Glad you enjoyed it I hope it helps you please remember I have put all the error codes for this machine up on the webpage for you which I am building at the moment www.how-to-repair.com/help/dismantling-samsung-washing-machine-wd0804w8e1xeu-fault-finding-and-how-components-work/
I'm really glad my video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
These samsung machines are so bad :( thanks for showing us all of this so buyers are aware! and you honest points on the good and bad! really is nice to see proper honest work and opinions! thanks
Thanks a lot for your kind words. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
My Samsung washer started doing banging noises when spin cycling, even with an empty drum, though it's not loose like that I suspect the spider is on its last leg after about 10 years, I'm going to replace the spider and bearings so this video is very helpful. Greetings from Portugal
Thank you! We had a silicone lint thingy stuck between the two drums. Thanks to your video we were able to open the heater and reach in to there and fish it out! Thank you!
Thanks for the sub mate! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
I watched this with a lot of Interest. Thanks for Explaining so much. What I was looking for is how the plastic wash paddles inside the drum are fixed? I need to replace 2 of them because of damage. Are the really screwed from the outside of the drum?
Hi mate, thanks a lot for your good message. I have a related video about how to replace and fit a drum paddle lifter and you can reach it via this link: th-cam.com/video/1gbv0ClR4dY/w-d-xo.htmlsi=PWb9dnFn8ibSbktT Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Glad it was helpful! @TheWangbolizhong please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Much appreciated mate. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
I appreciate this video immensely as i have this exact issue.... I work with fixing/dismantling machinery and wiring but, this is most definitely not a job i would like to spend my time on... Its sad to say, but my 12 year old washer is no more 😕 thankyou
Glad I could help mate. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Glad it was helpful mate! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
A while ago on TH-cam, you ask me a question about your LG washer. I just thought I’d let you know that I have now made a complete playlist to assist you in any repairs that you ever have. If it helps, you don’t forget to share it with your friends who may also own an LG. th-cam.com/video/w5dZ4Pj8Jdo/w-d-xo.html
I bought a Samsung EcoBubble unit not long ago and I wish I watched this video before. Although is a slightly newer & fancier model, that poor quality spider worries me a lot. I just hope they've put a good one in my machine. Very well explained, video is top. L.E: Apparently things a bit more complicated related with that spider. There is both an economic reason and one related to how physic chemistry works. Basically, are two metals that are giving and taking each other ions, each part with own electrical charge will get or give these elements. So, they figured out that a stainless-steel drum is more expensive than a drum spider to replace so the part to sacrifice has been chosen: the spider made of magnesium-aluminum alloy which will _feed_ in time the drum maintaining it shine. Of course, there is this idea of composite materials to be used, but paired with high grade stainless steel or other metals will increase the cost of the unit quite a bit. Collected the info above from reddit, various technical forums and a study I found on Research Gate website.
Glad it was helpful to you mate! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
Hi thanks very much for the video. The spider and drum bearings are shot, the drum itself by the door is shredding. Should I replace the drum, spider and bearings or get a new machine. Thanks very much an informative video.
Hello Paul, very detailed washing machine explanation of equipment and functions and this guidance improved my understanding and other's skills too. I am wondering about level switch does control same , constant level or veritable level of each washing program, means, normal, heavy load etc. I have observed in machine level was same in all programs.
Just found your site - outstanding. Reason i was looking was because my Samsung WF90F5E5U4W finally decided not to power up on Xmas eve. Had been stopping in middle of a wash but if turned off and left for bit would come back on and finish wash. Had a very kind washing repair man round who took the top off looked at it and said - common fault with logic boards and not worth repairing - didn't even check the fuse! I gave him his £30 call out fee and off he trotted. My question is - is it worth having a look at the boards - have been involved with electronics for many years so throwing away what looks to be a perfectly good machine does not sit well with me.
