‪@Sovol‬

First run of the 12 minute benchy included on the new ‪@Sovol‬ SV08. If you look closely you can see that the parts cooling fan is not working because of user (me) error. I hooked it up to the wrong pins after removing the shroud. More tests, results and thoughts will follow.

[@griffgear3d]

Here is the fix by @gerGoPrint3D th-cam.com/video/xt6uzXgRJdc/w-d-xo.htmlsi=PPL7XuI5vrZgxYJx&t=836 for the rattle in the Z-Axis

[@_TheFreeMan_]

Sounds like you might have the QA issue of excess loctite dried onto the pulley connected to the Z motor(s). The fix is detailed in gerGO's video.

[@griffgear3d]

For sure. I was going to link his video in there also. Can definitely hear it.

[@EatingCtrlV]

Looked like the main cooling fan never kicked in on that print, is it maybe plugged into the wrong fan header? theres 2 open on the board, only the one works I think.

[@griffgear3d]

That was exactly what I did. I remedied the issue right after print completed. I was just amazed it went so well with no parts cooling.

[@EatingCtrlV]

@@griffgear3d I was actually thinking the same thing, when you pulled the benchy off and showed it for a second I paused and really tried to get a look at it, and none of the issues I would have expected to see were there.
I'm sure you had a much better view of the issues in person, but given the main cooling fan was turned off, and it was a speed print, it came out kinda ridiculously nice lol.