@@charlestannehill7537 Also I would think only cutting and welding a small section at a time, the go to the opposite side, start again, and keep going side to side in a pattern may help. OR make a self contained jig weed to the back of the rim & to the center before any cutting is done.
Video Idea: See how many windshield wipers can be installed on the entire body of a car. So that in the rain, it sheds water like a dog shaking itself dry.
@@yiayiosmalakas9076 Lol, however, this is Garage 54. Garage 54 operates using the principles being that they actually want to try to see what happens, in the name of science. #Physics
Pretty incredible to free weld all those pieces just on the ground No jigs, clamps or centering fixtures. These guys are taught very well how to make do with very little. Kudos.
instead of welding materal on "causing distortion" draw cool design and make a carboard template plasma/zip-cut materal out of existing steel wheel inwhich you did so i guess you conqard this expirment very nice work guys
@@julikb yes cutting two sections out across from each other first and filling them, then the next sections.... its possible the rim could have been kept straight.
I saw a car on the road that did that...picking up his kid at school..do you know that as he made a slow turn..two tires came off the ground. An old Impala. Trippy.
you are always going to have issues with balance unless you cut and weld on opposite sides, cut one section out and weld in your pieces then rotate 180 degrees and do the same, repeat all the way around. that will keep the heat flex from throwing the hub off center
Just weld up a jig to hold both the rim and hub piece - you need it to do all 4 anyway. Then cut up the rim all at once - easier to clean up all surfaces. Welding it up "piece meal" didn't work out.
Love to wach this in english (i know Russian), more than video I Love comments, because russians just shout on them, būt you guys understand them and on this Chanel they don't have much haters.
not just russians its generally a slavic thing to shout and argue for any reason you can find just coz its fun plus most of the audience on original channel are kids from Вcuntакте so they are just plain dumb
Wow! This guy needs to have his own TH-cam channel. A little wobbly, but hey he gets an A for effort. I like people who are willing to try despite the difficulties, 👍🏻👍🏻👍🏻
Y'all are awesome as usual. I'm 1/8 Russian myself and I love you guys and hold a high degree of respect for Vlad. Y'all have the best leader, at least in your part of the world if not possibly anywhere
A fan from the usa...yall did a hell of a job.. I know you rush things for the video but I bet if y'all took your time and clean that thing up they will look badass
![ทัศนศึกษาโรงงานผลิตโค้ก [THAI/ENG SUB]](http://i.ytimg.com/vi/M9y-TJBNem0/mqdefault.jpg)
The decadent West: *BBS*
The people's Garage 54: *ББС*
soviet theme plays
Lool
CYET ! ...............
Normalna mechanika nie bardzo się opłaca
Aq
*Wheel makers hate him.* Man gets his car stanced AF with this one weird trick:
😂😂😂😂 God I freaking hate those ads
Lol
Damn, you got me to click!
I wonder if there’s anyone who believes these ads.
Still better than ebay parts that ricers use on their civics
What makes them perfect is they have a bit of a wobble
Welding heat deformed them. Lower amperage would be a lot better. The Steelie is too thin.
@@charlestannehill7537 Also I would think only cutting and welding a small section at a time, the go to the opposite side, start again, and keep going side to side in a pattern may help. OR make a self contained jig weed to the back of the rim & to the center before any cutting is done.
Nice and safe👌
Made legit and Russian
"a bit"
That's the definition of self build.
Everyone can buy BBS wheels, but build them by himself? This wheel is truly art.
I'm starting to get the idea that the interior has been ripped out of every car in Russia regardless of how nice it may still look on the outside.
All racing cars are like that, not including roll cage. XD
Lol me 2
Home decor is done from car interior in Russia
Aaron Hayden its in the house
In Russia, car interiors you...?
video idea: try to give a Lada so much negative camber that the tires are nearly horizontal.
E
Pr
Qfh
O
I
Video Idea: See how many windshield wipers can be installed on the entire body of a car. So that in the rain, it sheds water like a dog shaking itself dry.
i was going to ask could they do that but i remembered they are russians
🤣🤣🤣yoo LMAO
@@yiayiosmalakas9076 Lol, however, this is Garage 54. Garage 54 operates using the principles being that they actually want to try to see what happens, in the name of science.
#Physics
lowriders could do that
my only regret it life is I cannot give more than one thumps up to this comment.
Another idea: maybe DIY low cost "racing" Camshafts? like welding a small stripe of metal to increase the lobe on the cam.. How the engine will react?
✝️🇺🇸👍 lol did that years ago just to prove it could be done and omg getting center lines was a nightmare
You mean you want to give the Cam and extra lift maybe I'll give it that potato potato sound
That'd be kinda cool
Garage 54 make this happen cam the ladas!
@@blackriflex39 do ladas have cams lol
In Norway we say "langt ifra fin, men fin langt ifra"
Translated would be something like "far from fine, but fine from far away".
