This helped me fix my Razer Taipan! I had already taken it apart 3 times and tried putting a bit of tape on the top of the clicker to make it press deeper but that wouldn't work. Adjusting the spring has fixed it perfectly and the click feels as deep as it was originally. Thanks!
thanks alot you just saved me alot of money. every video suggest replacing the switch box which needs soldering youre the only one who opened it and fixed the actual box.
I have been using G300s for 8 years. I'm on my second one for my desktop and I have one on my laptop. Great mouse. I did this fix years ago and remember it being a chore. I decided to look for videos to see if there were some tips before I tried to do it again. I was pleased to see that one of the first videos that popped up had my same mouse. Your description about reinstalling the copper part really helped. Flat end under the hook first and then the loop end slides in sideways under the hook at the other side. Very easy. Saved me a bunch of time, learned how the piece flexes to make the mouse click, and picked up a new skill. Thank you.
okay, not showing the part where you actually remove the cover is not cool. if you ever re-record this video or update it, just make sure you do that, and if you forget, then just go back and fix it. if it's a part where people need to be careful while doing it, bc otherwise they might damage or lose pieces, then its maybe, just maybe, a good idea to actually show how to do it well
Thank you man I fixed my double clicking mouse using your guide. Although the click feels a little bit harder to press, you saved an old logitech mouse from going into trash!
I was able to use a tweezers to bend the metal clip up without taking it off. Fixed my Zowie FK1 mouse in just five minutes. Works perfect, other than needing replacement rubber sliders lol.
Just got done fixing my mouse, thanks for the video. Tip to everyone else, be very careful using the flat head to remove the black cover. I slowly removed it with a small flathead. The biggest pain for me was putting the spring back in.
I'm so thankful a guide like this exists! Unfortunately, when I took off the cap for the switch, the button flew off on both and I couldn't find them cause they're so small, so be careful. Luckily I had a spare mouse to take them from, so yeah!
Might try this sometime this week, my mouse recently double right clicks on 1 singular click, otherwise going to replace it, so nothing to lose with trying this.
Thanks brother for posting this video , really helped me fix my logitech mouse A tip for others , use a polyethene bag and then keep the mouse inside it and perform whatever switch you have to fix because the copper switch is pretty springy Also take a picture with closeups from each angle before starting to fix the curve
That worked for Logitech M185, thank you. Also you don't have to take out the metallic part, I think better to squeeze it in place with some tweezers, otherwise putting it back not an easy task.
Jesus Christ, I've repaired many things in my day, but getting the little thing back on was one of the most frustrating things I've had to endure in a long while. HyperX apparently uses an especially tricky switch design. I spent more than an hour trying to get everything back into place. No double clicking though, so thanks for the video man! Next time I think I'll just buy a new mouse though. This was not worth the nuisance.
Thank you so much man, I got a Glorious model o and its left mouse button was clicking if I put to much pressure now when i click it doesnt happend anymore I thought of buying another one but I tried to fix it first and I ended up not buying another model o You earned a sub
If you are a minecraft bedwars geek, you would like hes mice. Considering bedwars player use double clicking mouse to click faster. Someone mouse use it as a feature by settnig the debounce to 0. this mouse is good, but id rather use adjustable debounce time mices.
When I got to the step where I was supposed to bend the spring, I stopped. My spring had good tension. It wasn't sticking. So I removed PCB, washed the plastic parts of the mouse using warm water and a tooth brush. Then I blew the parts dry with canned air and reassembled. Maybe that will do it.
me who fixed this issue same way, didn't know it's called double click, I called it too sensitive switch. was looking for people having issue with mice after 6 months of usage.
I gave up trying to take the cover off after trying multiple times, so I just stuck a piece of tape over the switch and called it good lol. At least it works now
Great video. Unfortunately, the mouse I tried to fix, Logitec G602, has much smaller springs and it was futile. So, I reprogrammed the buttons so the Right Click Button is now the Left Click Function and one of the side buttons controls the Right Click Function. It's not too bad. I'll get used to it. Thanks for the excellent video and the written description. BC
dude, use AutoHotkey to run this script and the double clicking will be gone : LButton:: If (A_TimeSincePriorHotkey < 150) ;hyperclick Return Click Down KeyWait, LButton Click Up Return
Thanks for postingthis online, I already fixed my mouse as per your instruction but one thing I noticed about my mouse is the switch I think placed in a wrong way for mine in the mouse factory I mean... The white button of the switch is on the left side of the switch box but its curve is on the right side.. Is there something wrong with that?
