I bought a pressure washer, quick connects, 50-foot hose, wand and a low-cost foam cannon based on your recommendations and couldn't be happier with my setup. Everything works flawlessly and I have you to thank for it Josh.
Josh, you have taught me so much about the details of detailing. I recently have added these upgrades to my setup and they've made car maintenance so much more enjoyable. The only thing I did differently is I got the MTM sgs28 gun and built nozzles with rubber guards. Thanks for sharing the wisdom.
Very useful, thank you. I've been looking at upgrading my hose and gun and there's so many different connectors and adapters, it's hard to know which ones to get.
This man is seriously pumping out quality and consistent content daily. Like how do you run a damn business and upload TH-cam videos daily. It's insane. It really is. This man puts in fucking work!
One item that I've found to be quite helpful that you overlooked: adding a water shut-off valve to the hose (between the hose end and the QD adapter). It avoids having to make the trip to the house water valve before disconnecting the hose, and further avoids all that water gushing and spurting out of the hose when it's first disconnected. An added benefit is that it retains water in the hose, so the next time it's used, you don't have to wait for the air in the hose to be evacuated. And it also saves a tiny amount of water with each connection/disconnection.
@@SPPACATR Why do you think it would be bad? It wouldn't be any different than turning it off at the valve before disconnecting. You can even disconnect the M22 hose - turn the garden hose valve back on to flush it, turn it back off, and disconnect. I've been doing it for years with a Sun Joe SPX3000!
Josh!! This is hilarious! I just did this exact set up for my pressure washer. I used all the recommended upgrades you suggested, and it's awesome!! Can't beat the 50 foot hose upgrade, mind you I used the Flexzilla hose. Thanks for going into detail! Makes washing the car way easier! Cheers Bud!
Hi Josh, New sub here, I'm setting up a hotel reel, wall mounted set up. I am using my existing K2 karcher, is it possible to buy karcher to quick connect hoses?
Josh, I ended up making a new pressure washer setup based on videos you've made. Just got the final piece today (the Craftsmen 1700psi tiny one that you've shown before). I ended up getting that, a MATCC stubby pressure washer gun, a Black Max (Uberflex) 35' pressure hose, a 50' Flexzilla garden hose, a Griot's Garage Boss Foam Cannon, and a bunch of quick connect adapters. Tried it tonight to make sure everything works and there are no leaks, and it's perfect! Such a huge improvement over my completely stock Sun Joe pressure washer and $20 foam cannon I was using. Stupid question for you: how do you wind up your pressure washer hose? I was wrapping it up using my elbow and the palm of my hand as the two points of contact but I'd like it to be wrapped more tightly than that. I see yours is, so I'm wondering if there's an easy way I'm not thinking of.
Your the man bro....About a month and a half ago I pretty much bought the hose, connections, stubby and the like all from your suggestions. Absolutely love it and enjoy cleaning my vehicle....I always found it kind of ZEN when doing so. The neighbors though are talking lolz....They think Im perhaps a little crazy haha 😛😛
I've used this sprayer several times now on brick pavers, a wood deck, patio, and a driveway. th-cam.com/users/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX It has performed as expected on all surfaces. For larger areas like the decks and patios, I think I will be looking into a surface cleaner attachment to speed up the job, or at least make it a little easier. Hose and sprayer connections are tool-less, tight, and quick. I used the yellow nozzle on the concrete/brick surfaces, and the pressure was adequate for cleaning those surfaces.I am disappointed that these units are still being shipped with a nozzle storage holder that allows them to vibrate out of the holder way too easily and become lost, but I don't want to knock off a star for that reason. The functional part of the washer works very well, so I would recommend this product.
noob here....just to clarify, this kit will work, with the quick connects, on my 15mm stanley slp 2050 pressure washer? and, what mm is the hose attachment? thank you....
