Programming The New PCM To My Car WITHOUT DEALER?! This BEAST MAZDASPEED6 Is So Close To Running !!
ฝัง
- เผยแพร่เมื่อ 29 มี.ค. 2020
- Troubleshooting my mazdaspeed6 , we program my new ecu and keys without the dealer ! Guys we are close I can feel it !
Really hope you guys enjoy the video . MAKE SURE TO LIKE COMMENT & Subscribe
💥Programming cable to buy:
www.amazon.com/dp/B01F0GVBWY/...
💥Computer programming software:
forscan.org/download.html
----------------------------------
🔥FAN MAIL🔥
SPOOLING UP PERFORMANCE
PO BOX 223
LANCASTER, NY 14086
‼️Make sure to check us out on Social Media‼️
🔹IG: @SpoolingUpPerformance
🔹Facebook: / spoolinguppe. .
‼️ 👇🏼 MAKE SURE TO CHECK OUT OUR TEAM 👇🏼 ‼️
🔥PERFORMANCE DESIGN & FABRICATION🔥
Facebook:
/ performanced. .
Instagram:
@performance_design_fab
🔥My Tuner FREEKTUNE🔥
Www.Freektune.com
Engines:
🔥Speed Performance🔥
www.speedperf6rmanc3.com
Instagram @Speedperf6rmanc3
🔥For All Your Performance Parts🔥
www.Edgeautosport.com
🔥Damond Motorsports 🔥
Website - www.damondmotorsports.com
IG: @Damondmotorsports
Facebook: / damondmotorsports
🔥A Solutions Auto Parts🔥
My One Stop Shop For Part Outs!
Facebook : / asolutionsauto
Instagram: @Asolutionsautoparts - ยานยนต์และพาหนะ
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 6](http://i.ytimg.com/vi/CVUx09Rx0-M/mqdefault.jpg)
Honestly man, you are fighting a fight that is not only good, it is gallant. Someday, long into the future, people are going to have the exact same problem you are having, and they will find these videos. Your toil will be the reason why they are able to fix it instead of giving up and letting their car waste away. What you're doing right now is for the culture, for car lovers present and future. Don't give up until you find and fix the problem, we're all here waiting to cheer for you.
Man that comment made me feel really good ! It’s fans like you that make me keep going at it ! Thanks so much have a badass day !
@@SpoolingUpPerformance You're still killing it, man. Keep doing what you're doing.
Well Said Sir!
Really good comment. Lots of passion. You're videos helped me fix my 2012 scion.
Yo, why is this dude right, im flipping an 05 durango and had to replace ecu, this is the video im using 😋
Just now starting to learn about tuning up my Mazda 3 and so hard to find any Mazda car videos and steep learning curve thanks for this video!!!!
You got this man! I hope you get this issue soon you’re so close
Keep digging u ll get to it ..never give up for all the Mazda community and all cars enthusiasts alike I'm sure they re watching and all have something to learn from this huge nerveracking issue 🤯👍
Thanks a lot !
Good luck guy,cheering for you Have similar problems with my Dodge...I won't give up yet on mine, Don't you give up either!
Yea man hang in there, you’ll get it figured out!! Got the Odyssey PC680 side mounted and going!!
Great work
Keep going browski you'll get it running
You got this brother!
Had the same problem on my 2010 Mazdaspeed 3 it end up being the fuel transducer wouldn't stop once in awhile to get a pop from the exhaust replaced it was perfectly fine after that
Thanks for the info! Very helpful
There's light at the end of the tunnel bro! Keep at it!!!!!!!!!
Excellent video. Thanks!
Awesome thank you for sharing this❤️
Keep at it man! exciting to hear compression during the last few cranks.. my thought is even if you were cranking with no fuel or spark the motor should sound like its compressing air right? other than the last few cranks it didnt sound like it should, sounded like the cylinders weren't compressing like when we do a compression test.
I know everyone has an opinion.. mine is i still would be looking at the cams and timing.
The reason as we know right now for loss of compression is from fuel washing out the cylinders. Timing is 100% on verified 4 different times with all timing tools in place with cylinder 1 at TDC . Crank bolt , crank pulley pin and cam plate
Hopefully on the right track! Keep grinding!
Thank you so much
@@SpoolingUpPerformance i want to do something to do something to my Mazda premacy 2015 i would like to her about it what i need some ideas from you 0 to go at it
You was able to reprogram the pats and vin to the new pcm? I thought you couldn't do it with forscan, I thought you needed that $1200 reader and that ids software. Can you please explain. I want to buy a used pcm to replace in my fusion.
