Hi, Great video as always with loads of information, most of the lubes are readily available but I can't the powdered moly anywhere could you please let me know where it is available to buy. Cheers .
For this one its quite tight and stays on of its own will but some valves need just a little loctite to secure the brass sleeve, I tried 6 FX bottles and 2 were a nice tight fit and the other 4 were a little loose and required a drop of loctite. Thanks for watching.
Cheers for that video I’m getting a second bottle for the m3 and wanted to know how easy it is to put on the brass sleeve, if it just slots on it without taking the valve out then happy days 👍
Yep, no need to remove anything, just slide the new one on, the ones we sell we recommend a little loctite to stop the sleeve falling off. Thanks for watching.
Yep the brass sleeves will be coming next week, and the bottle thread is the same as the L2, you have to be-careful on length though I think only the 300cc bottle fits on the L2 without hitting the grip.
just got a Maverick and when i unscrew the bottle after adjusting regulators the bottle just empties the air and needs refilling when screwed back onto the gun, any idea what that issue is?
Sounds like the valve is getting stuck or the valve face has some damage on it, you can take the valve out the end of the bottle and take a look, if the face is not damaged you might get away with adding a bit of silicone grease to free it up. Thanks for watching.
@@sub12airgunners I managed to fix the valve thank you, also seems FX neglected to fit an O'ring inside the bottle valve and I am having a nightmare trying to fit it any tips? it is really tough to manipulate into the seat
@@KnowsleyVerminControl Make sure there isn't still one in there its hard to spot, try to feel with a pic or cocktail stick, if its not in there coat the new o ring with silicon grease and just try and work it in, its not easy but it does on in. Thanks for watching.
Its not a standard part but its the ergo tactical deluxe grip, very nice little upgrade, they sell them at brownhills but you have to be quick they go out of stock very fast.
Nice video. Have you ever tried the huma second reg for the impact mk2? They show you have to cut down the bottle valve for some reason, do you know why? Thanks.
I have never fitted one but it looks like the bottle is no longer removable, so the one way valve inside the bottle is no longer needed and they have you cut it off, to stop it interfering wit the external reg. Thanks for watching.
Thank you very much for this video, i think I need to get a new pin valve for mine. Any recommendations on where to get hold of one? Tank you for posting the video really fast. Your work is very much appreciated 😁👍👍👍👍👍👍
Thanks, not sure you might be able to get one from sportsman gun center, although you may have to call them as I don't think all parts are listed on the website. Thanks for watching.
@Slipveste hi i managed to get the complete part from sportsman gun centre in Exeter they are able to supply the complete part to attack to the bottle they don't have just the valve on its own. The complete assembly cost me £80. Hope this helps you
Although I Really liked your video, and appreciate your prospective on FX bottle valve disassembly (which I just did and learned 2 days ago) it's the sub 12 BS that stops me from subbing.I appreciate you bro, but my "low" set Maverick with 18's is doing 45 fpe... sub 12 fpe, why bother?... that's kids stuff. GREAT informational video, but sub 12, that's what I would give my 6 year old. I'm SO sorry for your government's oppression.
Fair enough, but why bother with air rifles if you can have a real rifle, seems strange to spend more money on an inferior type of rifle, you could buy/ build a nice .22lr for the same money as a maverick, that will be more accurate, more reliable and nicer too shoot. Thanks for watching
Great video again. Thank you. I noticed that filling the bottle was slower than the mk2 and now I know why. 👍
Glad it helped, Thanks for watching.
Great video. Do you add any locktite to the valve assembly when refitting to the bottle?
thanks for the video very informative keep up the good work
Thanks, will do!
Excellent video mate , i have been waiting for this
Glad you enjoyed it
Hi,
Great video as always with loads of information, most of the lubes are readily available but I can't the powdered moly anywhere could you please let me know where it is available to buy.
Cheers .
thank you😀 i believe chambers sells it in user friendly sizes 👍
Is that valve seat similar with the valve seat located in the reciever valve body?
So the brass sleeve won't fall out ? Excellent video as always- I can't believe the modest view count... they don't know what they're missing !!
For this one its quite tight and stays on of its own will but some valves need just a little loctite to secure the brass sleeve, I tried 6 FX bottles and 2 were a nice tight fit and the other 4 were a little loose and required a drop of loctite. Thanks for watching.
Very informative, thanks 😁👍
Glad it was helpful!
Cheers for that video I’m getting a second bottle for the m3 and wanted to know how easy it is to put on the brass sleeve, if it just slots on it without taking the valve out then happy days 👍
Yep, no need to remove anything, just slide the new one on, the ones we sell we recommend a little loctite to stop the sleeve falling off. Thanks for watching.