Nice!! I have the original Active and it surges 🤦♂️ I’m wanting to get something different but without breaking the bank. I was my car every Sunday and use all the right stuff. What’s your favorite sub $300 pressure washer? I guess the one with the most GPM is best.
i got the same setup but insted of buying a 22-15 to 22-14 adapter, i got a 22-15 and a 22-14 quick connects and used the male 22-15 and female 22-14 from each of the quick connects just to save some space and don’t have a very long set of connections between pressure hose and pressure washer.
Hey, need your help I ordered the uberflex hose and I have the simoniz 2100 platinum and the hose that’s attached to it if I remove it, it has a different connection to the unit itself. How do I make the uberflex connect to the actual unit itself.. without connecting an original hose to the uberflex hose.
Just bought a Simpson 3400 psi and all your recommended accessories. Just delivered today, so I need to connect all the quick disconnect fittings. Looking forward to using it to clean my boat and clean a few neighbors driveways. Find your videos very interesting and look forward to seeing them, thanks for making a boring subject fun to watch.
Just received & tested Ryobi 1600 / quick connects / hose / wand / mjjc foam cannon / 2.5/3.0 orfice. Getting ready to get started with my mobile detailing biz soon. Thanks for the great review! 🎉
Has anyone tried the supposedly stainless pressure washer connector kits out there like the "Mingle" kit? Hard to believe they're priced the same as the brass kits. I wonder if they're really stainless like the McKillans kit?
I got the 1900 Ryobi just yesterday , but am taking it back to get the 1800 (and $50) today! Matt at the obsessive garage channel says they both have the same pump and motor...but add a few fancy doo dads and slightly reduce orifice size to get the 1900 PSI. Vid title; The Pressure Washing Project: E23 - Testing The New Ryobi Products
Great tips josh I switched all to quick connect also did not like the hose holder so I bought a electrical cord reel and zip tied to the front it holds the 50 ft Uber flex hose perfect 👍
@@MrMykeymusic it was a black cord reel on Amazon 12 bucks and I put it an the face of the pressure washer I just wrap the hose around I did not like the original as the hose kept dragging on the ground
EXCELLENT series, Josh. You helped me decide to purchase and set up my first pressure washer (Ryobi TSS electric) and the necessary upgrades (hose, quick connects for starters). Saved me a long and frustrating learning curve. Especially appreciate your relaxed approach for first-timers. Well-done!
Great video as always! Thanks to your previous videos on these topics I upgraded my pressure washer hose and added all the quick connects to my setup which makes setting up a detail a breeze. Any chance we could get a review on one or a few steam vacuums?
Ive been watching your videos a lot, used your links to get my items. I am washing LARGE objects so it's wash a section, manual agitate, rinse. So I am switching from foam canon to nozzle pretty frequently. In this case, where are you putting your wash wand when you are scrubbing? I'm not goimg to put it on the ground and I am not using a cart that I could put it on.
Do you prefer or recommend Brass Quick Connect Fittings or the Stainless Steel ones? Is there a difference between the two materials for longevity? (I.e seizing…..)
I have a stupid newbie question: if you're using a 3200psi/2.5gpm washer, is there a specific hose that you need to connect from a water spigot to the pressure washer? Or just basic garden hose? That detail seems a little unclear to me. Thanks!
Hey Josh really hoping you can help me. I recently bought the “pressure washer set up” that you mentioned on your channel. One issue, the foam cannon is blasting out real “watery foam”. I changed the orifice as i am using a Karcher K3.170 electric pressure washer. Both 3M products i am using recommend 1oz 30ml of soap and then fill the rest of the bottle with water. Do i need to shake the bottle or stir the product once the bottle is full? Do I need to use more soap? Thanks you for your channel as you explain things really well and living at the end of the world (New Zealand) it’s really difficult to find these kinds of products in a retail store.
