Mini Apprentice S 1.2m RTF HobbyZone RC Airplane Build, Controls, and Tips - TheRcSaylors
ฝัง
- เผยแพร่เมื่อ 30 ธ.ค. 2019
- This plane is discontinued. We recommend one of these instead: bit.ly/3sgIsl5
In this video, we take a look at the tried and true HobbyZone Mini Apprentice S 1.2m RTF (ready to fly) rc airplane. You can also pick this rc plane up as a BNF (bind and fly) meaning it comes with a Spektrum receiver (Rx) and you will need you own transmitter (Tx). We give build tips and tricks, plus share some knowledge about the hobby. We also teach you how to bind this to the transmitter and make sure the controls are correct. We hope this video not only teaches you how to build this plane, but helps you along the way to becoming a knowledgeable rc plane pilot! Leave any questions or comments in the description box.
Beginner Series Playlist: bit.ly/35e1sV0
Disclosure: This description box contains affiliate links.
This plane is discontinued. We recommend one of these instead: bit.ly/3sgIsl5
Lipo Alarm: bit.ly/2MdJqMl
The products in this video are rated for ages 14+.
Support TheRcSaylors
Patreon & Stickers | / thercsaylors
Ebay | goo.gl/xUh1KM
Merch | www.thercsaylorsyt.com/shirts
Mail | 1140 Carter Ave, P.O. Box 361, Ashland, Kentucky 41101
Social Media
Facebook | / thercsaylors
Instagram | / thercsaylors
Twitter | / thercsaylors
Vlog and Live Channel | / thesaylorsytchannel
SPECIAL THANKS TO OUR PATREON FAMILY!!
Ryan Alexander, Gary Zion, Derek Trombley, Chris Hamlett, Richard Higginson, Ian Coulson, Richard Bereczky, Jack Richardson, Bryan Tyson, john salt, Dan Conroy, David Chenzoff, Brandon Tibbetts, Banks McDade, Ron Erickson, Jeff Acevedo, Jeff Buys, Eddie Williamson, Terry Kellogg, Jesper Larsen, Michel J. Gaudet, Alan Savage, Matthias, Gary Burt, Michael Califf Sr, Joseph Schauber, Pete Schmitt, Haar Bear, Robert Hipp, walter stimax, Raymond Hausele, Priyan, michael baney, and Chuck R
#rcplane #rcairplane #rc - วิทยาศาสตร์และเทคโนโลยี
Happy new year. It's not a crash, it's an unintentional, unplanned, spotlanding.
It’s not the unintentional, unplanned, spot landing that worries me; it’s the rapid, unscheduled disassembly... 😉
Happy New Year!
@@chadpollman7970 It just reverts back to the kit stage again. ;)
I've been out of the hobby for just about 20 years now and now my son is at the age of properly getting into the hobby. This plane and set up is going to be of such tremendous help to both of us. This video was incredibly helpful. So much has changed in the hobby it is truly extraordinary.
Was in the hobby like 40 years ago. About to take my Apprentice out to the flying field for the first time. Wanted to see the startup. Thanks!
I literally just did my made today about 15 minutes ago and I can’t tell you how happy I was I’m yong not crashing was so amazing 🤩 😀😀😀😀😀😀😀😀😀🤩😀😊😂🛩
Great video. The Apprentices have taught a lot of people to fly, and I think a lot of clubs use them as trainers. I love that you are doing this series for first-time flyers.
I just bought an apprentice for my sons birthday gift. I appreciate your video, giving me the step by step on assembly. Your video on flying in the wind was also great!! Thanks for making the video and posting for a newbie like me.
I was just considering the mini apprentice. Thank you for reviewing this. I'm definitely buying one. First I'm gaining experience on my Champ but I want to have this plane already. Thank you Nate & Abby for all you do.
You guys are awesome for doing this for us beginner pilots!
Really appreciate your beginner series! I started out flying toy rc helicopters in my house and now I’d like to move onto rc airplanes. I’m learning a lot. Keep up the good work!
Thank you guys so much I finally took the leap from ground vehicles just ordered a sport cup S today impatiently waiting for its arrival
I just ordered mine!!!! Watching your video several times. Thank you
Awesome Sean!! Really appreciate the support!
Thanks bunches guys! thanks to your videos, I my first plane in the way. I bought a BNF, Volantex, Ranger 2K, and got a Flysky FS-i6X FS I6X, w/ an IA10b recei ver, for radios. I am a flight simmer for years, and my twin is a real steel pilot, so we are going to get into this together!
