Walkera Devo 7 Controller - Configuration Settings For Runner 250 Pro
ฝัง
- เผยแพร่เมื่อ 27 พ.ย. 2024
- Hey Guy's,
Thanks For Dropping By "The Art Of UAV"
Today I Wanted To Set-Up The Configuration For The "Walkera Devo 7 Controller". I'm Hoping This Video Gets You Out Flying Quicker With The Runner 250 Pro.
Next I Will Be Upgrading Some Parts On The Runner 250 Pro.
Walker Runner 250 Pro/Devo 7 Controller - goo.gl/Vf4kT1
MG Power 11.1V 1100mAh Lipo Battery For Walkera DEVO 7 - goo.gl/dHGzF3
Walkera Original Devo 7 Transmitter Neck Strap - goo.gl/UhzLVC
RECOMMENDED UPGRADES:
-Neck Strap For Me Confort & Control
-Upgrade Battery To A 11.1v 1100mah Lipo
Video Filmed On: GoPro Session 5
Music By: Actual Fame
Track: Miss You
Please Feel Free To Drop A Comment Below If You Have Any Questions.
Happy Flying & Remember To Be Safe!
Peace
The Art Of UAV
X
"If you panic" Yep, I do that a lot. Good video, especially if you have been messing around with the settings and need to go back to a safe default. Thank you. I bought a Runner 250 a few years ago before the Pro came out. I added my own GPS, volt meters and buzzers and a tonne of other stuff, cheap alternative to a GoPro, I've since taken it all of, the 40 second flight time kinda spoiled it. All that stuff belongs on a fixed wing, for the time we get to fly on a small UAV, we are better off with buzzer if it gets lost and a timer so we no when the battery is going to get low. I sincerely appreciate the positive comments on here, many on the net just slaughter the runner but like the rest of you, I never bought it to race, I bought it to learn to fly. DJI drones are good, button to take off, button to come home, button to land. They can stick their APP up their APP. Does anyone have a link to where I can learn more about the abbreviations on the controller, I can set them, but I've no idea what they mean. Before I go, the Runcam Split 2, 23g not a 90g GoPay a fortune. Brilliant quality and if you damage the lens when you land like me, £15. Less panic, more fun :-) Also, I use Turnigy 2200ma batteries, I'm only getting 10minutes of flight at best yet the quad is stripped down to nothing but the basics, I've even cut chunks out the frame. Higher amps, heavier battery, Should I stick with the original battery ? I've never flown with it. Thank you!!
Thanks for all your effort my friend!!!! You have saved me more than once, absolutely making my day after being stumped for days! Peace be with you my brother! Larry G. Shakopee, Minnesota USA
Thanks for taking the time to post this video big help
Leona Sampson No problem @ All Leona! Glad I could help :) Peace A x
Gia cua dove 7 la bao nhieu
hey mate, would be good to see if you can find out how to make the runner 250pro programmed to give more roll and pitch so as to be able to flip. After all there is a USB port. is there a software we can use?
theJourneyofPurpose TJOP Hey dude, thanks for the question. Right so I know that the pro runs on a software called multiwii. It's absolutely shocking unlike betaflight and cleanflight. I'm happy to give you the link for the download but you will need a masters in understanding it lol. code.google.com/archive/p/multiwii/ I would say might be worth downloading 2.4 and seeing what happens. I know once you can connect your quad you can amend settings to give you more roll. I'm looking into other software that will work better or if I can transfer to betaflight. If I can work this out I will do a video. Hope this helps and have an epic weekend. Peace A x
thanks mate, ill have a look into it. Will subscribe and check out whether you can get some tweaking going, would love to be able to do some flips on the runner pro but apparently this drone isn't for that :(
theJourneyofPurpose TJOP Yeah this like hybrid quad I think the gps has a lot to answer for with this. Saying that it is possible to flip just need to tweaks. Yeah keep an eye out on my videos and if I get time I will get something posted on tuning. Peace A x
I would like to figure out why the motors turns off when throttle is down, no idle
Is there a way to set altitude hold on the Walkera Pro? As in GPS mode it holds in X & Y space but will drift in Z (altitude) where as I just want it to hold there. Also is there a hack to get the Devo 7 Throttle to self center? Thanks in advance!
For "SWITC ON" option, what is the difference between ALLON & NORM?
Hi man, here from Chile, i've just bought my NEW 250 advance and I cant maje it run, I dont know what wrong thing im doing, I dont know were can I send and I think its just a bad configuración it has, if you can help it could be something great for me, thank yoy
I received a drone w/a devo 7 (devention) controller. When i turn on the controller the screen reads THSTk, and beeps. I cannot seem to get out of this screen. Any suggestions?