Thank you for the info! I’ve been dragging my feet on these upgrades for a year, and you just helped me pull the trigger😂🤫. Thanks for all of your content👍🏻🤘🏻
Just got a Greenworks 1800 psi 1.1 GPM power washer and the blue hose you suggest. Do I need the adapter? (Don’t have the box in front of me to look it up) And I bought the 2.5 orifice spray tips. So does the 40 degree tip bring it to the correct PSI? I think one of your other videos suggested this. Thanks!
Why does my total stop system stop working after I change out the stock hose and wand that the pressure washer came with for my new Uber flex hose and McKillans wand (I have Sun Joe SPX2688-Max electric)
I brought a STIHL RE 110 ELECTRIC WATER PRESSURE 2 Years ago Iv got an quick adapter for it : o, 25, 45, 60 and a soap one . Any suggestions adding a hoes replacement for stihl
I'm looking to build a washing station in my garage, what electric unit would you recommend under $300? I plan on getting your recommended upgrades with hose, reel, quick connects, foam cannons and wand.
Thanks Josh. I set up my pressure washers similarly with QD's, but at the high pressure unit output use a female QD fitting. That way it's just like electrical extension cords...male plugs in, then if desired, multiple hoses can be linked together for reaching way out for some project requiring that.
Sorry if you haven't addressed this in previous videos, but I have to ask. In this video, Retractable Garden Hose Reel! | How to store your garden hose | GiraffeTools Review, at the 2.15 mark, there is a hose real that has a grey hose hooked up to your pressure washer. Do you have a video on this or can you explain the set up. I'm only going to using my PW for auto details close to the garage and that would be perfect. Also, today (May 30) I picked up the SunJoe model SPX2598-ELT from Menards. While going through the stuff in the box I was surprised that they included the adapter to use an aftermarket hose. I verified using a caliper that the end that went into the washer was 15mm and the inside diameter on the other end was indeed 14mm. Kudos to them.
Josh…I lost the quick connect from hose to pressure washer( wife misplaced it..lol). What is the size and do they sell it as a stand alone?? Thx ..love your content
#5 the pressure washing nozzles you said you liked the 3.5 correct ? Check your links, no big deal because I found the 3.5 but your link for that was to the 3.0 but below you could scroll and I found ok. Thank you.
I've watched this video so many times. I still don't know what I need for quick connects for Ryobi washer. And are the fittings in the link real brass or coated crap metal that looks like brass?
The quick connects on my Portland water leak. Not a lot but I’m here posting. Also the Portland doesn’t stop the motor with the new accessories. It could be my machine, but I figure I would ask here
Quick connects is the best item I ever bought for my pressure washer, thanks Josh for introducing the Amazon set. I just purchased the UberFlex hose. What is your recommendation on storing the hose?
Josh you have any plans of making a video for polishing out scratches from glass. Mine recently got keyed by some jerk. I tried leveling it down with 1000 then 2000 grit paper along with M110 and M205. It got better but just decided to replace the glass today.
Please help me figure out it out I bought an adapter at Ace Hardware for my A.R. 1600 psi it’s not fitting either side tried both of them it’s like a little bit smaller I believe this is a three eights I have it was a blue one that you showed
I just purchased a Adams pressure washer 2.0 it says 1.8 gpm I don’t know if it really is. What orfis should I use in my form cannon it seems right on the boarder of a higher end pressure washer.
Which pressure washer are you using here? Could you suggest one good for both home and auto use?? Preferably $200 or less since I'll be doing aftermarket upgrades?
Josh last question for this week. You said to use the Technicians Choice as a wipe down for the interior. I see you spraying a cleaner heavily on the door panels and using a brush to wipe it in, then you rub it off with a Microfiber Towel. What is that product? I have everything I need except a good interior cleaner for the door panel and DashBoard. Thanks in advance
Thank you so much for all the helpful videos. Hey I have never used a foam cannon nor a pressure washer, but from the Homdex's instructions, it says to not add water to the concentrated solution as the washer would be the one to dilute it. So should I keep my newly bought Mr Pink concentrated or still add water per your instructions?
