Great review! I did similar positive airflow with vision compact. Exhaust is only for three fans on the top. Whereas (bottom-tube oriented) push pull side-mounted 360 aio is intake including bottom three fans and two rear fans. Max temp on my 9800X3D is 67C with simple PBO of -30. One thing I noticed that the Cinebench score could also be improved by turning off the 'Sensor' meter display on the TL LCD.
Hello prawn, is it possible to make a short or something comparing the size of the original vs the compact? I can’t seem to find anybody actually showing that off and I’m very curious
Hey, I love your videos! Is there a specific reason why, with the Corsair 150i, you placed the radiator tubes at the bottom instead of at the top, like in the other AIOs? Hello from Costa Rica 🇨🇷
It's Corsair's suggestion to stop air bubbles eventually getting into the radiator at the top and then possibly in the pump. See here th-cam.com/video/qQcyYHGtArs/w-d-xo.html
Just found your channel really great work. Thought I'd see if anyone has experienced my issues. Just built a new pc with all lian li infinity fans with there Aio GA II LCD everything works but when I download L-Connect 3 the pc goes into blue screen some times it works for a couple boots but 100% it always ends up at a blue screen having to reset windows. I have tested everthing and works 100% without the software installed.
I bought this case(I have the 011 vision)(011 vision size is a bit too big) although I went BACK to my regular size 011 Vision because the pass through of the AIO was HIDIOUS. If I were to go back to the small form factor of the 011 vision compact, I would run the AIO cable like I normally would and I would not disturb the grommet passthrough because aesthetically it looked ugly. I like that it has white grommets as opposed to the grey ones. There is a lot to love about this case. But I returned the compact version and if I were to do it again, I just would not feed the AIO through the grommet passthrough.
@@STKReacts but the aio radiator can't be top mounted right? Won't that create air bubble issues in the long run? Everyone says top mount for aio is best
Do you think it would be possible to do a dual aio build in this case? I’m curious because there’s been a lot of talk around the next gen GPUs going smaller and potentially being cooled by aios.
Are the fans on the radiator pulling air from outside your case or pushing air from inside out? I want to do a push pull but not sure what direction all my fans need to be.
I would like to build the last pc setup shown in this vid for my first build. would it still work if i changed the motherboard to a strix b650 e-f and the cpu to a ryzen 7800x3D. Any information would be great as i find your buld videos very helpful.
Stuck trying to decide whether to go full Corsair or Lian Li cooler/fans/case. Personally leaning towards Lian Li but it seems just as pricy as the Corsair Counterparts T_T.
I have the gigabyte Aero 4080 super for my other pc, I can't connect the lian wireless strimer due to the 90° connector and the 600watt connector being further back on the gpu it self. Any recommendations would greatly be appreciated.
Specs of the builds (please note these include affiliate links which might earn me a commission at no extra cost to you):
Infinity Fans:
Case - Lian Li O11 Vision Compact - th-cam.com/video/SCxZJtZj8k4/w-d-xo.html
Motherboard - ASUS TUF Gaming Z790-BTF WiFi amzn.to/3WtrEsS
CPU - Intel Core i9-14900K (amzn.to/3QH6uUv)
RAM - Corsair Dominator Titanium First Edition DDR5 RAM go.corsair.com/baya19
NVMe SSD - WD_BLACK SN850X NVMe amzn.to/3Y5DJFB
SSDs - Crucial MX500 2TB and Crucial BX500 2TB th-cam.com/video/IOJNybKZ4wk/w-d-xo.html
PSU - Lian Li's Edge PSU th-cam.com/video/i9q6MkZ6IIQ/w-d-xo.html
AIO - NZXT Kraken Elite 360 RGB amzn.to/3AO0GDM
Fans - 2 x Lian Li SL-INF 120 standard blade and 6 x reverse blade fans
GPU - ASUS TUF Gaming GeForce RTX™ 4070 Ti SUPER BTF White OC Edition 16GB GDDR6X amzn.to/483ANfE
Corsair iCue Link:
Case - Lian Li O11 Vision Compact
Motherboard - Gigabyte Z790 AORUS ELITE AX ICE amzn.to/47oalxf
CPU - Intel Core i9-13900K (amzn.to/3QH6uUv)
RAM - Crucial DDR5 6000MHz Pro series RAM amzn.to/3UnPS6t
NVMe SSD - WD_BLACK SN850X NVMe amzn.to/3Y5DJFB
SSDs - Crucial MX500 2TB and Crucial BX500 2TB th-cam.com/video/IOJNybKZ4wk/w-d-xo.html
AIO - Corsair H150i RGB iCue Link amzn.to/4fcbviP
AIO cap - VRM Fan module go.corsair.com/m5L6r1
PSU - Corsair RMShift 1000X white (go.corsair.com/1rv9Ra)
Corsair PSU Cable kit - go.corsair.com/1rbAq6
Fans - Corsair iCUE Link RX120 RGB amzn.to/3Se0G5R
GPU - Gigabyte RTX 4070 Ti 12g OC amzn.to/3BDkbPH
Lian Li Hydroshift and wireless fans:
Case - Lian Li O11 Vision Compact
Motherboard - Gigabyte Z790 AORUS ELITE AX ICE amzn.to/47oalxf
CPU - Intel Core i9-13900K (amzn.to/3QH6uUv)
RAM - Crucial DDR5 6000MHz Pro series RAM amzn.to/3UnPS6t
NVMe SSD - WD_BLACK SN850X NVMe amzn.to/3Y5DJFB
SSDs - Crucial MX500 2TB and Crucial BX500 2TB th-cam.com/video/IOJNybKZ4wk/w-d-xo.html
PSU - Corsair RMShift 1000X white (go.corsair.com/1rv9Ra)
Corsair PSU Cable kit - go.corsair.com/1rbAq6
GPU - ASUS ROG Strix GeForce RTX™ 4090 White OC amzn.to/4h33hu1
