Tamiya 1/14 Volvo FH16 Tow Truck Build - Part 2 Chassis
ฝัง
- เผยแพร่เมื่อ 3 ก.ค. 2020
- Part two of a multi part build of the new Tamiya Volvo FH-16 Tow Truck. Full build will feature building, installing the electric actuator set, installing the MFC-03 sound and lights set and set-up/programming a Spektrum DX6e radio.
My email: jacobsenra@hotmail.com
My webstore: hobbyconcepts.net/
Tamiya Volvo FH16 Kit: hobbyconcepts.net/collections...
HItec HS-645MG Servo: hobbyconcepts.net/products/hi...
Volvo FH16 Chassis Ball Bearing Set: hobbyconcepts.net/collections...
Transmission build video: • 1/14 Tamiya RC How to ...
Rear End Build Video: • 1/14 Tamiya Semi Truck...
Hobbyconcepts Facebook page: Hobbyconcept...
Facebook group!! Tamiya Truck Open Studio: / 648718772583781 - แนวปฏิบัติและการใช้ชีวิต
![BOWKYLION - ส่วนต่าง (do it without me) [Official MV]](http://i.ytimg.com/vi/7x-pwcMopzE/mqdefault.jpg)
![🔴 [TRỰC TIẾP] Tứ Xuyên (Trung Quốc) VS BCTT Trường Tươi Bình Phước | Cúp VTV9-Bình Điền | JET STUDIO](http://i.ytimg.com/vi/5nF-PCh_Ojw/mqdefault.jpg)
My RC hero.
ANOTHER GREAT BUILD BY BOB 🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙
Great video - thanks for taking the time to put together 👍
Love your builds great looking kit
Good start to the build BOB 👍
Really excited to see it finished
Me too!
Thank you so much for the guided instructions on this. This is invaluable for newbies like me new to the hobby. Thank you thank you !! Some channels fast forward the builds which makes it impossible to learn.
Thanks for the comments, that is what I am aiming for!
Loved the video, Bob. We're anxious to see this beauty completed & hard at work!
I've found myself in my 60's getting into RC and found your You Tube site. Your videos have been great for a newbie to learn. I have to say my friend you are a TRUE ARTIST. God bless.
I don't know that I am an artist but I DO like making these videos and hope they are useful. I am so glad that they do help. Thank you for the comments! Bob
What area are you located, Kevin? In in Washington state, & we have a local club near Seattle that meets monthly for RC trucking & construction fun!
@@pnwRC. Hi PNW I'm in S Indiana only RC group is airplane. Wish I were closer I'd love to hook up with your group. Take care Bud.
Love your videos Bob. Really well put together and i can follow them. Keep it up.
although i said that i just build my 4th and last truck, i feel like building another one when i watch your builds. It is really addicting. Looking forward for the building progress. Nice job, Bob an d again thanks sharing this!
Bob, this looks like a fun build. The Dual Steering is both clever and proper.
You mentioned in here about knowing from making a lot of mistakes... All of us who have been in the Hobby for Decades feels that sting!! 😖
That's just the "other" definition of Experience!! 😜
Many thanks for this great video build series, it’s been a few years since I have built a Tamiya truck, don’t think I can resist building this one though when it becomes available here in the UK.
Good Video. Surprising to see how close the frames / crossmembers etc are to the real thing.
nice build. have to watch you build since can't afford a monster like this!
I just checked out your store.it was easy to find tricks or parts on it.i wish you had a tandem dump truck kit on there
Would love to see a tow truck using the conventional cab like here in North America. Looks like a fun build Bob 👍🏼
Grand Hauler Tow Truck! I agree!!
Grand Hauler Tow Truck.. I am starting the process of trying to build one. Don't know that I can but will try!@@HobbyconceptsLLC
How about a Globe Liner tow truck?
It would be simple to use extended frame rails and make this truck with a King/Grand Hauler cab. Just don't install the 2nd front axle.
Nice building video as usual. My gearbox on the european scania R470 uses the same short springs with the washer and Clip between both spring. It looks they took some of the good point of european truicks an american trucks to build this New Volvo
Have you tried using JIS screwdrivers for the builds? They are very nice to work with ....
In 2020 why is Tamiya not including ball bearings in their kits? Especially an $1100USD kit. Other than that, great build so far!
I see thet tamyia still use the front steering like all other cabover euro style trucks. Mine are all modified to get the correct akerman angel. The stock configuration with the steering rod in front of the axel will reverse the akerman angel and the outer wheel turns charper then the inner one. It will affect turningradius and the tyres will drag on sharp turns. The mod is simpel, turn the nuckels around like on the second axel, bend the steeringrod to clear the gearbox and make a new hole for the short servorod on the nuckel, this short rod may need to be shorten to fit.
Can you get a stretched Pete with a 110 bunk I have built models but never a rc but I'm a big fan of the 379 ex hood and would love to have one to my collection
Is the remort control given ?
Hello hobby concepts
Can I ask ? Do you make a purple hauler. I wish have a hauler and trailer
Will be interesting to see if you get any digital servos to work with the MFCs from Tamiya. I could never get any digital servos to work consistently with the Tamiya MFCs. Seems like they only like regular analog servos.
I use digitals regularly and they work fine for me.
Hobbyconcepts-LLC good to know. I better try a few more brands. The last one I tried that I was pulling my hair out was a digital LiFe PowerHD. Can’t remember if it was a 20KG or 35KG.
Very nice video! I saw bearing sets on the Hobbyconcepts website. Do you plan on putting together a Globetrotter bearing set for sale as well? I'd love to buy a set!
Yes, it is on there: hobbyconcepts.net/products/sealed-ball-baering-set-volvo-fh16-chassis?_pos=4&_sid=303dc5857&_ss=r
@@HobbyconceptsLLC Thank you for the link! You Hate e-clips as much as I do! Take a look at: Dynamite Ultimate E-Clip Tool 1.5MM-5MM, DYNT1107. It's a great tool and not too expensive.
The drive shaft is longer because the gearbox is mounted more forward on this than on king hauler?
The rear axles are mounted more rearwards on the frame.
Can you put separate servos on the front steering just wondering if you could have separate servos that are linked to the same controller
You probably could but would take some fabbing to make mounts etc.
Why using a mfc? Do you know the soundmodule from beier? mor options for light and sound!!
I really like the Beier unit (a lot) but want to do this truck pretty stock and with Tamiya equipment. The Beier is great but the learning curve for beginners is pretty tough. Tamiya MFC's are easy to install and work everytime.
Big Longer truck
There is no shocks on the second front axel, shouldn't it be?
None in the instructions. Glad you are watching close!!
@@HobbyconceptsLLC later wil it fit ,when the sub frame is placed than comes shocks on it
how many more videos are you going to have for this tow-truck
Probably be about 6 total.
how much will it cost to get a king hauler and a trailer from you
I have got to stop watching your videos every time I do i order something from you
Ha! And I do appreciate it!!
Beri aku satu mobil rc 🙏
holy cow their kits are expensive
Thread lock into plastic is a bad idea!
That is why I use threadlock only on metal parts.
banyak cakap gk kerja