Welcome to the hobby bro. You remind me of a new guy at my local track about ten years ago. Everyone made fun of him because he looked different and talked different from what everyone was used to. He kept at it and was set on learning everything about the hobby and within a year or two he was one of the fastest guys on the track. Nitro can be overwhelming at first, but give it time and engine tuning and electronics tuning will come naturally. Keep at it!
Always turn the radio/controller on first before you turn the car on. If not that car can take off on his own💨💨💨 and you'll have no way in stopping it💯💯💯
@@cradz4979 Bro it doesn't matter if it's nitro, gas, electric etc...I've been in this Rc world since I was a kid and I'm 42yrs old now. I've had my car run off on me with electric and nitro, and since then I've made sure the majority of all my radios/controllers have "Fail Safe" etc💯💯💯
@@kenricknelson310 same here “bro”. Been in the hobby over 35 years. I get it radio then receiver. But he was just demonstrating the electronics. He went directly to his radio after turning the car on. Not a big deal for his demonstration. The nitro motor was not on so the vehicle was not going anywhere. Secondly it’s failsafe equipped from Traxxas so with the transmitter off the throttle/ brake servo defaults to neutral. Modern technology does away with our old safeguards. Just take it easy “bro”!
@@OwenSolomon-ux9le I've only a had a few nitro rustler nitro.. team associated buggy.. I had a big red monster truck nitro had a few china nitro little cars . Had a 4 tech Traxxas nitro car to
You like the sound of the nitros because you like motorcycles and that's something that makes the sound that you like. But like one of the guys said don't rule out the electric. You'll like them better because you can run electric inside and you can run them outside. Nitros can be similar to weed wackers they can be very very temperamental
You like bikes idle too, but this is also RC cars. It's very addictive to you too. Once you get to running them you want to go faster. You want to jump higher and you keep getting into it
I dont think he cares probably did this just for conent an knows he gettin all that money back 😂 but i didnt dog my Hpi like that when i got it new i followed directions like a basic bitch😂
You got it running way to lean, especially with it being new. The fuel is what lubricates the engine. You should be seeing a blue trail of smoke at full throttle. If you keep running it like that you may damage the engine.
I got my first Jato in 2005! It was the 2.5 version! Get the rechargeable battery and put it under the engine. There's a compartment for it, and you can charge it next to the receiver box. And by the way, you dont have to do all that with the radio and receiver, ALWAYS turn the radio on first, and then turn the car before you start the engine! 💪🏾👍🏾👊🏾✌🏾✊🏾💯
Be sure you do your heat cycles. After each run I would bring your piston down to low pinch with the fly wheel so when it cools it will keep your cylinder tighter for longer life.
@@djjoeykarma2898one my biggest regrets is getting rid of my nitros. I sold my Losi MT TEN Nitro truggy in 2012. They discontinued and can’t even find em for sale anymore 🤦🏿♂️
Nicely done as an ex racer and tuner, always turn the controller on 1st,when it's a new engine there's a break in procedure where you do1/4 throttle or so and drive 2 tanks of gas through the block before WOT etc. When tuning the engine itself don't adjust anything until the engine is at operating temp between 200 and 220 or so then you get a better tune and you want to run it rich for those 1st few tanks to fully coat the engine during the break in period. And the servos need to be reversed is all then the controller is doing the backwards thing but great watching you learn and tune bro. BOTH gas and electric are fun. Enjoy..MD in the house.❤
Push the throttle forward for reverse. You will never be done tuning that. I’m never done with mine. Then start looking for high performance parts. A pipe, gears, tires. It never stops!
Yaaah buddy, sent it straight outta the box! Tho, it will give you some experience in rebuilding an engine when it does warp and something bends, Its all a learning experience dude! Next time, giver a tank of idle on first start, then slowly each tank giver more and more, and that way you'll work the engine in, and nothing should warp or distort unintentionally.
