I have never seen anyone have a harder time with such a simple device. I have several of these and have used them easily running through forests or climbing. I never had any of the issues exhibited in this video. It is a super device and I suggest that every photographer that walks a lot and wants immediate access to the camera to purchase one. I think this is the best thing peak design makes.
Love that you do things that are realistic (with humor) rather than the manufacturer's videos which tend to be set up to make everything look easy. I bought one yesterday but my backpack(s) strap(s) are all wider than the capture clips. I don't ever wear a belt and the thought of wearing a heavy one just to support the capture isn't appealing. I do use a FF DSLR and so am now convinced I'll go with the harness setup from Think Tank which uses the camera strap to support the camera hanging in front...so off the neck. Thanks for the honest evaluation and laughs. p.s. I will now watch your other videos!
That thing is a must when you're hiking or roaming the city all day. It sure is expensive, but it's worth it. However, I think it's better if you buy it in a set. I got mine with a few straps, etc. and was able to save some money. Tip: I'm right-handed and prefer to have it on the left side (backpack strap). I grab the lens with my left hand and push the button with my right thumb. Usually it will be the X-T20 with the 18-55 :3 PS: I wouldn't trust my $1,400 Fuji setup to a cheap one bought from Amazon. I'd rather pay the $70 than having to pay 20 times that because my camera fell on the ground. However, I'd also recommend you check that the screws are not loose before you go out, because if you leave it on and with much use they may get a bit loose. One thing I regret, though: not getting the plate with Arca Swiss mount.
I agree. You need a backpack with a chest strap. I own a peak design everyday backpack and the same capture clip and it works well since the backpack straps are in the rigid side. Did some hiking in Hallstatt and several other cities and it does come in handy. Also with practice and a smaller camera like an x-t2 or an x-t20 you can easily unclip with your thumb.
@@jorge4763 A chest strap connects the 2 straps on a backpack across your chest, they're usually found on hiking/adventure backpacks. F-Stop, Shimoda, Atlas camera bags usually have chest straps. If you're still confused, google _"chest strap backpack"_ and look at _Images_ in your browser.
@@jorge4763 Most serious backpacks ie a proper rucksack have one, they keep the rucksack in the correct position on the back by stopping the shoulder straps from slipping, especially when under load. It is a must if you are going to do any hiking for more than an hour!
Absolutely love mine. With a more full backpack, I barely notice my XT3 is there. It took a little time to get used to, and to dial in where I like it on my shoulder, but now I won't hike without it. Peak Design makes really great products.
I got one of these years ago and literally used it once before realising I'd made a tragic error! Very funny reiew Omar really digging your real world scenario tests ahahaha
Dude, you’re hilarious! I was wearing my noise canceling headphones and laughed so hard during that bird sequence people looked at me weird. Lol. Nice review btw
You crack me up! I adore the Capture Clip, especially in the days I was doing major hiking with my Canon 5D MIII. It works best if your pack has some weight (for counter balance), placing it a smidge higher, and using a breast strap between the shoulder straps on the pack for stabilizing the weight left to right. The clip is also a tripod attachment, so no more fiddling when switching handheld to carry to tripod. On my Fuji XT2 setup when in the city I'm more likely to use Peak Design's sling camera strap so the camera is readily available but I'll put the Capture Clip on my camera bag or backpack if I want to keep the camera from swinging around, e.g. when moving actively or climbing around something.
I'm considering this as Peak Design have a 20% sale on. Sadly, a derth of reviews from users who have boobs, so thanks! Have you ever used it with a full frame mirrorless?
Omar is hilarious. What helps is the fact that the review is not too prepared. Lots of room for spontaneity and things not working perfectly from the get go. But you know what... this is exactly what I need personally: an honest and spontaneous review. Often the best way to point out flaws in a design. Thanks!
I can honestly say this is a game changer for hiking. Neck straps and sling straps result in too much dangling, which is not ideal when scrambling over rocks. My favorite combo is to put the clip on my backpack and attach a PD wrist strap to the tripod plate. That way I can use the wrist strap for security when shooting and the capture clip when I want my hands free.
Very funny and entertaining product overview. There is a million reviews of this thing but yours is definitely the best I have seen. The quick transitions to the birds after saying “bird” was the best.
This depends greatly on the straps on your backpack! On casual backpacks like the one in this video, you're attaching the clip in a way where its underside directly presses on your body. Many proper hiking backpacks have straps where you can attach the clip in a way where the main backpack strap padding is actually in between your body and the underside of the clip (the main strap has a thinner secondary strap on top of it and you attach stuff to only that part of the strap)! I tried the clip with both types of backpacks and I hated the one where it presses on my body (I found it basically unusable), but with my hiking backpack where the strap padding is in between the clip and my body I took it for an 8-hour hike and even after using it the whole day that way it didn't feel uncomfortable at all.
@@selwin2004 Haven't been on the market for a hiking backpack in a very long time, so can't give recommendations. But hiking backpacks have three types of straps: shoulder strap, chest strap, and load-lifter/stabilizer strap which helps position the weight of your pack better. The trick is to find one where the load-lifter strap is implemented so that the adjustment strap runs the length of you shoulder strap (rather than being much shorter), making it possible to clip accessories like this on conveniently at whatever height on the strap you want.
i actually got this clip for the same exact intention- I was going backpacking in banff and wanted to my camera easily accessible, my hands free, and no extra weight swinging around. It didn't work out as great as I hoped. On the backpack strap, the metal really dug into my shoulder over time and was painful. I should try the belt, but also seems like not the best place for hiking or scrambling
I have one of these and I find it invaluable for weddings and events, when working a two-camera scenario. One on a strap around my neck, the other (usually X-T2 with the XF56mm) sits on the Peak Design clip on my belt. I usually have it the other way up so the release button faces downwards, that way I can press it with the ring finger on my right hand as I slide the camera out. Smooooth, most of the time. Just need to remember not to smack the belt camera into the one hanging from your neck strap on the way up! Oh, and make sure your belt's done up tightly enough to support the weight of the camera...
