Awesome! I'm currently in the process of restoring 2 sets of the same exact wheels. I was going to just reuse my old hardware because I haven't been able to find good replacements. Any chance you could share a link to your hardware source? I tried looking up what you said but couldn't find it...
Awesome bro... I am building me a set 17x12 all around.... do you need longer hardware to bolt them together? If so can you give me the dimensions of the hardware you are running
Isn't it going to rust? or whatever the term is when aluminum oxidizes? Don't you need a clear coat or no? Or is that what mother's is for, iguess that is the layer of protection??
Last Sunday I saw a dark blue e30 down here in Clear Lake and pointed it out to the wife and girls. It was beautiful and they want me to build one. hang in there, I'm sure yours will be beautiful.
Did I understand that you ended up buying custom outer barrels for the rears? Even though you originally planned to build them each from 2 style 5 inner barrels? I have very similar plans for my e28, only I'm on more of a budget and they're getting powder coated solid black.
Where is the hardware from? Ive been searching for about a year for m6 hardware for my ssr ex-c wheels. Sadly i traded my bbs rz's for them under them being weds Bavaria's
Hey brother, I'm not sure if you know this already, but with the extension added, the torque value will change, which will either increase or decrease. www.engineersedge.com/manufacturing_spec/calculator/torque_adapter_extension.htm check that link out to verify if your torque values are correct. Better safe than sorry.
Hey man Great channel! Im planning on doing this same wheel set up on my Rocket Bunny M3. I'd love to pick your brain on few idea's. Check my channel out if you get some spare time. Im in the Houston area as well. Keep it up!
Well done Sir ! I love to see people come up with new ideas and bring them to life .
They look great man!
Awesome! I'm currently in the process of restoring 2 sets of the same exact wheels. I was going to just reuse my old hardware because I haven't been able to find good replacements. Any chance you could share a link to your hardware source? I tried looking up what you said but couldn't find it...
Awesome bro... I am building me a set 17x12 all around.... do you need longer hardware to bolt them together? If so can you give me the dimensions of the hardware you are running
Zane Romero you have to have 5 - 4mm machined off the backside of the face where the bolts go, then you can use typical hardware
You didn't add a clear coat?
Question where exactly did you shave the 4mm and why ?
Isn't it going to rust? or whatever the term is when aluminum oxidizes? Don't you need a clear coat or no? Or is that what mother's is for, iguess that is the layer of protection??
Didn't see you put red lock tite on the treads
Where did you get the face machined? If you dont mind me asking? Any cnc machining shop?
I love DIY
How did you come up with the amount needed to be machined off?
have you figured this out? our friend here doesn't seem to answer comments much
Last Sunday I saw a dark blue e30 down here in Clear Lake and pointed it out to the wife and girls. It was beautiful and they want me to build one. hang in there, I'm sure yours will be beautiful.
Craig Thomas Do it. Then come up to Dallas for some meets.
Has it got to be metal on metal in the middle?.. Will it not corrode quick??
where did you get those center caps? for the 090 rcs
Hello!What with did bbs rc have in their original state? And how wide did the rear and come out?...Thanks!
What size BBS emblems did you go with? To replace the BMW logo
Did I understand that you ended up buying custom outer barrels for the rears? Even though you originally planned to build them each from 2 style 5 inner barrels? I have very similar plans for my e28, only I'm on more of a budget and they're getting powder coated solid black.
4" Front lips Purchased. The rears are my handmade barrels/lips. That's 99% of the point my dood.
Did you put some silicon btw the pieces?
where does the valve stem go on the rears?
Would it have been good to use blue loctite?
I did.
Are your center pieces 15"? If so, where did you acquire the center caps from?
Sam Gristina the centers are from the 17x8 Style 5 with the 15” BBS center cap
Where did you order the 2 front 4" lips from ?
Zane Romero ewheelworks on IG
hey can you send me a link to where I can get the 3inch lip for my style 5
ur posts are really helpful thanks for ur videos
can you please send me the link to where you get your 4inch lip for the style 5
Where is the hardware from? Ive been searching for about a year for m6 hardware for my ssr ex-c wheels. Sadly i traded my bbs rz's for them under them being weds Bavaria's
0:52
EuroGarage i appreciate the reply but its hard to understand, and could be spelt differently than what i heard.
Ehrlich wheelworks
@@brandonb2985 sadly i have been in contact with them. And they referred me to fastenal, since they cant get what i need.
@@voltairee3012 i know this is old but if you still haven't found M6 hardware go to VRWheels, they have it on there
4mm off the back? So .157? Is it just me or does it look bigger then that?
can you give me the front and the rear wheels spaces???
Omar Arnous 17x12 .25 et-31 17x10.25 et-4
EuroGarage thanks😚😚
EuroGarage -31 offset good Googly moogly
one question what you et 31 and et4
i can't just assemble and tight the nuts, 3 pieces wheels needs kinda be alignment, in order to make sure the 3 pieces are 100% centralized.
Shouldn’t you put something to seal jn between the piece’s? otherwise all your air will leak out
I should watch the whole video before commenting😅 looks insane man!
PVMTERROR some people do. It’s not ideal to have anything on the mating surface though so the norm is seal after assembly.
I did the same with my wheels at my 328i e30 and u have to seal it before u assemble them. Otherwise u will not get it airtight.
This simply is not true.
Or any chance of you having the blueprint (if you made one) that you can send me. Dm if possible please
How are you going to fit these on an E30? Aren’t they too wide?
Hey brother, I'm not sure if you know this already, but with the extension added, the torque value will change, which will either increase or decrease. www.engineersedge.com/manufacturing_spec/calculator/torque_adapter_extension.htm check that link out to verify if your torque values are correct. Better safe than sorry.
😲😲😲😲😲👍👍👍👍👍👍
Hey lincon center capstone right over and they at polished aluminum I have them on mine on my black e30 @ allene30 they are like 20$ on eBay
Allene30 Edirtyy I saw those. But they are too big imo.
They are going to be a BITCH to clean!
Use dust free pads!
Hey man Great channel! Im planning on doing this same wheel set up on my Rocket Bunny M3. I'd love to pick your brain on few idea's. Check my channel out if you get some spare time. Im in the Houston area as well. Keep it up!
Bimmer Dude just email me man