Shoutout to all the guys who love fab work and are able to help you out!! I'm looking right now to get a new front mount and tossing up between custom fab work and or a new HPD kit
good job mate,its something im monitoring on mine. one day (when it does it i guess lol), ill organise with my TIG welder mate and pull it to bits and get it done in a day 👍🍻
Nice and useful video. I have a Pajero. I hope you start modifying the exterior of the car, because I think that the Pajero has a weak ability to look more beautiful from the outside. Good luck to you 🇸🇦🇸🇦❤️
When you mentioned a Pajero we don’t do that vehicle sorry mate Same here in Victoria . Try to limit how many joints you have on the high pressure side And rolling the aluminium ends to limit hoses blowing off.I have seen this before with aftermarket intercoolers kits. Sorry Dee a bit late with advice. But a great vid for new players.🇦🇺👍👍👍👍
Yeah I should have said a Land Cruiser and they would’ve helped me😂 No that is fine, I kind of knew it was a risk boosting it with no rolled ends but luckily all sorted now 😊💯 Thanks anyway!
Awesome vid. I will do this soon and so it is good to know the issues. I live in Goldy so will probs hit your fabricator up too. Just to confirm, with the hot side, you just kept with a combo of the original car hoses and some bits and pieces from your original eBay kit? Would you recommend better quality pipes/joins for the hot side rather than the eBay stuff? Cheers!
Yes mate correct it was only the cold side that needed this done 💯🔥 Honestly all it needed was rolled ends on the end of the pipes but because it gets cut you loose that anyway so I will buy the kit...buy proper silicone hoses and just get a fabricator to roll the ends🙂💯
Thanks mate. So you are saying for the cold side I should just buy the eBay hose kit (like you did), but also buy proper silicone hoses. So then I would use the metal pipes from the eBay kit (I cut and then get rolled by a fab) but use better quality silicone pipes? You reckon this will hold if get a tune like yours with 20+ psi . Or u reckon full metal would just be safer/ more reliable for a tune
Hoeveel boost pressure hardloop jy? Nou besig om my 105 series front mount in te sit maar die pype maak dit difficult ! Will kyk of ek self die punte kan rol😅
Sure budget option Is great .. but what a headache .. sometimes u have to weigh up what something costs vs what it's worth in your own time I'm not saying get someone else to do it for you, if you can then by all means, but at the least buy your car decent kit 🤷🏽♂️ it deserves it 😉
Yeah for sure definitely like that with some things like my snorkel, for example, didn't want to do that by myself but with the intercooler kit it still worked great till I got more boost haha😄 I'm loving to work on the car and build things myself hence why I did it. Luckily all is fixed now and is working a treat🙃💯
![ร้อยพ่อพันแม่ - WanMai [Official MV]](http://i.ytimg.com/vi/XY2pNYASEbg/mqdefault.jpg)
Shoutout to all the guys who love fab work and are able to help you out!! I'm looking right now to get a new front mount and tossing up between custom fab work and or a new HPD kit
good job mate,its something im monitoring on mine. one day (when it does it i guess lol), ill organise with my TIG welder mate and pull it to bits and get it done in a day 👍🍻
Yeah, it worked fine till I tuned it. Definitely, if you can get some rolled ends it will be 💯 cheers matey!🤪
Nice and useful video. I have a Pajero. I hope you start modifying the exterior of the car, because I think that the Pajero has a weak ability to look more beautiful from the outside. Good luck to you 🇸🇦🇸🇦❤️
I have done a few exterior mods haha feel free to check out some of the other videos. Cheers mate💯😜
Defiantly would buy a set if you know he's willing to make a set up
Give him a call he will do it for you💯
When you mentioned a Pajero we don’t do that vehicle sorry mate
Same here in Victoria . Try to limit how many joints you have on the high pressure side And rolling the aluminium ends to limit hoses blowing off.I have seen this before with aftermarket intercoolers kits. Sorry Dee a bit late with advice. But a great vid for new players.🇦🇺👍👍👍👍
Yeah I should have said a Land Cruiser and they would’ve helped me😂 No that is fine, I kind of knew it was a risk boosting it with no rolled ends but luckily all sorted now 😊💯 Thanks anyway!
Awesome vid. I will do this soon and so it is good to know the issues. I live in Goldy so will probs hit your fabricator up too. Just to confirm, with the hot side, you just kept with a combo of the original car hoses and some bits and pieces from your original eBay kit? Would you recommend better quality pipes/joins for the hot side rather than the eBay stuff? Cheers!
Yes mate correct it was only the cold side that needed this done 💯🔥 Honestly all it needed was rolled ends on the end of the pipes but because it gets cut you loose that anyway so I will buy the kit...buy proper silicone hoses and just get a fabricator to roll the ends🙂💯
Thanks mate. So you are saying for the cold side I should just buy the eBay hose kit (like you did), but also buy proper silicone hoses. So then I would use the metal pipes from the eBay kit (I cut and then get rolled by a fab) but use better quality silicone pipes? You reckon this will hold if get a tune like yours with 20+ psi . Or u reckon full metal would just be safer/ more reliable for a tune
@Green Yes correct just do it that way and it will be plenty strong😎
Lekker man
Yess baie lekker dat die pype nie afskiet nie🤣
I had major issues chasing hoses blowing off and ended up welding balls of weld on the ends now haven’t had a pipe blown off for 18 months now
Haha yeah definitely needed the round ends to grip on to aye💯
Do you have old parts/tubes lying somewhere, so you could get dimensions off them?
Unfortunately not mate
@@budget4x4life That's a bummer. I was hoping to find existing hoses/pipes with beads based on your project.
Hoeveel boost pressure hardloop jy? Nou besig om my 105 series front mount in te sit maar die pype maak dit difficult ! Will kyk of ek self die punte kan rol😅
Haha lekker man 💯 20psi. Janee rol hulle want die goed skiet af al is daai clamps gedraai tot hul nie meer kan nie 🤣
The guy you got to fabricate should fabricate a heap off them and put them on ebay or something, yah know what i mean ???? But well done 👏
Yeah could be a good idea actually, I will mention it cheers mate 💯👌
Yeah I’d buy one if it’s off the shelf ready to fit. About to do the same front mount intercooler mod.
what is the size of this intercooler?
550x230x65😊
I’ve double clamped most of my hoses and has over 20 clamps $200
Yeah I had it double clamped temporarily but still didn't trust it so got this instead. 3 clamps and she's off....lovit!😎😎
Sure budget option Is great .. but what a headache .. sometimes u have to weigh up what something costs vs what it's worth in your own time I'm not saying get someone else to do it for you, if you can then by all means, but at the least buy your car decent kit 🤷🏽♂️ it deserves it 😉
Yeah for sure definitely like that with some things like my snorkel, for example, didn't want to do that by myself but with the intercooler kit it still worked great till I got more boost haha😄 I'm loving to work on the car and build things myself hence why I did it. Luckily all is fixed now and is working a treat🙃💯