This is an old video by now, but you earned my sub just by showing you can mount it on a belt without the extra $20 belt mount they sell. Love the way you show it off and I’m excited to get mine soon!
I have this (for my x-e3). Here is how I usually set it up. I mount it on on a simple webbing sling (across the chest or around the neck). Pretty much like how a normal camera strap (or the peak design straps work). The great thing is that I can shoot with the strap attached (similar to bottom-mounted camera strap). But I can also unclip the camera while my webbing sling is still safely attached to my body - because it is a closed sling. (Did I explain this to an understandable level?) This is practical - since the base-plate also works as an arca-swiss plate for my tripod. It is also comfortable when switching lenses - clipping the camera in while juggling lenses and in other situations when two free hands are needed. A cheaper alternative is to pick up a webbing sling and attach two of the peak design "coin" thingies and clip one or both of them onto the camera. This also gives peace of heart - since if one of the attachments fail - the sling/camera will still be safe (The first version I made used small quick-clips - similar to the one used on the hand-strap at 9:00 above). In a sense, my earlier mods gave me more peace of heart (even if one can lock the capture-clip button). And no, the capture clip is probably not worth the money (unless one have a wish list for a birthday). It is functional though. I do not like to shoot with camera-strap. I do like to have a hand-strap. This way I can quickly attach the camera to the sling (with hand-strap mounted) - and take it off again equally fast. (When I carry my Freitag message bag I attach the clip to the shoulder-strap to work similarly). .
Just ordered this. Gonna use it on the belt, and they also have this hip pad thing that goes on your belt, and then you permanently attach the clip to that, instead of your belt.
Great and funny review! Also thank you for pointing out muscle memory and getting used to new equipment, I feel like so many people would just chalk that up as a bad design or possibly a negative.
I use one at every wedding, mounting my X-T3 with up to my 90mm on my belt. It is a bit expensive but it's super solid and I trust it. I also use it on my backpack but less frequently.
Dude, you are pure gold, showing the struggles and the good features, pure "everyday-people" review and this is what makes this quality. On the top of this you're funny :D
They also sell a support "pro pad" that you can put on your strap (or belt) and it better supports the camera when on your chest, it helps a lot with heavier setups. Also a chest strap on the backpack is kind of essential to help keep things feel balanced.
Looks like some weight/items in your backpack would stabilise the clip and make much easier to insert/remove camera from clip. As you say, a bit is muscle memory and I find it fine on backpack, but still have preference for belt (and use propad with belt clip mounting)
I have an older version of this thing and I really love it. I use it all the time on my belt. But I have the release button down. So I can release the cam one-handed via middle finger. Very convenient. But you have to be aware of thick lenses. They may scratch on the screws. Think you will love it once you get used to it.
The clip without the plate is cheaper, so well worth it. Once you have one plate, you can use it with all of their other products like the new tripod 👍🏻
I just recently picked up one of these. What I found is for back pack works far better if you have some stuff in the pack to weigh it down also to have a chest strap, those 2 things make a big difference. As far as putting it in and out, I put it on my left strap and hold the lens with ur left hand its much less awkward then trying to hold the grip. When removing, grab the lens with the left hand and use the right hand to push the button. I find this feels safest and easiest.. Also they show in the product video if ur using a small lens like a pancake put the camera vertical so it doesn't flop down like it was for you.. Hope this helps.. Cheers
Just got my two capture clips! one for backpack and one for my belt. Peak design got a "support" thing, that helps keeping the camera steady. PLEASE use this if you make a review, otherwise it won't fit.
If this was a commercial, not sure i'd be interested lol. Edit: Also, I'm new and have been watching several videos lately, and you've been working on the Optech strap sponsorship for like months! Optech give this man a sponsorship already!!!
You are honestly one of the funniest people I have ever watched. 😂 Thanks so much for always keeping me entertained, you should have been a comedian.. 💯
With one camera on a strap and the other on the capture clip - I have found this to be great way to handle event photography. I use the clip on the belt with the Pro Pad V2 and I use the Dual Plate V2 which does allow you use flat screwdriver.
Showing some of the learning curve of new products should be shown more often, good add. First time seeing one of your videos, looking forward to seeing more of them :)
You may have learned this by now, but in case you didn't, the included Peak Design allen wrench, which you detest having to use, actually has an attached key ring attachment on the end. So clever. It's always on my keyring just in case.
Used it last summer while hiking the GR20 (look it up, it's awesome) and I was sooo happy to have it. I could take quick shots, capturing small moments without having to take off my backpack and everything. I wouldn't use it on a citytrip though, way too vulnerable bumping through crowds and it's very consicuous.
This clip has the most use during hikes with a backpack without easy camera access. Fixing on the backpack strap with ProPad support and the bigger bolts , balancing out on the opposite site at your back with tripod/water bottle work pretty good. If you have a camera backpack with easy access you will not need this clip, but will not be comfortable on the long run for your back. I have the clip, pad , leash and slide as well. Although these are not the best looking or most convenient for each situation, their safety/practical ratio is quite high to win the overall how to carry our gear game.
They used a hex key bolt to keep the mounting plate slim. It's also an arca swiss plate so you can go straight to your tripod. Just so you know, Omar, that button also turns to the side to lock the button. I didnt realize that and locked it by mistake and could not get my camera off of me.