You 2 work so well together, if Nate doesn't mention something Abby usually picks up on it and chimes in or vice versa. Always so informative Thank You
Really enjoying the video's. Flew briefly about 38 years ago, and now just retired and am keen to start radio modelling again. Great new technology compared with when i did flying/crashing. :)
Nate and Abby I watched the video on the beginner Apprentice. You both did a great job we all appreciate it Thanks Michael
Thank you! 👍😁😎⚓
New pilot here, I went ahead with the full-size Apprentice and also using a coach from Horizon Hobby. Also another great video, thank you
Watched the two prior videos, great work guys. I've had cheap helicopters, no planes. I've ran numerous hobby grade trucks. Out of the three I like this one the best, because it comes with spectrum radio. Thanks for the videos!
Good timing for this video since my wife got me this model for Christmas. Just have to wait for the weather to break to fly. Might have to get some skis for the snow.
Happy to put some of my RC Saylor stickers on.
Happy New Year to the four of you. Looking forward to more in 2020.
Thank You for all the Videos. I wish you all a Happy New Year !
The only thing I don’t like about this hobby is how addictive it is
Thank you. Seeing these steps is helpful. Love watching you test fly but it helps to see the process.
TERRIFIC lesson!! Nice looking plane!! Happy New Year to everyone!! Thanks Saylors for the much needed instructional video!! 💟👍😘
Love your vids keep making more
Another great video!!! You guys are awesome!!! Keep up the great work 👍👍
Great little plane, I retired recently and this plane got me into flying the beginner mode makes it easy to fly and as you get better you can move to the intermediate then advanced modes. I also upgraded to the dx6 radio which I now have a conscendo powered glider on too 😀 I really enjoy your videos keep up the good work!
GREAT looking plane
Thanks for the beginner videos.
Just bought this, thank you
Nice plane Ingenious design !!!
Happy new years and a lot of love from AB and Yas in Denmark. All the best to you all in 2020💕
I discovered another very good demonstration channel. Very nice, thanks.
Happy New year RC Saylors!
Cool plane Nate🙂
This looks like the plane. I'm going to start with.
Have a safe and happy NYE, family!
Thank you so much for helping me build this plane. The website didn’t have anything and building with you this really helped me.
thanks mate you have made me get into flying always been a bit sheepish about flying but u make it sound a lot easy then i ever thought after being into anything with wheels for 20 years I'm going to branch out and give it a go thanks again jas
I have the mini apprentice an have flown it a few times. I saw a tip in the You Tube channel by “RC Instructor” to measure the center point on the front and back wing and similar center point on the fuselage. As you put the wing on at the field, you have reference points to make sure the wing is centered on the fuselage every time as you put on the rubber bands. When you have the trimming done, the plane “is supposed to be” consistent from flight to flight.
Have a good and safe New Year to your family
Nice and easy! Great job.
I absolutely love your channel!! Keep up the amazing content you guys!! ❤️❤️❤️🔥🔥🔥🔥🔥
I am a big fan of the Apprentice both large and small. They are a very stable plane and easy to learn on. I still insist on a simulator first before buying any RC plane.
If not, join an air field and let someone teach you. Nice Job you two. Hang in there with the virus deal going on right now. We will all survive this.
I'm getting an aero scout soon and it's realy nice to have someone to watch and see there struggles to know that I'm not alone lol
Thanks for the heart
Great looking plane, thanks
My first plane! Still love it. touch and gos are a breeze with this. So much ground clearance
Happy new year to you and your family 🙂
I love this airplane.
Got one hanging on my livingroom wall. Waiting till I get better with my Aeroscout. I really like the scout. Happy New Year to all. ✈⚓
I just did my first ever flight today. I have always wanted to do this. My first flight went well with the Sport Cub S.
Congrats
새해 복 많이 받으세요 ~~
Good job 👍👍
See ya nxt year !!!! Happy New Year to all !!!!
THANK YOU FOR SUPPORTING THE TROOPS.......Sgt M Skip Pickens USMC Reired
I hav officially purchased it
It’s on its way 😁😁😁😁😁😁😁😁😁😎😎😎😄
Thank you Nate Abby and Amila 🤔 and i wouldn't forget about Popeye 🐶, Have a Happy 🎉New Year 🍾 see you Next year 🖐
This is one I was considering on, but then I saw someone take a tape and show the measurements of the Sport Cub and I decided on that one. Made a comment on Gary's channel that I tried it in the two lots behind me, too small of an area(at least for a first timer) Going to have to go to our neighbors (next town) at the park and try it out there. When I did have it up in the air though, it was fun!maybe when I get the hang of this one and want to move up to a bigger plane, maybe, the Carbon Cub will still be available to purchase.
u should always end with crisscross, it will help keep the the straight ones on so they have no way to fall off.