Good enough?
Good enough?
We call it a Picasso, down here in South Alabama. Looks fine from a distance, but it looks all fucked up, up close.
Nice from far, far from nice
Good from far
But
Far from good
👍😉
BBS: " Hey that's copyright, we going to sue"
garage 54 guy: " Laughs in Russian "
Mom, can we have BBS?
Mom: We have BBS at home
BBS at home?
Mom gets BBC instead
Bulletin board system!!
@@FijiLaw Big Bad Coronavirus
@@Ghani_1 i
ahhh here it is. i found it.
5:25 Very balanced wheels:)
More than they need to be lol
That's what you got them 20 grams wheel weights for.
I don't even think thats a balance issue, i think its just not true...
You can adjust it with a big hammer.
for this you may need lifting weights :D
Me : Mom can we get bbs?
Mom : we have bbs at home.
Bbs at home.
Classical russian tuning haha
Still looks great eh
So good
I’ll make you BETTER BBSs
“Now with 40 hours of man made labor we have 1 BBS... now let’s work on the 2nd rim..”
Lol
😂 right
😂😂😂🥇🥇
Pretty incredible to free weld all those pieces just on the ground No jigs, clamps or centering fixtures. These guys are taught very well how to make do with very little. Kudos.
It looks exactly like a BBS wheel that has been handbrake turned into a kerb😂
Kerb? You mean Curb right?
Lmao
Lunar Pitch Plays - No, it’s a kerb... because it’s in Russia!😂
Love the vids. Try making a rim using old spanner’s as spokes.
OMG that would be soooo cool ,
That's a fun idea
That would look really cool!😁👍
Next vid: Making a Turbocharger out of a waterpump!
or a similar but larger belt driven compression blower
@@modelnutty6503 That would be a ghetto pro charger
And well call these BBS STYLE 54’s
instead of welding materal on "causing distortion" draw cool design and make a carboard template plasma/zip-cut materal out of existing steel wheel inwhich you did so i guess you conqard this expirment very nice work guys
yeah plasma cutting the pattern would be so much easier. it would also be easier to keep everything straight.
I highly doubt there would be enough material left with this kind of design
or try welding one pattern then the oposite direction.....i do not know the technique termin....cross method?
@@julikb yes cutting two sections out across from each other first and filling them, then the next sections....
its possible the rim could have been kept straight.
@@modelnutty6503 Yeah, but what would be the fun of that ?
In terms of fun factor, wabbly > straight.
They got it right :)
In Germany we call this: STILLGELEGT
betriebserlaubnis?
Das Gesicht des TÜV Prüfers wäre es wert.
Haben sie dafür eine ABE?
Beschlagnamt und wird vom TÜV geprüft
kannst Du sowas von knicken, damit würde ich keinen Meter in der Gegend rum fahren.....
Russia doesn't use bench vises, just their bare hands to hold parts.
The guy that needs the thumbs up is the welder/fabricator. That guy has talent and skill. Great job & great video.
All seems to be well, cuts to footage of the wheel twerking
That wheel is shaking like a belly dancer! Awesome job guys.
When you buy a set of BBS’s on wish 😂
Next video: Jack up a car and fit the smallest rims and tires possible on it.
I saw a car on the road that did that...picking up his kid at school..do you know that as he made a slow turn..two tires came off the ground. An old Impala. Trippy.
The tires had the diameter about the same as my hand truck. A wheel barrel..only 8" wide or so.
You need space for the brakes so you won't be able to go that small without changing that too.... Which no doubt they'd do haha
@@6project6nightmare6 they should just put rubber on the outside edge of the discs and turn the brake itself into a wheel.
@@StanTheObserver-lo8rx that's called a donk isn't it?
This is my favorite DIY channel.
perfect balance :DD
It's not balance causing it, it's misalignment with the welding. It's not level
It looks pretty good from a distance
Well.. you have to be pretty far back.
While the spotwels.is invisible like 10 meters away... that horrible bult circle is not.
Like AvE once said, good from far, far from good
They're called social distancing rims.
China: no one makes more and better knock offs than us
Garage 54: hold my vodka
This is the best comment on this thread.
Selfmade bbs wheel looks nice and the Mercedes maaan old-school so sexy
3:52 what happened to the roof of the Mercedes?
They probably removed the sunroof for weight reduction and welded in a normal steel plate and didn't have any time to paint it.
Full-on Gopnik BBS. LMAO!
Your techs do some good work for making custom wheels. Keep up the great work! I love your videos 😎
You guys are top notch fabricators even if you're just messing around
"We even painted it the right color." LOL You guys are hilarious.
Beau Mancini great work but may be dangerous
Make AMG monoblock wheels out of steelies
You guys make me chuckle with your antics ! Amazing it they look just the same
I don't know you guys but I love you guys thank you hope you guys are well in this time..greetings from California
you are always going to have issues with balance unless you cut and weld on opposite sides, cut one section out and weld in your pieces then rotate 180 degrees and do the same, repeat all the way around. that will keep the heat flex from throwing the hub off center
Just weld up a jig to hold both the rim and hub piece - you need it to do all 4 anyway. Then cut up the rim all at once - easier to clean up all surfaces.