I have one on my day pack. It works very well and definitely has become easier to use with time and usage. Other than the initial difficulties getting the camera off and on the clip I only had one gripe. With my Canon 60D with my 15-85 on it the front of the lens would dig into my chest as I walked and overall it just felt bulky. However, with the Fuji X-T3 and 16-80 I recently purchased those problems ceased and it's also much easier to operate the clip.
For your Sony, just load the camera on the capture sideways (so the grip extension is on top of the clip, the lens faces your body, and the LCD/back of the camera is facing your left shoulder. Another benefit of loading sideways is your arm movement is less hindered, and you can access the button more easily.
Been using this for a while and love it. While I don't use it ALL the time, it's absolutely a great convenient option. The only thing that is a bit of a bummer is that it blocks the battery/SD card door, but, then again, what doesn't block that thing? Also, I think it works really well with the peak design sling, not so much their 20L backpack (I'm fortunate enough to have both. The bag was a gift/bought the sling)
Bought one and had the same experience... If you have a backpack with a chest strap then just place the camera between the strap and your chest. Perfect balance. Use a wrist strap to fasten it to your backpack. Used that trick on several mountains!
Holy cow! I am watching your video in Banff Canada because I saw some stranger hiking with her camera clipped to her bag so I googled it and knew this is from peak design! Wow what a coincidence 😂
Thanks for all the hard work you put into your videos mate. I thoroughly enjoy your work, perhaps it's the rampant dad humor that resonates? Keep it up! :)
Peak has said they prefer the allen wrench installation because a coin would not allow for sufficient torque to properly secure the plate to your camera. Their thinking is your camera will literally hang from this plate for extended periods of time, so they don't want to chance that the plate is not tight enough on the body.
I like the idea of the added tightening of the Allen wrench but I seem to be bad at having one at the worst possible time. Also if you follow Rich Baum on TH-cam, he's had problems in which the cinching actually separated the tripod thread from the body of the camera. And neither manufacturer covered the damage under warranty.
It's a nice gadget!! I bought mine used for like $40 and has taken a lot of damage over the years, almost all paint has gone out indeed xD. And still working with no issues. 3 years old many hikes and falls now and then and still working smoothly.
Hi Omar, great video. Live it! I own the older version of this, basically the same but more bulky and with a thread at the bottom (to mount it at a tripod) I used it to carry a Canon G16 (compact camera) first, now I use the X-T20 with serious glass and some film SLR cameras with the FL/FD mount. In my experience it is a great tool to carry your camera and I love using it every time I'm out on the streets. On a backpack make sure it's on the right height and a chest strap helps to ensure shoulder movement but keep it on the left side. On the belt I mount it with the release button downwards because I always release it with my pinky. One handed of course. I guess we Germans are too efficient and probably need the other hand to catch the BIRD! Anyway, check out the straps from peak design. They are awesome as well. Keep it up!
Hi Omar ! Loved the review (especially the birds shots simulation ^^). There's actually a third "secret" way to use the clip, that is not advertised by Peak Design : You can use it on a shoulder strap, and it becomes a sliding sling (then, you barely need to unclip your camera anymore, unless you wanna swap batteries or put it on a tripod). It's by very far my favorite way to use it. Only issue with this method is that for the clip to slide up and down the sling, you have to let a little space between the plates, so you can't completely tighten the screws, and in doing so, they sometimes get looser ocvertime, so make sure every few days to tighten the screws.
It would probably be pretty easy to 3D print an adapter which sandwiches in between the front and back plates with holes for attaching the strap. That way the screws wouldn't come loose as easily.
Im so glad I found your channel. And this review. If that clip were on my belt my pants would be around my ankles, my camera would break, and I would go to jail for indecent exposure
Great video Omar! I bought one specifically for a 14day hike in the Himalayas but the clip hurts your shoulder after a while and more if you are carrying more than 10kg. I stopped using it during the 2nd day...
I love this clip. I use it often with a Canon T7i on a backpack. The key to using it with a back pack is to have a back pack with relatively thick straps along the lines of a hiking pack. I usually have it sitting just below my collar bone. To pull it out of the clip, I always use two hands but my right hand just hooks a couple of fingers under the grip while the thumb goes for the button while my left grabs the lens.
Your are crazy man. That's a good crazy though. Quick tip. The Peak Designs hex wrench has a ring attached. Just put that on your key ring and you never have to worry about not having it when you need it.
After you get used to it and attach it at the proper location on your pack strap (and with a proper pack) this clip is super convenient. That said I do use a 4:3 Olympus, that is a bit smaller than a full frame.
I believe that Peak Design during their latest Kickstarter campaign said that the reason why the camera plate has to be teightned with a hex key instead of just using a coin in a coin slot is specifically because of the Capture Clip. You are supposedly not able to teighten the camera plate securely enough to the camera when just using a coin slot. The sideways motion that the camera will experience when being attached to the Capture Clip on a backpack strap will eventually cause the camera plate to detach itself from the camera, and the result is that you will drop your precious camera. You are supposedly able to teighten the camera plate more securely to the camera when using the hex key to prevent the camera plate from coming loose from the camera, and you dropping your camera.
I have used this for 3 years and lots hiking like 12mile trips and vacation travel like Europe and Disney usually D5300 with 18-200mm. You need a hiking style backpack with waist belt, sternum and good shoulder straps I use a osprey 30l with day hiking gear or travel gear. It is very solid and pretty easy to use.
It's totally worth it. I bought a knockoff version for $25. It works aok. But fit and finish of the Peak is VERY VERY good. It feels better, and therefore works better.