Hi Guys fantastic videos. Our Samsung 8.0kg Eco bubble keeps stopping and shows and 3E error code. It does carry on when you resume again but is doing this increasingly often. Any help and advice where first to look would be massively appreciated. Thank you Ben & Vicky
Brilliant video, I have a Samsung with an add wash door. Coming up with DDC code. I was going to inspect the wiring and plug at the main door hinge as movement in that seems to stop the code popping up sometimes. Got any videos on removing that door, or is it much the same?
This should be a reminder to do regular hot washes (60°C and higher). That not only keeps the machine clean and mould-free, but also lengthens the machine's lifespan by a very sizeable amount!
I totally agree with you I did a video on mould which emphasises what can come out of a machine that you think is clean. I've time to stamped it, so you don't have to watch the whole video th-cam.com/video/HnS87Tw4amM/w-d-xo.htmlsi=crDPbNobGyb6g63n&t=1702
Hello! This video is great. I have a similar model and my drying issue is that it stops on 1 minute and takes longer to dry than before and when it does "end" and you open it, vapor comes out. Like it's not being able to remove the evaporated water. I opened the top cover and cleaned the heating system, fan and condenser back. The dryer worked great for the next 3 cycles and then it started again with the old problem. Any ideas?
Paul, nice meeting you! Greetings from Moldova! Thanks for sharing your knowledge! Is 3E a motor problem only? Machine stops in midcycle doing nothing. I press start again and machine continues where it stopped. Once I did get 3E error though. Thinking to change the hall censor. Motor wires checked. Your opinion greatly appreciated!
Hi, I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well. We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
@@How-to-repair Paul, thanks for your response. It looks like the calibration fixed the problem. If it will reappear, I'll send all the info. God speed!
Glad you think so! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
Very good video. Can the metal bearing holder that sits inside the plastic outer housing be fixed. The bearing holder has 6 metal fins on which it slides into the plastic outer drum. This is loose in our machine.
Hi. I had an open circuit solenoid that feeds the condensor and replaced it. All fine. However I notice at around 25 minutes into the video the "baffle" that is inline to the condensor is fitted in the opposite direction to the one shown in the video. Any ideas why that might be?
They don't use stainless steel for the spider because they want you to buy a new washer every 5 years. If you insist to change the bearings and the spider, that will not be economic once you factor in the cost of parts and labour. The only way to sort out manufacturers is to have 3rd party ESG reporting similar to energy efficiency. Based on this video, on an ESG star rating that washer would get 2 out of 5 stars - 2 because at least you can change the bearings and spider unlike most other washers.
I think at 32:51 is a clear proof they they want it to break so we would buy a new one. We could get around it to add less noble metal like zinc, but question how to connect it in between the metals. This solution is used on boats to protect more precious metals.
Tried replacing the spider in mine as it broke the spider in these machines are so fine it corrodes as soon as detergent hits it really mines been apart so many times as the bolts holding the spider in keep coming loose lucky I brought some threadlock hopefully it cures it Would expect better though from such a expensive machine
I agree 100% regarding stainless steel spiders! I had mine custom made for one of my projects, and it was 80 Euro (approximately £70). I searched for the original Samsung spider on a UK website, and it is roughly the same, sometimes even more expensive than the stainless steel one I bought! On another note, I was wondering, would a Vestel motor (made by Welling) fit the module of Indesit IWSC61251? The motor specifications appear to be the same, 17000rpm and 300W. Thanks in advance!
If the pin configurations to the windings and brushes are the same and everything else matches up, they should work, but I can't guarantee you because I have not got the motor in front of me to check
Can u recommend a reliable washer model and brand? My identical model's spider arm cracked just like this, lasted 12yrs and after watch this im rethinking my decision to get another Samsung (thinking Series 6 11kg washer). Thank you, thoughts? Planned obsolescence should be illegal!