Welding it up "piece meal" didn't work out.
0:51 - Ooo! You have Intro! :D
I m from Brazil! I like you’re work’s!! Nice! Congratulations!!
This channel is like NO OTHER I love it!
-Mom I want BBS.
-We have BBS at home.
BBS at home:
I would like to know how many of these DIY BBS are in daily use in Russia...
Man you guys are great, love the creativity on this channel.
You have an awesome crew.. they all seem really good at what they do
Love to wach this in english (i know Russian), more than video I Love comments, because russians just shout on them, būt you guys understand them and on this Chanel they don't have much haters.
I wonder if they read the comments on the English channel, they'd be missing on some video ideas is they don't.
The Russian commentors on the original channel are just the worst...
@@Kluneberg I go through the comments every know and then, if I see a good idea - I relay it to G54.
what? why would some russian hate them? it makes no sense.
not just russians its generally a slavic thing to shout and argue for any reason you can find just coz its fun
plus most of the audience on original channel are kids from Вcuntакте so they are just plain dumb
Love this channel
Hats off to the welder who did all of that tedious work!
Wow, this old Merc is a true old-school beauty! And the rim actually looks decent.
You know, after watching them make that wheel, I’m questioning if that’s even a Mercedes
Dude, your comment had me laughing so hard.
You sir have the best comment on this vid
Use a dremel for cleaning up and detailing the rest of the weld lumps ...
Except for the wobble you nailed it again. Oh yes let's be considerate of people next to us.
Wow! This guy needs to have his own TH-cam channel. A little wobbly, but hey he gets an A for effort. I like people who are willing to try despite the difficulties, 👍🏻👍🏻👍🏻
Greetings from the international space station!
Conrad Kenneth lolololo
The hungarians make rebar wheel 😀😀 Junkbuilds JB-1
Thanks for all the effort you put into these videos
Very impressed by these guys!!! I love your videos
This video is for all low budget miata(or jdm) owner ...
Clickbait thumbnail. While this was very impressive, the “after” pic is an actual BBS wheel. Their wheel looks very hand made.
That's my favorite wheel thank you for showing how to make one
Y'all are awesome as usual. I'm 1/8 Russian myself and I love you guys and hold a high degree of respect for Vlad. Y'all have the best leader, at least in your part of the world if not possibly anywhere
Next video: making a helicopter from a tank.
Who is a fan of garage 54
Turned out damn awesome :D
"all seems to be well". Cuts to shot of wheel wobbly as fck. 🤣. Brilliant.
Massive wheels!!! Please!! Maybe 20" or 22" 🤟 also wide wheels!
This! Donk a lada out.
Liquid nitrogen in oil fill WHILE RUNNING
Garage 54 deserve more subscribers comes with so much experiments and crazy ideas a big thumbs up from me garage54
My congratulations to the one who made that wheel, it was beautiful!
The first clickbait of the channel's history? Great job tho!
Not a clickbate, they made it
Why is this clickbait? They did what the title said, made a bbs wheel of a steel one
Please don't drive on the roads near me if any of you fellas make these wheels, thanks.
Man that's a rockin lookin Merc lol
Nice work. Looks great! Thanks guys
That looks very good. Well done 👍👍
You guys are insane... Greetings from Colombia!!
Привет 🙋❤ from P.A. Amazing as always...
Lightweight full stripped out lada with a welded diff.. Would a stock lada drift??
"All seems to be well"
Wheel wobbling as hell 😆😆
My compliments to your fab and welder, he does a great job with tools and materials at hand.
Dope af!! Wheel companies will talk shit, but I love this kind of stuff!! Great work💯💯
Deep dish steales, seen it done once before and they looked beautiful.
wow they look amazing didn't expect
I would like to see you make some Kosei K1s. They might be my favorite wheel right now.
I have to say that's a beautiful wheel good job you guys
That wobble it has is on point 😂😂😂😂
I like how they made the Lada look like Mercedes
Lol
These guys always amaze me!
All and all it looks really good! I'm surprised!
Your welder is amazing. Sure he lacks artistic beauty but shit he can definitely recreate from nothing. Awesome.
not a welder are you?
Everybody's gangster until the wheel snaps. 😎
These guys have the patience of saints, nice video
Thats alot of work for one video respect!!
A fan from the usa...yall did a hell of a job.. I know you rush things for the video but I bet if y'all took your time and clean that thing up they will look badass
you guys nailed it hands down
Since summer is coming we need a homemade ac for Lada
That's actually a good idea, make ac for lada
Great 20 footers. Actually very convincing. Nice job...
That's pretty cool bro🔥🔥🔥