Hi there. I made a mistake trying to reset my DEVO7 transmitter. Didn´t was correct and now the screen shows only FM SW and beeping. Clickin EXT or ENT makes no difference. Can you help me, please? Thankx
Hi, I am completely new to this and your controller set up is great. I have a runner 250 with camera and GPS. I can't figure out how I get the camera to work in the controller screen ? Can you help this newbie
stefan8271 Thanks for the comment but unfortunately I don't have a screen controller. Could you send me the model that your using and I will look into this for you. Peace A x
It looks like the same model as yours but on page 15 of the guide it shows how to put the screen into video setting but I can work it out
Runner 250 guide V1.3
Devo 7 2.4 ghz
Can't work it out not can lol
great video.... bout to watch what else you have.... just ordered my 250 pro, hope it gets here in the next week or two. And Lookin forward to flying and learning as I go. Hope you dont mind, but if I have questions, could I reach out ???
Saying hello from Texas, USA here !!
Six22278 Yo Six, thank you for the great comment! I hope it reaches you soon so you can get out flying. I'm new to the TH-cam thing only been at it a month but I have a lot more videos to come on the pro so make sure you keep watching. I'm due to do a video on the walkera goggle 4's and trying to get a video together on software configurations for the pro. Always here to help anyway so feel free to ask as many questions as you like. I would personally watch my upgrade video and make sure to change your stock props that come with it such a let down. Anyway hope you've had a great weekend and a big high five from the UK. Peace A x
The Art Of UAV just saw ur video on the upgrades and about to order the props now !!! btw....wife and I freakin love ur accent. Keep up the good work, and ill be watching out for your new vids !!! Thanks again kind sir !!
Six22278 Yeah dude I would recommend treating yourself to some new props and emax bolts. You will get so much more power from your quad by doing just this. Also just little tip do not power up your pro without the mushroom antenna attached as you will fry your boards. Hahah thanks :) glad you guys are enjoying the videos and accent. Update me once your flying and let me know how your getting on. Peace A x
The Art Of UAV Will do !!!!! Ive watched hours of the do's and don'ts, Hell, I think I can not only build one now but maybe design it too with as much info my old brain has absorbed hahah. This is a hobby O wanted to get into when I was a kid many moons ago, but couldnt.... but now I can. very blessed my Polish wife allows me to do this. And btw... I just ordered the props and nut bolts !!!! Trying to do things right.... Thanks again, we' ll talk soon papa. Ciao !!!
So i copied all the settings the throttle is still on the wrong side. Also i plug my drone in and it refuses to fly i get the back led to go solid meaning it is reading my transciever right? But then i cant unlock it or anything? Idek ive read manual front to back to no avail
Absolutely brilliant dude, thanks for this video. Made setting up my TX take as much time as the is vid! For some reason the tx with my RTF Advance came with no settings on it at all and trying to setup via the manual was a head scratcher!
Any chance you have done/ would do a vid on how to lower max power settings via the tx for beginner flyer?
Struggling to make sense of the usual forum how to guides and can't find a vid!
I've just transitioned from training quad and finding the jump a bit on the harsh side still!
I just started flying drones however in one months time I ended up ordering seven of them it has become a quick hobby of mine now it’s a problem a somehow or another the first drone I got The controller to the drone stopped working I took it apart and that was the end of that I bought me a Weiland Devo seven hopefully that was the answer to having one controller for my drones altogether I’m not sure if I did the right thing or not the cheap drone I’m trying to fly with the Devo 7 is a small $20 HJHRC how do I make this happen from A to Z
I'm back, at the beginning of your video you mentioned triggering a buzzer via the AUX2 (left/front facing)switch, I use it for a servo that drops a payload, a parachute or my pigeon 7 (similar to Falcon 9) I cannot find a servo triggered alarm. I've had lost signal, low Batt alarms. I would like a buzzer that I can trigger with a flick of a switch. Help! Thank you!!
Hi and thanks for a good informative video.
You mention at 1:54 that you might configure the hold switch for arming/disarming. I would very much like to know how to do that (I would prefer the gear switch though)
Could you do a video on how to configure one of the switches as a arm/disarm switch?