I had a similar question before and here is my answer: www.how-to-repair.com/faqs/bosch-or-any-other-recommend-washing-machines-to-buy/
7 หลายเดือนก่อน
Hi, really great video but one question : I have a samsung WF0714Y7E and need to access the tube that go from drum to the filter part (error 5E and I know the problem is here, we washed a carpet and it loosed a lot of him inside the machine) but I can't remove the front panel and not saw screws at the bottom of the machine. Do you know what avoir me to remove the panel ? Thank you very much, all the rest was quite easy to found by myself ;)
Do you need to take the entire washing machine apart in order to take out the drum? I have a WD10J6410AW/AX from samsung and the drum is loose so I want to see if I can take just the drum out to repair it without taking it all apart and risking losing pieces and not being able to put it all together again.
Paul i just did a Bearing exchange, on a 8 Kg ecobubble no problem , but! when i wanted to start it again, i just making a humming sound from the pump, tested the differents things and can do a water test , everthing works when in test mode, but found the E1 error when turning the knob left, is there a sensor for water level?
Hi Paul, thanks for the video. I have the same model and the drum is no longer centered. Everything works fine until it gets to the spin cycle-because the drum isn't centered, it won't complete the cycle. Do you think it could be the spider or something else? I wonder how could I recenter the drum? Thanks in advance!
Thanks for the info but I need you to use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well. I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Happy to help mate! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
can you please help me with a problem I have with my samsung 6kg washing machine. it turns on starts working then turns off and won't turn on again.. i have to unplug it and leave it for a few minutes then it barely turns on. as if going through a short circuit
A while ago on TH-cam, you ask me a question about your LG washer. I just thought I’d let you know that I have now made a complete playlist to assist you in any repairs that you ever have. If it helps, you don’t forget to share it with your friends who may also own an LG. th-cam.com/video/w5dZ4Pj8Jdo/w-d-xo.html
I believe my Samsung cannot do the high spin and is leaving my clothes soaked.. Do you have a video that could point me in the right direction? Samsung bubblewash VRTplus 11 kg
How do you remove the moisture sensor screw? Mine was factory tight, tried tapping the screw head with hammer , spray with wd40, heating and counter twist, still non of it works
First of all: love the videos! Second: Maybe you know the solution for my problem. My machine recently started making a pinging/snapping sound, and it's only there when the drum turns and the belt is on. I've replaced the belt using your videos, but that didn't solve it. I checked the belt and wheel for burrs and can't find any. Do you know what it might be? The last video on my profile is a short clip of the sound.
Thanks very much for sending us the video. I think I have the answer for you. Take a look at this post I created for you. www.how-to-repair.com/help/faqs/samsung-ww80j6403ew-ecobubble-pinging-snapping-sound-on-belt-wheel/
I've got a stumper for you Paul. I have a samsung ecobubble washer 11kg WW11K8412OW. Replaced the spider. performed a calibration cycle. Now after a cycle the door latch clicks open and closed intermittently till it turns off, door is locked so you can't open it. You have to turn it back on for it to open, then it starts the cycle again while the door is open. I have two of these so I swapped out parts from the good one, swapped the main controller, display controller and the whole front panel/door. It still continues to click the door unlocked and locked after each cycle. Can't find anything on google or youtube even mentioning it. Any help would be greatly appreciated. Cheers from Oz
This is normally either a bad connection on the door lock the door lock might not be aligning correctly or a faulty door lock but trying to help remotely is very hard for me to assist
@@How-to-repair Thanks for the reply, But I swapped the whole front part of the washers, door and controller. The fault stayed on the same washer which tells me its not that. Think it may be a pump issue because its the only thing I haven't swapped out, other than the drum itself.
The use of too much detergent will also cause damage to the spider and causes it to collapse, as the washing machines from nowadays uses very very little water to wash and rinse, detergent all remains in the machine when you use too much detergent because the machine uses less water and can’t rinse the detergent away. It will also cause damage to the bearing seal resulting in the seal to leak, and causing the bearings to die early.