Oh.... so you're telling me i went on a manic episode completely destroying my mouse for nothing? "it is literally thorn to pieces every part of it out of anger"
Can you make a tutorial that helps with the mouse, because i've changed the mouse 2 times and it's still double clicking, can u fix it with the laptop?
ok you dont have to do all that. I just grabbed my air duster can and sprayed into the gap of the mouse button and it fixed it all. Also cleaned up a bit with a cotton bud inside the mouse and around the button.
Thanks. I was emboldened to dismantle my mouse ans fix it with 5x eyeglasses{when you are over 40}, spit{or masking tape to hold the button in place{, screwdriver, needle and tweezers.
You can just open the side button or any slightly used one and just change the spring and you dont need to do the bending stuff "wich is working but dont last long and feels shit".
Bought Razer Trinity.. after 3 weeks it start clicking double.. i tried to click from different angles, and make myself so uncomfy doing it.. but now no matter from which angle i press it it does the same.. I really can't believe it.. Having friend his start doing that after 3 years lol.. i am just unlucky i guess
BEFORE YOU START what's not mentioned is that each of these micro switches are constructed differently, and many rely on precise placement by machine. If you are here watching this video to fix your mouse you are FAR BETTER OFF learning to solder or replacing the mouse, your likelihood of success is low.
i fixed it without disassembly by pressing the left and right click buttons hard, but not too hard until it breaks for 10 seconds, blowing through the holes on the mouse where the click buttons are and shaking rapidly, repeating until it works. my mouse was double clicking 50% of the time and now it only double clicks once out of every 100 clicks, thanks reddit
@@Clathios im gonna be honest, this worked for like a couple hours and the double clicking came back, i had to manually unbend the copper spring in the mouse in order to fix it for a couple days and it would break again. better to just buy a new mouse, preferrably an optical switch mouse so you don't have to deal with double clicking in the future. Just bought a zowie sc-2 and im confident it will never double click again
Open an old mouse, open the microswitch recctangular box, take out the wierd shaped metal thingy, stick it in your broken mouse, no soldering required. If you don't have an old mouse, order a microswitch for a couple dollars and take that metal thingy out.
pro tip: fuck this noise, today i had a Q tip on my desk and decided to rip a bit of cotton off and stick it in front portion of the left click next to the scroll wheel. problem fucking solved.
DO NOT ATTEMPT THIS, you will just break that tiny spring and then you will have to buy new mouse eventually. because this dumb@ss didn't show the most crucial part, which is how to remove that spring mechanism because once it's bended at those side tiny bars it's not going to work no matter what you do. luckily i had an old non working mouse which i directly unsoldered the connection and used that on my current mouse... and it's safe. just go buy those tactile buttons from electric hardware shops and solder it instead of trying to fix the spring because it works if you know how to remove that spring carefully.
lol RIP to my G602, time to buy a new one. i tried, the little copper piece is soooo thin like paper, its done. well, it lasted longer than expected. got it in summer of 2019, so well worth it i guess. thanks for the video.
After I'd reassembled my mouse I clicked the like-button, but it instantly unliked it. So since the tutorial didn't work I clicked the dislike button, and again it instantly undisliked the video!
Did this help you fix your mouse? What mouse are you rocking?
if you asked me zebronics mouse
@@tanishkprem7422 Haven't seen them before, they do seem to have some interesting peripherals
@@PearCrew it's an indian brand
no, it didn't help very much. my mouse is MIXIE
DONT DO THIS YOU CAN JUST ADJUST THE DEBOUNCE TIME AND TURN THE DEBOUNCE TIME TO THE MAX AND NOT ON 0 OR IT DOUBLE CLICK
This helped me fix my Razer Taipan! I had already taken it apart 3 times and tried putting a bit of tape on the top of the clicker to make it press deeper but that wouldn't work. Adjusting the spring has fixed it perfectly and the click feels as deep as it was originally. Thanks!
thanks alot you just saved me alot of money. every video suggest replacing the switch box which needs soldering youre the only one who opened it and fixed the actual box.