Walmart just released the Hart Spot cleaner and it's different from the 3-in-1 you reviewed before. I'm thinking about getting one and I'd like to see a review first
What about the active? What would you use in terms of degree tip? Also if I have a mtm foam cannon I’ve heard if I change the orfice to a 1.1 mm I can damage the pressure washer is this true? If so I would have to use the 1.25
Not a big fan of Uber flex hose need 2 waste more money that is unneeded I bought they Interchange brands 50ft hose way better just need 1 piece for the pressure washer adapter
If it’s got a thread I got a quick connect on it LOL Tryed out some tire hose guide rollers today on my truck. Not bad need to play with them a bit more. Do you use them?
here's a hose hack for cheap hoses. hook it up, let it fill. put it in the sun for 30 min straightened out...summer sun at noon. it will lose a significant amount of coil memory.
Thanks Josh... I needed this video 3 years ago when i first got started detailing. Kept buying the wrong fittings and as you know had terrible leaks. 💦 Have you seen the new Active 2.0? 🤯
I bought a pressure washer, quick connects, 50-foot hose, wand and a low-cost foam cannon based on your recommendations and couldn't be happier with my setup. Everything works flawlessly and I have you to thank for it Josh.
Same here
Me too, get info. Thank you sir!
Same here and it’s the best
Same. Best setup around
What kind of pressure washer do you have?
Josh, you have taught me so much about the details of detailing. I recently have added these upgrades to my setup and they've made car maintenance so much more enjoyable. The only thing I did differently is I got the MTM sgs28 gun and built nozzles with rubber guards. Thanks for sharing the wisdom.
Thanks for sharing parts list! 😃
THANKS JOSH REALLY HELPFUL
Very useful, thank you. I've been looking at upgrading my hose and gun and there's so many different connectors and adapters, it's hard to know which ones to get.
Happy to help!!
Danget I wanted to be first 🤣🤣
Talking about a swivel on the want...Dont the quick connects swivel if your using one..
This man is seriously pumping out quality and consistent content daily. Like how do you run a damn business and upload TH-cam videos daily. It's insane. It really is. This man puts in fucking work!
One item that I've found to be quite helpful that you overlooked: adding a water shut-off valve to the hose (between the hose end and the QD adapter). It avoids having to make the trip to the house water valve before disconnecting the hose, and further avoids all that water gushing and spurting out of the hose when it's first disconnected. An added benefit is that it retains water in the hose, so the next time it's used, you don't have to wait for the air in the hose to be evacuated. And it also saves a tiny amount of water with each connection/disconnection.
Agreed
@@SPPACATR Why do you think it would be bad? It wouldn't be any different than turning it off at the valve before disconnecting. You can even disconnect the M22 hose - turn the garden hose valve back on to flush it, turn it back off, and disconnect. I've been doing it for years with a Sun Joe SPX3000!
Josh!! This is hilarious! I just did this exact set up for my pressure washer. I used all the recommended upgrades you suggested, and it's awesome!! Can't beat the 50 foot hose upgrade, mind you I used the Flexzilla hose. Thanks for going into detail! Makes washing the car way easier! Cheers Bud!
Hi Josh,
New sub here, I'm setting up a hotel reel, wall mounted set up. I am using my existing K2 karcher, is it possible to buy karcher to quick connect hoses?
Im just trying to connect my foam cannon to a Electric Ryobi , new hose ? Connections ? Help
What kind of pressure washer is that?