Help me plz , i have bought samsung 9 kilos silver one .the same day the washing machine during spinning was so high ,the company came and said that the main circuit is displaced from its place and he use the screw driver to do that ...and the sound get smoother but not affordable CAN you guide me if that fault is the reason behind the noisy sound ...iam frustrated fr.the age of my washing machine is is 10 days still under warrenty to change it ...but the company said the sound is not noisy ...if i can send video plz provide me with email .thanks for ur valuable efforts .what should i do ?
I agree that it the aluminium spider isnt the best choice in terms of durability. But simply saying that it wouldnt cost more to make it out of stainless steel is simply said than done. Not only is steel more expensive. The casting process is a little harder than aluminium. The added weight also affects the whole machine, you will need a more powerfull motor to get it spinning. Also all the added weight adds up to shipping costs, from part manufacturer all the way to the end supplier.
I have a problem with my Ecobubble washing machine, where is trips the house electrics about 10 seconds just after pressing start. any ideas? I looked at the loading door lock but looks as though that works ok. (Took the switch apart and watched the thermo strip move to the lock position, just as it gets there the power trips)
First thing to check is the motor. If it's the old version with carbon brushes, then this could be the problem second do you want to check the heating element? I've got videos on all these on the channel
I am having error 4C on my Samsung Washer dryer AD Wash eco bubble and each wash mode gives this error only the quick wash mode water is getting drain once this error occurred then the power control can be access I can see foam on the water level pressure switch can you advice
Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well. I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Yes, I agree with that I see it more often than other countries like Italy @patrickbonner4841 please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
i need a help, i have the same machine, and always shows on display "HOT" (before and after use), i checked heating coil, it is ok, checked temperature senzor, it is ok, watched on everythink and always show on display HOT, after couple restarts it will go in normal use, but after washing...it shows again...and i must plug off cable from electricity couple times till again start working...and there is going repeatly the same... i already changed main heating coil...did not help... so i am curious about that... anybody similiar xperience???
My Samsung has already suffered the spider replacement twice !!!! The original one withstood 6 years. The replacement only lasted 4 !!! I have just replaced it and i know that in 4 years it will collapse as well. Shame on you SAMSUNG. But anyway; great video !!! PS. Does anyone have a clue how to extend the spider's lifespan ? I’ve heard about some strange attempts like resin coating or painting, Others claim it will only make things worse as the moisture will fill the potential cracks leading to faster corrosion ..... ant thoughts ?
Electrolysis is normally the main problem but also water hardness and the type of detergent are you using can also affect it but without knowing what type of water you have it’s hard for me to comment. I would also make sure the machine is well earthed
How could I open the washing machine door if it was locked...? And I couldn't open it again.... 😢 It is the same that you made the video on it.. Samsung eco bubble
first class video...Paul..you are an expert...with machines.
Glad you enjoyed it I hope it helps you please remember I have put all the error codes for this machine up on the webpage for you which I am building at the moment www.how-to-repair.com/help/dismantling-samsung-washing-machine-wd0804w8e1xeu-fault-finding-and-how-components-work/
This video is pure public service. Thank you from Portugal
I'm really glad my video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇
Here's the poll question: www.youtube.com/@How-to-repair/community
Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
These samsung machines are so bad :( thanks for showing us all of this so buyers are aware! and you honest points on the good and bad! really is nice to see proper honest work and opinions! thanks
Why, I know one that is 12 years old and still working!
Very good explanation, very clear photography, excellent experience and delivery of information. Thank you very much.
Thanks a lot for your kind words. Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks you, exactly my problem with Samsung.....cheers from Slovakia
My Samsung washer started doing banging noises when spin cycling, even with an empty drum, though it's not loose like that I suspect the spider is on its last leg after about 10 years, I'm going to replace the spider and bearings so this video is very helpful. Greetings from Portugal
Thank you! We had a silicone lint thingy stuck between the two drums. Thanks to your video we were able to open the heater and reach in to there and fish it out! Thank you!
