Yep. Always do a quick spray to the side after swapping tips. I didn’t when I swapped from my foam cannon to tip, it wasn’t on right, so it flew up like a little mortar shell. Landed right on my windshield. I didn’t notice the crack until later.
I opted for the Gray KobraJet hose because of supply chain issues during covid and used it twice. Since then OG introduced the newer inhouse hose that I plan on upgrading at some point in the future along with the Active 2.0. The Mosmatic OG gun is freaking epic!
Hello Jeremy from Australia 🙃 I went for the UBERFLEX™ Kink Resistant Pressure Washer Hose 1/4" x 50' 3,100 PSI with (2) 22MM by Pro Pulse ( still made in USA) and I have the quick connect for the water and the stubby gun, just have to wait till the 19/09/23 for it to arrive😉 I notice that the OG hose is made by Gates and I know they make lots of top quality rubber products..
You now have another new subscriber! I was searching TH-cam for videos on pressure washers because I’d like to have one for some car cleaning and other around the house stuff like cleaning the driveway and sidewalk to name a few. After watching this video, I need that foam wash in my life! I went and watched a few other videos on your channel and then I just had to subscribe. The content and how you present it is great. I returned to this video and clicked on a few of the links you provided in the description to get a general price list going for myself. When I’m ready to purchase, I will do so from your links to help you out in a small way. I will be watching more of your past videos over the next few days to catch up. OH! And thanks to one of you other videos, I will also be insulation my garage door! The summers here’s in Arizona can turn a garage into a three digit sweat box by 10am! It never crossed my mind to insulate the inside of the garage panels. Thank you!
Thank you. I appreciate it. I like the foam cannon too. The garage insulation was a big help here. The sun beats on the door half the day. Was so hot I could not even touch it. Now its nice and cool and the ac can keep up easily. Thanks for watching
Great advice and all of those OG products are built to last a long time. The thicker hoses also bring up added pressure when using the foam cannon. Thank you for a fun video!
Good stuff. I bought the quick disconnect kit and love it for the pressure hose and the supply hose too. Makes setup and break down a ton easier. I do have the feather weight hose. Has worked good so far. Hoping it stays that way.
I have all the upgrades in the video, but I'd have to say quick disconnects is by far my favorite. If you can't afford all the upgrades at once I'd go quick disconnects, then short gun, then hose, and foam cannon last. How do you feel Jeremy?
Jeremy great to see another video. I did get the OG hose and the OG quick disconnects. I love the mosmatic short gun too. I don't have the MJJC though and might just have to get myself a Christmas present this year.
Enjoyed the video.. I'm all set up although I like to keep looking for anything new.. I have been thinking about you hoping all is ok with the news of the fire.. Stay Safe!
Great info! Love your channel, your videos are top notch. Question: how do you remove that “white wax residue” on your black trim? I know I should have not got it on there to begin with 😢. I can cover for awhile with some dressing, but it comes back. Any tips would be greatly appreciated.
Great video. I've got the quick connects and short handle trigger which is awesome. I'd love to have on of the longer, higher quality hoses but can't seem to find one that will connect to my Karcher (I'm just a weekend enthusiast).
How do you figure out which hose goes to which disconnect fittings. The fittings look the same to me but I don’t think I could remember which way to connect the hoses. I’m sure it would burn up the compressor if you do connect the hoses backwards.
Great info Jeremy! Off the subject have you ever tried the suds factory water spot remover for glass and paint? Wondering if it really works that easily.
Great content! I’ve got a sun joe pressure washer and have quick connects for my Uber flex hose and MTM hub. What is the best QC to use for my garden hose to attach to my sun Joe pressure washer. Does it need a specific adapter being m22-15.
Same here. I think qd’s save a lot of time. Have never had any issues regardless if they were brass or ss. People shouldn’t get too caught up on “high quality” fittings and what not. Just a waste of money as they all work and do the same thing. Same goes for pw tips. I mean if you’re worried about banging the tip on a vehicles paint then you probably shouldn’t be trusted to work on cars in the first place.