Thank you man my mouse is working perfectly now 🎉❤
I have been using G300s for 8 years. I'm on my second one for my desktop and I have one on my laptop. Great mouse. I did this fix years ago and remember it being a chore. I decided to look for videos to see if there were some tips before I tried to do it again. I was pleased to see that one of the first videos that popped up had my same mouse. Your description about reinstalling the copper part really helped. Flat end under the hook first and then the loop end slides in sideways under the hook at the other side. Very easy. Saved me a bunch of time, learned how the piece flexes to make the mouse click, and picked up a new skill. Thank you.
I also love G300!
i do everything you said step by step with care. now im using my new bought mouse
hahah :/
😂😂
okay, not showing the part where you actually remove the cover is not cool. if you ever re-record this video or update it, just make sure you do that, and if you forget, then just go back and fix it. if it's a part where people need to be careful while doing it, bc otherwise they might damage or lose pieces, then its maybe, just maybe, a good idea to actually show how to do it well
Does it have any trick to be removed? im strugling
fr
Thank you man I fixed my double clicking mouse using your guide. Although the click feels a little bit harder to press, you saved an old logitech mouse from going into trash!
Pro - it's working.
Con - the button doesn't feel the same.
But at the end of the day I get to use my favorite mouse again so thumbs up.
its a good tip if you dont want to change your mouse early, however, the button feeling will never be the same.
pro tip: for faster fixing trow your mouse very hard at the wall
OMG OMG THANK YOU YOUR A LIFE SAVER
bruh thanks it acc worked
bro, it worked
it actually worked
Funny tips but working
I was able to use a tweezers to bend the metal clip up without taking it off. Fixed my Zowie FK1 mouse in just five minutes. Works perfect, other than needing replacement rubber sliders lol.
Just got done fixing my mouse, thanks for the video. Tip to everyone else, be very careful using the flat head to remove the black cover. I slowly removed it with a small flathead. The biggest pain for me was putting the spring back in.
I'm so thankful a guide like this exists! Unfortunately, when I took off the cap for the switch, the button flew off on both and I couldn't find them cause they're so small, so be careful. Luckily I had a spare mouse to take them from, so yeah!
Might try this sometime this week, my mouse recently double right clicks on 1 singular click, otherwise going to replace it, so nothing to lose with trying this.
total life saver!! you saved me from having to buy a new mouse
You're welcome man, I'm glad it worked for you! :)
Nobody likes the part with the buying a new mouse. :D
used the spring from another dead mose I had lying around you saved the life of a mouse today thank you
Thanks brother for posting this video , really helped me fix my logitech mouse
A tip for others , use a polyethene bag and then keep the mouse inside it and perform whatever switch you have to fix because the copper switch is pretty springy
Also take a picture with closeups from each angle before starting to fix the curve
I have the reverse problem. It doesn't register the double clicks
it took alot of time but it was worth it thanks for sharing such an amazing trick. i won't have to buy a new one
Thank you. For me, I tugged the front side a little bit over the latch beneath it so that it feels more stable to the touch and has the clicky sound.
You're welcome! I'll keep that tip in mind when performing this fix again. :)
Thank you sir, this was easier than expected, double click fixed
That worked for Logitech M185, thank you. Also you don't have to take out the metallic part, I think better to squeeze it in place with some tweezers, otherwise putting it back not an easy task.
this helped me fix my Roccat Leadr mouse, but I will say putting the copper part back in the switch is hard borderline very hard
Jesus Christ, I've repaired many things in my day, but getting the little thing back on was one of the most frustrating things I've had to endure in a long while. HyperX apparently uses an especially tricky switch design. I spent more than an hour trying to get everything back into place. No double clicking though, so thanks for the video man! Next time I think I'll just buy a new mouse though. This was not worth the nuisance.
Great, fixed my Logitech with this video, thanks!
I have to ask. Does pushing the tab upwards mean making the curve more pronounced or more flat?
I've spent hours trying to put the copper back in place!
I almost give up and buy new one which is expensive. Still trying here
Thank you so much man, I got a Glorious model o and its left mouse button was clicking if I put to much pressure now when i click it doesnt happend anymore
I thought of buying another one but I tried to fix it first and I ended up not buying another model o
You earned a sub
thats coz ur debounce time is lower than 10 probs, just fix ur debounce time lol
@@helioks even if i set the debounce time to 16 it still doesnt fix it lol
@@qjam702 lol but you know Model o double click? It's for Minecraft gaming
@@erenyeager7603 oh so if I put the denounce time to 12 it still double clicks?