Just got one. Can confirm that if your pack doesn't have a lot of weight on it with thicc straps, it'll be really *really* uncomfortable. For backpacking with one of those top-open packs (damn them to hell) it makes camera use a dream and you hardly notice it on your shoulder.
Best to put it just above the strap buckle. I used it on a 5 day hike in Wyoming a couple years ago with a Z6ii and kit lens. I loved it. Maybe a heavier pack allows it to work better. The button took a little getting used to.
I use on the right side of my backpack strap. I use my right thumb to push the button and left hand to lift out the camera. Comfortable and quick for me. I use a Cannon R5 with RF 24-105 lens for my general hiking/street set up
I have the previous version that I bought to use with a Pentax DSLR. Just got back from a trip to Italy and Portugal using the capture with my newly acquired X-T20. I've generally found that placing the clip low on a backpack strap so the camera hangs at your side almost near your waist is the best way to use it, especially given the small size of the X-T20. On most backpacks this ends up not being the padded part of the strap, but rather the nylon webbing that runs through the adjustment buckle. Hard to explain, but the positioning ends up kinda being like those gun side-holsters guys wear in detective movies under a coat jacket. I was able to walk through crowds without displaying the camera high up on my chest (and looking like a dork), and you can keep your arm over the camera to protect it if needed. Probably would be uncomfortable with a bigger camera but perfect for the X-T20 w/ 18-55. Ended up being a great solution to keep my hands free when not shooting - highly recommend you try that option! Weird Peak doesn't mention such a position in their extensive videos.
I get so caught up laughing at your humor I have to remember to pay attention to all the great info you're sharing. Lol. Yeah, I think I'll stick with my simple shoulder strap for now. Thanks Omar!
Omar, your videos were funny always! Doesn't matter it helps me or not. Keep it coming. You have missed few thing of this clip. I had two, and love it. The plate is also an ARCA type tripod quick release plate. So you could leave it on camera all time if you are using travel tripod. The push release button can turned to lock the button to preventing accidental release. There is belt mounting pad you can buy makes belt mounting easier and very comfortable. There is Pro version for bigger camera with bigger lens.
dude i never go out of my way to comment, but this video was hilarious. i was entertained the whole time. i wasnt scrolling through the comments trying to feed my addiction to information, i was just laughing at how funny you were. especially the bird part haha.
The best use I’ve used this for is amusement parks attached to my pack with a peak camera strap,(the small thin one) on my xt3. That way your streamlined with crowds and the camera isn’t hanging on a strap. And then when you need it, pop it off and you have the insurance of the camera still on your neck.
Finally great unboxing, funny and honest review. Really proud to be Your subscriber! P.S.: You can buy coin-type screw and replace the one on the plate
Love your videos Omar! You got me into the Fuji stuff! Own a X-T20 and been using the Capture clip for more than half a year and love it! I use it on a belt and on the side of a small bag (Think Tank Retro 5). Excellent for hiking and yes also for changing lenses. Whilst in nature it's always a hassle to change lenses. Expensive but good stuff.
Dude...first time I am watching one of your videos. You are funny. I enjoyed this. My black rapid strap decided to say goodbye at the last wedding and my camera dropped on the ground. No damage though. Still...I am done with Black Rapid straps. Have a Spider holster for my one camera...so this clip will do just fine for the left side. Thanks for sharing!
![Next-Level Camera Carry: Peak Design Capture Clip v3 vs v2 + Pro Pad [2023]](http://i.ytimg.com/vi/Bn8LVyAfMMA/mqdefault.jpg)
If you’re going to use this on a back pack I’d recommend a back pack with a sternum strap. It makes a hell of a difference.
I appreciate that you show the initial weirdness and struggles w a new system. I was looking to buy this device as well
Chest strap makes it easier.
I have never seen anyone have a harder time with such a simple device. I have several of these and have used them easily running through forests or climbing. I never had any of the issues exhibited in this video. It is a super device and I suggest that every photographer that walks a lot and wants immediate access to the camera to purchase one. I think this is the best thing peak design makes.
I have the same problems. Returned it
I love mine, def had to set the height on the strap right. I also have my backpack strapped tighter.
"We're walking, we're walk... BIRD!!!" I'd buy an Omar shirt with that on it.
*Hiking =P
yeah that was funny "bird" lol
Still no word on the shirts. When they will be available?
Love that you do things that are realistic (with humor) rather than the manufacturer's videos which tend to be set up to make everything look easy. I bought one yesterday but my backpack(s) strap(s) are all wider than the capture clips. I don't ever wear a belt and the thought of wearing a heavy one just to support the capture isn't appealing. I do use a FF DSLR and so am now convinced I'll go with the harness setup from Think Tank which uses the camera strap to support the camera hanging in front...so off the neck. Thanks for the honest evaluation and laughs. p.s. I will now watch your other videos!
That thing is a must when you're hiking or roaming the city all day. It sure is expensive, but it's worth it. However, I think it's better if you buy it in a set. I got mine with a few straps, etc. and was able to save some money.
Tip: I'm right-handed and prefer to have it on the left side (backpack strap). I grab the lens with my left hand and push the button with my right thumb. Usually it will be the X-T20 with the 18-55 :3
PS: I wouldn't trust my $1,400 Fuji setup to a cheap one bought from Amazon. I'd rather pay the $70 than having to pay 20 times that because my camera fell on the ground. However, I'd also recommend you check that the screws are not loose before you go out, because if you leave it on and with much use they may get a bit loose. One thing I regret, though: not getting the plate with Arca Swiss mount.
A bag with a chest strap would make it a lot more comfortable. Used it on many trips with a dslr and it was the best investment I made.
Hi! Could you please put a link or a picture of the bag? I'm not sure what kind of bag is It, but i'm interested! Thanks!