@@HawaiiDetailing ok. Doesn’t mean it doesn’t happen. A lot of people complain that the piece where you attach the hose to the pressure washer completely breaks off and is unrepairable. It’s a well known defect of the pressure washer. There are 2 types of reviewers, the ones with objective reviews that protect the consumers and the ones that sell out for sponsorships
@aaron6822 what are you trying to say? I have not heard of it? If it happens say it. I don’t care?? I have not taken any money from any of these PW companies. With that being said who do you feel is the bias vs unbiased opinions?
All new equipment...only used once to test it.. I have an ar max 3000 pressure washer (3000PSI)with the newer mjjc foam cannon set up. Why do you think its leaking from the very bottom of the mjjc gun and where its connected to the powerwasher using a uberflex powerhose. I believe the mjjc lance came with O rings & Teflon tape....I never utilized them....could that be the reason why water is leaking from both areas? The Uberflex powerhose does not have any quick connects attached, just twisted and turn as best as i can to the powerwasher. Lastly, from your video you pretty much have a quick connect for everything that requires an connection.....does that help prevent the leaks over screwing things in to connect. I do no have a quick connect for my garden hose. Will the 3000PSI ruin my car? The mjjc lance came with a adapter that changes it to a few different spray patterns.
Can you do a review on a Worx 1800 psi portable pressure washer as I bought one and absolutely love it ! Have all your upgrades on her and wow this thing puts out ! Wash my RAM TRX pick up and Lexus LC 500 coupe and wow !! I think you might give it a baaaaaam at the end 😂 ? Have 1.2 mm orifice installed as well
How do you know when or when not to use the white vinyl thread tape? Is it whenever a o-ring/gasket is involved then you do not need the thread tape on the connections or should I just always use it when attaching the quick disconnects?
Great video! I've done all of the upgrades to the OG spec stuff and love all of them. They've made my sunjoe press washer more enjoyable to use on every wash. My only issue i'm having is on the Kobrajet hose i purchased from OG back in 2017 I believe , it is not as pliable or easy to coil up after a wash. It fights me trying to coil it up , I turn it one way, and it wants to go the other way. It is a work out. Thinking of replacing it with one of the V1 kobrajet high pressure hoses 50 footer. OG support tells me the one i have is more stiffer than the one they sell now. Is the high pressure OG hose you have still easy to coil up even with water in it after a carwash? What are your thoughts?
Mine is on a reel so its always easy. I have not noticed it stiffening at all though. It feels the same as when I put it up there. Shut the PW off and bleed the pressure from hose with the trigger before you try to fight it.This model OG hose is definitely a bit more flexible bit.ly/2UmpQRf I have a 50' version and its nice. All these commercial grade hoses are naturally stiffer then cheaper models but it shouldn't be crazy stiff. I am not familiar with the new kobrajet hose. I will have to take a look at it. Here are the hoses that I recommend depending on budget and use. www.hawaiidetailing.com/portable-pressurewasher Hope that helps
@@enzobids Both are great quality and user experience. The Kobrajet has a texture on the surface and can get dirty easier. The OG is slick surface and wipes clean easy. It comes down to what color you want also.
I'm not sure if you can help me ? But my pressure wash alrady has quick connect on the front, and I am trying to find a longer hose off Amazon. I just took a few photos if you need ?
Not sure what you have or need. Check here to see if any of this would connect. They are common size connectors. www.hawaiidetailing.com/portable-pressurewasher
Great videos! Purchased the Uberflex and Coxreel. Noticed I can’t hook it up without buying an adapter for the inside of the the Coxreel. Is that correct? Should be 3/8 NTP to 22mm 14 male adapter. Are you able to confirm?
I have a Michelin pressure and I’m looking online to find information regarding quick connects for it with no luck do you have any idea where I can find any information on what to buy ?
How do you like the Active 2.0 pressure washer? I just bought a Ryobi 1800 the other day. Wondering if I should return it and get the Active 2.0 instead. Is the Active 2.0 worth the 2-3 times price?