AIO - Lian Li Hydroshift LCD 360R AIO th-cam.com/video/EhAJlQQMPfE/w-d-xo.html
Fans - Lian Li SL Wireless fans th-cam.com/video/MOjKofqCU34/w-d-xo.html
Strimers - Lian Li Wireless Stimers th-cam.com/video/nLxwK7jbtFI/w-d-xo.html
Z890 version:
Case - Lian Li O11 Vision Compact - amzn.to/4fcdoeo
Motherboard - ASUS ROG Maximus Z890 Hero amzn.to/3Ufn5k3
CPU - Intel Core Ultra 9 285 K amzn.to/4fbP1gX
RAM - Corsair Dominator Titanium First Edition DDR5 RAM go.corsair.com/baya19
NVMe SSD - WD_BLACK SN850X NVMe amzn.to/3Y5DJFB
SSDs - Crucial MX500 2TB and Crucial BX500 2TB th-cam.com/video/IOJNybKZ4wk/w-d-xo.html
PSU - Lian Li's Edge PSU th-cam.com/video/i9q6MkZ6IIQ/w-d-xo.html
AIO - NZXT Kraken Elite 360 RGB amzn.to/3AO0GDM
Fans - 2 x Lian Li SL-INF 120 standard blade and 6 x reverse blade fans
GPU - Gigabyte RTX 3090 Vision OC amzn.to/40f8w3S
Buy this spec at Overclockers - tidd.ly/3NAVxlC
Great vid Prawn. Appreciate the work.
Thank you! :)
Great review! I did similar positive airflow with vision compact. Exhaust is only for three fans on the top. Whereas (bottom-tube oriented) push pull side-mounted 360 aio is intake including bottom three fans and two rear fans. Max temp on my 9800X3D is 67C with simple PBO of -30. One thing I noticed that the Cinebench score could also be improved by turning off the 'Sensor' meter display on the TL LCD.
ALSO. The new NZXT Kraken ELITE would NOT fit through the passthrough lol
Thank you for this video. You've been a busy brilliant prawn haven't you!😄
Very busy!
It truly lives up to it's compact name :D
Top-notch content. Hats off to you, Sir.
A like to the video is the least you deserve.🤝👏
Thanks a ton
Hello prawn, is it possible to make a short or something comparing the size of the original vs the compact? I can’t seem to find anybody actually showing that off and I’m very curious
Hey, I love your videos! Is there a specific reason why, with the Corsair 150i, you placed the radiator tubes at the bottom instead of at the top, like in the other AIOs?
Hello from Costa Rica 🇨🇷
It's Corsair's suggestion to stop air bubbles eventually getting into the radiator at the top and then possibly in the pump. See here th-cam.com/video/qQcyYHGtArs/w-d-xo.html
Love your channel!
Thank you so much!
Just found your channel really great work. Thought I'd see if anyone has experienced my issues. Just built a new pc with all lian li infinity fans with there Aio GA II LCD everything works but when I download L-Connect 3 the pc goes into blue screen some times it works for a couple boots but 100% it always ends up at a blue screen having to reset windows. I have tested everthing and works 100% without the software installed.
I bought this case(I have the 011 vision)(011 vision size is a bit too big) although I went BACK to my regular size 011 Vision because the pass through of the AIO was HIDIOUS. If I were to go back to the small form factor of the 011 vision compact, I would run the AIO cable like I normally would and I would not disturb the grommet passthrough because aesthetically it looked ugly. I like that it has white grommets as opposed to the grey ones. There is a lot to love about this case. But I returned the compact version and if I were to do it again, I just would not feed the AIO through the grommet passthrough.
So you're saying that regular vision or o11d Evo is better?
@ for aesthetics the Vision is amazing.
@@STKReacts but the aio radiator can't be top mounted right? Won't that create air bubble issues in the long run? Everyone says top mount for aio is best
@ everyone has their opinions of how it should be mounted. I have zero issues. jayztwocents has a good video about mounting the AIO
Do you think it would be possible to do a dual aio build in this case? I’m curious because there’s been a lot of talk around the next gen GPUs going smaller and potentially being cooled by aios.
Quite possibly but I've not tried obviously
Are the fans on the radiator pulling air from outside your case or pushing air from inside out? I want to do a push pull but not sure what direction all my fans need to be.
Depends which build you're talking about
Can you tell me where you got the vertical GPU mount and also how did it affect the temps?
It's Lian Li's official mount. You can see the temps at the end of this video
I would like to build the last pc setup shown in this vid for my first build.
would it still work if i changed the motherboard to a strix b650 e-f and the cpu to a ryzen 7800x3D.
Any information would be great as i find your buld videos very helpful.
Stuck trying to decide whether to go full Corsair or Lian Li cooler/fans/case. Personally leaning towards Lian Li but it seems just as pricy as the Corsair Counterparts T_T.
Lovely built ❤❤❤.
I have the 011 dynamic evo but I want the vision and is been hard trying to sell it.
I wish the mesh mode didn’t have a support bracket😢
I have the gigabyte Aero 4080 super for my other pc, I can't connect the lian wireless strimer due to the 90° connector and the 600watt connector being further back on the gpu it self. Any recommendations would greatly be appreciated.
Thank you.
Should have done white wire covers bro
No pleasing some people