Very good tip 👍⚓😎
Have been wanting to get into RC airplanes, being a disabled vet the cost is out of reach. VA disability isn't any way near enough to have these things, but really enjoy watching videos like this and other flying videos. Thanks for the enjoyment
Look for used on Marketplace. I saw a full sized Apprentice with the transmitter for $200. That's a bargain and a half. The transmitter alone is $75. I have purchased 4 Apprentice for between $100 and $160 Only one with Radio. You can find bargains if you look for them .
Sir, from the bottom of my heart I thank you and that is not even enough. Your offer is one I will remember for a long long time, yet Neito, I could not accept the offer. I feel proud to have had such an offer, but can you see also I would feel like I was begging, I need to watch what and how I say things. Again Neito, thank you very much, wish I knew where to come to just shake your hand.
Just keep being the folks you are, and keep the videos coming. Many thanks again.
✨🤗✨ HAPPY NEW YEAR!!! y'all - hee hee.
Seriously, may the coming year be your BEST in EVERYTHING you do.
Toodles!
Wow coordinated Ruder aileron function.
Nice job Thank You
Glad you enjoyed this video 👍 Thanks for tuning in! ⚓😎
Happy new yeasts guys.
Thanks NATE...
Good information. Enjoying the build videos. For planes a build tutorial then fly is more helpful. Drones, or vehicles don't need that unless you show a build which you are ,or vehicle mods. Like the lights Abby was going to put on one of her's. 😁😁. I really hope to see Abby fly this one.🤔🤔. Happy New Year's Eve, then a Happy New year. 😊😊😊⚓⚓👍👍💘💘👍👍⚓⚓.
I just used 2 bands on mine :D
I’m getting in the hobby with my brother
Horizon hobby also has the RTF Apprentice S 15e
SUPPORT the TROOPS
my first Big plane is the new Night Timber X
I've watched your beginners series along with many other of your vids. And have seen a lot of rc vehicles behind you. Do you keep these rc airplanes?
Good video.. I'm looking at buying my first plane. I like this one too. Was looking at carbon club s that yaw did? I do have actual flying experience but never an rc plane...
Will you be discussing in this beginner's series the new proposed FAA regulations for model aircraft? I think you should so that those of us new to RC flying can make a more informed decision about/before jumping into the flying segment of the RC hobby. Thanks.
why not wait until there are new regulations...not just proposals?
@@ab7rs Tracy, I'm not sure whether your question is directed to the Saylors or me... [Thumbs up for your reply either way!]
If it is for me my answer is that being informed about the proposals - even before they might become regulations - will have you be a more informed RC hobbyist. For example, if I were to get into the hobby today I would not purchase an RC plane weighing over 0.55 pounds based on what I've learned over the past several days concerning the proposed regulations. Also, learning about the proposed regulations now allows a hobbyist to voice their opinions about the proposed regulations before they become regulations; even actively supporting or opposing them. IMHO, really BIG changes are coming to the flying (plane and drone) segment of the RC hobby and folks are better off informed than not informed.
The Saylors are two mature adults that know how they want to run their channel. If they see my question they are of course free to answer or ignore.
@@BillKisel my reply was to whoever would listen, it was really just a cry of frustration. I'm a fairly new pilot of 5 years (62 years old). I have been trying to keep up with the rules and for the most part obey them. a couple of things frustrate me:
the rules and/or proposals change way too often, I went from registering for $5 to having my money refunded to not caring as I hear about different entities voice their opinions about what should be law. The latest NPRM scares the heck out of me and if implemented in it's entirety would destroy the hobby part of RC.
Also the rules have always been way too much of a broad brush,applying to everyone everywhere.
I fly some sailplanes, often up to 1,200 feet and have been told by those in the hobby and without that 400' was the limit....I don't believe it was, I guess we should all at least know the rules. I pay attention to where I do this.
I also fly some long-range FPV fixed wing 1-3 miles and without line of sight or a spotter that has always been a no no. I use common sense and have a return to launch function. Again, I pay attention to where I do this.
I like how some of the higher powered VTXs say an amateur radio license is required but then the FCC regulations prohibit a "ham" from controlling a craft in that manner.
I applaud your willingness to keep up the fight but I'm too tired, I just want to have a little fun. I hope it all settles out but I'm going to keep on flying with common sense and quit when I can't buy a new plane without it being tracked.
The latest episode of RC roundtable podcast has some excellent views on the subject....with an AMA rep.