“I love 50 feet long”
- Josh V may 2022
Josh, I ended up making a new pressure washer setup based on videos you've made. Just got the final piece today (the Craftsmen 1700psi tiny one that you've shown before). I ended up getting that, a MATCC stubby pressure washer gun, a Black Max (Uberflex) 35' pressure hose, a 50' Flexzilla garden hose, a Griot's Garage Boss Foam Cannon, and a bunch of quick connect adapters. Tried it tonight to make sure everything works and there are no leaks, and it's perfect! Such a huge improvement over my completely stock Sun Joe pressure washer and $20 foam cannon I was using. Stupid question for you: how do you wind up your pressure washer hose? I was wrapping it up using my elbow and the palm of my hand as the two points of contact but I'd like it to be wrapped more tightly than that. I see yours is, so I'm wondering if there's an easy way I'm not thinking of.
Your the man bro....About a month and a half ago I pretty much bought the hose, connections, stubby and the like all from your suggestions.
Absolutely love it and enjoy cleaning my vehicle....I always found it kind of ZEN when doing so.
The neighbors though are talking lolz....They think Im perhaps a little crazy haha 😛😛
too many people bought the gun with swivel - no mas on amazon :(
I've used this sprayer several times now on brick pavers, a wood deck, patio, and a driveway. th-cam.com/users/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX It has performed as expected on all surfaces. For larger areas like the decks and patios, I think I will be looking into a surface cleaner attachment to speed up the job, or at least make it a little easier. Hose and sprayer connections are tool-less, tight, and quick. I used the yellow nozzle on the concrete/brick surfaces, and the pressure was adequate for cleaning those surfaces.I am disappointed that these units are still being shipped with a nozzle storage holder that allows them to vibrate out of the holder way too easily and become lost, but I don't want to knock off a star for that reason. The functional part of the washer works very well, so I would recommend this product.
noob here....just to clarify, this kit will work, with the quick connects, on my 15mm stanley slp 2050 pressure washer? and, what mm is the hose attachment? thank you....
I changed my Sun Joe pressure to your list of upgrades. It’s been about a year now and still love it. Thanks !
Nice!! I have the original Active and it surges 🤦♂️
I’m wanting to get something different but without breaking the bank. I was my car every Sunday and use all the right stuff. What’s your favorite sub $300 pressure washer? I guess the one with the most GPM is best.
i got the same setup but insted of buying a 22-15 to 22-14 adapter, i got a 22-15 and a 22-14 quick connects and used the male 22-15 and female 22-14 from each of the quick connects just to save some space and don’t have a very long set of connections between pressure hose and pressure washer.
Hi great video. How would you know whether you need a 2.5 , 3.0 or a 3.5 orifice? I have a ryobi 1900 psi. Thanks
Why not just get a M22-15mm to 3/8 quick connect instead of running 2 adapters from the pressure washer to the hose?
Hey, need your help I ordered the uberflex hose and I have the simoniz 2100 platinum and the hose that’s attached to it if I remove it, it has a different connection to the unit itself. How do I make the uberflex connect to the actual unit itself.. without connecting an original hose to the uberflex hose.
Just bought a Simpson 3400 psi and all your recommended accessories. Just delivered today, so I need to connect all the quick disconnect fittings. Looking forward to using it to clean my boat and clean a few neighbors driveways. Find your videos very interesting and look forward to seeing them, thanks for making a boring subject fun to watch.
Just received & tested Ryobi 1600 / quick connects / hose / wand / mjjc foam cannon / 2.5/3.0 orfice. Getting ready to get started with my mobile detailing biz soon. Thanks for the great review! 🎉
Which quick connects did you buy?
@@joshuamiller4600 the one in his video. check the link in the description
@@84daddy Yeah I combined 2 of his videos and was thinking I needed an adapter lol thank you
Has anyone tried the supposedly stainless pressure washer connector kits out there like the "Mingle" kit? Hard to believe they're priced the same as the brass kits. I wonder if they're really stainless like the McKillans kit?
Dónde se compra la pieza M22-15,M22-14 y como se llama?
My water hose quick connects from that kit; leak at the quick connect points, not where they screw on but internal from where they connect.
Uberflex is a great upgrade, toss that other hose in the garbage!