I agree. You need a backpack with a chest strap. I own a peak design everyday backpack and the same capture clip and it works well since the backpack straps are in the rigid side. Did some hiking in Hallstatt and several other cities and it does come in handy. Also with practice and a smaller camera like an x-t2 or an x-t20 you can easily unclip with your thumb.
@@jorge4763 A chest strap connects the 2 straps on a backpack across your chest, they're usually found on hiking/adventure backpacks. F-Stop, Shimoda, Atlas camera bags usually have chest straps. If you're still confused, google _"chest strap backpack"_ and look at _Images_ in your browser.
@@jorge4763 Most serious backpacks ie a proper rucksack have one, they keep the rucksack in the correct position on the back by stopping the shoulder straps from slipping, especially when under load. It is a must if you are going to do any hiking for more than an hour!
When clipped into a backpack, how do you change lenses that are stored in the backpack?
Absolutely love mine. With a more full backpack, I barely notice my XT3 is there. It took a little time to get used to, and to dial in where I like it on my shoulder, but now I won't hike without it. Peak Design makes really great products.
Always funny, real and honest. Keep em coming, Omar
I got one of these years ago and literally used it once before realising I'd made a tragic error! Very funny reiew Omar really digging your real world scenario tests ahahaha
Dude, you’re hilarious! I was wearing my noise canceling headphones and laughed so hard during that bird sequence people looked at me weird. Lol. Nice review btw
i was laughing so much by myself here and i had to scroll trough the comments to see if im the only one who find him so funny! haha
jajaja hilarious
You crack me up! I adore the Capture Clip, especially in the days I was doing major hiking with my Canon 5D MIII. It works best if your pack has some weight (for counter balance), placing it a smidge higher, and using a breast strap between the shoulder straps on the pack for stabilizing the weight left to right. The clip is also a tripod attachment, so no more fiddling when switching handheld to carry to tripod. On my Fuji XT2 setup when in the city I'm more likely to use Peak Design's sling camera strap so the camera is readily available but I'll put the Capture Clip on my camera bag or backpack if I want to keep the camera from swinging around, e.g. when moving actively or climbing around something.
I'm considering this as Peak Design have a 20% sale on. Sadly, a derth of reviews from users who have boobs, so thanks! Have you ever used it with a full frame mirrorless?
@@arianakhan6665 Yes, absolutely. Used it with my Canon 5D.
Omar is hilarious. What helps is the fact that the review is not too prepared. Lots of room for spontaneity and things not working perfectly from the get go. But you know what... this is exactly what I need personally: an honest and spontaneous review. Often the best way to point out flaws in a design. Thanks!
I can honestly say this is a game changer for hiking. Neck straps and sling straps result in too much dangling, which is not ideal when scrambling over rocks.
My favorite combo is to put the clip on my backpack and attach a PD wrist strap to the tripod plate. That way I can use the wrist strap for security when shooting and the capture clip when I want my hands free.
Very funny and entertaining product overview. There is a million reviews of this thing but yours is definitely the best I have seen. The quick transitions to the birds after saying “bird” was the best.
This depends greatly on the straps on your backpack! On casual backpacks like the one in this video, you're attaching the clip in a way where its underside directly presses on your body. Many proper hiking backpacks have straps where you can attach the clip in a way where the main backpack strap padding is actually in between your body and the underside of the clip (the main strap has a thinner secondary strap on top of it and you attach stuff to only that part of the strap)! I tried the clip with both types of backpacks and I hated the one where it presses on my body (I found it basically unusable), but with my hiking backpack where the strap padding is in between the clip and my body I took it for an 8-hour hike and even after using it the whole day that way it didn't feel uncomfortable at all.
Hey could you give me an example of a backpack that has this double strap?
@@selwin2004 Haven't been on the market for a hiking backpack in a very long time, so can't give recommendations. But hiking backpacks have three types of straps: shoulder strap, chest strap, and load-lifter/stabilizer strap which helps position the weight of your pack better. The trick is to find one where the load-lifter strap is implemented so that the adjustment strap runs the length of you shoulder strap (rather than being much shorter), making it possible to clip accessories like this on conveniently at whatever height on the strap you want.
looking at reviews for the capture clip but found this channel and love this guy. so funny.
i actually got this clip for the same exact intention- I was going backpacking in banff and wanted to my camera easily accessible, my hands free, and no extra weight swinging around. It didn't work out as great as I hoped. On the backpack strap, the metal really dug into my shoulder over time and was painful. I should try the belt, but also seems like not the best place for hiking or scrambling
They sell a pad that is supposed to help with your issue: th-cam.com/video/T06NTnyo0Jo/w-d-xo.html
I have one of these and I find it invaluable for weddings and events, when working a two-camera scenario. One on a strap around my neck, the other (usually X-T2 with the XF56mm) sits on the Peak Design clip on my belt. I usually have it the other way up so the release button faces downwards, that way I can press it with the ring finger on my right hand as I slide the camera out. Smooooth, most of the time. Just need to remember not to smack the belt camera into the one hanging from your neck strap on the way up!
Oh, and make sure your belt's done up tightly enough to support the weight of the camera...
Omar.NEVER CHANGE...best video Award..thank you for your videos and your humor...
This is an old video by now, but you earned my sub just by showing you can mount it on a belt without the extra $20 belt mount they sell. Love the way you show it off and I’m excited to get mine soon!
I have this (for my x-e3). Here is how I usually set it up. I mount it on on a simple webbing sling (across the chest or around the neck). Pretty much like how a normal camera strap (or the peak design straps work). The great thing is that I can shoot with the strap attached (similar to bottom-mounted camera strap). But I can also unclip the camera while my webbing sling is still safely attached to my body - because it is a closed sling. (Did I explain this to an understandable level?)
