Thank you! Yeah, I'm shooting with a DSLR now and I added the anamorphic bars for dramatic effect in this one. It can be fun to work around the nice gear sometimes. :)
The cartridge alone was rated in stereophile to equal that of a $2000 cartridge. It just sounds that good. Also if you replaced the center record clamp, the cheap plastic one they give you with a VPI stainless steel record clamp that just fits over the spindle that too will improve its performance.
The plastic one they give you works adequately, but my favorite is the Clearaudio Twister Clamp. It grips the spindle as you twist the lock and tightens down without adding undue weight that can effect the bearing. Some clamps are too heavy for some tables.
This turntable is basically the same TT as my old Clearaudio Emotion mk1 from around 15 years ago, but upgraded a wee bit. Not a bad TT at all and like this guy said a lot more deck than the cost suggests :-)
I have a Marantz 6100 Turntable. It makes a perfect set with the Marantz 5220 Tape Deck and a Marantz 2225 Receiver. I think the Marantz 2225 was the best and most beautiful (without that exaggeration of buttons) model already developed until today. Its sound is soft and pleasant. I use this set with a pair of Akai speakers from 1972. All in new condition.
I have nearly the same Setup. But i have the Marantz 2238 Not the b Version. But i have very modern Nubert nuvero Speaker. I like my Marantz 6100 turntable. Thumbs up from Germany.
You mentioned that it does not come assembled.. Is the cartridge already properly attached to the headshell ? I am confident I can handle anti-skate and the counter weight but worried about properly aligning the cartridge to the headshell to the tonearm. Also, it appears that this turntable is from 2006 or so ? That's quite a good, long run !
Clint, I just bought this TT after watching your video and reading reviews. Added a Phenomena II Plus preamp and a cover. Am torn between this and the Clearaudio Concept. Which do you prefer?
They are very close. I like the frosted acrylic look of this, if you play different speed records, the Concept is easier to change speeds since it's just a dial. Both are nice. In Clearaudio I like the Performance DC, then you're taking a nice step up.
You don't need to. It doesn't come with one though, if that's what you're asking. If you don't use a dust cover, just make sure to take your LP's off after you're done playing them so they don't get dusty.
Hi ,Clint. I'm from Argentina. Your excellent video made me buy one of this Marant TT recently , but i have a serious problem because i´ve mistakenly bought the american version designed for 60 Hz and my country (Argentina) is 50 Hz , so the rotation speed is too low , about 28 rpm instead of 33 1/3 rpm. Would you please do me a little favour that would be very important to me ?. Can you measure the external diameter of the pulley you have (its larger diameter) , and tell me that figure ? Only that. Marantz doesn't respond to my inquires, and i have the doubt of the model of pulley that i need. With the diameter of the pulley you are using for 60 Hz, i can assure the one i need for 50 Hz. Sorry and thank you. I give you my best regards from Argentina. Juan Carlos Madera
Yep. As I say now, you're lucky if you've got anything right now. Everything went up in price drastically this year, plus we can't get stuff even if we wanted to. We have to order and wait months, and they might raise the prices in the meantime.
![MV วิถีชีวิตใต้ - ผา อัยย๊ะ [Official MV HD]](http://i.ytimg.com/vi/nODlkOUu9B0/mqdefault.jpg)
Aesthetically this is a stunning piece of minimalistic design- it gets 10/10. I must arrange a listen here in the UK.
Easy to listen to this reviewer, and his explanations are clear.
Thank you!
Man the visual quality of your videos has improved tenfold! Great review, must be a blast to work around gear like this full time.
Thank you! Yeah, I'm shooting with a DSLR now and I added the anamorphic bars for dramatic effect in this one. It can be fun to work around the nice gear sometimes. :)
The cartridge alone was rated in stereophile to equal that of a $2000 cartridge. It just sounds that good. Also if you replaced the center record clamp, the cheap plastic one they give you with a VPI stainless steel record clamp that just fits over the spindle that too will improve its performance.
The plastic one they give you works adequately, but my favorite is the Clearaudio Twister Clamp. It grips the spindle as you twist the lock and tightens down without adding undue weight that can effect the bearing. Some clamps are too heavy for some tables.
This turntable is basically the same TT as my old Clearaudio Emotion mk1 from around 15 years ago, but upgraded a wee bit. Not a bad TT at all and like this guy said a lot more deck than the cost suggests :-)
Curious.. what are some of the pros/cons ? "Not a bad TT" sure sounds like you have some reservations with it? Thanks.
I have a Marantz 6100 Turntable. It makes a perfect set with the Marantz 5220 Tape Deck and a Marantz 2225 Receiver. I think the Marantz 2225 was the best and most beautiful (without that exaggeration of buttons) model already developed until today. Its sound is soft and pleasant. I use this set with a pair of Akai speakers from 1972. All in new condition.
I have nearly the same Setup. But i have the Marantz 2238 Not the b Version. But i have very modern Nubert nuvero Speaker. I like my Marantz 6100 turntable. Thumbs up from Germany.
I want it! It's very cool looking too...
I've got two in stock!
White turntable, white speakers. Nice match!
Dude! Glad to see you rockn the beard again.