I wait for the videos you make to come out i check everyday man. Realy want to see it rip!
Thanks so much ! I can’t wait to give all of you that excitement when it does !
Yeah for sure brotha! There was alot of hope in that video. Have tried to help a little. The injectors is a good place to go from now in my opinion it sounds like shes trying so hard to start for you man! Good luck!
I'm having the same issue after an engine replacement.
gonna check spark and compression this weekend but had a question.
The camshaft lock plate i got from edgeautosports only fit one way with how the cutouts are on the cams. I assumed I didn't have to bother to check that it was tdc at no1. was that a mistake? I know I should've double checked but I was in a hurry when doing the timing.
Keep slaying those gremlins! I swear it would of been that fried computer. Jeez.
Andy Nelson me too ! This car is putting up a hell of a fight
U going to get it u know These cars are finicky that is the word of the day lol🤣
Did you have to get a matching pcm part number in order for you to program it to the vehicle using forscan
check the exhaust camshaft, it burst for me and had the same symptoms.
Fight the good MZR fight brother!
Thanks!!!
I have a 2010 Cx9, and I'm having the issues, same as you. I got two farbs programmed. Immobilizer needs to be removed in order to start it. I had one transponder key, but I will get another key
Great video. So did you figure it out?
That's how my car sounds every cold start but that's from running e85, I just have to modulate the throttle the first 3 attempts lol
With that much fuel in the oil I would take the HPFP apart and look at the O-rings. I replaced mine a couple years ago and my oil changes stopped smelling like straight ethanol. It still has some fuel mixture but from my understanding you can't fully get rid of it with these motors. I haven't logged on to MSF in a long time to see if that changed but that was the consensus when I no lifed that forum from what I can remember. The only other things I can think of are spark plugs, coils, MAF sensor(and wiring), and/or injector seals with how that compression test went.
You got this tho! It's getting closer every time it sounds like.
Thanks man ! I have a rebuilt hpfp on the rx8 for mock up that’s on its way back up to swap out with this one . Then I’ll rebuild this one with another Rey’s Mazda Parts E85 oring kit
Man! I have been trying for over a month to get WDS to work to allow me to do exactly what you're doing here!
Hi, which software are you using for programming the PCM? would be great help if you could tell me about it.
@Spooling Up Performance I ran into an issue similar with your crank position sensor. I had actually bolted mine on backwards which put it off by a whole tooth. It should be the 21st tooth not the 20th so you may check that it is not needing flipped around! Like you said it makes a world of difference as each tooth is like 12 degrees of timing or something crazy like that. Let me know if it’s correct or not and hate that your having a bad time with it man!
its definitely the 20th tooth.
Is there a write-up about programming a new pcm to the vehicle?
Bro I know you are trying the best to make that ride run but have you consider stand alone management yet?I hope it starts soon good luck man keep it spooling.
I would love stand alone management lol Kust focusing resources towards the Rx8 right now
I need to reprogram a 2012 Chevrolet Cruze BCM that Now has factory fog lights and switch. Can u help
With reprogramming ?
Thanks
Could I use that software and cable if I bought one to program a junkyard PCM to my car?
Boosted_Juice187 sending much love I cant wait till this thing starts again
Hell ya !
When I changed some parts on mine, it decided to not start. After a lot of trouble shooting I found out tons of fuel got into my oil. Still no idea how it got there. But after I changed the oil it started right up and ran just fine. Just had to change it every hundred miles or so until I was sure no more fuel was getting in, and also to make sure it rinsed all the fuel out to not prematurely wear out any seals.
Very good call , I will probably do a few oil changes after I get it running
I think winter gas and winter starts cause a lot of the gas in the catch can. I usually get gas in my occ in the winter.
any results on forscan, able to reprogram a pcm,ecu. looking to purchase junkyard brain but not sure if my software will work
I have not watched the video yet but I heard you mention Mazda I have a 2010 Mazda3 won't let me program the key with autel 908 pro ,
did your were able to program the VIN number
Ok got a question, because getting my 05 Jetta computer flashed for a reasonable price so I want to learn how to do what you are doing in this video, from what I have gathered though is VW needs a login code, is this true and how do I go about getting said codes
If you had fuel washing the cylinder walls could be temp sensor related (had a couple of cars do the same for customers).
Also since there was sooo much fuel try spraying a bit of oil into each cylinder to try and raise that compression back up.