@@erenyeager7603 it's not the software it's the actual switch itself it's overused
Is a brand new mouse cause the other one the left click aint working. But this new one double click.
took an hour for that lil sht coil but it WORKEDDDDD
Thank you, i just fixed my precious mouse due to your help
If you are a minecraft bedwars geek, you would like hes mice.
Considering bedwars player use double clicking mouse to click faster.
Someone mouse use it as a feature by settnig the debounce to 0.
this mouse is good, but id rather use adjustable debounce time mices.
bro its very dogshit like imagine u are doing something and it starts double clicking like mine did its annoying af
Thank you for this tutorial and now i buy a new one
😅😂
When I got to the step where I was supposed to bend the spring, I stopped. My spring had good tension. It wasn't sticking. So I removed PCB, washed the plastic parts of the mouse using warm water and a tooth brush. Then I blew the parts dry with canned air and reassembled. Maybe that will do it.
me who fixed this issue same way, didn't know it's called double click, I called it too sensitive switch. was looking for people having issue with mice after 6 months of usage.
I have a blue finger gaming mouse and I have to click the left mouse button twice just for it to respond me clicking it
I gave up trying to take the cover off after trying multiple times, so I just stuck a piece of tape over the switch and called it good lol. At least it works now
Great video. Unfortunately, the mouse I tried to fix, Logitec G602, has much smaller springs and it was futile. So, I reprogrammed the buttons so the Right Click Button is now the Left Click Function and one of the side buttons controls the Right Click Function. It's not too bad. I'll get used to it. Thanks for the excellent video and the written description. BC
dude, use AutoHotkey to run this script and the double clicking will be gone :
LButton::
If (A_TimeSincePriorHotkey < 150) ;hyperclick
Return
Click Down
KeyWait, LButton
Click Up
Return
Thanks for postingthis online, I already fixed my mouse as per your instruction but one thing I noticed about my mouse is the switch I think placed in a wrong way for mine in the mouse factory I mean... The white button of the switch is on the left side of the switch box but its curve is on the right side.. Is there something wrong with that?
Oh.... so you're telling me i went on a manic episode completely destroying my mouse for nothing? "it is literally thorn to pieces every part of it out of anger"
Can you make a tutorial that helps with the mouse, because i've changed the mouse 2 times and it's still double clicking, can u fix it with the laptop?
My mouse gets into this problem on both clicks, is this an issue or electronics?
My dear I purchased a new mouse still that problem persisted
Thank you, sir. You save my life today.
Thanks, my click working fine now. Fixing the clip is very difficult but now it's done. 👍👏🙏🤗
Hello What type of camera has been used to make this video ?
This was very helpful, thank you for this video.
I have the same mouse as you and I am having same problem on both right and left click
dude this help me fix my razor mouse thank you
Found nothing close to my mouse and this guy literally has the exact model as mine wow thanks. But I came for the very part you didn't record lmao.
Pro tip
Use a floss pick to open the cover
tried to like but my mouse unliked the video
why?
@@trevorgeorgesgolamco5333 the joke is that i tried to like the video but my mouse clicked again because double click
Advanced humor
i had trouble opening the replies for this comment
How to do part 1: take off the switch cover ? Most difficult part that you didn’t show…
Yeah facts.. most important part of the video
thankyou bro just liked your video with a single click
how to on razer?
ok you dont have to do all that. I just grabbed my air duster can and sprayed into the gap of the mouse button and it fixed it all. Also cleaned up a bit with a cotton bud inside the mouse and around the button.
Thanks. I was emboldened to dismantle my mouse ans fix it with 5x eyeglasses{when you are over 40}, spit{or masking tape to hold the button in place{, screwdriver, needle and tweezers.
Happy to hear this gave you the push to perform the fix. Enjoy your mouse! :D
You can just open the side button or any slightly used one and just change the spring and you dont need to do the bending stuff "wich is working but dont last long and feels shit".
i have a spare mouse but i will try a software that just blocks the 2nd click . any1 here that knows a good software?