@@sub12airgunners cheers. Im wondering if the valve pins on the best fittings bottles are the same as the fx ones? 🤷🏼♂️🤔
Great vid as per 👍 are you doing the brass sleeves ?
Is the m18 internal bottle thread the same for L2 bottles ?
😎👊👍
Chris
Yep the brass sleeves will be coming next week, and the bottle thread is the same as the L2, you have to be-careful on length though I think only the 300cc bottle fits on the L2 without hitting the grip.
can you update the ebay link to buy the brass spacer? it seems that your link no longer exists
Will this work for reximex throne 2
Ako sa volá ten kľúč na odtiahnutie toho ventilu.Dakujem
just got a Maverick and when i unscrew the bottle after adjusting regulators the bottle just empties the air and needs refilling when screwed back onto the gun, any idea what that issue is?
Sounds like the valve is getting stuck or the valve face has some damage on it, you can take the valve out the end of the bottle and take a look, if the face is not damaged you might get away with adding a bit of silicone grease to free it up. Thanks for watching.
@@sub12airgunners I managed to fix the valve thank you, also seems FX neglected to fit an O'ring inside the bottle valve and I am having a nightmare trying to fit it any tips? it is really tough to manipulate into the seat
@@KnowsleyVerminControl Make sure there isn't still one in there its hard to spot, try to feel with a pic or cocktail stick, if its not in there coat the new o ring with silicon grease and just try and work it in, its not easy but it does on in. Thanks for watching.
10/10 again did that pistol grip come with the m3 if not where can i get one.. cheers Jeff.
Its not a standard part but its the ergo tactical deluxe grip, very nice little upgrade, they sell them at brownhills but you have to be quick they go out of stock very fast.
Nice video. Have you ever tried the huma second reg for the impact mk2? They show you have to cut down the bottle valve for some reason, do you know why? Thanks.
I have never fitted one but it looks like the bottle is no longer removable, so the one way valve inside the bottle is no longer needed and they have you cut it off, to stop it interfering wit the external reg. Thanks for watching.
Great video. Do you have the vakve seater for sale?
Buenas también se puede montar el regulador a la mk2 y hacerle el mismo trabajo a la botella convertirla a M3 ??
Where can you buy the brass piece
Where to buy valve steam?(rod)
Thank you very much for this video, i think I need to get a new pin valve for mine. Any recommendations on where to get hold of one?
Tank you for posting the video really fast. Your work is very much appreciated
😁👍👍👍👍👍👍
Thanks, not sure you might be able to get one from sportsman gun center, although you may have to call them as I don't think all parts are listed on the website. Thanks for watching.
@@sub12airgunners thank you will give them a call Monday 👍
Hi thx very much for your video ! I was asking to myself the same than Luis , I don’t know where I can order a pin valve …
@Slipveste hi i managed to get the complete part from sportsman gun centre in Exeter they are able to supply the complete part to attack to the bottle they don't have just the valve on its own. The complete assembly cost me £80. Hope this helps you
hi are the chineese tuxing pcp bottles any good
not had the tuxing bottle but lots of reputable company's sell them i think they are just re- branded allsafe and they are fine
Where can i get the brass spacer from and thank you for the video
I sell them on Ebay, link below Thanks for watching.
www.ebay.co.uk/itm/373648618326?hash=item56ff317356:g:7SEAAOSwvilg7gZy
@@sub12airgunners it says uk buyers only. I’m in the usa can i still order ?
@@rolandorivas6388 Sorry we don't ship outside the UK, its cost prohibitive to send to the US. Sorry.
Amazing 👍👍👍
Thanks for the visit
@@sub12airgunners 🤝🤝🤝
Sweet 👌👏😃
Thank you! Cheers!
What are the sizes of the o’rings? Thx
Cant remember off the top of my head, have a look on the exploded diagrams on the FX site they contain all the sizes. Thanks for watching.
can someone give me the measurements of the spacer,
thank you very much
No locktite correct
No need for locktite on the valve 😀
@@sub12airgunners thanks 😊
Sir I need this air gun how much dollars how much India rupees
I guess 2.4 - 2.8 lcs..
Although I Really liked your video, and appreciate your prospective on FX bottle valve disassembly (which I just did and learned 2 days ago) it's the sub 12 BS that stops me from subbing.I appreciate you bro, but my "low" set Maverick with 18's is doing 45 fpe... sub 12 fpe, why bother?... that's kids stuff. GREAT informational video, but sub 12, that's what I would give my 6 year old. I'm SO sorry for your government's oppression.
Fair enough, but why bother with air rifles if you can have a real rifle, seems strange to spend more money on an inferior type of rifle, you could buy/ build a nice .22lr for the same money as a maverick, that will be more accurate, more reliable and nicer too shoot. Thanks for watching
Sell it to us in China.6800$