I don’t care for the electric rc, simple because I like to hear my motor with my aftermarket muffler. Then I add smell good to my fuel tank, that Revo 3.3🔥
You have to calibrate your throttle and then do some tuning and then you have to run 2 or 3 tanks of gas without driving JUST LET IT RUN. That’s with all nitro ‼️ HAVE A BLAST bro 💯
Also the screw that u turned next to the blue cylinder the one that sticks up with the black plastic is for ur lean and rich adjustment it sounds like ur running it a lil lean
Oh u gone do some tuning this the game u in ...most guys that hate this process of nitro rc if u a real engine head it won't be a problem for u to pick this up shoudnt gun your motor before u break the engine in u have to slow down and run a few tanks through it first..u have your throttle trim may be backwards on your transmitter
After owning several gas and nitro cars/trucks just give me the straight battery ones now...they are faster and way easier to maintain..I hated tunning mine
Welcome to the RC world my guy. Don’t forget you have to break in that engine. 1: Run 2 tanks through with no throttle. Just sitting on something with the wheels of the ground 2: run 2 tanks through at a quarter throttle (don’t punch it) just good even throttle 3: run it like crazy though a full tank . Then let there motor cool. 4: have fun and don’t forget to keep your air filter clean. Just some tips my guy 💪🏾💪🏾
Man any question you have you can look it up on youtube or google. Just like full size vehicle's most things have to be fine tuned to get them to run at the best. Also when tuning, use small incremts like an hr at a time. Good luck!
Get a fail safe especially on nitro. Someday you will love brushless the power is brutal. I like the pull start better it deletes weight. Get rid of the double aa batteries and get a battery pack thats rechargeable for the car. Remember radio always on first. You will learn on setting the throttle to make sure its at idle but not on brakes i could teach you a ton for rc.
It bogged it is lean. You got the right idea, tuning i do it all by ear . Id tell ya anything and would love to chat i been rcing for 35 yrs . Its great man. Maybe a bit richer a light trail of blue smoke it great. Temp guns best for bytro its a must so you can lean it but not be to lean. I can do it by ear but sometimes you dont want them to hot. Soon you will want a x- maxx and will be running 8s 😊 i miss the old savage flux that truck on 6s was mental. Standing back flips. As your engine breaks in it will gain power. I was going to mention the throttle to check it. You have to adust servo throw and end points or the rods. Ypur doing great at tuning sounds good man. You know all that from bikes bro.
Hey bud grab a cheap infrared thermometer and check those engine temps, ill bet it was running hot cause it sounded a bit lean. I have a slayer pro 3.3 with a bunch of upgrades, lots of fun. Welcome to the hobby
Welcome to the RC world by way got one of best RTR cars out there 3.3 is great for the money it has a 2 speed transmission you hit it then hit it again that's what made me love Nitro I have a 3 speed hobo with much bigger motor the jato 3 .3 was my first it was love for Nitro Welcome to hobby ❤😊😊😊❤🎉😢
bro really just reintroduced me to my childhood. i always wanted rc cars growing up and i can now lmfao bruhh why the fuck did i get on youtube today :D
Need a bit of smokey smoke coming out of the tail pipe,just like a 2 stroke! You know... so ya don't burn um up... it sounds a touch rich. That might help with the idle
Next time take off the air filter so u can get a look at the idle gap usually its wide open from the factory you want it as closed as possible but still allowing fuel in thats the only screw u should have adjust for breaking in a new engine after broken in u can adjust the hsn an lsn
welcome to the hobby, just fyi you supposed to break the engines in. They like irl cars so you gotta be gentle with it. And don’t always pin it or it will blow the motor. If you ever decide to upgrade it, i would recommend the OS.21TM motor i got it for my drag build nd it goes 80+
Welcome to the "Rc World" my boyy😁😁😁👍👍👍💯💯💯
Welcome to the hobby bro. You remind me of a new guy at my local track about ten years ago. Everyone made fun of him because he looked different and talked different from what everyone was used to. He kept at it and was set on learning everything about the hobby and within a year or two he was one of the fastest guys on the track. Nitro can be overwhelming at first, but give it time and engine tuning and electronics tuning will come naturally. Keep at it!
Why… was he a black guy?
@@imn11thug😂
Always turn the radio/controller on first before you turn the car on. If not that car can take off on his own💨💨💨 and you'll have no way in stopping it💯💯💯
I learned that the hard way two axles 1 tire new rack and pinion now I know 😊
Absolutely true. However this is a nitro that’s not running so he had no worries of a runaway.
@@cradz4979 Bro it doesn't matter if it's nitro, gas, electric etc...I've been in this Rc world since I was a kid and I'm 42yrs old now. I've had my car run off on me with electric and nitro, and since then I've made sure the majority of all my radios/controllers have "Fail Safe" etc💯💯💯
The newer ones won’t do that anymore, back in the day yeah
@@kenricknelson310 same here “bro”. Been in the hobby over 35 years. I get it radio then receiver. But he was just demonstrating the electronics. He went directly to his radio after turning the car on. Not a big deal for his demonstration. The nitro motor was not on so the vehicle was not going anywhere. Secondly it’s failsafe equipped from Traxxas so with the transmitter off the throttle/ brake servo defaults to neutral. Modern technology does away with our old safeguards. Just take it easy “bro”!
