2007-2017 Ford 6F50 6 Speed Transmission Drivers Side Axle Seal Replacement **PLUS SOME GREAT NEWS**
ฝัง
- เผยแพร่เมื่อ 13 ม.ค. 2017
- Come along as we take care of a leaking axle seal on a 2011 Ford Explorer. This general procedure applies to any vehicle with the 6F50 6F55 transmission including the Ford Explorer Flex, Edge, Taurus, MKT, MKS, and MKX.
These are the Parts and Tools needed-
Revised Seal (All Years)-
amzn.to/2iwX0Mc
Rust Penetrant-
amzn.to/2jjfuAV
Seal Puller-
amzn.to/2iTZstX
Medium Strength Loctite-
amzn.to/2iUaWNT
Caliper Hanger-
amzn.to/2jkwPcb
Mercon V (model year dependent)-
amzn.to/2jjabBB
Mercon LV (model year dependent)-
amzn.to/2ix2jLk
My Company BSG Automotive offers Auto Repair services in the greater Chicagoland area.
Website:
www.bsgautomotive.com
Facebook:
/ bsgautomotive
Catch up with us on-
Facebook: / fordtechmakuloco
Twitter: / fordtechmak
Instagram: / fordtechmakuloco
My company TH-cam Channel- BSG Automotive providing repair advice on makes and models other than Ford: / bsgautomotive1
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user and BSG Automotive (hereinafter “FordTechMakuloco”) makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. FordTechMakuloco shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by FordTechMakuloco and therefore, FordTechMakuloco does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge FordTechMakuloco or anyone affiliated with FordTechMakuloco, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law. - ยานยนต์และพาหนะ
Brian, Not only have your videos kept my two Fords running, you also kept me entertained through a six month deployment. I think you help more people and in more ways than you realize.
Thanks I know how boring it can be during downtime when deployed!
@@FordTechMakuloco what is the tool you used to drive the seal in please😍😍😍😍😍😍😍
Thank you for your service and protecting us
Very thorough, best video on axle seal replacement. Usually I have to watch multiple videos to answer questions, after watching tutorials that lack instructions. You have left me with no questions, or the need to do further research on the subject. Thank you for taking pride in your work, and willing to share your knowledge. Awesome!!
Best video of of this job I have ever seen! And I have watched many. Your video gave me the confidence to fix my daughter's 2012 fusion. Many Thanks!
Congratulations on the new home and shop. You deserve it bro. Your tour across America helping Ford owners that were in need says it all. Keep up the great work.
Thanks!
that was one of the best tech videos ive ever seen ! you addressed all the difficult areas and i always wondered how to punch the axle back into the transmission. plunging it is excellent. was never sure if that would harm the joint or not but now i know. outstanding video and camera work too
Just did this last night, awesome video man. Thanks!!! I used a short piece of 2x4 to pound my seal in and it worked great, and purchased the seal puller on amazon which also worked great. I drained the Trans fluid first through the drain plug, which usually ends up being around 5.5 quarts and nothing came out of the seal doing it that way. On a 2014 Limited the strut bolts were splined on the left side but just on the left side of the strut itself not in the spindle. With the seal and puller it was around $30, not including trans fluid. Took a couple hours, well worth doing.
Glad your doing fine Brian. Your and other repair videos on YT help myself tremendously. Keep them coming. coldbear.
My wife's SUV was leaking transmission fluid, 1/2 quart per day. I saved myself a ton of money by watching this video and I did the job myself. It only took two hours working at a slow pace while being careful. Thanks for the video! You da man!
Congratulations on your upcoming move. Looking forward to seeing more repair videos on your new shop. Keep up the great work. You rock !
Thanks it is definitely an exciting time!
Brian congratulations on your new home. You deserve it. And yes a LIFT. SWEET
Thanks. Clear straight forward and methodical. Brian , you are a pro. I have learned so much from you.
Great video Brian. Can't wait to see the new shop being built.
Me too!
I'ma tell ya... You helped me get my truck on the road again when I was hit by this crazy economy... My F250 2006 4x4, 5.4 engine is running pretty good... From the solenoids, differential oil, to the stuck spark plugs (7 of them), serpentine belt, and cleaning out a/c unit with just blowing it while on the car from the engine wall, to knowing that I will need to change my phazers real soon. You are a champ! The best that I have seen explain it to the exact. I changed my rear wheels seals, too. Some day I can thank you better when I get back on my feet. A gift or something...
