Dewalt DCD708 Review - DCD708 vs DCD777
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Review of the DeWalt DCD708C2 20 volt brushless cordless drill and comparison to the DeWalt DCD777C2 brushless cordless drill.
Use the links below to support this channel. Thanks!
DeWalt DCD708C2 amzn.to/2SN8tbt
DeWalt DCD777C2 amzn.to/37jUWx0
![ลองสั่งของจากแอพ temu ถูกจริงหรอ?? [โกงไหมครับ ep.88 ] | DOM](http://i.ytimg.com/vi/RTcZSQTiDZw/mqdefault.jpg)
10 years from now the 708 will be considered a big heavy piece of crap drill as they will have something much lighter, smaller,twice the power, built in wifi, gps tracker , a camera and an hd screen for surfing the net .
I'm sure we will have autonomous drills that don't need humans at all.
Bahahhaha all true besides the screen 🤣🤣🤣
I have the 708 and it works great for stuff around the house. If I am doing super heavy duty stuff I bust out the 996, but for the money, the 708 is a trusty tool that gets the job done.
I am a carpenter and love the Atomic .
Great job - Thanks for sharing! I am deciding which one would work the best for me, and I think I will end up going with the 708. Unfortunately I usually buy from Lowes and although they have the 777, it does not appear they are stocking the the 708.
Super helpful. Thanks so much.
Love fact that you opened each drill - excellent job
My DCD708 Came with two 1.5Ah batts ! :D
Useful review. I just used a borrowed 777 to put a couple of 1/2” holes in horse fencing to hang a gate. Did a great job. The grip was quite comfortable. Guess I will have to check out 708 at HD to compare.
Awesome comparison. Extremely informative. Thank you
Compare hole amounts with 2 different battery isn't the best choice for comparison. Aside from this its a very good in depth review.
That paint issue is really an issue. I really wont expect this from DeWalt.
All their drills have the same issue. That's why I'll never buy one of them
Спасибо!
Привет из России!
Good job !!!
Тhank you , very interesting and informative!
Please test the drill and impact gercules .
One thing that is rarely reviewed is how well the chuck holds. Since cordless drills went to keyless checks, they often do not hold that great.Also, what is the minimum size for the chuck. To get more grip surface they often sacrifice the smallest bit sizes.
I have put tape on smaller bits to give the chuck more bite. Now all the newer sets come with a rapid load so it tightens down pretty good.
For tight areas in cabinets, etc, I much prefer a DCD710.
4:23 only 30ft-lb of torque, that means ~40Nm? The user manual for both says up to 65Nm in gear one. That torque can be achieved only with bigger battery?
Use a 20v 5 or 6 amp batteries longer run time more power
Great analysis. Just bought the 708C2 on the clearance rack at Home Depot. $89. Must have been a mistake, drill, 2 batteries, charger, and DeWalt bag. Got a laugh when you were disassembling the two dewalts, used a kolbalt.
Excellent and very professional review ! Thanks !
So the DCD703 is the slightly cheaper cost wise, as well as smaller if that's what you need. With the DCD777 it's slightly better in terms of battery, torque, and power but less in speed by like .3 seconds overall. I'll go with the DCD777! only $120 at lowes, and works with the 1.5 Ah battery I have now for my Dewalt impact DCF885. Thanks for your well made video! Loved seeing it taken apart
Thanks! They are both great drills. Can't really go wrong. I tend to pick the 708 bc its smaller.
What a difference 2 years make, The 708 is now $134 and the 777 is $150. Yikes
Nice review and comparison, thank you! Both chucks have auto-lock function with nice click noises?
Super helpful. Thanks for taking the time to do this.
You're welcome! Thanks for watching!
Great review. Thank you!
The 708 is definitely a good light duty drill, if you try to use it for heavy-duty shit, it lacks
Good comparison, i appreciated the exact specs info. You did a lot of work, thank you for your efforts
708 is much more practical for working at height, weight matters
3:44 how is possible to hold like this a drill? You are covering the vents. ..
Thanks for sharing
Did you happen to try the 777 battery on the 708 to see if you would get the same amount of holes drilled?
Can you interchange batterys
yes, you can put a genuine 5Ah XR battery if you need to
Very well done. Would have liked for you to touch on the differences and performance (if any) of the clutch mechanism. Thank you!
Thanks! I didn’t notice any difference. They both work well.
My brand new 708 clutch started clicking while chucking it up in my hand like it was set on #3 instead of the drill bit setting. 👿 It’s done it twice now. I’ll be exchanging it.
It doesnt matter if its their atomic line as long it can accomplished your works
5.3 holes/watt-hour...impressive new stat! Well done overall, impressive metrics and analysis
Today all markets sale 777 with two 1.3Ah battaries, so I think 708 is the best chois now.
Great review very useful before getting one. Thank you.
You should have swapped out the batteries with each other to check the performance of the drills especially since it’s easy to buy larger Dewalt batteries if so desired.
Lol, right? Like wtf is the point of comparing two different drills that accept the same battery…. With different batteries lol
Great job! Thank you!
Awesome, thorough review. Upload more stuff! You're great at this.
very useful comparison for a complete noob like me
Real world experience....its too light for roof decking. Felt like my arm was pushing all day. 18V still works and just the weight of the tool helps drive screws in faster. Little heavier but nothing to cry about.
I can understand how one could feel that but I have to disagree, you don’t need to push harder because it’s a fraction lighter, let the tool to the work.
Feil Forges
Not a fare test
Test again wthe the same battery
it really hurts me to see them disassembled
Thanks
Approve of the AvE reference. Good video!
I LOVE MY 777.....Yaa Mon.
It’s not a quick charger
The DCD777 its brushless too, not brushed as you tell in the description
Thanks updated! I knew that not sure why I typed that.
a DCD 708 tem quantos NM?
teeth 10/10 good job mate
Great review ....You gave the answers i was seeking...Nice!!
Glad I could help!
Very Compressive
Thanks Brian!
Make a 777 vs a 778
Thank you 🙏
Bought the 708 kit today. It feels more like my impact drill than my other b&d drills. I mean, the speed goes up exponentially and runs away if you're not careful. And like my impact drill, the speed selection isn't that obvious. But either mode, when I run it at low speed it makes this weird rattling noise but that might be because this guy at home depot dropped it on the concrete. I should have walked away after that but I already spent 30 mins trying to get someone to break one out of prison. Also frustrating is that all the dewalt drills at hd have the model number on the back which you can't see. At my local hd, you can't pick up the drills and turn around because they're locked in, and unfortunately, many of the dewalt drills look very similar so I didn't have a chance to check out the 777.
My brand new 708 clutch started clicking while chucking it up in my hand like it was set on #3 instead of the drill bit setting. 👿 It’s done it twice now. Then led is easily blocked out while using, never had that problem with it up under the clutch.
I have not had that problem with the slipping clutch. I would return it if you can and get a new one.
My new 708 does the same thing on 3 but goes away on 5 or higher on low, not high.
@@icyrene1 What do you mean?
The clicking is the clutch doing it's job. Make sure it's set in highest setting or screw mode for driving heavy screws.
No light?
Watch until the end! Both have lights!
It's "versus" not "verse".
It’s pronounced “versus”, not “verse.”
Make your own video and pronounce it however you like.