Here is my thoughts. I would start with a entry level PW like the one you mentioned and kit it out with these type of upgrades to get you a great user experience on a budget that suits you. If you have the extra money I always would go with the better tools ex. the Active 2.0. This will provide a good mid level pump and with these added accessories you will have a great kit. If you are serious about your tools and want the best I would go with the Kranzle and not look back. Hope that helps.
what did obsessed garage recommend for the orifice size for nozzle tip to get the most amount of gpm? or do you know the title of the video from obsessed garage? TIA
Learning the over under method of coiling a hose/cable changed my life 😂 Years of struggling. No more.
Yeah. You have to roll it up nice to get it to unroll nice. Thanks for watching
Yes, game changer
I like it too. I learned it from watching "This Old House."
Great video as usual Jeremy with the much-appreciated humor thrown in.
Glad you enjoyed it
Yep. Always do a quick spray to the side after swapping tips. I didn’t when I swapped from my foam cannon to tip, it wasn’t on right, so it flew up like a little mortar shell. Landed right on my windshield. I didn’t notice the crack until later.
Bummer.
I opted for the Gray KobraJet hose because of supply chain issues during covid and used it twice. Since then OG introduced the newer inhouse hose that I plan on upgrading at some point in the future along with the Active 2.0. The Mosmatic OG gun is freaking epic!
The kobrajet is a great hose. The short gun is the best out there. Thanks for watching the channel.
Looking fit Jeremy! Great vid as always too!
Thanks a lot. I appreciate it. Been trying to take care of myself.
I watch all your videos and found your channel 2 years ago. I hit like on every video. Love your personality and your content!!
Thanks a lot. I really appreciate it.
Perfect timing. I was just browsing for the QD for hoses and debating on these. Now I’m confident what to buy
They are worth it for sure.
Much appreciated video - I’m just setting up my new system - this really helps!
Just watched this full video......AND......I see no arguments,,,😂😂😂 great content again Jeremey!!
Glad you enjoyed it. Thanks.
Hello Jeremy from Australia 🙃
I went for the UBERFLEX™ Kink Resistant Pressure Washer Hose 1/4" x 50' 3,100 PSI with (2) 22MM by Pro Pulse ( still made in USA) and I have the quick connect for the water and the stubby gun, just have to wait till the 19/09/23 for it to arrive😉
I notice that the OG hose is made by Gates and I know they make lots of top quality rubber products..
Hello. You will be happy to get a good hose on there. The OG hose is nice. The Uber will do you well though. Thanks for watching
You now have another new subscriber! I was searching TH-cam for videos on pressure washers because I’d like to have one for some car cleaning and other around the house stuff like cleaning the driveway and sidewalk to name a few. After watching this video, I need that foam wash in my life! I went and watched a few other videos on your channel and then I just had to subscribe. The content and how you present it is great. I returned to this video and clicked on a few of the links you provided in the description to get a general price list going for myself. When I’m ready to purchase, I will do so from your links to help you out in a small way. I will be watching more of your past videos over the next few days to catch up. OH! And thanks to one of you other videos, I will also be insulation my garage door! The summers here’s in Arizona can turn a garage into a three digit sweat box by 10am! It never crossed my mind to insulate the inside of the garage panels. Thank you!
Thank you. I appreciate it. I like the foam cannon too. The garage insulation was a big help here. The sun beats on the door half the day. Was so hot I could not even touch it. Now its nice and cool and the ac can keep up easily. Thanks for watching
Never gets old Jeremy!! Great stuff!! Aloha 🏝
Thanks. I appreciate it
Appreciated that you point out which quick connects for what purpose and such as i always wonder which to get, haha
Thanks for watching
dude your looking amazing! good on you for taking your health as seriously as you do
Thank you. I appreciate it
Thank you for the update Jeremy! I've used the Meguiar's and Wet Coat in my shop. Both are great.
Yeah I agree. I like them both also. Thanks for watching
Great advice and all of those OG products are built to last a long time. The thicker hoses also bring up added pressure when using the foam cannon. Thank you for a fun video!
