Thanks for this CR. I have just replaced the servos on my Master CP with the metal gear servos and I have to set it up again. I will follow your guide and see how I go. Just waiting on my digital pitch gauge to arrive.
i just got a new blade sr 6 chan collective and i have a esky beltcp2 canopy i think its called like an f3 full cabin canopy i was wondering if u think the blade sr will work in the esky cabin?
Hi Nice video. Question i have the same new servos are coming. I was looking for the answer to my that I think it is a problem. I flew on hold switch on 0, which does when you move stick it stays in the position for a little and then go back, any movement does it. then when it is level gyro works when I move the heli. when i switch to 1 stick moves servos and they go back to middle position but gyro when I move heli doesn't work. Is it normal like this. I couldn't see your switch if it was 0or1
Hi Roy, I a new into this hobby, I bought a master cp and I'm a beginner, and I tried to fly it, and I was not able to lift it, now as you can imagine, I bought a new servos (metal) and I did install them, but I don't know, if I did it right, this is my first time, than I'm trying to fix my heli, can you teach me how to install my servos correctly? please, and I'm thinking than I have to do the same with my Swashplate. I will appreciate it if you have the time to help me. or if u know website
hi CRUISE ROY just wondering if you can give me some tips about this heli,, as this is my number 3 master cp walkera and i have not be able to fly yet no even to take off once I HAVE A DEVO 7 ( DEVENTION) ORIGINAL RC 1.-- i have not be ble to take off yet why the helicopter stays in ground with full throttle up ( full revolution of blades ) does not take off.. and sometimes goes for one side and blades hiting the ground badly…why s that? i checked the setting and seems to be ok unless i am setting it up wrongly ,,what setting should i check and where to adjust according to your experience ? 2.- i am only trying to fly in a normal mode .. ( NO 3D FLY) WHERE SHOULD I MAKE SURE THE BOTTON IS IN THE RIGHT POSITION? IS THE RIGHT TOP THAT NEEDS TO BE ALL THE WAY BACK? ITS BEEN A big frustration for me if you could help me with theses tips maybe my problem is solve,, at least wanna be able to fly as a normal heli,, like you i have expericnce flying 4 channel,,,,, i know is different but it cant be soo dificult if i could make it just to take off would be fantastic i see your video taking off soooo smooth and nice … sorry for my long comment but i woud like to get help mate… i appreciated taking your time to make this video is great ,,thanks for your help.. regards javier
Hi, Cruz Roy: I don´t understand clearly what happened to your CP, can you widen a little¿? DO you think a beginner can do those resettings to the heli?
I have a questing. I got a master cp like that one, but it does not want to spool up the blades. Servos work just fine, but neither main rotor nor the tail spools up. Any idea whats wrong? ESC dead? The heli is brand new.
Hey man...I hope you're still around. Any idea why my motor won't spin? I can get it to connect and I'm able to move the blades (pitch, tilt, etc) but the motor won't spin at all. I don't believe the motor is fried as it will spin if I put a battery on it, but it won't spin when I try to take off.
I recently purchased this helicopter and im having some issues, the tail rotor is not spinning at all, never flown it once other than just spinning the main rotor while on the ground Any idea's on whats wrong with it? can it be fixed? or do i need to buy myself a new tail rotor motor?
My Master CP doesn't work right... the throttle is on 50% and when i maxed the aileron nothing happens but only the throttle propeller will only spin but the main propeller is not spinning... how can i fix this? is this the settings or my heli is broken?
Hello Cruz I'm new at RC heli flying, however I have been flying a 4Ch heli and have taken RC simulation training, thought I would up grade to a 6ch. Just got my walkera master CP went out for the first test flight and all she wanted to do is spin the tail in circles, took a hard landing and wiped out the swashplate, any suggestions why this would happen? I appreciate any help I can get. concerned and broken in Ohio Thanks.
Hey CR, Theoretically ,if some noobie were to box up a Master CP and send it to you for adjustment and transmitter settings, would it be worthwhile? :D There seems to be a number of them out there.
Russell. you may have a bent feathering shaft. Cruze Roy, Thanks you vids got me flying a master cp and a Axe CP 2.4 If any one needs help with an Axe CP 2.4 I can help. will make a video this weekend on the Axe CP and how to get it to fly fantastic
Just got one didn't get to fly it it tip over and strip the servo not happy with the cheap servo that comes with the helicopter now I have to buy the metal servo to get the helicopter to fly
buy a better balance charger, i charge the lipos in about 25 mins.....and get 8 minutes fly time.....havent had trouble..........just check how hot the battery gets........if it dont get hot, its not hurting it........but thats how i feel
Thank you for your video, had to put in new metal servo but could not get it of the ground until i watched your video.A big thank you for you effort.
Awesome video. Great to understand how the settings work and what they do, then anyone can set them the way they want.
Thanks for this CR. I have just replaced the servos on my Master CP with the metal gear servos and I have to set it up again. I will follow your guide and see how I go. Just waiting on my digital pitch gauge to arrive.
Thankyou for your advice, u have probably saved my Master CP's life!!
I've got 3 metal servos to when I took a hard landing :(
YEP THIS IS A GREAT WAY TO SAVE YOURSELF TIME AND A HELI THAKS CRUZROY . I HAVE TWO MCP"S AND YOUR SETTINGS MADE THEM FLY THANKS
i just got a new blade sr 6 chan collective and i have a esky beltcp2 canopy i think its called like an f3 full cabin canopy i was wondering if u think the blade sr will work in the esky cabin?
depends on batteries, i got some hobbyking 1050 3s, 40c, they work great, the factory walkera one went dead after 3 charges....so you might be right
Thank you! Great video for a beginner like me!:)
Thanks for the video really informative. Just stripped 3 original servos. Order metal geared ones from China.