You have to break those engines in
U don't have to but it's better to break it in
Dont n see what happens lol.😤@heavenlyvibes7102
Then why do 'break in procedures' literally come with all nitro engines? You've obviously never owned or ran nitro before.
@@OwenSolomon-ux9le I've only a had a few nitro rustler nitro.. team associated buggy.. I had a big red monster truck nitro had a few china nitro little cars . Had a 4 tech Traxxas nitro car to
@@Gorealaracer38 find me a TH-cam video where a new rc nitro blows up from not breaking in ... I'll wait ... There are none
"1nce a motorhead, always a motorhead"...true words spoken my friend 😊
You definitely want a little more blue smoke coming up out that exhaust to my boyy💯💯💯
You like the sound of the nitros because you like motorcycles and that's something that makes the sound that you like. But like one of the guys said don't rule out the electric. You'll like them better because you can run electric inside and you can run them outside. Nitros can be similar to weed wackers they can be very very temperamental
I use to have one, but mines was battery operated. Its addictive but man its also an expensive ass hobby. Im down to see the videos forsho
You can adjust the gearbox to come in early or later. Seen it has a two speed gearbox
You like bikes idle too, but this is also RC cars. It's very addictive to you too. Once you get to running them you want to go faster. You want to jump higher and you keep getting into it
Jato a top dawg ! welcome to the Rc World Homie ! 🔥🔥
You’re really about that small bore life. 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉 keep doing what you do fam
I have a tmaxx 2.5 . I love rc. Good to see nitro still alive
Out the box u are supposed to run it rich for a few tanks Vee, supposed to be hella blue smoke coming out of exaust
The banshee of the rc world. It got two gears too. I got one of these like a year ago. Super fun rc
Do not give up whatever you do, stick with it no matter what! 💯
You got the book when you bought the car. Follow the breakin procedure bro. Youre gonna blow the motor
He just running it full power with out breaking in the engine 😂😂😂 bro he definitely going to blow the engine running that jato with out breaking it in
I dont think he cares probably did this just for conent an knows he gettin all that money back 😂 but i didnt dog my Hpi like that when i got it new i followed directions like a basic bitch😂
You got it running way to lean, especially with it being new. The fuel is what lubricates the engine. You should be seeing a blue trail of smoke at full throttle. If you keep running it like that you may damage the engine.
What you said
The rc hobby is greater than being inside on device or gaming all the time!!!!! 😊
😊 dude that happened to you too with a new car😮💯👍 thank you for letting people know because a lot of people don't know the reset that controller 💯
Hey man i just had to let you know your energy is awesome u seem like a cool chill dude.
Y’all already know the vibe!! RC VIBES!
I got my first Jato in 2005! It was the 2.5 version! Get the rechargeable battery and put it under the engine. There's a compartment for it, and you can charge it next to the receiver box. And by the way, you dont have to do all that with the radio and receiver, ALWAYS turn the radio on first, and then turn the car before you start the engine! 💪🏾👍🏾👊🏾✌🏾✊🏾💯
Once you get use to tunning them you gonna want more and more lol
Be sure you do your heat cycles. After each run I would bring your piston down to low pinch with the fly wheel so when it cools it will keep your cylinder tighter for longer life.
Never thought I’d see u get into the hobby it’s a blast
Probably the best looking RC in that category.
Welcome to the Nitro Gang bro
Vee don't write off the electric cars they are fast as hell just found out one of my co workers races these cars at a local track
I got rid of my nitros, all electric rc's now, simpler maintenance & u don't need fuel
@djjoeykarma2898 yup I had a t max back in the day sold it for a e max still have my og rustler about to rebuild it and get it going again
@@djjoeykarma2898one my biggest regrets is getting rid of my nitros. I sold my Losi MT TEN Nitro truggy in 2012. They discontinued and can’t even find em for sale anymore 🤦🏿♂️
Nicely done as an ex racer and tuner, always turn the controller on 1st,when it's a new engine there's a break in procedure where you do1/4 throttle or so and drive 2 tanks of gas through the block before WOT etc. When tuning the engine itself don't adjust anything until the engine is at operating temp between 200 and 220 or so then you get a better tune and you want to run it rich for those 1st few tanks to fully coat the engine during the break in period. And the servos need to be reversed is all then the controller is doing the backwards thing but great watching you learn and tune bro. BOTH gas and electric are fun. Enjoy..MD in the house.❤
I’ve been building mine for awhile now but it’s good two know your getting into the hobby
The Rc addiction is real my friend 👍👊🏻👊🏻
I got sane one nice to see you get a mini 2 stroke
WE STILL RUN IN JACKSONVILLE!! 'WINTERFEST'! IN DECEMBER...132FT 10TH SCALE DRAG RACING ON PORT A TREE...1320 ON 10TH SCALE=132FT.
