there is there is a point where it needs to be blasted. My guess is I would need 30-50k USD😱. If I just needed a saw, it would be a lot easier.
I made picnic table but when the other person stands up it falls back with another person😂.where did we go wrong? Please help me
Flott benk 👍
Takker 🤠
Vist du spørre den med kokt linolje når den er tør før du bruker den varer den mye lenger
Takk for tipset👍
The cut ends need a couple of coats of preservative.
Good idea 👍
Keith Brown did a test of this, and it didn't really make any difference
Hi what size lengths of timber would be best to avoid wasting
I calculated it to work best with (x7) 2x6x6's
(x6) 2x6x8's
Hadde du en testkanin eller to, eller fikk du så bra resultat på første forsøk?
Nei, dette er første gangen jeg lager en slik. Kan innrømme at jeg lagde den første rammen og justerte litt før jeg filmet 😀
Hi,what do you mean 2 by6 ? Is cm?
Thank you
2-in x 6-in. That is a standard dimension for lumber. 😊👍
tutto bello tranne la torta.