ฝัง
- เผยแพร่เมื่อ 2 ธ.ค. 2023
- The Dewalt 777 brushless electric drill, which is terrible to watch, works well in a test run.
The outer shell is covered with a thick layer of hard glue, the gearbox lubricating oil has dried up, the gap is large, and the chuck is worn through.
This time, the most time was spent cleaning the remaining glue on the casing, completely disassembling the gearbox, relubricating, replacing the new chuck, and adding grease to the motor bearings.
Replace the battery with a new cell.
In the end, the functions were fully restored, the power was strong, and it could fight for another ten years. - แนวปฏิบัติและการใช้ชีวิต
![[TH] 2024 PMSL SEA W1D2 | Summer | แข่งดุเดือด ยิ่งกว่าแดดที่ไทย](http://i.ytimg.com/vi/R4RirQ4N1C0/mqdefault.jpg)
No unnecessary explanations, no jargon, just 21 minutes of gold. Keep up the good work!
That is an amazing refurbishment. I have refurbished a lot of DeWalt tools myself, but you rank up there with your abilities... Very nice indeed... Thumbs Up!
Thank you for your review, I will continue and hope to do better details in the future.
I was amazed how well you was able to clean it! Those EVE 25P are good cells and should have pretty long lifespan.
It did take me a lot of time to clean the glue off the casing. , Fortunately, the marriage was relatively clean in the end. This time I used a brand new battery and it feels very powerful. Thank you for your comment.😄
Nice work dude. Such a wonderful restoration 👍👍
Thank you for liking. I will continue to update more fun tool repair videos.😊
Very good restoration and good work with that glue 👍
Thank you for liking.😄
Best tool Dewalt. With it being as bad as it was at the beginning of the video and still being able to start after battery connect, it's amazing
First of all, it must be able to rotate, so that my subsequent work will be meaningful.😁😁
Отличная работа. Великолепный шурик. Редуктор весь металлический.
after all that beating it still run using good battery, well, quality product
Very nice work. I own alot of dewalt tools and would never let them get in this condition. Who ever had this drill didn't care about it.
People who love tools are really distressed to see this. Fortunately, I fixed it.😬
it's an art, sir. I know you spent a lot of time and effort in bringing these tools back to life. I have a small favor to ask: Can you add some descriptions for each step in the subtitles? It'd help us track what we need to do when we need to do the dirty job ourselves.
Thank you for your suggestions. I will try my best to introduce more subtitles in the future.
Nova de novo parabéns pelo ótimo trabalho.
Ficou nova, surprendente!
Thank you!
Абсолютно не важно сколько ему лет ,но вопрос что с ним делали чтоб он стал таким?какой профисионал?
Nice work! Drills are super complicated compared to impact tools.
Yes, there are three-stage reduction gears with many more parts.
Out of curiosity, what was the price point on the P25 compared to VTC5A or VTC5D? Personally speaking I would opt for the latter. They have served me well for years.
Una señora restauración uuff exelente video saludos desde Colombia un beso 😂
Thank you for liking. I will continue to update.😃
Belo trabalho qual o nome deste tipo de videa que vc realizou o furo no final
Perfect
Top de mais !!!!
Prazeroso ver isso!!
Thanks you!😃
Good job. i would have cleaned the switch contacts as well to avoid that intermittent variable speed feature
Thank you for your suggestion.👍🏻
is the diesel oil used for ultrasonic cleaning reusable for another ultrasonic cleaning?
Yes, impurities will precipitate, just use the clean diesel above.
understood!@@RefurbishmentKJ
recuperar quando entra água também é possível ?
Restaurada furadeira sem fio 😉
Отличная реставрация и чистка!
Скажи пожалуйста что за жидкость? Которой ты промывал мотор?
I use diesel to clean the gears, you can also use kerosene, it is easier to dissolve the lubricant.
Не шестерни.
А мотор сам чем чистил?
По тайм коду 10:00 минут.
Чем промывал мотор?
@@user-ql9ho8zr1u Limpa contato, que se usa em eletrônicos provavelmente.
where did you find it,Titanic?
probably torched it, still running
За что этому инструменту так досталось?! Я по 6-8 лет использовал дрели и шуруповерты на стройке, но у меня они так не выглядят!
8:12 = Me having weird meal at 3am
You did not test the old batteries. Were they bad?
The battery cells are completely rusted and there is no way to save them.😀
Мне показалось или патрон сразу был новый, только попритиран и поцарапан для вида изношенности?
Dude, what is the brand of grease?
The SKF lubricants I use.
@@RefurbishmentKJ Which model is SKF yellow?
👍👍👍
Китаец не зашарил что для удобства окручивания корпуса редуктора, на кольце выбора момента есть специальный паз и его надо ориентировать на против одного из 4 саморезов)
who has a dewalt and have it torch to worst and still running
👏👏👏👏👏👏👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Кто-то мечтает о таком инструменте а кто-то им пренебрегает
8:12 yummy Dewalt sushi 😋
😂😂
Bosch ремонтирует Dewalt)))
Los taladros con motores bruslhes son muy re buenos pero cuando se daña en sistema eléctronico se acaba todo, sale muy caro la reparación y es mejor comprar otro
Me paso con un taladro DCF 887 de impacto con aproximadamente 2 años de buen uso.
Yes, the main control board of a brushless electric drill is the most expensive and the easiest to break. If you take good care of it, it will give you a good experience.
Você é um artista .
How does a person destroy such an expensive device?
Maybe they're rich..😂
@@KhyrulAiman yeaaahhh maybe...jesus christ...
Or working with company tools and they don't care because they don't by tools
@@powertoolsrepair 🤔🤔
Мастер 👍👍👍
Thank you for your support.
Not the same casings
Cân áp gì kì vậy ba
Купи новый корпус и не парься😅
Where is the BMS?
its ni.cad
@@ehsanrazaghi9809 No it's lithium 18650
The battery protection board is placed vertically behind the pins, and it is difficult to see clearly because it is covered with glue.🤗
💯👌👌👌😦
👏👏👏👏👏👏👏💯💯💯💯👍👌🇧🇷🇧🇷
52 Rah I will have a Big Brother boo boo boo BA ba BA ba BA ba BA ba BA ba BA ba BA ba BA ba LA la LA la LA la LA la LA la LA la LA la LA la LA la LA la LA la LA la LA la LA la LA la LA la LA.LA.LA la LA la LA la.La
На деволье нет таких крепежных шурупов там только торкс !
There may be some differences depending on the place of origin.
Инструмент замечательный, владелец плохой! 😁
Morocco
Dewalt tough!
18:55 bad news - u take cells grade B...
😢😢😢😢😢😢
Show 👏👏👏👏🇧🇷🇧🇷
B站的垃圾大佬，这是你吧😂 我又来捧场了
被发现了😁
Засрать рабочий шурик, а потом полоскать его в ванночке - тру вей для горе-дриставраторов.
в
One drill unscrewing second drill😅
从啊B来的，嘻嘻
感谢感谢🙏🏻
Обман это видео
this is india youtube meta, giving good likes to those scripted videos, imagine restoribg something that is burnt to hell and still running, and take note scratching surface which is unnecessary
ª
Please stay in India dont go west there arep already too many r#g heads here
1233
Qeydff
Baba how you run a baby bear from a Lamborghini.Banana hubby bubble gum bubble gum boom boom boom boom boom.Bob
Hi bro can you send this drill machine to me please i subscribe your page bro plz