This is practical - since the base-plate also works as an arca-swiss plate for my tripod. It is also comfortable when switching lenses - clipping the camera in while juggling lenses and in other situations when two free hands are needed.
A cheaper alternative is to pick up a webbing sling and attach two of the peak design "coin" thingies and clip one or both of them onto the camera. This also gives peace of heart - since if one of the attachments fail - the sling/camera will still be safe (The first version I made used small quick-clips - similar to the one used on the hand-strap at 9:00 above).
In a sense, my earlier mods gave me more peace of heart (even if one can lock the capture-clip button). And no, the capture clip is probably not worth the money (unless one have a wish list for a birthday).
It is functional though. I do not like to shoot with camera-strap. I do like to have a hand-strap. This way I can quickly attach the camera to the sling (with hand-strap mounted) - and take it off again equally fast.
(When I carry my Freitag message bag I attach the clip to the shoulder-strap to work similarly).
.
you are using fuji, sony and canon🤣🤣But wearing a Nikon Z T-Shirt🤣🤣
Glad you caught that. ;) . I was waiting.
Omar Gonzalez Photography Haha, since i was a Nikon Fan Boy 3years ago
I like it a bit higher on the strap - more comfy.
Just ordered this. Gonna use it on the belt, and they also have this hip pad thing that goes on your belt, and then you permanently attach the clip to that, instead of your belt.
Oh Damn I didn’t know they had that pad, that’s the reason I haven’t bought this clip yet. Gonna use it with mi sigma 150-600 sport
It’s called the ‘Pro Pad’ and it’s $19.99! But I believe it is the best way to go for mounting heavier rigs on a belt. 👍
That metal friction sound drove me crazy man. Thanks for reviewing 💯
Great and funny review! Also thank you for pointing out muscle memory and getting used to new equipment, I feel like so many people would just chalk that up as a bad design or possibly a negative.
I use one at every wedding, mounting my X-T3 with up to my 90mm on my belt. It is a bit expensive but it's super solid and I trust it. I also use it on my backpack but less frequently.
Dude, you are pure gold, showing the struggles and the good features, pure "everyday-people" review and this is what makes this quality. On the top of this you're funny :D
They also sell a support "pro pad" that you can put on your strap (or belt) and it better supports the camera when on your chest, it helps a lot with heavier setups. Also a chest strap on the backpack is kind of essential to help keep things feel balanced.
Looks like some weight/items in your backpack would stabilise the clip and make much easier to insert/remove camera from clip. As you say, a bit is muscle memory and I find it fine on backpack, but still have preference for belt (and use propad with belt clip mounting)
pro pad is poo poo, mount the clip diagonally on your belt and belt loop ;)
I came expecting a boring review, I stayed and subscribed for an entertaining person!
Will be watching more of your stuff, hope it's just as good :D
I have an older version of this thing and I really love it. I use it all the time on my belt. But I have the release button down. So I can release the cam one-handed via middle finger. Very convenient.
But you have to be aware of thick lenses. They may scratch on the screws.
Think you will love it once you get used to it.
The clip without the plate is cheaper, so well worth it. Once you have one plate, you can use it with all of their other products like the new tripod 👍🏻
I just recently picked up one of these. What I found is for back pack works far better if you have some stuff in the pack to weigh it down also to have a chest strap, those 2 things make a big difference. As far as putting it in and out, I put it on my left strap and hold the lens with ur left hand its much less awkward then trying to hold the grip. When removing, grab the lens with the left hand and use the right hand to push the button. I find this feels safest and easiest.. Also they show in the product video if ur using a small lens like a pancake put the camera vertical so it doesn't flop down like it was for you.. Hope this helps.. Cheers
Just got my two capture clips! one for backpack and one for my belt. Peak design got a "support" thing, that helps keeping the camera steady. PLEASE use this if you make a review, otherwise it won't fit.
If this was a commercial, not sure i'd be interested lol.
Edit: Also, I'm new and have been watching several videos lately, and you've been working on the Optech strap sponsorship for like months! Optech give this man a sponsorship already!!!
You are honestly one of the funniest people I have ever watched. 😂 Thanks so much for always keeping me entertained, you should have been a comedian.. 💯
I gotta say your sense of humour had me hooked 😂 Just ordered the clip after watching this
With one camera on a strap and the other on the capture clip - I have found this to be great way to handle event photography. I use the clip on the belt with the Pro Pad V2 and I use the Dual Plate V2 which does allow you use flat screwdriver.
This video gets my vote for the best video of the day.
Showing some of the learning curve of new products should be shown more often, good add. First time seeing one of your videos, looking forward to seeing more of them :)
You may have learned this by now, but in case you didn't, the included Peak Design allen wrench, which you detest having to use, actually has an attached key ring attachment on the end. So clever. It's always on my keyring just in case.
Used it last summer while hiking the GR20 (look it up, it's awesome) and I was sooo happy to have it. I could take quick shots, capturing small moments without having to take off my backpack and everything. I wouldn't use it on a citytrip though, way too vulnerable bumping through crowds and it's very consicuous.
I've had one for a while and love it with XT-20 on 10L PD bag across my chest.Can hike all day. Love your vids Omar, keep up the good work.
This clip has the most use during hikes with a backpack without easy camera access. Fixing on the backpack strap with ProPad support and the bigger bolts , balancing out on the opposite site at your back with tripod/water bottle work pretty good.
If you have a camera backpack with easy access you will not need this clip, but will not be comfortable on the long run for your back.