@@ab7rs I hear you Tracy. I'm 75 years old and was/am just interested in doing some fun flying on/over my own property and maybe joining the local flying club for some fellowship. However, if it turns out that I have to register planes and pay fees and have a WiFi connection for the plane and transmitter I'm just not going to bother. I'll simply invest more time and money into the hobbies I already have established and am enjoying.
Whatever shakes out I hope it doesn't destroy or cripple the hobby. As a kid, back in the fifties, I and my brothers were into making and flying control-line model airplanes. Interest in the hobby then led me to go to Aviation HS in NYC and from there into the Marine Corps where I had the privilege of working on F4 Phantoms (USMC 1962-1964). Take care...
What plane do you recommend for a adult beginner, who has already learned the basics on a simulator? Thanks.
Hello Nate and Abby just getting into planes From Ohi.
Very awesome David! Have you found the plane that looks like the right fit for you?
can i buy this plane as a BNF and then buy a radio with more channels for future use on more complicated planes and still be able to use the "safe fly" and "panic recovery". If so which radio do you recommend? To me it seems a bit of a waste to buy the RTF with a 4 channel radio that will not be used on more advanced airplanes.
Thanks for taking your time to explain all this to beginners.
Should go through the Aircraft and check Everything , to be correct. Set it up and make sure it is as per the instructions. 90% need to be checked. Sorry if i have given any alternative comments. Keep up the Video's . C/G is the most important.
13:45 isn't it because you have a normal and a reversed servo? Thus it does not matter if you swap the wires when connecting the wing as they will do the opposite of each other. I have this plane for almost 2 years now. Was my first, learned to fly on my own and has only a few minor scratches. That's quality! For the stretchers, use baby powder to keep them in good condition when not flying and always take them off when you are storing the plane. They should only be on there when you go out flying. Always used 4 with loops etc, never got one failed mid flight ;).
The links do not work in the UK, can you write the full name of the equipment eg the universal transmitter and charger so I can do a UK search, thanks guys great channel and love the beginner stuff
Prop should be off when setting up a plane!
What does the binding wire do?
I watch all your videos and I just wanted to tell you guys about the new proposal from faa and this is serious we all need to get together on this it's gonna kill the hobby been flying for thirty year we got 60 days
Especially knowing the transponder runs 2k.
Anything about buddy radio? How does it work? Do you have to use the same brand does can a 35mhz radio work with 2.4ghz? Would be nice to know if I should teach someone.
what is the biggest mah battery that will fit in the battery compartment?
Just curious if you guys have flown the larger apprentice yet? I searched through videos, but didn't see it. I'm considering either that plane or the Aeroscout S that seems like a good trainer. I like some of the features of the larger apprentice, but have heard mixed reviews for the reliability of the "virtual" fence gps feature. Several years ago I got the little starter cub (the yellow one that's under 100), but like the idiot I am tried the first flight in a bit of wind and lost orientation. I want to try again, but I'm looking for easiest to fly/train. Thanks for all the informative videos, learned a lot from you already!!
Since this is ready to fly can u use the transmitter that comes with kit on different planes if I wanna expand my collection?? Or what would be a good transmitter to get if I wanted to get really into hobby??
since it's a beginners series why not advise removing the prop for setup?
It’s ironinc I got this plane for Christmas last year 2018!
HI bro I have TX16S now need to by training airplane and battery, where to buy?
Can you put a land assist sensor on this specific plane?
Should I get this or the cabin cub s2??
Sorry to bother you with a question like this but I have purchased this also. I am in need of a prop but the HobbyZone website says it's been discontinued. Can you make a recommend a replacement prop or some other supplier. Thanks. I enjoy your channel so much and is why I got interested in the plane as a starter for myself.
Would you recommend this one or the carbon cub +?
I tried to find a hobby grade charger upgrade for the mini Apprentice what would it be
I really want to replace my Apprentice but in this size, I can fly it behind the house. I am not sure. I want one, but then again, I want something different too.
Will an 11.1v 3200mah battery work in this?(if it even fits) the same battery the regular apprentice S uses.
My question is this plane, how much range does it have with the dxs radio that the RTF version brings?
I'm wondering if you can exsplaing how to program the receiver?
What exactly do you mean by "program" the rx my friend? Happy to help if I can! 👍⚓😎
My question is when I buy a RC plain and is PNP version, not BNF version the receiver I choose already come with Safe Select and AS3X technology with in. I'm new with RC airplanes my hobby was Drones but I think airplanes is more fun. With Drones I have to program the betafly program or clearly program airplanes is not like that. That is my question. And by the way I enjoy your RC videos very much keep up the good work.
Do you know of any props I can use with the mini.all the OEM props seem to be discontinued.
on my apprentice plane there is not a marked GPS plug location were should i plug it