I have lost some props due to the runner 250 PRO's motors failing to stop in the event of a crash (I guess due to the fact that the props are always spinning when the 250 PRO is armed)
Very informative video. really liked it. I'm new to racing drones. been pretty much flying video drones for example the MJX Bugs 2W. I just got the Walkera Runner 250R. Can you possibly do a video of how to launch and land? I flew it for the first time the other day and I couldn't get it to land properly and lock the motors. Anything would help...Thank you and keep up the videos. Like I said....very informative
I bought this kit for $100. But when i put throttle stick down it shuts of drone and power is lost, not good. Any ideas
hi I have a question for u I have a Walkera rodeo mine fpv race drone with the Devo 7 transmitter it's a bnf when I got it n I hit some kind of button on the tx n it's still beeping 😢 n I hit the reset button on the drone still beeping 😢 n I have a bind plug fo it to do I put the bind plug in the sbus plug to re binding it to drone ..n I don't have a computer to reflash the firmware on it ?
Hi
Would it b possible to bind this devo 7 with a eachine novice 1 ??
Can I please help thank you
hi mate, just wondering if the devo 7 is set to auto leveling or acro mode out of the box?
as a new flyer auto leveling mode seems to be the way to start i think.
Anyone know why my runner 250 pro propellors spin when I arm the quad are they supposed to spin when I enable arm ??? How can I stop it ?
Hi mate I’ve got the advantage and the pro on the advantage when you press the throttle if that was up straightaway bit with the pro it doesn’t is this normal Who is there like a beginners mode and a excellent mode do u no? many thanks
I have a storm that was rtf I crashed and my cc3d got hurt I ordered another from banggood do I have to download everything or will it come rtf
Do you know how to use the DEVO 10 to control Runner 250 PRO?
I can bind the runner with the Devo 10 but the channel is totally mismatched. Please advise any suggestion.
yuet-keung Yau Hey, after doing some research you should be able to fly your quadcopter on the devo 10, if your needing setting I would need to look further. Peace A x
Hi, Good to know that I could make use of my Devo 10 to bind with my Runner 250PRO.
Please advise the setting or configuration file
Thanks
Hey, I've had a good look around and forums say you can use the devo 10 as a controller with the pro, Unfortunately I can not find videos on how to do this. I wold be able to do it but I don't have this model controller. Sorry I can't help you more but I would suggest signing up to walker's forum and asking for help. Peace A X
thank you
Hi
I think I can bind and control the drone but some of channels are need to configure. Do you know how to map Ch8 to AUX 3 which is FMOD and Ch7 to AUX 4 which is GEAR.
Please help.
Thanks
Hi can you tell me the lipo for the radio please
How do i adjust yhe sticks so throttle and yaw is in the left stick ?
How do I change the arming/diarm to a switch
will this work on my qx350. the manual is different to your settings in the instructions
Gary O'Hare Hey, unfortunately I don't think it will work! Does your quadcopter have gps? Peace A x
The Art Of UAV yes gps .its the walkera qr x 350.
Gary O'Hare I've just looked into the settings for your quadcopter, most of them are the same as this video that I made for the runner 250 but I'm not 100% sure on yours as I don't have your model to test after configuration. Sorry I can't help you more. Peace A x
Al just try it out tomorrow if the winds dropped. But Thanks for your reply. If it's not right can you help me please buddy. Top lad anyways on helping ppl with your videos. Top marks :)
Gary O'Hare thanks for the kind comment :) course I can help, test the setting tomorrow and make any notes of what it shouldn't be doing and report to me then I will look into seeing what I can do. Just make sure you read up on failsafe incase you need to drop the quad in an emergency. Peace A x
hey bro ..are these setting good for a beginner
Will Beathia Yeah dude! Thanks for the question and yep completely safe for a beginner. Peace A x
The Art Of UAV How to switch to arcade mode ?
How do you activate the fail safe mode?
Prophet/steve-oRazor Hey Prophet, Thanks for your question. Once you have set up the failsafe settings in the video all you the have to do is turn off the controller with the off switch. That will kill motors and drop the quad while still alarming the buzzers. If you don't set the safe mode to safe it will be on hold mode and the quad will keep on flying if your controller dies or you turn is off. Hope this help. Peace A
The Art Of UAV ahh see I've heard of another way of using a fail safe from helicopter guys using the throttle hold switch to cut power to motors would this also work as a secondary means of fail safe?
Thanks for getting back to me tho much appreciated!