I have the clip, pad , leash and slide as well. Although these are not the best looking or most convenient for each situation, their safety/practical ratio is quite high to win the overall how to carry our gear game.
They used a hex key bolt to keep the mounting plate slim. It's also an arca swiss plate so you can go straight to your tripod. Just so you know, Omar, that button also turns to the side to lock the button. I didnt realize that and locked it by mistake and could not get my camera off of me.
I have one on my day pack. It works very well and definitely has become easier to use with time and usage. Other than the initial difficulties getting the camera off and on the clip I only had one gripe. With my Canon 60D with my 15-85 on it the front of the lens would dig into my chest as I walked and overall it just felt bulky. However, with the Fuji X-T3 and 16-80 I recently purchased those problems ceased and it's also much easier to operate the clip.
For your Sony, just load the camera on the capture sideways (so the grip extension is on top of the clip, the lens faces your body, and the LCD/back of the camera is facing your left shoulder. Another benefit of loading sideways is your arm movement is less hindered, and you can access the button more easily.
I wouldn't mind seeing a little more of the guitar stuff..
Been using this for a while and love it. While I don't use it ALL the time, it's absolutely a great convenient option. The only thing that is a bit of a bummer is that it blocks the battery/SD card door, but, then again, what doesn't block that thing? Also, I think it works really well with the peak design sling, not so much their 20L backpack (I'm fortunate enough to have both. The bag was a gift/bought the sling)
Bought one and had the same experience...
If you have a backpack with a chest strap then just place the camera between the strap and your chest. Perfect balance. Use a wrist strap to fasten it to your backpack. Used that trick on several mountains!
Holy cow! I am watching your video in Banff Canada because I saw some stranger hiking with her camera clipped to her bag so I googled it and knew this is from peak design! Wow what a coincidence 😂
Always entertaining and love your real-world, no BS reviews
Thanks for all the hard work you put into your videos mate. I thoroughly enjoy your work, perhaps it's the rampant dad humor that resonates? Keep it up! :)
Peak has said they prefer the allen wrench installation because a coin would not allow for sufficient torque to properly secure the plate to your camera. Their thinking is your camera will literally hang from this plate for extended periods of time, so they don't want to chance that the plate is not tight enough on the body.
I like the idea of the added tightening of the Allen wrench but I seem to be bad at having one at the worst possible time. Also if you follow Rich Baum on TH-cam, he's had problems in which the cinching actually separated the tripod thread from the body of the camera. And neither manufacturer covered the damage under warranty.
It's a nice gadget!! I bought mine used for like $40 and has taken a lot of damage over the years, almost all paint has gone out indeed xD. And still working with no issues. 3 years old many hikes and falls now and then and still working smoothly.
Hi Omar, great video. Live it!
I own the older version of this, basically the same but more bulky and with a thread at the bottom (to mount it at a tripod) I used it to carry a Canon G16 (compact camera) first, now I use the X-T20 with serious glass and some film SLR cameras with the FL/FD mount.
In my experience it is a great tool to carry your camera and I love using it every time I'm out on the streets.
On a backpack make sure it's on the right height and a chest strap helps to ensure shoulder movement but keep it on the left side. On the belt I mount it with the release button downwards because I always release it with my pinky. One handed of course. I guess we Germans are too efficient and probably need the other hand to catch the BIRD! Anyway, check out the straps from peak design. They are awesome as well. Keep it up!
Oh man, I love your videos so much, you’re hilarious and just so natural. It’s so relatable!! Amazing 🤩
Hi Omar !
Loved the review (especially the birds shots simulation ^^).
There's actually a third "secret" way to use the clip, that is not advertised by Peak Design : You can use it on a shoulder strap, and it becomes a sliding sling (then, you barely need to unclip your camera anymore, unless you wanna swap batteries or put it on a tripod). It's by very far my favorite way to use it. Only issue with this method is that for the clip to slide up and down the sling, you have to let a little space between the plates, so you can't completely tighten the screws, and in doing so, they sometimes get looser ocvertime, so make sure every few days to tighten the screws.
It would probably be pretty easy to 3D print an adapter which sandwiches in between the front and back plates with holes for attaching the strap. That way the screws wouldn't come loose as easily.
Im so glad I found your channel. And this review. If that clip were on my belt my pants would be around my ankles, my camera would break, and I would go to jail for indecent exposure
Come for the product review, stay because you remind me to be a happy person. Great video as always!
LOL, I appreciate you showing the learning curve for the clip, I feel like a lot of vids would leave that out :)
The Pro Pad makes a huge difference when carrying bigger setup. Definitely pick that up as well.
Great video Omar!
I bought one specifically for a 14day hike in the Himalayas but the clip hurts your shoulder after a while and more if you are carrying more than 10kg. I stopped using it during the 2nd day...
Literally the best video on TH-cam! 😂😂😂
Dude! you need your own merch. You are hilarious! Great job!
It's this kind of review that I've been searching before buying! Nice review!
Well…. First time viewer and had a great laugh watching this. Clicking the subscribe button for sure!! Thanks for the very authentic review. 😊
I love this clip. I use it often with a Canon T7i on a backpack. The key to using it with a back pack is to have a back pack with relatively thick straps along the lines of a hiking pack. I usually have it sitting just below my collar bone. To pull it out of the clip, I always use two hands but my right hand just hooks a couple of fingers under the grip while the thumb goes for the button while my left grabs the lens.
Your are crazy man. That's a good crazy though. Quick tip. The Peak Designs hex wrench has a ring attached. Just put that on your key ring and you never have to worry about not having it when you need it.
this dude is funny 😅
these are the exact trial and errors and silliness i would display at home when first buying a product
sub'd
I have the capture clip on their 10L sling. So it's ok. Especially with an 18-55mm.