I’m seriously impressed with your explanation of this job. Ford wants 2300 for my 2015 explorer. No reason I can’t do this with your video!
Great video! You always cover everything in detail. Thanks.
Great job Brian. Like the drones in the back ground!!
Excellent in every way. Thanks. I hope you and your family are safe and healthy six years later.
great job as always. it is so great to see what I'm getting into before starting it myself.
It amazes me that more people wouldn't wont to see this
Thank you for all your help. 2011f150ecoboost engine rattle @startup ,has been repaired,under warranty. your video saved my a**.
God to hear!
Congratulations on purchasing a new home, and the ability of building your own shop to your own liking! I hope to be doing similar one day! Of course, another great instructional video 😄
Yeah I really feel lucky to be able to do it so quickly like this.
oh man a dedicated shop with a lift, how awesome is that! congrats
congrats on the move to a new shop
Great video...I'm replacing 2 axles in a Taurus now..Nice R/C collection..like the summits
I don't currently own a Ford but your video is very informative. I think I could do that myself now.
Thanks!!
Love how your videos are so thorough and detailed. Would the passenger side on an AWD Taurus leaking from the seal with the ptu be much more complicated, or is it about the same procedure?
Great video. Will help me immensely on an up coming axle replacement job on the wife’s 16’ MKX. Thank you God bless.
Great video Brian.
I don't have an AWD Explorer, but still enjoy watching the very professional way you explain and perform these repairs. Hope someday you will do the repair on the drivers side third row seat actuator of 2006 Explorers. Seems to be a common problem. Look forward to seeing the new shop. Thanks......bill
I wish they all came out that easy! Thanks!
The only seals I have a problem with is the rear diff pinion and axle seals with the adhesive on them.
Wow really looking forward to see the new shop! The repair videos you put out on the floor of your garage are about as good as they can get. With a lift in a shop they will be twice as good im sure. Really looking foreword to it
Yup camera angles, lighting, space, shop equipment all is going to be much much better!
Great video. This will help alot with replacing my axle seal on my 4x4 2008 Lincoln Navigator.
Thank you for your help and advice, Good video
Greetings from Amsterdam.
thank you for your help and advice
Well done. I love your carefullness. You probably never add time to the job because you are so carefull.
Great job Brian!! Thank you!!
right on Brian! that is awesome news!
Definitely!
Great news on the dedicated shop. Oh yeah, the house too! LOL
Excellent video. Thank you.
Nice video Brian & congratulations on the new house!
Thanks it's gonna be great I still cannot believe this is all happening!
You put out great detailed videos with tons of info for your viewers so it's definitely well deserved. Enjoy the fruits of your labor and it's just going to get better!
Dude you’re awesome!
Awesome video Brian. I take it that you moved outside of Chicago and bought a plot of land for your shop and house. I just find it awesome how your businesses are going
We are only moving about 2 miles away we are already outside the city now but much more space.
Congratulations. Can not wait. You have saved me alot of money following you. So i am going to subscribe to your page. Thank's .Jim
Congrats!!
Good video thanks for sharing
Excellent video
Good video. I would recommend filling the transmission with fluid once you seat the axle into the transmission housing before reassembling it all to make sure there are no leaks, because you don't want to find out that the seal is still leaking after everything has been put back!
CONGRATS!! You all deserve this and so much more. We're all so excited and happy as heck for ya. A lift .... HOLY MOLY Batman you're getting a lift in your home garage. That fricken rocks for sure. I want one too! Who Wouldn't love a lift in their garage? You know Ole Scotty is gonna show up here. Bet He's gonna be a bit jealous.
congratulations best wishes.
Thanks for another great video.
Congratz on the new Hut FordTech! Much deserved!
Thanks!
Note to all: 2014 Ford Flex---those 2 strut bolts are pressed on and splined into knuckle. After nuts are removed, bolts are tough to get out without air hammer. I had to apply some heat to the bolt head and beat on opposite end with a 10 pound hammer (with nut on to prevent damage to threads). It took a while but finally broke free.
it is crazy how ford did thst drastic change on the explorers,love the 3rd and 4th gen better
Hello sir, First I would like to thanks to the beauty of your explanation, 'I am follower your channel from Kuwait
I own a 2010 Ford f150 specifications Canada, I have a problem in the mapping system can not download maps of the Middle East .. Do you help me you can repeat
love the Ford videos, they have helped me in the past. I have a question, I have an 05 extended cab F-150 lariat the rear sliding window doesn't work. I've switched the rear window switch with a known good rear window switch and still nothing. any help would be appreciated. thanks again for the great videos
Good luck at the new homestead, hope you get that new shop with a lift save your body!