Prophet/steve-oRazor yes you can use the down and right corner on the throttle but I really wouldn't recommend this as it's tricky if your panicking. Also I recommend connecting the quad to you pc and setting the gear switch to being an arm and disarm switch. Me mainly I just cut the power to controller. Have you received your pro yet? Peace A
sweet. after months of a bad battery and constant beeps, im back, binded and maxed settings. thx!! imma try to bind it with the devo12e fire maybe, but dont wanna press my luck
will this work on the walkera 250 runner basic?
Eterio Cruz Hey mate, I can confirm that these settings will work on the runner 250 basic. Hope this helps :) have good weekend and thanks for the comment! Peace A x
The Art Of UAV I did these settings can't get my d/r switch to work wanna add expo / curve
Eterio Cruz Nothing will automatically be set to the D/R switch you would have to download multiwii software for you quad to be able to assign things to switches. With amend to the throttle curve you will have to go into functions on your controller to adjust this but I would make a back up copy of your controller settings on another program file. Peace A x
The Art Of UAV I had it setup that way without using multiwii my dumbass decided to reset the controller with out making a backup anyway I can get the original settings for my devo 7 and thanks bro really appreciate it and great video by the way:)
Eterio Cruz haha no way I did exactly the same thing when I got mine should have backed it up. Anyway hope you get your controller setup ok dude. Thanks for the kind comments till next time. Peace A x
EEEEE!!! Thanks!!!
i have only Angle mode on my Devo 7 (runner 250 pro) why pls help me
Hey man, just subscribed to your page. I hope you can help. I cant get my devo 7 to bind with my furious 215. Had to replace the motors and think I may have reset the system somehow by pressing the little white button on the side of the receiver. Now it just beeps when I connect the battery and the red led flashes slowly. From what I can gather, this means that its not binding. I'm so fed up and I know its most likely a simple fix. I may just put my own receiver in, but not sure I can even do that. Would appreciate any help you could provide. like I said, at this point, I'm ready to smash this thing into a 400$ pile of scrap!!!
Hey Dude, Thanks for the subscribing :) right lets see if we can get this working for you! Sounds like we need to do a fixed ID, try this - Plug lipo into quad - turn controller on - find model tab on main screen - enter that menu and scroll down to fix ID - turn this to on - code will show up - then push down to run and click yes - when stops turn controller off and then back on this should bind the quadcopter. Peace A x
Thanks so much for your help. Its so hard to find anyone who knows how to work on this quad, so I tried following you directions several times but still no luck. Any other ideas?? Can I put my own receiver into this drone. It says that you can, but doesn't tell you how to do it. I would really rather avoid having to do this since this is the only walkera I on and paid a good amount for tis transmitter. Thanks man.
How to switch to arcade mode ?
Thank"s
I need some help about the drone
Bro mine is stuck in throttle hold....
Love your video explanation BUT way too fast !
Cannot even begin to understand all because you are way too fast, some (older folks like me) we are not born with all of that technology and we don't get it as quickly as other younger ones !
dew try it again
En français
You are so fast. Dislike 👎
A video *soooo poorly* produced, it *margins* on the *offensive*
There desperately *needs* to be a TH-cam video on how to *compose* a *professional productive video* that is coherent!
Instead of these cheap and totally offensive *"Mass RAMBLING TH-cam productions"* we are perpetually bombarded with?
Can someone teach these "Ungrounded and unlearned *Denisovens"* how to make a coherent video while broadcasting on TH-cam please?
There need's to be a video on how and what to comment in regards to the subject matter at hand and that there are millions of videos at your disposal for FREE. This site is not called YouMovieProducerTube, or YouMasterEditorTube, it's just called Y•O•U••T•U•B•E•!!!! The "You" stands for all of us out here in internet land, novice or expert, not you, Shem Su Hor the magnificent film maker.
Are we supposed to be impressed with your screen name? Does using a name from an Egyptian astrological fairy tale make you "enlightened"? Or are you actually a follower of Horus? You obviously believe in the fairy tale of the old bearded dude that lives in the clouds and has a zombie son, JC. What does the old dude think of your other videos, funny that you're giving someone crap for the way they present their video, and on your page you have a playlist of a guy that's a Glenn Beck/Breitbart wannabe, a Christian playlist and then a playlist with this video and other like it!! THE HORROR!!
th-cam.com/video/XtYHVJXpKgA/w-d-xo.html
hi I have a question for u I have a Walkera rodeo 110 mini fpv race drone with the Devo 7 transmitter n it's a bnf when I got it n I hit some kind of button on the tx n the Drone is still beeping 😢 n I hit the reset button on the drone still beeping 😢 n I have a bind plug fo it to do I put it in the sbus plug to re binding it to the Drone to re binding it?