🎩🎩off to you. Mine lasted 12 yrs before the spider arm cracked, shame such an endeavour needed for a fix! Subbed 😊
Thanks for the sub mate!
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
I watched this with a lot of Interest. Thanks for Explaining so much. What I was looking for is how the plastic wash paddles inside the drum are fixed? I need to replace 2 of them because of damage. Are the really screwed from the outside of the drum?
Hi mate, thanks a lot for your good message. I have a related video about how to replace and fit a drum paddle lifter and you can reach it via this link: th-cam.com/video/1gbv0ClR4dY/w-d-xo.htmlsi=PWb9dnFn8ibSbktT
Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Exelent video. Thank you for helping me to repair myself drum bearings. Othervise it will cost me a fortune.
Thank you for making these videos sir
Thank you for your detailed explanation👍
Glad it was helpful! @TheWangbolizhong please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Top man excellent work
Much appreciated mate. Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
I appreciate this video immensely as i have this exact issue....
I work with fixing/dismantling machinery and wiring but, this is most definitely not a job i would like to spend my time on...
Its sad to say, but my 12 year old washer is no more 😕 thankyou
Exactly why machine stopped working and thanks to your video, I was able to confirm this, take it apart and sell off the bits
Glad I could help mate. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇
Here's the poll question: www.youtube.com/@How-to-repair/community
Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.
Thanks. Excellent tutorial. Very helpful 👍👍👍👍
Glad it was helpful mate! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
Please could you advise which makes of washing machine are the most reliable. Many thanks. - Your videos are much appreciated.
LG has been suggested.
A while ago on TH-cam, you ask me a question about your LG washer. I just thought I’d let you know that I have now made a complete playlist to assist you in any repairs that you ever have.
If it helps, you don’t forget to share it with your friends who may also own an LG.
th-cam.com/video/w5dZ4Pj8Jdo/w-d-xo.html
I bought a Samsung EcoBubble unit not long ago and I wish I watched this video before. Although is a slightly newer & fancier model, that poor quality spider worries me a lot. I just hope they've put a good one in my machine. Very well explained, video is top.
L.E: Apparently things a bit more complicated related with that spider. There is both an economic reason and one related to how physic chemistry works. Basically, are two metals that are giving and taking each other ions, each part with own electrical charge will get or give these elements. So, they figured out that a stainless-steel drum is more expensive than a drum spider to replace so the part to sacrifice has been chosen: the spider made of magnesium-aluminum alloy which will _feed_ in time the drum maintaining it shine. Of course, there is this idea of composite materials to be used, but paired with high grade stainless steel or other metals will increase the cost of the unit quite a bit. Collected the info above from reddit, various technical forums and a study I found on Research Gate website.
Glad it was helpful to you mate! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
@@How-to-repair Btw, there is a security problem with your website, probably a certificate issue that should be taken care of. Cheers.
Hi thanks very much for the video. The spider and drum bearings are shot, the drum itself by the door is shredding. Should I replace the drum, spider and bearings or get a new machine. Thanks very much an informative video.
Great video. Very helpful. Thank you
Hello Paul, very detailed washing machine explanation of equipment and functions and this guidance improved my understanding and other's skills too. I am wondering about level switch does control same , constant level or veritable level of each washing program, means, normal, heavy load etc. I have observed in machine level was same in all programs.
Just found your site - outstanding. Reason i was looking was because my Samsung WF90F5E5U4W finally decided not to power up on Xmas eve. Had been stopping in middle of a wash but if turned off and left for bit would come back on and finish wash. Had a very kind washing repair man round who took the top off looked at it and said - common fault with logic boards and not worth repairing - didn't even check the fuse! I gave him his £30 call out fee and off he trotted. My question is - is it worth having a look at the boards - have been involved with electronics for many years so throwing away what looks to be a perfectly good machine does not sit well with me.
Nice manual! Thanks 👍. Any idea about UC error?