Thanks for watching and sharing
Using a thicker hose doesn’t give you more added pressure. You get more pressure going with a thinner hose like a 1/4” instead of a 3/8”
Good stuff. I bought the quick disconnect kit and love it for the pressure hose and the supply hose too. Makes setup and break down a ton easier. I do have the feather weight hose. Has worked good so far. Hoping it stays that way.
Thanks. you should get some good life out of it. Thanks for watching
Hi, I am following from Mexico, i like the content of channel.
Awesome, thank you!
Keep the great videos coming buddy!
Thanks! Will do!
I have all the upgrades in the video, but I'd have to say quick disconnects is by far my favorite. If you can't afford all the upgrades at once I'd go quick disconnects, then short gun, then hose, and foam cannon last. How do you feel Jeremy?
I agree. That’s a good order to work your way up. Thanks for sharing.
Jeremy great to see another video. I did get the OG hose and the OG quick disconnects. I love the mosmatic short gun too. I don't have the MJJC though and might just have to get myself a Christmas present this year.
Thanks. I like them too. Yeah give the MJJC a try some day. It’s a good one.
Jeremy with the fresh cut! ✂️
Hahaha. I cut it down.
Thanks for a useful detailed video 😊
Glad it was helpful!
Mina-san, kite daikemasu. Ralph Buncho desu!!
Great video
Can those hoses and quick connects suit a high pressure system of say 4,000 psi and 4 gpm?
Enjoyed the video.. I'm all set up although I like to keep looking for anything new.. I have been thinking about you hoping all is ok with the news of the fire.. Stay Safe!
Thanks for asking. I appreciate it. I am all good here.
Great content! Where did you get the two lightning bolt ⚡️ neon signs? I see no wires attached and it looks really cool
Awesome. Thank you.
You're welcome!
You got any tips for Pressure Washer Noise Reduction! 😅 All in All, Awesome Video Man! I am gonna add these upgrades as soon as possible!
Get a longer pressure washer hose
I need to get some quick disconnects for my setup
They are a great add on.
Great info! Love your channel, your videos are top notch.
Question: how do you remove that “white wax residue” on your black trim? I know I should have not got it on there to begin with 😢. I can cover for awhile with some dressing, but it comes back. Any tips would be greatly appreciated.
Hose reel is my next upgrade for sure. I got a new flexzilla style hose and it's great but it's also a pain to put away.
The hose reel is a great upgrade. It makes using it way better. Thanks for watching
Great video brother. What’s your favorite brand iron remover? 👍🏻🇺🇸🇺🇸
Great video. Thank you. Subbed.
Great video. I've got the quick connects and short handle trigger which is awesome. I'd love to have on of the longer, higher quality hoses but can't seem to find one that will connect to my Karcher (I'm just a weekend enthusiast).
The setup that I showed will connect to a Karcher for sure. My old Karcher had the same M22-14 as I showed in the video. Thanks for watching
thank u, what would your BEST PRESSURE WASHER recommendation for home use on car, grill and carpet cleaning
www.hawaiidetailing.com/portable-pressurewasher
Check this out. It’s all my thoughts. Thanks
How do you figure out which hose goes to which disconnect fittings. The fittings look the same to me but I don’t think I could remember which way to connect the hoses. I’m sure it would burn up the compressor if you do connect the hoses backwards.
Check this out. This shows exactly the way these are set up. www.hawaiidetailing.com/portable-pressurewasher
Jeremy glad to see you pal. Hope all is well.then again you already did.
Thanks for watching
Great info Jeremy! Off the subject have you ever tried the suds factory water spot remover for glass and paint? Wondering if it really works that easily.
I have not tried it. Will have to look at it in the future
Great content! I’ve got a sun joe pressure washer and have quick connects for my Uber flex hose and MTM hub. What is the best QC to use for my garden hose to attach to my sun Joe pressure washer. Does it need a specific adapter being m22-15.
Thanks. Here is all my parts and pieces for my personal kits. www.hawaiidetailing.com/portable-pressurewasher
What orifice size do you recommend for the foam cannon and also the nozzles for active 2.0? Thanks in advance!