This is great just ordered this setup. Instead of $100+ a wash now I can wash my semi truck myself
I hella like your videos man. Your product review videos are great. You really sparked a passion in auto detailing for me. Thanks brotha.
Please make a same tutorial video on Bosch Aquatak pressure washer series also. Request
I got a karcher k4, anyone knows if i can change the outputo water? Its different and i cant put the set up of the video
So I bought everything except the hose! I should have listened! I’m back to order from your link. I bought the 1900 psi ryobi.
I got the 1900 Ryobi just yesterday , but am taking it back to get the 1800 (and $50) today! Matt at the obsessive garage channel says they both have the same pump and motor...but add a few fancy doo dads and slightly reduce orifice size to get the 1900 PSI. Vid title; The Pressure Washing Project: E23 - Testing The New Ryobi Products
@@Robnord1 the 1800 is what I have. I wrote 1900 by mistake. It’s perfect for my needs.
@@julesv2914 I Love my little green machine too. Light, compact, and more than adequate for cars and small jobs.
My pressure wand leaks a lot of water when I connect it to my foam cannon what should I do to fix that
how do you store your hose? do you use a hose reel?
Josh,
Remember you can get quick connect that’s a 3/8” by 15mm so you don’t have to have the adapter!
you have a link?
Great tips josh I switched all to quick connect also did not like the hose holder so I bought a electrical cord reel and zip tied to the front it holds the 50 ft Uber flex hose perfect 👍
Been trying to think of a cheap way to hold the hose. Would hella like to see the links to your setup
@@MrMykeymusic it was a black cord reel on Amazon 12 bucks and I put it an the face of the pressure washer I just wrap the hose around I did not like the original as the hose kept dragging on the ground
Thanks brotha👍🏽
@@MrMykeymusic The Designers Edge 547702 Cord Reel, Black
Amazon's
Choice
EXCELLENT series, Josh. You helped me decide to purchase and set up my first pressure washer (Ryobi TSS electric) and the necessary upgrades (hose, quick connects for starters). Saved me a long and frustrating learning curve. Especially appreciate your relaxed approach for first-timers. Well-done!
Can this set up also work with the Bauer electric power washer
Thanks to you I have my first setup and now I wanna wash everything. Thanks!
I bought the pressure hose and the quick connect set. Won't the dissimilar metals bond together? Why in the world do hoses have aluminum fittings?
Can anyone answer this question?
If you use the quick connect fittings on your gun, do you even need one with a swivel adapter? Or does the quick connect fitting swivel already?
Once it pressurizes quick connects typically tighten up and don’t swivel very much
Thank you so much for this video
Great video as always! Thanks to your previous videos on these topics I upgraded my pressure washer hose and added all the quick connects to my setup which makes setting up a detail a breeze. Any chance we could get a review on one or a few steam vacuums?
Ive been watching your videos a lot, used your links to get my items. I am washing LARGE objects so it's wash a section, manual agitate, rinse. So I am switching from foam canon to nozzle pretty frequently. In this case, where are you putting your wash wand when you are scrubbing? I'm not goimg to put it on the ground and I am not using a cart that I could put it on.
Do you prefer or recommend Brass Quick Connect Fittings or the Stainless Steel ones?
Is there a difference between the two materials for longevity? (I.e seizing…..)
(AUSTRALIAN) when i bought all this, the m22-14 fitting leaks from the outlet even with Teflon tape, im thinking the aus version are an m22-15.
I have a stupid newbie question: if you're using a 3200psi/2.5gpm washer, is there a specific hose that you need to connect from a water spigot to the pressure washer? Or just basic garden hose? That detail seems a little unclear to me.
Thanks!
Hey Josh really hoping you can help me. I recently bought the “pressure washer set up” that you mentioned on your channel. One issue, the foam cannon is blasting out real “watery foam”. I changed the orifice as i am using a Karcher K3.170 electric pressure washer. Both 3M products i am using recommend 1oz 30ml of soap and then fill the rest of the bottle with water. Do i need to shake the bottle or stir the product once the bottle is full? Do I need to use more soap? Thanks you for your channel as you explain things really well and living at the end of the world (New Zealand) it’s really difficult to find these kinds of products in a retail store.