Hi Guys fantastic videos. Our Samsung 8.0kg Eco bubble keeps stopping and shows and 3E error code. It does carry on when you resume again but is doing this increasingly often. Any help and advice where first to look would be massively appreciated. Thank you Ben & Vicky
Brilliant video, I have a Samsung with an add wash door. Coming up with DDC code. I was going to inspect the wiring and plug at the main door hinge as movement in that seems to stop the code popping up sometimes. Got any videos on removing that door, or is it much the same?
This should be a reminder to do regular hot washes (60°C and higher). That not only keeps the machine clean and mould-free, but also lengthens the machine's lifespan by a very sizeable amount!
I totally agree with you I did a video on mould which emphasises what can come out of a machine that you think is clean. I've time to stamped it, so you don't have to watch the whole video th-cam.com/video/HnS87Tw4amM/w-d-xo.htmlsi=crDPbNobGyb6g63n&t=1702
Hello! This video is great. I have a similar model and my drying issue is that it stops on 1 minute and takes longer to dry than before and when it does "end" and you open it, vapor comes out. Like it's not being able to remove the evaporated water. I opened the top cover and cleaned the heating system, fan and condenser back. The dryer worked great for the next 3 cycles and then it started again with the old problem. Any ideas?
Paul, nice meeting you! Greetings from Moldova! Thanks for sharing your knowledge! Is 3E a motor problem only? Machine stops in midcycle doing nothing. I press start again and machine continues where it stopped. Once I did get 3E error though. Thinking to change the hall censor. Motor wires checked. Your opinion greatly appreciated!
Hi, I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well.
We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
@@How-to-repair Paul, thanks for your response. It looks like the calibration fixed the problem. If it will reappear, I'll send all the info. God speed!
Best video 🎉
Glad you think so! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
Very good video.
Can the metal bearing holder that sits inside the plastic outer housing be fixed. The bearing holder has 6 metal fins on which it slides into the plastic outer drum. This is loose in our machine.
Any mid budget brand washer you would recommend buying new these days?
very good video mate fair play
Hi. I had an open circuit solenoid that feeds the condensor and replaced it. All fine. However I notice at around 25 minutes into the video the "baffle" that is inline to the condensor is fitted in the opposite direction to the one shown in the video. Any ideas why that might be?
They don't use stainless steel for the spider because they want you to buy a new washer every 5 years. If you insist to change the bearings and the spider, that will not be economic once you factor in the cost of parts and labour. The only way to sort out manufacturers is to have 3rd party ESG reporting similar to energy efficiency. Based on this video, on an ESG star rating that washer would get 2 out of 5 stars - 2 because at least you can change the bearings and spider unlike most other washers.
I think at 32:51 is a clear proof they they want it to break so we would buy a new one. We could get around it to add less noble metal like zinc, but question how to connect it in between the metals. This solution is used on boats to protect more precious metals.
Tried replacing the spider in mine as it broke the spider in these machines are so fine it corrodes as soon as detergent hits it really mines been apart so many times as the bolts holding the spider in keep coming loose lucky I brought some threadlock hopefully it cures it
Would expect better though from such a expensive machine
I agree 100% regarding stainless steel spiders!
I had mine custom made for one of my projects, and it was 80 Euro (approximately £70).
I searched for the original Samsung spider on a UK website, and it is roughly the same, sometimes even more expensive than the stainless steel one I bought!
On another note, I was wondering, would a Vestel motor (made by Welling) fit the module of Indesit IWSC61251? The motor specifications appear to be the same, 17000rpm and 300W.
Thanks in advance!
If the pin configurations to the windings and brushes are the same and everything else matches up, they should work, but I can't guarantee you because I have not got the motor in front of me to check
@@How-to-repairthanks for the info!
Can u recommend a reliable washer model and brand?
My identical model's spider arm cracked just like this, lasted 12yrs and after watch this im rethinking my decision to get another Samsung (thinking Series 6 11kg washer).