Same
After you get used to it and attach it at the proper location on your pack strap (and with a proper pack) this clip is super convenient. That said I do use a 4:3 Olympus, that is a bit smaller than a full frame.
I believe that Peak Design during their latest Kickstarter campaign said that the reason why the camera plate has to be teightned with a hex key instead of just using a coin in a coin slot is specifically because of the Capture Clip. You are supposedly not able to teighten the camera plate securely enough to the camera when just using a coin slot. The sideways motion that the camera will experience when being attached to the Capture Clip on a backpack strap will eventually cause the camera plate to detach itself from the camera, and the result is that you will drop your precious camera. You are supposedly able to teighten the camera plate more securely to the camera when using the hex key to prevent the camera plate from coming loose from the camera, and you dropping your camera.
This is one of the funniest videos I've seen in a long time!
OMG you really made me laugh with this review! It's refreshing to see such a realistic perspective. Thank you!
I have used this for 3 years and lots hiking like 12mile trips and vacation travel like Europe and Disney usually D5300 with 18-200mm. You need a hiking style backpack with waist belt, sternum and good shoulder straps I use a osprey 30l with day hiking gear or travel gear. It is very solid and pretty easy to use.
It's totally worth it. I bought a knockoff version for $25. It works aok. But fit and finish of the Peak is VERY VERY good. It feels better, and therefore works better.
This video was informative and really funny, love you just being yourself.
Too good.
I’ve watched a couple of your videos in the past...I don’t remember you being this funny
Just got one. Can confirm that if your pack doesn't have a lot of weight on it with thicc straps, it'll be really *really* uncomfortable. For backpacking with one of those top-open packs (damn them to hell) it makes camera use a dream and you hardly notice it on your shoulder.
Thanks for the video and review. I've been looking to get this for backpacking. Also, nice "What Would You Say" lick there in the middle.
Best to put it just above the strap buckle. I used it on a 5 day hike in Wyoming a couple years ago with a Z6ii and kit lens. I loved it. Maybe a heavier pack allows it to work better. The button took a little getting used to.
I use on the right side of my backpack strap. I use my right thumb to push the button and left hand to lift out the camera. Comfortable and quick for me. I use a Cannon R5 with RF 24-105 lens for my general hiking/street set up
I have the previous version that I bought to use with a Pentax DSLR. Just got back from a trip to Italy and Portugal using the capture with my newly acquired X-T20. I've generally found that placing the clip low on a backpack strap so the camera hangs at your side almost near your waist is the best way to use it, especially given the small size of the X-T20. On most backpacks this ends up not being the padded part of the strap, but rather the nylon webbing that runs through the adjustment buckle. Hard to explain, but the positioning ends up kinda being like those gun side-holsters guys wear in detective movies under a coat jacket. I was able to walk through crowds without displaying the camera high up on my chest (and looking like a dork), and you can keep your arm over the camera to protect it if needed. Probably would be uncomfortable with a bigger camera but perfect for the X-T20 w/ 18-55. Ended up being a great solution to keep my hands free when not shooting - highly recommend you try that option! Weird Peak doesn't mention such a position in their extensive videos.
I should mention, I also have the Peak cuff wrist strap, and it was a great combo taking my X-T20 off the capture and securing the camera to the cuff.
I get so caught up laughing at your humor I have to remember to pay attention to all the great info you're sharing. Lol. Yeah, I think I'll stick with my simple shoulder strap for now. Thanks Omar!
Omar, your videos were funny always! Doesn't matter it helps me or not. Keep it coming.
You have missed few thing of this clip. I had two, and love it. The plate is also an ARCA type tripod quick release plate. So you could leave it on camera all time if you are using travel tripod. The push release button can turned to lock the button to preventing accidental release. There is belt mounting pad you can buy makes belt mounting easier and very comfortable. There is Pro version for bigger camera with bigger lens.
dude i never go out of my way to comment, but this video was hilarious. i was entertained the whole time. i wasnt scrolling through the comments trying to feed my addiction to information, i was just laughing at how funny you were. especially the bird part haha.
The best use I’ve used this for is amusement parks attached to my pack with a peak camera strap,(the small thin one) on my xt3. That way your streamlined with crowds and the camera isn’t hanging on a strap. And then when you need it, pop it off and you have the insurance of the camera still on your neck.
omg. funniest video i’ve seen in some time. informative too. lol
Omg I love your reviews! Lol!!! So much fun! Your humor is on point and not to mention informative.
Quite pricey. I wondered how it felt using it though, so thanks for the vid. The hiker/bird acting was hilarious btw hahaha great vid!
Finally great unboxing, funny and honest review. Really proud to be Your subscriber!
P.S.: You can buy coin-type screw and replace the one on the plate
Just stumbled on your channel and I'm subscribing because you're seriously funny. Plus you make good videos. Thanks for the great content!
It's awesome with the peak design everyday backpack, because it has more sturdy straps.
Dude I love your videos, had me laughing and learning!
Thanks for the review and the laughs! Great video Omar!
Love your videos Omar! You got me into the Fuji stuff! Own a X-T20 and been using the Capture clip for more than half a year and love it! I use it on a belt and on the side of a small bag (Think Tank Retro 5). Excellent for hiking and yes also for changing lenses. Whilst in nature it's always a hassle to change lenses. Expensive but good stuff.
Dude...first time I am watching one of your videos. You are funny. I enjoyed this. My black rapid strap decided to say goodbye at the last wedding and my camera dropped on the ground. No damage though. Still...I am done with Black Rapid straps. Have a Spider holster for my one camera...so this clip will do just fine for the left side. Thanks for sharing!