See I freaking thought that temp sensor was an issue ! I found a broken wire on it
if you have to exact and same truck and transfer from the one is working to the one is not working your think is still need it programmed
Where can one get mazda 6 computer box files if I may ask? Thanks
Any way to get the asbuilt data for a Mazda speed 3 2007 year
Good afternoon,
I recently installed cruise control on my 2021 Isuzu D-Max 1.9L standard model and I need a device that can program or activate it. I've tried using an OBD2 ELM327 WiFi and ELM327 HS LS USB for scanning, but they can't seem to recognize my Isuzu D-Max. Now I'm considering purchasing a dedicated device or using the TOAD program or should I buy IDSS . Could you please recommend the best option?
Looking forward to your reply.
Thank you for your assistance.
Best regards,
Tell me what do you think
Check out Mazdaedit software, I think this is more than what you need. Surprised you don't have it already.
To be safe you can also rebuild the hpfp seals with one of reys kits that would ensure the fuel isn’t mixing with the oil there
I have a fully rebuilt one with a Rey’s kit ready to go it’s on the rx8 down at the fab shop they are sending it up . I also have another Rey’s kit sitting here at the house that I will rebuild here after In swap my already rebuilt one
What year is the Mazda , couldn't Walmart cut it
I'm gonna replace my MS6 ECU, you mention that you going to replace the AWD module as well, it is necessary? Because I just bough only the ECU. Can you help me with the instructions to reprogram the new ECU?
You're killing the starter
Starter was the least of my worries buddy lol I was more concerned with figuring out my main problem. And I’ll have it known that same starter is in that car today works just fine!
I see what your saying but personally I had no concerns about that In the process
Check the valve timing tdc #1 cam 180 off bad fuel
Injectors leaking
I found out I may have a bad PCM. So you are telling me that with my laptop and Forscan full Windows version (plus USB/OBD2 cable)... Can I either reprogram my PCM or if bad, buy a used (good) PCM and reprogram it? My 2017 Mazda CX-3 keeps giving me a bad MAF/Barometric sensor code. I replaced the MAF OEM Mazda sensor but the problem keeps coming back after 20+ days. I suspect a bad PCM... What about the key fobs? I have been told I can buy a pre-programmed PCM but then I have to take the car (that would not turn on) to a locksmith for reprogramming keys. Would this avoid all of that? Man, I loved this video. Wish I could have seen the secrets lol.
I would start with the cam phaser and cam solenoid also check to be sure the clutch is not fused to the fly wheel. Great video keep it coming 👍.
Gotta be fuel or timing. Air is good sparks good, must be the injectors or the timing being off!!
Do it work for jeep
Does this work for Vw?
That sounded like it was flooded -- that would also explain fuel in the oil. Pull the power for the fuel pump & if it starts and dies a second later -- you have verified flooding/
i got the same problem in my Infiniti fx35 2008
I'm about to try this with my 2012 Mazda 5.. immobilizer kicked in, wonder if I can disable/reset it.
Worth a shot!!!!
Can i get that 4 scan thing for my chevy calvalier?
You can't. Forscan is only available for ford make (mazda, mercury, ford, lincoln, etc) vehicles. As far as I know there is not a free software available for any other make. However you might be able to obtain the software for GM vehicles for a price. I think the cheapest I have seen is roughly $200.
Damn I thought for sure the forscan would have worked at reprogramming the keys . Another thing you could do on top of replacing the injectors is if they were dumping fuel into the cylinders it could also foul the plugs out even if they have been replaced recently. What dose the Fuel pressure get to on the access port while key on ? And then while cranking just out of curiosity? I know you will get this figured out buddy don’t give up I feel like you are very close!!
Plugs just changed during all this , pressure was kind of inconsistent that’s why we started looking more closely at fuel after accessing this forscan program and being able to see everything the ecu sees during cranking and while sitting static
Spooling Up Performance . I’m sorry if you have mentioned this before but what HPFP internals do you have and if your getting enough pressure to atomize the fuel at start up or another common issue is the high pressure relief valve they tend to fail pretty often especially on tuned speeds. Idk again sorry if you’ve checked these things but those are definitely possible fuel system issues especially since the car ran fine then just shut off. What you could do idk if you’ve tried but pull the charge pipe off and spray some starting fluid in the intake now that your getting a burble from the exhaust you have to have spark see if she fires. However again I think your on the right truck man.!
@@StabbinWagon402 I think that's a good shout re high pressure relief valve. They do go on occasion.
Can you get your car out of anti theft lockout- no start mode?
Does Forscan also allow you to reprogram the VIN on the PCM? I am actually gonna use a VCM-II and Mazda IDS, but not sure if the PCM is able to have the VIN changed if I buy a used PCM instead of a refurbished one.