AHK (v1)
import this script :
LButton::
If (A_TimeSincePriorHotkey < 150) ;hyperclick
Return
Click Down
KeyWait, LButton
Click Up
Return
Aaand he's back😁
bro it didnt work i dont know how to get the latch off without breaking it
WOW! made me fix my mouse. Thank you soooooooooo much!! You're my savior
Bought Razer Trinity.. after 3 weeks it start clicking double.. i tried to click from different angles, and make myself so uncomfy doing it.. but now no matter from which angle i press it it does the same.. I really can't believe it.. Having friend his start doing that after 3 years lol.. i am just unlucky i guess
mine is not clicking anymore unlike the right button
Cheers for the video, just fixed my mouse ;D
BEFORE YOU START
what's not mentioned is that each of these micro switches are constructed differently, and many rely on precise placement by machine. If you are here watching this video to fix your mouse you are FAR BETTER OFF learning to solder or replacing the mouse, your likelihood of success is low.
i fixed it without disassembly by pressing the left and right click buttons hard, but not too hard until it breaks for 10 seconds, blowing through the holes on the mouse where the click buttons are and shaking rapidly, repeating until it works. my mouse was double clicking 50% of the time and now it only double clicks once out of every 100 clicks, thanks reddit
haha thx man you saved my time❤
@@Clathios im gonna be honest, this worked for like a couple hours and the double clicking came back, i had to manually unbend the copper spring in the mouse in order to fix it for a couple days and it would break again. better to just buy a new mouse, preferrably an optical switch mouse so you don't have to deal with double clicking in the future. Just bought a zowie sc-2 and im confident it will never double click again
@@Clathios because it registers clicks with light instead of very thin copper springs, you could breathe on the copper and it would fly away
Open an old mouse, open the microswitch recctangular box, take out the wierd shaped metal thingy, stick it in your broken mouse, no soldering required.
If you don't have an old mouse, order a microswitch for a couple dollars and take that metal thingy out.
what if u want to do the opposite make it double click
You can setup a macro from your mouse software. Modifying the switches by hand will probably not yield reliable results :)
@@PearCrew okie ty
way to go, now my bloody v8m working excellent. Thanks!
pro tip: fuck this noise, today i had a Q tip on my desk and decided to rip a bit of cotton off and stick it in front portion of the left click next to the scroll wheel. problem fucking solved.
my glorious model o 2 is just 3 months old😭😭😭
I fixed my mouse thank you
Glad it helped :)
squeeze the buttons and blow air into it
thanks, i tested on my old mouse and fixed it
And I have been downloading drivers for a week ...
I can't figure out how to open the switch covers for the life of me...
my clicks keep making this video fullscreen lmao.
Wish I could actually open my roccat kova like this. :(
I did that on my Roccat Tyon three times. Metal aging and oxidation happens. Sadly on many expensive mice no quality switches are installed.
my problem turned out to be gunk
Now make a tutorial on how to make a mouse double click
DO NOT ATTEMPT THIS, you will just break that tiny spring and then you will have to buy new mouse eventually. because this dumb@ss didn't show the most crucial part, which is how to remove that spring mechanism because once it's bended at those side tiny bars it's not going to work no matter what you do.
luckily i had an old non working mouse which i directly unsoldered the connection and used that on my current mouse... and it's safe.
just go buy those tactile buttons from electric hardware shops and solder it instead of trying to fix the spring because it works if you know how to remove that spring carefully.
thank you i can now abuse my mouse again
got exact sane mouse and exact same problem
This was too hard for me so I decided to do the
Neanderthal way and job done !!!
lol RIP to my G602, time to buy a new one. i tried, the little copper piece is soooo thin like paper, its done. well, it lasted longer than expected. got it in summer of 2019, so well worth it i guess. thanks for the video.
tried doing this, broke my mouse, ironic part: it stopped double clicking, i guess i got what i asked for
After I'd reassembled my mouse I clicked the like-button, but it instantly unliked it. So since the tutorial didn't work I clicked the dislike button, and again it instantly undisliked the video!
How ironic to have the exact same mouse. lmao
Doing the exact opposite to double click on Minecraft
man poverty sucks, my mouse is 6 years old double clicking, randomly dying, RGB lights fading, and MB4 broken🤣🤣🤣🤣
Razer naga trinity best mouse but right click goes vroom vroom now
thanks a lot
At this point I'm just gonna buy a new mouse
thanks it worked
Ok I dont know how to open my mouse
get a new mouse people. this sounds too stressful for butterfingers like mine
Good job I don't have you fingers then
Exactly what I was thinking
nice
Wow you're fast man. Glad you liked it ;)
I cant do this. I am about this close to swear that is a man thing. I am not able to do that. I feel stupid.
lifesaver
comment for the algorithm :D
Somebody knows how the business works xD