Thanks for posting this. The manual totally sucks when it comes to details. It doesn't mention anything about setting all switches to OFF, hitting the ENT key to get to the STOP display, and THEN moving the sticks around, and then finishing by hitting ENT one more time to get to the SUCCESS display. It pretty much says to get to the CALIB menu, move the sticks around, and then hit ENT, which just gets you to the STOP screen. Hitting ENT again will give you the ERROR display.
My throttle is of right for some reason, can you help ? The controller is same but throttle on right and stays in middle possition, how to make throttle on left like here ?
My walkera v450d03 spools up by itself and the devo 7 throttle percentage is reading higher than usual, rather than 2-3%, it now says 9% or up to 20% and the helicopter then starts to power the motor on. How can I fix this?
Hi Helipal, would you mind to make a video about tutorial how to setup devo7 on walkera runner 250 advance step by step for each menu ? Coz I find it really hard to setup. I dont familiar with all the devo7 menu. Thank you so much...
Is there any other rx board for the genuis cause those board suck really bad the battery wire pops of when the battery slip out from the tray when it flips3d
What kind of range can I expect from the Devo 6 radio system? If it makes a difference I will be using it in the U.S.A. I am considering purchasing your STORM Drone 6 GPS RTF version but before I do, this information is very important to me.
is there any video where you can put all the values out of the factory. I put by mistake and reset all values shifted and it was before I put someone help me or send me the parameters for the drone 4. thank you very much.
i think the controll sticks are to slippery . Would be nicer if you can make some adjustment to have a litle bit more resistans when you fly your heli .Because the heli gets to heavy turns when you just finger it soft :/
We can ship to Thailand. You can check the shipping cost at our website easily by adding items to the cart and choosing country in column "Shipping to" by then.
You're welcome! We knew it and that's why we made this video. ;)
Thanks for posting this. The manual totally sucks when it comes to details. It doesn't mention anything about setting all switches to OFF, hitting the ENT key to get to the STOP display, and THEN moving the sticks around, and then finishing by hitting ENT one more time to get to the SUCCESS display.
It pretty much says to get to the CALIB menu, move the sticks around, and then hit ENT, which just gets you to the STOP screen. Hitting ENT again will give you the ERROR display.
Can you make a video whit the values from factory? PIT &TRH????
THANX!
ciao amico mio,con la trasmittente walkera 2801 pro,posso usare le riceventi della devention?se e si quali?grazie tante!!!!
Thank you :)
For the battery, you can use some tape to help you. for the rx board, why you say it's bad? Some problems?
HeliPal help
My throttle is of right for some reason, can you help ? The controller is same but throttle on right and stays in middle possition, how to make throttle on left like here ?
Please contact info@helipal.com and our colleagues will be there to help you.
My walkera v450d03 spools up by itself and the devo 7 throttle percentage is reading higher than usual, rather than 2-3%, it now says 9% or up to 20% and the helicopter then starts to power the motor on. How can I fix this?
Hi Helipal, would you mind to make a video about tutorial how to setup devo7 on walkera runner 250 advance step by step for each menu ? Coz I find it really hard to setup. I dont familiar with all the devo7 menu. Thank you so much...
I thought I remembered how.
What if you did talhat and it says failed?
Great vid! Nice, simple and sweet. Now how to use the rest of it...
Can I use my Devo seven to fly my cheerson cx33 ?
Is there any other rx board for the genuis cause those board suck really bad the battery wire pops of when the battery slip out from the tray when it flips3d
grazie amico mio!!!
Sorry that you can only bind it with DEVO version receivers.
is it possible to calibrate the sensitivity of the throttle? not using the screws inside the tx i mean digitally on the program?
Bisogna calibrarlo con il Drone spento?
Also works for devo 7e
How do you calibrate the Devo 10
Hi there,
is there any way how to set 12% gain on throttle channel? Thanks
hello i am jerry i have a walkaera runner 250 drone but I don't understand how to operate like a professional drone can you teach me
Thanks!!!
What kind of range can I expect from the Devo 6 radio system? If it makes a difference I will be using it in the U.S.A. I am considering purchasing your STORM Drone 6 GPS RTF version but before I do, this information is very important to me.
What is this control shooting distance. To be used with LiPo 2600mAh 3s 1c
realy helpfull could you make more?
is there any video where you can put all the values out of the factory. I put by mistake and reset all values shifted and it was before I put someone help me or send me the parameters for the drone 4. thank you very much.
How can i calibrate the AUX2 ?
i think the controll sticks are to slippery . Would be nicer if you can make some adjustment to have a litle bit more resistans when you fly your heli .Because the heli gets to heavy turns when you just finger it soft :/
Danke👍👍👍👍👍🎮🎮🎮🎮🎮🎮🇩🇪🇩🇪🇩🇪🇩🇪
Hello I got a problem I can't comfigurar devon 7 2.4 GHz for the walkera qr x 350 rtf can somebody help me
boa noite alguém poder me ajuda como ativa a chaver gear no devo 7 para o gimbal G2
after that smash it in the street save yourself the headache ...It's a really poor radio
ขอภาษาไทยหน่อยค้าบ
We can ship to Thailand. You can check the shipping cost at our website easily by adding items to the cart and choosing country in column "Shipping to" by then.