Thank you, thoughts?
Planned obsolescence should be illegal!
I had a similar question before and here is my answer: www.how-to-repair.com/faqs/bosch-or-any-other-recommend-washing-machines-to-buy/
Hi, really great video but one question : I have a samsung WF0714Y7E and need to access the tube that go from drum to the filter part (error 5E and I know the problem is here, we washed a carpet and it loosed a lot of him inside the machine) but I can't remove the front panel and not saw screws at the bottom of the machine. Do you know what avoir me to remove the panel ? Thank you very much, all the rest was quite easy to found by myself ;)
Do you need to take the entire washing machine apart in order to take out the drum? I have a WD10J6410AW/AX from samsung and the drum is loose so I want to see if I can take just the drum out to repair it without taking it all apart and risking losing pieces and not being able to put it all together again.
Paul i just did a Bearing exchange, on a 8 Kg ecobubble no problem , but! when i wanted to start it again, i just making a humming sound from the pump, tested the differents things and can do a water test , everthing works when in test mode, but found the E1 error when turning the knob left, is there a sensor for water level?
Thanks for the video, if i record and send to you a sound it will you be able to tell me what is it?
upload to youtube then send link
Hi Paul, thanks for the video. I have the same model and the drum is no longer centered. Everything works fine until it gets to the spin cycle-because the drum isn't centered, it won't complete the cycle. Do you think it could be the spider or something else? I wonder how could I recenter the drum? Thanks in advance!
Thanks for the info but I need you to use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well.
I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
Same problem with my machine. And a bad smell of the clothes after Washing. Seems like the spindel is bent. No bad sounds and everything else is ok
Thank you sooo much,you are *
Happy to help mate! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
can you please help me with a problem I have with my samsung 6kg washing machine. it turns on starts working then turns off and won't turn on again.. i have to unplug it and leave it for a few minutes then it barely turns on. as if going through a short circuit
mines doing the same any ideas?
Paul: You may know that Ssung has experienced law suit in USA for just this rotten spider problem. LG seems to be better regarded for durability.
Thanks. Its nice to know which ones are good and not always which ones are broken.
A while ago on TH-cam, you ask me a question about your LG washer. I just thought I’d let you know that I have now made a complete playlist to assist you in any repairs that you ever have.
If it helps, you don’t forget to share it with your friends who may also own an LG.
th-cam.com/video/w5dZ4Pj8Jdo/w-d-xo.html
I believe my Samsung cannot do the high spin and is leaving my clothes soaked.. Do you have a video that could point me in the right direction? Samsung bubblewash VRTplus 11 kg
How do you remove the moisture sensor screw? Mine was factory tight, tried tapping the screw head with hammer , spray with wd40, heating and counter twist, still non of it works
First of all: love the videos!
Second: Maybe you know the solution for my problem.
My machine recently started making a pinging/snapping sound, and it's only there when the drum turns and the belt is on. I've replaced the belt using your videos, but that didn't solve it. I checked the belt and wheel for burrs and can't find any.
Do you know what it might be?
The last video on my profile is a short clip of the sound.
Thanks very much for sending us the video. I think I have the answer for you. Take a look at this post I created for you. www.how-to-repair.com/help/faqs/samsung-ww80j6403ew-ecobubble-pinging-snapping-sound-on-belt-wheel/
@@How-to-repair Will try it out, thanks for the quick response!
I've got a stumper for you Paul. I have a samsung ecobubble washer 11kg WW11K8412OW. Replaced the spider. performed a calibration cycle. Now after a cycle the door latch clicks open and closed intermittently till it turns off, door is locked so you can't open it. You have to turn it back on for it to open, then it starts the cycle again while the door is open. I have two of these so I swapped out parts from the good one, swapped the main controller, display controller and the whole front panel/door. It still continues to click the door unlocked and locked after each cycle. Can't find anything on google or youtube even mentioning it. Any help would be greatly appreciated. Cheers from Oz
This is normally either a bad connection on the door lock the door lock might not be aligning correctly or a faulty door lock but trying to help remotely is very hard for me to assist
@@How-to-repair Thanks for the reply, But I swapped the whole front part of the washers, door and controller. The fault stayed on the same washer which tells me its not that. Think it may be a pump issue because its the only thing I haven't swapped out, other than the drum itself.