Me too it will be so nice.
nice job man. GET THAT NEW SHOP DONE ! Joe
The faster the better I need to master plan it first.
Great video as always. I see the bearing behind the seal are you able to pull that bearing out as well if you want to replace it?
2008 ford f-150 5.4 3v, had to grind the inner lip to interface the opening to remove the solenoid and screw, a 3/8's drill bit acts like a dremel tool. but it was a good start.
I hear ya there. Heck you can even performance vehicles as well as your daily drivers. Just ideas for future videos. I appreciate your videos
I may be doing as supercharger install on a Dodge Challenger this spring over on my BSG Automotive channel.
That's awesome! I'm hoping you can do performance stuff on ford's as well. Anything from mild to wild performance as well as your regular repairs
great video on how to simplify something that looks kind of Rough.
Great video. Very informative. Congrats on the new home. Can't wait to see it.
Isn't blue lock-tite on the axle nut a little overkill? It will only add a require a little bit of extra torque to remove later, not a significant amount. 250 ft/lbs of torque should hold it on there pretty securely don't you think?
+Pet Rock's Garage it's never overkill when it comes to driveline and suspension fasteners. The amount of vibrations they endure is enough for me to put two dabs of loctite on yes.
As always a nice video Brian. I noticed on my daughters 2012 Explorer the two large bolts holding the strut to the knuckle are splined for about an inch and a half or so from the head end and I had to use a brass hammer to get them out after removing the nuts. When reassembling, the bolts are a tight fit, I found it easier to use a wrench to screw them into the strut/knuckle until the splines contacted. Then I used the nuts to pull them all the way in. There was no play at all, so I don't believe there would be an alignment issue.
Did a little research, found the bolts were not splined from 11/1/2010 - 8/2/2011. The splined bolts were used after that. You dont need a backup wrench on the bolt head, the splines keep the bolt from rotating while removing the nut.. Also Ford says to not reuse these bolts.
You used a sharpie to mark the original position of the knuckle to strut . Would it help accuracy when reassembling , to also mark that spot ( on the knuckle ) with a scribe ?
Great video . !
God bless
Wyr
Hi! Excellent video as always and I don't even own a
Ford vehicle. I'm wondering you don't recommend rubbing any oil or grease on the outer surface of the seal that meets the metal. Do you?
Great vid. Brian
Do u remember how many quarts of lub. U did add to transmission. ??
And what kind of lub. ??
Regarding Abs wire, it doesn't exist in my 2012 explorer !! Strange indeed
On some of the Ford Escapes you also have to replace the half shaft due to mfg burrs that tear up the seal. I know from experience after having 3 seals put in.
+Michael James yup I have videos on that too for the 6F35 in the Escape and Fusion
Getting ready to do this job on my Escape (bushing/seal)
I've noticed from your many videos, that it always seems to be the driver's side that fails. Is that due to the CV stub being longer on that side, or is there just not a bushing on the pass side?
Nice video
Do you have a video on replacing 6f50 transmission fluid? I didn't see one, but figured I would ask. Thanks for all your videos, they are very helpful.
You can just follow my 6f35 video they are quite similar.
Thanks for the video. Is that amount of movement normal? (When you grabbed the mixed the inner cv after fitting).
Nice traxxas summit's!!!! 👌
Nice to have a new shop with a lift, that was always my dream, a lift.
It will be great the best part of it all.
Great video! Who makes that seal installer ?
The bolts on these aren't like the ones on the trucks,one time only use? Thanks for the videos.
Needing to do this for a 2011 MKZ awd I just but for the passenger rear axel seal. On the rear axel you can’t even get a slim 3/8 ratchet in to check the fill plug so I can see the level due to clearance issues.
@ 16:15 If no grease on the seal (on rubber part inside), what grease to apply? I have automatic (2001 Saturn SL2). The seals I bought are Timken 4614N Seal and National 4613N Oil Seal. What Seal Installer was used? Is it fm/Amazon? Thank you for the great film, really the best on the project.
Thanks, Brian for the video. How much should a shop charge for labor for this job?
I see it's the same one your did the valve cover on.