The Jato is so much nicer than the Rustler bro!! Two speed transmission and just built better… oh yeah, bigger motor too
Oh yeah, one of my favorite cars ever me and my brother would race those in the parking lot so much fun
Awesome Brother nitro is great but it has a big learning curve 😁👍 just subscribed 👊
And please don't use WD-40 anywhere around the engine it will cause many problems 👍
Right on!
Welcome to the rc world gang
The v touch outta da box 🇬🇧
Push the throttle forward for reverse. You will never be done tuning that. I’m never done with mine. Then start looking for high performance parts. A pipe, gears, tires. It never stops!
yeah I noticed that with mine it just spins it round
I'm about to start, I remember a guy my mom talked to used to race them and he took us to a track once. Fun times
That’s when the bike 😂😂😂 bro stop playing #KeePupthegoodwork
Nice video great run through of this car thanks 🤘✌️I hit subscribe
Yaaah buddy, sent it straight outta the box! Tho, it will give you some experience in rebuilding an engine when it does warp and something bends, Its all a learning experience dude! Next time, giver a tank of idle on first start, then slowly each tank giver more and more, and that way you'll work the engine in, and nothing should warp or distort unintentionally.
One of my favorite rc cars look up jato drag racing but trunk it brushless if you looking for speed but I like the sound and smell
Now you talking v. That's what I do. I got about 50 of those RC cars that is
I don’t care for the electric rc, simple because I like to hear my motor with my aftermarket muffler. Then I add smell good to my fuel tank, that Revo 3.3🔥
Rc Boca is the spot in Deerfield!
Cool whip. Jus read everything and learn how to adjust the tune in the cold weather
You should do the brake mod flip the brake arms from factory they limited to the pull power for brakes if flip the arms you get better braking power
Last nitro race $3200! Last BIG electric race $9200!!! 'Cali vs the world'!
You gotta break it in by going and Breaking I had to buy so many alarms for mines from hitting banks it gets costly
You have to calibrate your throttle and then do some tuning and then you have to run 2 or 3 tanks of gas without driving JUST LET IT RUN.
That’s with all nitro ‼️
HAVE A BLAST bro 💯
Also the screw that u turned next to the blue cylinder the one that sticks up with the black plastic is for ur lean and rich adjustment it sounds like ur running it a lil lean
Wrote all this b4 I peep u tuned her she sound good my guy
Badass car bro good video
Dat bih fast boy lol
Oh u gone do some tuning this the game u in ...most guys that hate this process of nitro rc if u a real engine head it won't be a problem for u to pick this up shoudnt gun your motor before u break the engine in u have to slow down and run a few tanks through it first..u have your throttle trim may be backwards on your transmitter
After owning several gas and nitro cars/trucks just give me the straight battery ones now...they are faster and way easier to maintain..I hated tunning mine
I've had this same one for few years broke control arms more than once went with the up graded ones the third time
Give it the Vee Touch!
Line it up my boie😂
Get you at temp gauge so you can watch the temp and lean the fuel in and out as temp goes up and down
Welcome to the RC world my guy. Don’t forget you have to break in that engine.
1: Run 2 tanks through with no throttle. Just sitting on something with the wheels of the ground
2: run 2 tanks through at a quarter throttle (don’t punch it) just good even throttle
3: run it like crazy though a full tank . Then let there motor cool.
4: have fun and don’t forget to keep your air filter clean.
Just some tips my guy 💪🏾💪🏾
Idle break-in is the shit of the past. Don't recommend idle break-in anymore.
Idle break-in is the past. Don't recommend idle break-in anymore.
Nitro r/c cars are cool for the sound, almost like a 2 stroke but the electric cars are smoking everything rn!