Same here. I think qd’s save a lot of time. Have never had any issues regardless if they were brass or ss. People shouldn’t get too caught up on “high quality” fittings and what not. Just a waste of money as they all work and do the same thing. Same goes for pw tips. I mean if you’re worried about banging the tip on a vehicles paint then you probably shouldn’t be trusted to work on cars in the first place.
Thanks for sharing your thoughts. I do like the rubber tip a lot but its not a no go item.
Love your humor 😅
Tesla, question: roughly how many ounces of soap do you pour into your foam cannon if it's a 32oz container? and fill the rest up with water.
Look here under Foam Cannon Soap Mixes. I talk all about it. LMK if you have any questions www.hawaiidetailing.com/dillution
Please do a video on cordless DA polishers & how to use them !
Will do in the future. Thanks.
@@HawaiiDetailing Thank You Sir, glad to see your channel Take Off, I’ve been with you 2 years
@@bobclapper2672 thanks. I appreciate it.
Does the metal on the pressure washer still break off after a couple months?
Not sure what you mean?
@@HawaiiDetailing ok. Doesn’t mean it doesn’t happen. A lot of people complain that the piece where you attach the hose to the pressure washer completely breaks off and is unrepairable. It’s a well known defect of the pressure washer. There are 2 types of reviewers, the ones with objective reviews that protect the consumers and the ones that sell out for sponsorships
@aaron6822 what are you trying to say? I have not heard of it? If it happens say it. I don’t care?? I have not taken any money from any of these PW companies. With that being said who do you feel is the bias vs unbiased opinions?
All new equipment...only used once to test it..
I have an ar max 3000 pressure washer (3000PSI)with the newer mjjc foam cannon set up.
Why do you think its leaking from the very bottom of the mjjc gun and where its connected to the powerwasher using a uberflex powerhose.
I believe the mjjc lance came with O rings & Teflon tape....I never utilized them....could that be the reason why water is leaking from both areas?
The Uberflex powerhose does not have any quick connects attached, just twisted and turn as best as i can to the powerwasher.
Lastly, from your video you pretty much have a quick connect for everything that requires an connection.....does that help prevent the leaks over screwing things in to connect.
I do no have a quick connect for my garden hose.
Will the 3000PSI ruin my car? The mjjc lance came with a adapter that changes it to a few different spray patterns.
Send me a pic to Jeremy@hawaiidetailing.com
Was your area affected by fire?
yup
No. I am on another island. Thanks for asking
Can you do a review on a Worx 1800 psi portable pressure washer as I bought one and absolutely love it ! Have all your upgrades on her and wow this thing puts out ! Wash my RAM TRX pick up and Lexus LC 500 coupe and wow !! I think you might give it a baaaaaam at the end 😂 ? Have 1.2 mm orifice installed as well
Great to hear. Glad you have a good kit put together. Thanks
Give the new OG Foam Cannon Mount a look, its a beauty!
Yeah. I have it on there. Unreal craftsmanship
I mean't the new foam cannon wall mount
You can easily put together your own for less than half the price.
How do you know when or when not to use the white vinyl thread tape? Is it whenever a o-ring/gasket is involved then you do not need the thread tape on the connections or should I just always use it when attaching the quick disconnects?
For a National pipe thread connections use the tape.
Great video! I've done all of the upgrades to the OG spec stuff and love all of them. They've made my sunjoe press washer more enjoyable to use on every wash. My only issue i'm having is on the Kobrajet hose i purchased from OG back in 2017 I believe , it is not as pliable or easy to coil up after a wash. It fights me trying to coil it up , I turn it one way, and it wants to go the other way. It is a work out. Thinking of replacing it with one of the V1 kobrajet high pressure hoses 50 footer. OG support tells me the one i have is more stiffer than the one they sell now. Is the high pressure OG hose you have still easy to coil up even with water in it after a carwash?
What are your thoughts?