Actually noticed the stained air filter before the shiny clean cover.
+CamperMike Yup many problems on this one first year of the new generation Explorer
Question rear axle seal 2009 Edge can u just remove the wheel bearing and pull the axle thru the knuckle? Nic vid Cheers
Brian I watch your video's everyday, my Ford F150 has about a 100,00 miles on it.the gas milage is though the roof.
whats the best way to get the most from my 5.4 3V its only a 2009?
Great job, working on my 2012 Ford Edge SEL, how may oil seals in this transfer case? thanks,
Doing the same for our Toyota Corolla 2004, I expended nearly 2 hours trying to get the seals in (both sides) I do have a seal tool from Harbor Freight, it fits the seals nicely but no matter what I did, always one side gets in the opposite side out, tapping around it did not help either, used 3 different hammers carefully, nothing, after 2 hours i decided to leave it and will try again tomorrow, my seals looks exactly like the one here and the seal tool very similar. I do not want to tap on the edges of the seal afraid I could destroy it, the position I am in to do this makes it even more difficult as i can only lift the car so much, kneel by the driver side allows me to kind of get in a comfortable position to tap the seal in but even like that i could not drive it in straight; top is in while bottom is completely out and now it doesn't even come out, the passenger side is worst (The engine is out of the bay, only transmission in) I can get my body inside the engine bay then kneel with the car raised to max as the jack allows me under the crossmember frame (two jacks support the car on both sides besides this one for safety) but then again no matter how I pound it in, if I tap hard the seal gets in one side and the other out and if I go gentle tapping nothing happens; this is very frustrating! tomorrow with daylight I will try again, this supposed to be easy!!
Great job! Noticed there was no hub center cap, is there none on these vehicles? You look happy about your new shop, congrats!
My front tires don't have center hub caps. Maybe it's just a back tire thing.
Thank you
Me gustaria que hicieras los videos con sustitulo me encanta sus videos que palabras que entiendo ún poco yo tengo una for escape 2010 quisiera aprender mas
My '08 ford explorer xlt has one front and one rear axle seal leak. I am wondering if it is worth it to replace CV axles or just the seals? Vehicle has 107k miles. Thanks and awesome video!
Do you have any video showing how to replace the motor and transmission mounts on a f150?
fordtechmakuloco question pls .. what seals are used on the half shaft or intermetate shaft on ford edges awd? the one side i believe nok xe0269e the other side has no no marking that i can see but its very rusty?
Hi Brian, would the procedure be the same/similar to replace the front diff axle seals on my 4x4 2010 Ranger XLT? My front diff seals are leaking...
Thanks!
way to go looks like you tube bought you a new home lol😄
+Desmond Blyan pretty much the wife works really hard too making this all happen.
Good stuff looks like you worked hard and deserve every bit
@FordTchMakuloco. Are the bushing puller tools like you used for the bushing even available to rent, or purchase? Looks like something to have in the tool chest.....
Working on a 2010 Mercury Milan w/4cylnder with an automatic trans, left side is bad. I see that it's a dealer seal-kit so you have to go by VIN. For these vehicles, Ford built transmissions here in the US, plus they had transmission's shipped her from Asia. That's what turned it into having to call a Dealership for the correct Seal-kit.....
I replaced the passenger side cv axle because I heard a clicking when turning. Afterwards I noticed a leak that burns on the exhaust. so I changed the seal just as you did in your video. I still have a leak coming from the seal. Do you have any idea what could cause the leak? Can this be fixed or does the shaft need to be replaced?
On the ptu passenger side. Do you have a part number for plastic deflector installer? Or what you use
On some vehicles there is also a seal on the steering knuckle which needs to be replaced whenever the cv joint is removed not sure if this Ford has one.
very good
I did have a question. Are you going to modify ford's as well as the other brands aka mopars etc. Just was curious
can you please put a link in the description for a seal installer tool that will work on a 1997 ford escort? thanks
how do you know there is not a inner bearing causing problems as there were with other ford transmissions?
What seal installer tool do you use and is there a different one for each side because the seals aren’t the same?
Changed it last year and still leaks so my question is could the sound I hear while driving be the axle itself that’s worn out and causes the leak (sounds wobbly and louder as the speed goes up)
are the f150 front differential axle stubs the same as this ? like do they just pop back in and lock with the c clip ? i changed out the driver cide cv axle on my f150 and after it noticed the stub shaft has started to pull out of the differential any advice ???