The use of too much detergent will also cause damage to the spider and causes it to collapse, as the washing machines from nowadays uses very very little water to wash and rinse, detergent all remains in the machine when you use too much detergent because the machine uses less water and can’t rinse the detergent away. It will also cause damage to the bearing seal resulting in the seal to leak, and causing the bearings to die early.
Help me plz , i have bought samsung 9 kilos silver one .the same day the washing machine during spinning was so high ,the company came and said that the main circuit is displaced from its place and he use the screw driver to do that ...and the sound get smoother but not affordable CAN you guide me if that fault is the reason behind the noisy sound ...iam frustrated fr.the age of my washing machine is is 10 days still under warrenty to change it ...but the company said the sound is not noisy ...if i can send video plz provide me with email .thanks for ur valuable efforts .what should i do ?
I agree that it the aluminium spider isnt the best choice in terms of durability. But simply saying that it wouldnt cost more to make it out of stainless steel is simply said than done. Not only is steel more expensive. The casting process is a little harder than aluminium. The added weight also affects the whole machine, you will need a more powerfull motor to get it spinning. Also all the added weight adds up to shipping costs, from part manufacturer all the way to the end supplier.
I have a problem with my Ecobubble washing machine, where is trips the house electrics about 10 seconds just after pressing start. any ideas?
I looked at the loading door lock but looks as though that works ok. (Took the switch apart and watched the thermo strip move to the lock position, just as it gets there the power trips)
First thing to check is the motor. If it's the old version with carbon brushes, then this could be the problem second do you want to check the heating element? I've got videos on all these on the channel
I lost some socks in the same washing machine like yours, where could be? Any good idea? Already tried the bottom filter.
I am having error 4C on my Samsung Washer dryer AD Wash eco bubble and each wash mode gives this error only the quick wash mode water is getting drain once this error occurred then the power control can be access I can see foam on the water level pressure switch can you advice
Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well.
I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍
@@How-to-repair hi i repaired it myself by replacing the water level pressure switch and issue fixed.
South Korean made machines weakest link is the spiders
Yes, I agree with that I see it more often than other countries like Italy @patrickbonner4841 please remember to subscribe to our channel as that really helps us th-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
@@How-to-repairI like that large display on your multimeter
i need a help, i have the same machine, and always shows on display "HOT" (before and after use), i checked heating coil, it is ok, checked temperature senzor, it is ok, watched on everythink and always show on display HOT, after couple restarts it will go in normal use, but after washing...it shows again...and i must plug off cable from electricity couple times till again start working...and there is going repeatly the same... i already changed main heating coil...did not help... so i am curious about that... anybody similiar xperience???
My Samsung has already suffered the spider replacement twice !!!! The original one withstood 6 years. The replacement only lasted 4 !!! I have just replaced it and i know that in 4 years it will collapse as well. Shame on you SAMSUNG. But anyway; great video !!! PS. Does anyone have a clue how to extend the spider's lifespan ? I’ve heard about some strange attempts like resin coating or painting, Others claim it will only make things worse as the moisture will fill the potential cracks leading to faster corrosion ..... ant thoughts ?
Electrolysis is normally the main problem but also water hardness and the type of detergent are you using can also affect it but without knowing what type of water you have it’s hard for me to comment. I would also make sure the machine is well earthed
How could I open the washing machine door if it was locked...? And I couldn't open it again.... 😢
It is the same that you made the video on it.. Samsung eco bubble
This video might help you th-cam.com/video/-65_eoT6zuk/w-d-xo.html
Waaawo
fc
fc Thailand