You mentioned that it does not come assembled.. Is the cartridge already properly attached to the headshell ? I am confident I can handle anti-skate and the counter weight but worried about properly aligning the cartridge to the headshell to the tonearm. Also, it appears that this turntable is from 2006 or so ? That's quite a good, long run !
What do you think of ADCOM gear ??? Thanks for your time ...
Clint, I just bought this TT after watching your video and reading reviews. Added a Phenomena II Plus preamp and a cover. Am torn between this and the Clearaudio Concept. Which do you prefer?
They are very close. I like the frosted acrylic look of this, if you play different speed records, the Concept is easier to change speeds since it's just a dial. Both are nice. In Clearaudio I like the Performance DC, then you're taking a nice step up.
This turntable sounds incredible and gives an enjoyable music experience.
you might want to try listening to some of the more 'classic' TTs like Linns, Michell or WTT and reassess.
How do you think it would compare against the latest Rega Planar 6?
curious how this might compare with Pro-Ject RPM5
@@oscillatingdailyaudio Better for sure
@@waxwiresnwaves The Rega is a bit more bright sounding but you can always play around with cartridges.
Clint do you still sell this model and what would it cost in Canadian dollars? How about spare belt ? Thanks.
It's $1799 USD. But yes, I have two of them in stock. I don't think we can ship to Canada though.
My dream turntable. Its just too expensive in Australia nearly $3000
How does it sound with the blue compared to the virtuoso? I’m concerned about the bass section, could you please comment on that? Thanks
Holy crap: a jean jacket!
I thought those were extinct. Props! I'm considering this turntable btw.
I call it my "Canadian Tuxedo" haha.
I highly recommend replacing those stretchy belt with the taunter and thicker belt from LP Gear (ViVid belt).
can you post a link, i cant find a belt for the Marantz TT15
Jack Zim, www.amazon.com/Clearaudio-Emotion-Turntable-silicone-belt-genuine/dp/B00NYA9FGS
thanks
Do you care for the VPI turntables? They seem to be top of the line.
Sure, they make some very nice stuff too.
Do I need to buy a cover for it? Ordering one tonight.. thanks for the review!
You don't need to. It doesn't come with one though, if that's what you're asking. If you don't use a dust cover, just make sure to take your LP's off after you're done playing them so they don't get dusty.
Nice ! What options are available for covers that are not $200 and up ? Also, does this mean that the 2MBlue is compatible with this TT ?
The 2m blue works great with this TT. But I don't know of any cover options under $200 unfortunately. Ebay will have some covers though.
I can't think of the manufacturers but Upscale Audio has some custom acrylic covers for it.
What are those speakers? Nice finish!
Is that record super warped?
A little bit. I've got some that are much worse that still play fine though.
I've heard one and it is a very very nice table. 👍👍
This or the Planar 6 + Ania?
Would you recommend the Parasound P5 and outlaw power amp or an intergraded like the rotel a14?
I use a Parasound P7/A21 combo with this TT. its a very good setup. So the P5 should be close.. Or go with the Parasound Integrated amp.
Hi Clint! Have you heard any Uturn audio turntables? I think most people say they are good but how good :)
No unfortunately. Mike Fremer liked it, so it can't be bad. Probably a decent entry level piece.
Photo314159 ok thanks!
Nice. Thanks for the video.
This is the TT I want but I'm afraid if I purchased it my wife would take it in the divorce.
Haha, sorry to hear.
Do you recommend the Marantz tt15s1 paired up with a Marantz pm8006 ?
Absolutely, that would be a great combo!
Thank you received my rpm8006 it’s masons
Amazing
The tonearm looks like quality engineering, but the drive system looks cheap.
fine speed control?
No adjustment necessary. There's an app that'll measure the platter speed. My TT-S1 was almost perfect at 33.303 rpm.
Hi ,Clint. I'm from Argentina. Your excellent video made me buy one of this Marant TT recently , but i have a serious problem because i´ve mistakenly bought the american version designed for 60 Hz and my country (Argentina) is 50 Hz , so the rotation speed is too low , about 28 rpm instead of 33 1/3 rpm.
Would you please do me a little favour that would be very important to me ?. Can you measure the external diameter of the pulley you have (its larger diameter) , and tell me that figure ? Only that. Marantz doesn't respond to my inquires, and i have the doubt of the model of pulley that i need. With the diameter of the pulley you are using for 60 Hz, i can assure the one i need for 50 Hz.
Sorry and thank you. I give you my best regards from Argentina.
Juan Carlos Madera
not crazy about an acrylic motor pulley...
why did you replace the cart?
2:20
Is the VTA adjustable?
Yes, it just depends on how high you set the tonearm in the plinth.
$300 price jump. too bad.
Yep. As I say now, you're lucky if you've got anything right now. Everything went up in price drastically this year, plus we can't get stuff even if we wanted to. We have to order and wait months, and they might raise the prices in the meantime.
the light thing is a bit tacky
Beauty is in the eye of the the beer-holder. My TT-15S1 looks absolutely glorious when the colored LEDs are turned on.
Wow, what impressive way to waste money!
Haha, ok?
Wow, what a wasteful comment!