Thank you for the info! I’ve been dragging my feet on these upgrades for a year, and you just helped me pull the trigger😂🤫. Thanks for all of your content👍🏻🤘🏻
You’re not gonna regret the upgrades. 👌🏽
Just got a Greenworks 1800 psi 1.1 GPM power washer and the blue hose you suggest. Do I need the adapter? (Don’t have the box in front of me to look it up) And I bought the 2.5 orifice spray tips. So does the 40 degree tip bring it to the correct PSI? I think one of your other videos suggested this. Thanks!
Why does my total stop system stop working after I change out the stock hose and wand that the pressure washer came with for my new Uber flex hose and McKillans wand (I have Sun Joe SPX2688-Max electric)
I brought a STIHL RE 110 ELECTRIC WATER PRESSURE 2 Years ago Iv got an quick adapter for it : o, 25, 45, 60 and a soap one . Any suggestions adding a hoes replacement for stihl
I'm looking to build a washing station in my garage, what electric unit would you recommend under $300? I plan on getting your recommended upgrades with hose, reel, quick connects, foam cannons and wand.
I have a Ryobi 2000psi 1.2gpm Electric Pressure washer. So should I use the 2.5 orifice size nozzle?
Thanks Josh. I set up my pressure washers similarly with QD's, but at the high pressure unit output use a female QD fitting. That way it's just like electrical extension cords...male plugs in, then if desired, multiple hoses can be linked together for reaching way out for some project requiring that.
Super bummed Greenworks doesnt know their hose connection size (M22x14 or M22x15), Guess ill have to guess.
Sorry if you haven't addressed this in previous videos, but I have to ask. In this video, Retractable Garden Hose Reel! | How to store your garden hose | GiraffeTools Review, at the 2.15 mark, there is a hose real that has a grey hose hooked up to your pressure washer. Do you have a video on this or can you explain the set up. I'm only going to using my PW for auto details close to the garage and that would be perfect. Also, today (May 30) I picked up the SunJoe model SPX2598-ELT from Menards. While going through the stuff in the box I was surprised that they included the adapter to use an aftermarket hose. I verified using a caliper that the end that went into the washer was 15mm and the inside diameter on the other end was indeed 14mm. Kudos to them.
Josh…I lost the quick connect from hose to pressure washer( wife misplaced it..lol). What is the size and do they sell it as a stand alone?? Thx ..love your content
#5 the pressure washing nozzles you said you liked the 3.5 correct ?
Check your links, no big deal because I found the 3.5 but your link for that was to the 3.0 but below you could scroll and I found ok. Thank you.
I've watched this video so many times. I still don't know what I need for quick connects for Ryobi washer. And are the fittings in the link real brass or coated crap metal that looks like brass?
The quick connects on my Portland water leak. Not a lot but I’m here posting.
Also the Portland doesn’t stop the motor with the new accessories. It could be my machine, but I figure I would ask here
Harbor Freight has a 25% off on the Portland pressure washer. Getting mine today for $62.57!
Quick connects is the best item I ever bought for my pressure washer, thanks Josh for introducing the Amazon set. I just purchased the UberFlex hose. What is your recommendation on storing the hose?
I have a 2030 psi sunjoe, bought a 50 ft. Hose, doesn't work lol. Any ideas? I reconnect the old one and it works fine.
Josh you have any plans of making a video for polishing out scratches from glass. Mine recently got keyed by some jerk. I tried leveling it down with 1000 then 2000 grit paper along with M110 and M205. It got better but just decided to replace the glass today.
As usual great video!!!! Quick question, I have an older Black and Decker pressure washer, hat connection does it have M22x14 or M22x15??
