@@echo.motion Great choice, I personally prefer Yoshimura sound, but am getting the c4 to reduce weight and get a more cleaner look on the bike, but you’ll definitely love it
I finally found a Shogun protection kit online at Cycle Gear. For weeks they’ve been sold out everywhere I looked. I installed them on my 2021 ZX-6R today. I used a click type torque wrench. I heard the click on the rear spools. I got the frame sliders really tight but never heard the click. I was too afraid of breaking off the bolts so I stopped when I felt they were tight enough but no click. Used the loctite blue also.
I had the shogun sliders for a week before I installed them and the worst part is I knocked my 636 over in my driveway while the sliders were in my room =D
Hey there, I really like your videos. Crisp, precise, and to the point with enough detail and explanation to not leave you clueless. I wanted to ask though,... where did you purchase your carbon fiber fairing pieces from? I cannot find much on ebay. Keep up the good work!
My left side also sticks out about half an inch less than the right side. I believe it's because there are more engine covers that come out further on the right side so just additional protection for them. Since these are made out of delrin, they're designed to file down as you're sliding...
I know I'm a year late to the party but my right slider is loose. Like the bolt is tightened to the appropriate torque but the slider itself can be wiggled back and forth, whereas the left side is held firm. Is that normal?
Definitely shouldn’t be loose. You sure you don’t have the left and right bolt swapped? I think they’re different lengths. If the are in the correct side you could put a washer or two on the bolt before you put it in the slider.
![ตีสิบเดย์ [FULL] | นางเอกหมอลำเงินล้าน "อุ๋งอิ๋ง เพชรบ้านแพง" & ไฮโซสาวสุดฮอต "ลิลลี่ เหงียน"](http://i.ytimg.com/vi/jPxQS_EgrJ4/mqdefault.jpg)
Gotta get the Sho Gun sliders for my 2020 636 KTR! Great Video!
Great video 👍🏼 Straight and to the point
Great video! Definitely going to re-watch your videos once I get my 2021 ZX-6R!
Am getting a 2021 too, in less than a month !!! Ride safe brother !
@@irvingramiro518 thank you. What color??
@@echo.motion Am getting the KRT Edition, but adding a crazy wrap color on top of it, also adding the C4 exhaust.
You ?
@@irvingramiro518 Nice! I got the white one. Thinking about getting the Yoshimura Alpha T2 exhaust.
@@echo.motion Great choice, I personally prefer Yoshimura sound, but am getting the c4 to reduce weight and get a more cleaner look on the bike, but you’ll definitely love it
Great video, thank you for the torque specs too!
Great straight to the point video 👍
nice video love that torque wrench
I finally found a Shogun protection kit online at Cycle Gear. For weeks they’ve been sold out everywhere I looked. I installed them on my 2021 ZX-6R today. I used a click type torque wrench. I heard the click on the rear spools. I got the frame sliders really tight but never heard the click. I was too afraid of breaking off the bolts so I stopped when I felt they were tight enough but no click. Used the loctite blue also.
Did you find the complete kit or just the two sliders for the frame?
@@robscherer Complete kit with the frame sliders, bar ends and rear spools.
@@Deeroc25 Gotcha, that is awesome, looks like they are sold out everywhere!
Great video
I had the shogun sliders for a week before I installed them and the worst part is I knocked my 636 over in my driveway while the sliders were in my room =D
Hey there, I really like your videos. Crisp, precise, and to the point with enough detail and explanation to not leave you clueless. I wanted to ask though,... where did you purchase your carbon fiber fairing pieces from? I cannot find much on ebay. Keep up the good work!
Hi there, you can try the crazy iron or impaktech crash cage
bro why my slider on the left look's like shorter than the right when its installed??
My left side also sticks out about half an inch less than the right side. I believe it's because there are more engine covers that come out further on the right side so just additional protection for them. Since these are made out of delrin, they're designed to file down as you're sliding...
@@eastcoastish okay thank you
What happens if you don’t have a wrench that measures pressure like yours
I typically use the German standard; Gütentight
I have TST industries frame sliders and they said to use 29.5 foot pounds. Weird
On 2:53 whats the torq wrench you use ?
Quinn torque wrench from Harbor Freight
what would happen if i install them without using the rear spool stand and install them with the bike just on the pegs?
You don’t need spools to install these…
Amigo soy de mexico donde pediste tus sliders?
I know I'm a year late to the party but my right slider is loose. Like the bolt is tightened to the appropriate torque but the slider itself can be wiggled back and forth, whereas the left side is held firm. Is that normal?
I'm on a 2023 ZX-6R if that matters!
Definitely shouldn’t be loose. You sure you don’t have the left and right bolt swapped? I think they’re different lengths. If the are in the correct side you could put a washer or two on the bolt before you put it in the slider.
Would those fit a 2018 model Zx6r?
No, body style changed for 2019
@@eastcoastish gotcha. Appreciate that. That helps a bunch.
No loc tite ???
The factory bolts didn't have loc tite; torque to spec and you should be good to go.