Hi Nice video. Question i have the same new servos are coming. I was looking for the answer to my that I think it is a problem. I flew on hold switch on 0, which does when you move stick it stays in the position for a little and then go back, any movement does it. then when it is level gyro works when I move the heli. when i switch to 1 stick moves servos and they go back to middle position but gyro when I move heli doesn't work. Is it normal like this. I couldn't see your switch if it was 0or1
Nice tips! Wich pitch gauge are you using?
what throws the battery you can put outside the valkera
Hey Roy on Xheli.com they have a video on correcting the mid stick issue.
Not sure if you were aware of this or not.
Hi Roy, I a new into this hobby, I bought a master cp and I'm a beginner, and I tried to fly it, and I was not able to lift it, now as you can imagine, I bought a new servos (metal) and I did install them, but I don't know, if I did it right, this is my first time, than I'm trying to fix my heli, can you teach me how to install my servos correctly? please, and I'm thinking than I have to do the same with my Swashplate. I will appreciate it if you have the time to help me. or if u know website
which better baterry charger you can advice to me ? Tx ! btw,great tips ...!
hi CRUISE ROY just wondering if you can give me some tips about this heli,, as this is my number 3 master cp walkera and i have not be able to fly yet no even to take off once
I HAVE A DEVO 7 ( DEVENTION) ORIGINAL RC
1.-- i have not be ble to take off yet why the helicopter stays in ground with full throttle up ( full revolution of blades ) does not take off.. and sometimes goes for one side and blades hiting the ground badly…why s that? i checked the setting and seems to be ok unless i am setting it up wrongly ,,what setting should i check and where to adjust according to your experience ?
2.- i am only trying to fly in a normal mode .. ( NO 3D FLY) WHERE SHOULD I MAKE SURE THE BOTTON IS IN THE RIGHT POSITION? IS THE RIGHT TOP THAT NEEDS TO BE ALL THE WAY BACK?
ITS BEEN A big frustration for me if you could help me with theses tips maybe my problem is solve,, at least wanna be able to fly as a normal heli,, like you i have expericnce flying 4 channel,,,,, i know is different but it cant be soo dificult if i could make it just to take off would be fantastic
i see your video taking off soooo smooth and nice … sorry for my long comment but i woud like to get help mate…
i appreciated taking your time to make this video is great ,,thanks for your help..
regards
javier
Hi, Cruz Roy: I don´t understand clearly what happened to your CP, can you widen a little¿? DO you think a beginner can do those resettings to the heli?
I have a questing. I got a master cp like that one, but it does not want to spool up the blades. Servos work just fine, but neither main rotor nor the tail spools up. Any idea whats wrong? ESC dead? The heli is brand new.
Hi CR I have a bit of tail wag which gain or gs on the receiver do I ajust? There is 3?
Hey man...I hope you're still around. Any idea why my motor won't spin? I can get it to connect and I'm able to move the blades (pitch, tilt, etc) but the motor won't spin at all. I don't believe the motor is fried as it will spin if I put a battery on it, but it won't spin when I try to take off.
is it safe to charge the stock battery at 2C (2 amps)? the stock charger charge the battery only at 0.8 amps for maybe 2-3 hours.
hi i am plan to buy one i am only good 4 chanel v911 and v977 but no 3d is this hard to fly thanks
hey got a question.. I just got a master cp but it came with a devo 7 it says mini cp on the remote ever heard of that??
I recently purchased this helicopter and im having some issues, the tail rotor is not spinning at all, never flown it once other than just spinning the main rotor while on the ground
Any idea's on whats wrong with it? can it be fixed? or do i need to buy myself a new tail rotor motor?
Never mind i figured it out, for some reason the connector was not connected properly
25 mins? is that safe? i have my turnigy accucell 6 but im hesitant to charge it at higher amps.
My Master CP doesn't work right... the throttle is on 50% and when i maxed the aileron nothing happens but only the throttle propeller will only spin but the main propeller is not spinning... how can i fix this? is this the settings or my heli is broken?
is this MCP still a nice chopper after one year?
yea.. mine stripped all three right away.. pretty much you need to rebuild the entire thing.. decent hell but it needs work to fly right..
Hi please tell price
Hello Cruz I'm new at RC heli flying, however I have been flying a 4Ch heli and have taken RC simulation training, thought I would up grade to a 6ch. Just got my walkera master CP went out for the first test flight and all she wanted to do is spin the tail in circles, took a hard landing and wiped out the swashplate, any suggestions why this would happen? I appreciate any help I can get. concerned and broken in Ohio Thanks.
Hey CR, Theoretically ,if some noobie were to box up a Master CP and send it to you for adjustment and transmitter settings,
would it be worthwhile? :D There seems to be a number of them out there.
Russell. you may have a bent feathering shaft.
Cruze Roy, Thanks you vids got me flying a master cp and a Axe CP 2.4
If any one needs help with an Axe CP 2.4 I can help. will make a video this weekend on the Axe CP and how to get it to fly fantastic
Just got one didn't get to fly it it tip over and strip the servo not happy with the cheap servo that comes with the helicopter now I have to buy the metal servo to get the helicopter to fly
nice job!..but just one thing..you NEVER level ur wash during setup with the subtrims....you adust the links..
buy a better balance charger, i charge the lipos in about 25 mins.....and get 8 minutes fly time.....havent had trouble..........just check how hot the battery gets........if it dont get hot, its not hurting it........but thats how i feel
You forget to said, you have to make a modification to the heli ,to work that batterie
I dont have master cp...😥
ไครก็ใด้ช่วยแปลไทยหน่อยคับผม
I am trying to get answer from different sources maybe you can help.
Maybe check my videos
thank you