Hoping that Forscan can, cause that would mean that the IDS can for sure.
Any chance you figured out the answer? Ive been wondering the exact same thing for a while now. If you haven’t tried I’ll order it and give it a go
any results on forscan, able to reprogram a pcm,ecu. looking to purchase junkyard brain but not sure if my software will work
Finally what happened, Did you start your vehicle?
💪
I have a 2016 mazda 3. Im wondering if you can reprogram the cars computer to accept a new key FOB. Is this possible? The car has a push start button the physical key only unlocks the driver door.
Hmm should work the same
Is it possibly to fit a gen2 MS motor into a MS6?
Same motor . Just have to put the MS6 power steering pump on, MS6 alternator (difference in voltage regulator I believe ) , and a few other odds and ends . But the long block is the same
Wait, I thought FORSCAN can't write the VIN in these cars.
Did the new ecu have the same vin or were you guys able to change the vin too?
Can change it all
What setting did you use to program the vin ?
Need help changing the vin on my pcm
Are you sure Throttle body is physically opening? Fuel spark air. You get spark and fuel. So timing of spark or your not getting air?
Throttle body is opening , even swapped with a spare to make sure
Can you turn off the seatbelt chime if you are not wearing it with this software?
YUP!
LMFAO!!!!! 🤣🤣🤣
Have you tested the coil packs at all?
Yup! They have spark
@@SpoolingUpPerformance its just weird its almost like theres too much fuel that could be blowing the spark out
My car has been down since November same issue. I haven't stopped on it. So you can do this.
Thanks and you got this too!
@@SpoolingUpPerformance I did the vvt gear, exhaust gear and cam, timing chain and tensioner and all new stainless oil feedline and new oil drain adapter today.
Rip Starter...
VCM2
You will get it. In the mean time you might want to joint the "Right to Repair" movement. People are fighting to prevent manufacturers from proprietary information locking consumer goods. In other words people are tired of manufacturers going out of their way to make the home mechanic extinct.
So close, I know you guys will get it!
Thanks man !
You chose the hard way you need 1 key and a used ecu in 10 minutes job is done ecu is programed ,i do it many times
check hpfp also
Already getting on it lol I have another one on the way
suspect 1 bad injectors
suspect 2 cars engine harness
Im not going to say i told you so BUT I told you it was an injector issue, may have fuel pressure etc but if they arent atomizing properly its not going to start. Should have pulled those and had them tested/cleaned. Its an e85 thing lol
A lot of people said it Those don’t didn’t have e85 through them . The PI injectors did bit those have already been cleaned . But ya e85 is a bitch
Also, Mazda couldn't tell you the issue?
Didn’t take my car to mazda
Watching with interest from Wigan UK. I bet this guy in UK named Justin Heath knows what the fault is....
Shout out to my boys in the UK!
Timing sounds off
I’m glad you made the foreskin joke, that’s what my juvenile mind immediately thought when you said the name of the program… at least I’m not the only one
Prob stopped working because how long you hold the key to turn over 🤦♂️
Its a good time to stop once you see smoke...
prog name foreskin?
Hi
I wanna help you bu my language not very good
I'm saber from Saudi Arabia
Can you tile me error codes before you change the ecu
And there is black wire under the EGR if the wire is not connected the car is not running
Good luck
Thanks I’ll give it a look !
Who starts a vehicle for that long. Don't let random people act like mechanics around you. Keeping a vehicle stock is your best option if you want a car or truck to run. You think the professionals who created it haven't thought and tested the best way? Once you start putting aftermarket shit on it. Like that hot air intake and messing with tunes like you know what your doing will mess shit up.
100% flooded I'd say put a better battery on it let it stand without plugs and change the oil
Injectors are cheap so I'd change them too up the cc to 1000 or 1200 while your at it.
Lol cars are Sooooo much fun...
I just bought a 2009 - 95.000km base black mazda 6 for $700. Yes it need a lot of work but worth it in the end.
I believed in you. I am glad you didn’t give your car because some people did and sell them. She will be alive it just she is struggling something. Make it happen.🦾
We got this !!!! Thanks man
Waste of time , i taught this was a step by step video.
You are not programming anything I’m pretty sure you can not write codes like C++ you are merely loading up already made software. You are not a programmer I’m sure but a mechanic and mechanic do not know how to write codes
Any decent scan tool will copy PCM and write it to the replacement or you can just scan the vin and instead of accepting it you say know and type in the new one, that simple. I do it in less than 3 minutes. You shouldn't be making videos about things you know nothing about, leading people down the wrong path
You should make a vid showing the easy way to do it for everyone, thx!