If there are burnt terminals should it be enough to just strip the wires further back, put new crimps on and reattach it to a new interlock? I did this but I'm still getting the DE error so I'm wondering if the wires themselves are now bad (they looked a little oxidized), or if something else fried when the interlock terminals did.
the next thing I would try is changing the door into lock if you have not done so already. if you have changed the door in locked and you may have a problem with the printed circuit board. Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
I tried this fix but my machine still shows a DE error any other ideas would be greatly appreciated as I'm not sure if the new part is faulty or whether to check something else , iv been told it could be the PCB but all programs seems to appear in selection , though i don't hear the click for lock when run, driving me mad someone please help
I e changed the interlock but am still getting the dE error, so I suspect it’s the latch mechanism you mentioned at the start. Any tips or other videos on how to check and fix this? I do have some play in the hinge, but the door does lock into position. I’ve tried moving around the lock and hinge position a bit but no luck. Seems like there are a few others that have the same issue. Any help would be appreciated
Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well. I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Can you do us a favour and please share this video on your timeline Facebook twitter etc . This will help other people who can’t get engineers out to help them. th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t facebook.com/how.to.repair.appliances/ Stay safe
if you have replaced the door switch you are still getting a DE error code I would be testing the wires going to the circuit board if these are in good condition then this fault is pointing towards a circuit board failure
Hello and thank you for so much useful videos. I have probelm that mine connector is burnt, and now when I bought new one door lock, I can not do anything with machine becouse I don't know how to connect those wires to new lock. On dor loch there is numbers 3, 4 and 5, and I have three wires (white, blue and thin black). Can you help me and say whitch number to connect with whitch colour? Model of mine machine is P1481gw/xeg
Can you do us a favour and please share this video on your timeline. This will help other people who can’t get engineers out to help them. th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t Stay safe
Iam Glad we could help you. My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008 If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel th-cam.com/users/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. TH-cam. th-cam.com/users/Apart4u Facebook. facebook.com/how.to.repair.appliances
Thanks mate. Excellent video, still helping people today. Made the interlock replacement a quick 20 minute, hassle-free job! 👍
Glad it helped @MrPhantom453 please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
I just fixed my washing machine and it's working perfectly. Thanks a Lot from Denmark for saving my day and Wallet.
If there are burnt terminals should it be enough to just strip the wires further back, put new crimps on and reattach it to a new interlock? I did this but I'm still getting the DE error so I'm wondering if the wires themselves are now bad (they looked a little oxidized), or if something else fried when the interlock terminals did.
the next thing I would try is changing the door into lock if you have not done so already. if you have changed the door in locked and you may have a problem with the printed circuit board. Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
I tried this fix but my machine still shows a DE error any other ideas would be greatly appreciated as I'm not sure if the new part is faulty or whether to check something else , iv been told it could be the PCB but all programs seems to appear in selection , though i don't hear the click for lock when run, driving me mad someone please help
hello, how were you able to fix this? I’m facing the same problem
I e changed the interlock but am still getting the dE error, so I suspect it’s the latch mechanism you mentioned at the start. Any tips or other videos on how to check and fix this?
I do have some play in the hinge, but the door does lock into position. I’ve tried moving around the lock and hinge position a bit but no luck. Seems like there are a few others that have the same issue.
Any help would be appreciated
Hi, I have a fully automatic top load machine. any advice on how to replace the interlock for it
may i ask how do we unlock the door when it display hot at all the time
Hi.I have de error code flashing I’ve changed the door interlock but still have the de flashing.your advice would be much appreciate.thank you Mick.
Same problem w/ my samsung
How do you open the door when it's still locked and showing the code? Any help is very much appreciated 😊
You just need to switch off power completely and wait 5mn, door will open
Please help me. My samsung top Louder had a erro de. al the ather things is working. I cant se anething whrong by door. for me the lid is close
Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well.
I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Hi
I replaced the door Lock but still getting DE , can the problem be in mother Board? Thanks
Can you do us a favour and please share this video on your timeline Facebook twitter etc .
This will help other people who can’t get engineers out to help them.
th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t
facebook.com/how.to.repair.appliances/
Stay safe
hello, were you able to fix it? I’m still facing the same problem
How to change the PTC connector which is completely burnt.. Thanks for the valuable information
hello i have a problem with my washing machine samsung lights a red padlock and does nothing someone knows what could be wrong thanks
Already change door switch. But still Appear DE code. What should i do next.
if you have replaced the door switch you are still getting a DE error code I would be testing the wires going to the circuit board if these are in good condition then this fault is pointing towards a circuit board failure
Hie where can I buy interlock in South Africa
Thanks from Algeria
My samsung j1253 washer is showing an error code 6E its not listed in the user manual
Top of my head I think this is a communication error. It was not listed in the manual I was working on
Hello and thank you for so much useful videos.
I have probelm that mine connector is burnt, and now when I bought new one door lock, I can not do anything with machine becouse I don't know how to connect those wires to new lock. On dor loch there is numbers 3, 4 and 5, and I have three wires (white, blue and thin black). Can you help me and say whitch number to connect with whitch colour? Model of mine machine is P1481gw/xeg
It also works with WW80H7400 ?
Hi. I have a GE washing machine. and when u turn it on the the door won't close and the timer keep going down in second.
check the door interlock as i maybe faulty
how-2-repair.com
hello i have a problem with my washing machine samsung lights a red padlock and does nothing anyone knows what can be enjoyable
Thank you very much! That was helpful
Hi i have water problem in my washing machine is not washing simoly water is going same this machine model number 5.5kg
mine was burned when I opened it so.. now what
Very good video message Thanks
Can you do us a favour and please share this video on your timeline.
This will help other people who can’t get engineers out to help them.
th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t
Stay safe
Hi, even with a new door lock I have a DE error :/
Same case for me. Did you fix the issue?
awesome,thanks guys worked for me
Washer stuck on a wash mode
thank you u helped me so much!
Never showed you how to open the door ,easy to replace lock just don't want people to fix them themselves
play not working !!!!
Thank you bro
Iam Glad we could help you.
My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008
If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
same below problem I am facing
thank you :) very helpful :))
Got same washet
A Rafigeration
come to India
DE eh-weh code
Kode de bukan dorr swit, silahkan mampir di channel saya