Mine is on a reel so its always easy. I have not noticed it stiffening at all though. It feels the same as when I put it up there. Shut the PW off and bleed the pressure from hose with the trigger before you try to fight it.This model OG hose is definitely a bit more flexible bit.ly/2UmpQRf I have a 50' version and its nice. All these commercial grade hoses are naturally stiffer then cheaper models but it shouldn't be crazy stiff. I am not familiar with the new kobrajet hose. I will have to take a look at it. Here are the hoses that I recommend depending on budget and use. www.hawaiidetailing.com/portable-pressurewasher Hope that helps
Would you recommend the OG in house hose or the Kobrajet?
@@enzobids Both are great quality and user experience. The Kobrajet has a texture on the surface and can get dirty easier. The OG is slick surface and wipes clean easy. It comes down to what color you want also.
Work with 50’ 5/8 hose?
Do all the versions of the OG hoses come with the quick connects? I noticed there are 3 different hose versions
The ones I have linked do. I am not sure about his whole inventory. Sorry. Hope that helps.
I'm not sure if you can help me ? But my pressure wash alrady has quick connect on the front, and I am trying to find a longer hose off Amazon. I just took a few photos if you need ?
Not sure what you have or need. Check here to see if any of this would connect. They are common size connectors. www.hawaiidetailing.com/portable-pressurewasher
Great videos! Purchased the Uberflex and Coxreel. Noticed I can’t hook it up without buying an adapter for the inside of the the Coxreel. Is that correct? Should be 3/8 NTP to 22mm 14 male adapter. Are you able to confirm?
Yes the uberflex is not designed to connect directly to the reel. You will need to adapt to 3/8.
What's a decent quality hose reel you'd suggest?
here are my favorites www.hawaiidetailing.com/wallmountedpressurewasher
Thank you sir
@@HawaiiDetailing
I have a Michelin pressure and I’m looking online to find information regarding quick connects for it with no luck do you have any idea where I can find any information on what to buy ?
I am not familiar with that brand. Most of these items will fit most commonly available PW’s. www.hawaiidetailing.com/portable-pressurewasher
Have you tired the active short gun yet ?
No I have not. I just dont like the way it even looks so I kinda stopped there. Thanks for watching
How do you like the Active 2.0 pressure washer? I just bought a Ryobi 1800 the other day. Wondering if I should return it and get the Active 2.0 instead. Is the Active 2.0 worth the 2-3 times price?
Here is my thoughts. I would start with a entry level PW like the one you mentioned and kit it out with these type of upgrades to get you a great user experience on a budget that suits you. If you have the extra money I always would go with the better tools ex. the Active 2.0. This will provide a good mid level pump and with these added accessories you will have a great kit. If you are serious about your tools and want the best I would go with the Kranzle and not look back. Hope that helps.
@@HawaiiDetailing thanks for replying. I’m very tempted to return the Ryobi and get the Active.
It never ends man, hahaha, I agree.
It never ends. Thanks for watching
Did u have issues with your Active 2.0 pressure switch? It doesn't like rubber hoses allegedly.
No. It’s fine. Every ounce and a while you have to actuate the trigger but overall it’s great. Nothing like the kranny though. Thanks for watching
I'll buy a used ryobi for $300 before i buy a active 2.0 for $6.79 from OG. That guy is an absolute tool
I’m sure he doesn’t care about a cuck not buying from him
No doubt get a Coxreels.
Yeah they are solid.
I always recommend watching the obsessed garage video about the pressure washer and noting which orifice size he recommends for the most gpm
Thanks for sharing that info.
what did obsessed garage recommend for the orifice size for nozzle tip to get the most amount of gpm? or do you know the title of the video from obsessed garage? TIA
#MauiStrong
Here's some trivia:
Q: How was the pressure washer and foam cannon invented?
A: Chuck Norris was looking for a better shave routine.
Hahaha.
Super helpful video. I appreciate the tip for coiling my hoes. Thank you
Thanks for following the channel.
Ahh?…Second but…Does anyone want to start off with the obvious?😅 I’ll look for additional comments.
Thanks for being on top of it.
First
There we go. Thanks man.