Question- I got the greenworks 2700 and it says it comes with the 3.0mm orifice. In your opinion do I still need the 3.5mm?
Please help me figure out it out I bought an adapter at Ace Hardware for my A.R. 1600 psi it’s not fitting either side tried both of them it’s like a little bit smaller I believe this is a three eights I have it was a blue one that you showed
I just purchased a Adams pressure washer 2.0 it says 1.8 gpm I don’t know if it really is. What orfis should I use in my form cannon it seems right on the boarder of a higher end pressure washer.
Hello josh question, do all quick connects, pressure wand, and Uber flex hose. Do they all work on any ryobi pressure washer products?
Which pressure washer are you using here? Could you suggest one good for both home and auto use?? Preferably $200 or less since I'll be doing aftermarket upgrades?
I been watching you show. I just received gear based on your recommendations and the information you present.
Josh last question for this week. You said to use the Technicians Choice as a wipe down for the interior. I see you spraying a cleaner heavily on the door panels and using a brush to wipe it in, then you rub it off with a Microfiber Towel. What is that product? I have everything I need except a good interior cleaner for the door panel and DashBoard. Thanks in advance
Thank you so much for all the helpful videos. Hey I have never used a foam cannon nor a pressure washer, but from the Homdex's instructions, it says to not add water to the concentrated solution as the washer would be the one to dilute it. So should I keep my newly bought Mr Pink concentrated or still add water per your instructions?
Quit working so much. Take a few days for cripes sake, it's Memorial Day weekend. We'll live.
Does this quick connect set fit the karcher K2100ps? And would I need the adapter?
Walmart just released the Hart Spot cleaner and it's different from the 3-in-1 you reviewed before. I'm thinking about getting one and I'd like to see a review first
What about the active? What would you use in terms of degree tip? Also if I have a mtm foam cannon I’ve heard if I change the orfice to a 1.1 mm I can damage the pressure washer is this true? If so I would have to use the 1.25
Thank you very much Josh from Sydney , great video, I definitely will get all these pressure washer hose and quick connection adapter.
Not a big fan of Uber flex hose need 2 waste more money that is unneeded I bought they Interchange brands 50ft hose way better just need 1 piece for the pressure washer adapter
Josh do you have a link to where I can purchase the amp reader unit you have plugged into the wall to check the draw ? Love your channel
If it’s got a thread I got a quick connect on it LOL Tryed out some tire hose guide rollers today on my truck. Not bad need to play with them a bit more. Do you use them?
What pressure washer hose are you using 1/4 or 5/16? I’m new to all these so my apologies if is a silly question
I bought a worx 1800 psi washer and wow very impressed so small, puts out like a real trooper, size of a lady’s purse
here's a hose hack for cheap hoses. hook it up, let it fill. put it in the sun for 30 min straightened out...summer sun at noon. it will lose a significant amount of coil memory.
So HOW does one quick connect 2 hoses together that already have quick connects on both of them???
I'm planning on getting that little 100 dollar craftsman washer and a stubby wand and a foam cannon here in the next week or two.
Thanks Josh... I needed this video 3 years ago when i first got started detailing. Kept buying the wrong fittings and as you know had terrible leaks. 💦
Have you seen the new Active 2.0? 🤯
What was the cheap Foam Cannon listed on Amazon? The page is not found.
I was looking in the description but I didn’t find the quick connect kit you mention. Where can I get that kit ?
I had an issue with my mckillans wand I purchased. Sent them an email and never heard back from them !
Thank you for sharing those tips on pressure washers and hoses. MUCH appreciated!!
Josh do you like the Mckillians pressure washer extension wand to use on your McKillians hand piece ?
Hey can you use a 3100psi hose and nozzle on a 3300psi craftsmen pressure washer
Is this a good pressure washer? It looks like it's from harbor freight....
What about a hyper tough I think I have to have a adapter the quick connect wont screw onto the presure washer hose hook up