Wrong,nitro cars will run with'em..10th scale,132ft AKA 10th scale 1320ft on port a trees.😤
Also it would be good to get a temp gage for it
Nitro was my first luv until I met her sister fifth scale then it was like a match made in heaven 😂
I used to have one I miss it thinking about getting another one
I’m coming back! Started with an original tmaxx monster truck(still got it) then down a rabbitt hole!
it has a 2 speed transmision . once the motor tuned in proper it will shift into second sounds like it need more on the high end
Broward Vee always turn the remote on first before starting the car then when you done turn the car off first then turn the remote off
he tuned it out the box for the streets 😅 shi I think it be alright 👍🏼
Nah he didnt follow the instructions he was supposed to run rich during the break in process
You have the radio on reverse!
Switch the red tabs on top to normal you can go reverse or normal with the red switches on top of controller
Man any question you have you can look it up on youtube or google. Just like full size vehicle's most things have to be fine tuned to get them to run at the best. Also when tuning, use small incremts like an hr at a time. Good luck!
Your a few years behind I’m 11 years in with rc racing keep the content coming though
I ain't know he did shi like this but this cool af
Get a fail safe especially on nitro. Someday you will love brushless the power is brutal. I like the pull start better it deletes weight. Get rid of the double aa batteries and get a battery pack thats rechargeable for the car. Remember radio always on first. You will learn on setting the throttle to make sure its at idle but not on brakes i could teach you a ton for rc.
Rubber band
Got my son the Traxxas car for Christmas ima get this truck to ride wit em
It bogged it is lean. You got the right idea, tuning i do it all by ear . Id tell ya anything and would love to chat i been rcing for 35 yrs . Its great man. Maybe a bit richer a light trail of blue smoke it great. Temp guns best for bytro its a must so you can lean it but not be to lean. I can do it by ear but sometimes you dont want them to hot. Soon you will want a x- maxx and will be running 8s 😊 i miss the old savage flux that truck on 6s was mental. Standing back flips. As your engine breaks in it will gain power. I was going to mention the throttle to check it. You have to adust servo throw and end points or the rods. Ypur doing great at tuning sounds good man. You know all that from bikes bro.
Subbed up
Hey bud grab a cheap infrared thermometer and check those engine temps, ill bet it was running hot cause it sounded a bit lean. I have a slayer pro 3.3 with a bunch of upgrades, lots of fun. Welcome to the hobby
Running sweet now
🔥🔥🔥
You should get a 1/5 scale 5sc hpi rc I think you would like it little more with the 26 cc 2 stroke motor
They made my boi switch his game up😢😢they can slow us down but they cant stop us💯💯🫡🫡👊🏿👊🏿havent seen u since u closed the shop respect lil bro💯💯🫡🫡🙏🏿🙏🏿
Welcome to the RC world by way got one of best RTR cars out there 3.3 is great for the money it has a 2 speed transmission you hit it then hit it again that's what made me love Nitro I have a 3 speed hobo with much bigger motor the jato 3 .3 was my first it was love for Nitro Welcome to hobby ❤😊😊😊❤🎉😢
I love it vee but Vell did it first. 🤣💯
You gonna have more fun when you get used to it and get it up to its top speed
I just bought the slash 4x4 it's super fast
Yes you in the rc world now?
That Electric Rustler will change your mind frfr
They slow I use to beat my boy with the nitro rustler and he had a 4s
you need to get the Losi Promoto MX dirt bike
Yup, I have one and they are dope af!
also why is your steering always pointing to the right check controller i think you have throttle turned down so not full movement
bro really just reintroduced me to my childhood. i always wanted rc cars growing up and i can now lmfao bruhh why the fuck did i get on youtube today :D
Need a bit of smokey smoke coming out of the tail pipe,just like a 2 stroke! You know... so ya don't burn um up... it sounds a touch rich. That might help with the idle
Next time take off the air filter so u can get a look at the idle gap usually its wide open from the factory you want it as closed as possible but still allowing fuel in thats the only screw u should have adjust for breaking in a new engine after broken in u can adjust the hsn an lsn
welcome to the hobby, just fyi you supposed to break the engines in. They like irl cars so you gotta be gentle with it. And don’t always pin it or it will blow the motor. If you ever decide to upgrade it, i would recommend the OS.21TM motor i got it for my drag build nd it goes 80+
You have to look at the needles like a 12 hour clock. Only adjust in one or 2 hour increments. This really helped me