Do High Volume Oil Pumps Really Work? Is My 4.0 Engine Done For?
ฝัง
- เผยแพร่เมื่อ 4 ก.ค. 2024
- Been wanting to know this for so long. I had this jeep with lower oil pressure but the engine was in great running order. I show detailed steps of this process and results are surprising. Hope this helps someone and enjoy. Comment any ideas for future videos!!
00:00 Introduction
01:11 The kind of high volume pump.
04:17 How to quick fix the crank sensor.
05:10 Let's change the oil.
05:53 Not my favorite oil of choice.
09:32 Cutting the oil filter.
11:38 Let's see what it is cold.
15:56 This is crank shaft.
16:54 Miles just sound like a number.
17:21 Oil pump apart. - ยานยนต์และพาหนะ
Miles and age is just a number if you take care of things .
True believer in that .
New tire tech at work says ‘my car has 280k it can only last so long.
I showed him my 81 vw that had 300,000 miles on it over 11 years ago it’s been my daily since.
Crossed the country more than a dozen times.
You are pretty awesome man!!! I bet you'll get to a million subscribers. I hope so. You deserve it!!
Maybe one day! I hope these comments are real people and no AI bots !!
@dexjeeps no bot here. Just a redneck from oklahoma who loves older 4x4s and learning tricks so I don't have to work as hard
Dex tells it like it is! Every engine is only as good as the people working on it the day it was put together.
My 275k 4.0 doubled oil pressure with just a standard volume pump. Biggest take away is the pumps wear period and cause a drop in pressure. Great video content overall. Keep it up!
Great point! Thanks
Agreed. I think the same about cooling systems and other components. No, you dont need the dilly-deluxe fancy “upgrade”. Your jeep is just old and tired, and new oem everything is perfectly fine for every jeep 95% of the time
Thank you for posting this video
From the first couple minutes running with used oil and old oil pump to the final test with new oil, filter, and pump is a commitment to the quality content you are putting out. Props my friend. It wouldn't surprise me that the old pump just wore a .00001" on the little paddles causing it to not hold pressure at the lower RPMs and hot oil. Since you didn't find any other signs when you dropped the oil pan or inspected the filter. Keep up the great videos. Definitely a subscriber!
Love the video!
Great job Dex!
Might consider a separate video where you use both gauges, monitoring oil pressure with Fram, Wix, Mighty, NAPA, and Mobil 1 filters to see if specific filters hold better oil pressure. Could use same oil for all tests.
Another great super informative video! You just gotta stop giving attention to all the haters and people constantly trying to say you're lying or hiding stuff don't let them kind of people drag you down.
Another Great video Dex !!!
Appreciate it. Got better one coming soon!!
Man you gotta keep makin videos the world needs your knowledge
Love your content
Love your video's keep up the good work.
Great video on oil pressure issue, thank man
Glad to help!
GRATE job you know that lots of some the same problems can be fixed differently you can have 10 jeeps that are running bad and sometimes 10 different fixes will fix them you can have one with a skip plug a wire inside the distributor cap a coil head gasket bent valve broke valve springs bad plug boot bad wire to coil injector just so many things and you may have to come up with a crank sensor cooler heat shrink or just use your windshield washer to sprayer to cool it may have to run that wetter water in it and bigger tank cause sometimes you may not be able to get out to get water to pour on by yourself.....love to watch videos this is what I dofor a living also ..
Napa Gold oil filters the way to go
Walmart got the Mopar oil filter 8 bucks.
From aus here loven your channel mate have learnt a lot of things from your videos keep ‘em up man 👌🏻🤟🏻
Thanks, will do!!!
Love this explanation, seems like I may have to try a high oil pressure pump on my TJ
Got a better video in the works but definitely helps out.
My black 01 XJ with same interior running smooth again after new camshaft, lifters,rods, timing chain, tps🎉😊. Good luck with your project 👍. Mine is bone stock 😊
My 00 with a fresh milling high output pump was an absolute unit for oil pressure. 80mph for 2 hours and it would idle at 40
I used electrical tape to make sure the oil switch was always in the connector. I started moving it around and saw the oil pressure gauge in the dash start fluctuating. Oil pressure seems to read mostly accurate now that it’s not a loose wobbly connection. This video is making me wish I went with a high volume pump now, but the standard volume one is good !
Good content. Certainly seems a high volume oil pump would give better pressure on gauges. Maybe you can do very similar test on a Grand Cherokee, proving it does help.
Don’t listen to the haters! Ur videos are awesome and legit I’ve had a couple Cherokee’s a 96 4door and a 98 2 door 5 speed they were awesome
I appreciate that! Just new to all this. Learning!
when I have torn down motors from oil starvation or pressure issues its almost always cylinders the furthest from the oil pump. I am also dealing with this oil issue on a service van I have bought. Thanks for the video!
Yep. End cylinders have to get the worst wear I’d think
My 90XJ got great oil pressure until a shop talked me into replacing it when the shop was replacing the rear main seal and pan gasket. On way home from shop the pump failed and trashed the motor. The shop replaced it with a used engine, it never had good oil pressure it got about what that one did. BTW: I used that dump water on it with om 91MJ for awhile before I replaced the CPS too. That was in 99. 👍
I bought a rebuilt cherokee last year and the engine blew up on the drive home because the brand new oil pump in it died on the express way. When I mean died I mean instantly. The oil pressure tanked in less than a second and the check gages light came on and beeped at me. Immediately I pulled over and shut it off but it was too late. The motor was knocking from spun bearings. I put a different motor in it that I rebuilt myself so I knew what was in it. I used parts from Rockauto including the oil pump. The day I drove it for the first time after the swap the oil pump did the exact same thing. It began loosing pressure on the express way but not as fast this time. I watched the gage sink from 40psi to 12 over the course of 5 minutes so I turned around Immediately and started heading back. At idle the pressure dropped to 0 so I had to put it in neutral and rev it to keep the pressure up. I drove the rest of the way back in 1st gear to keep the revs up and when I got back I let it cool down. Then I fired it back up but this time the pressure spiked to 80 psi and stayed there at idle. I thought I was going nuts. There's no way I could have the same problem from 2 different motors. But it was the pump. The manual gage was reading over 200 psi and my oil filter exploded from the pressure. It turns out that the oil pump from the first motor was also from rockauto. They were the high end pumps too. I replaced the oil pump with a melling just like the one in your video and so far I've never had an issue. I'm not slamming rockauto they sell some great stuff but I'd personally never buy an oil pump from them again.
I put a nee engine in my cherokee and also put a melling hv oil pump in it and it did just like yours 65-70 at cold start 45-55 driving hot .after 3 years its back to 30 hot idling and maybe 45 -50 hot driving .so i believe it did help even with a new engine.i also had to massage oil pan .problem i had was on a steep incline after hv oil pump it was sucking pan dry and losing pressure. now i just run a extra quart in pan and everything is ok
Adding an extra quart creates maddd windage and probably froths the oil even if the pump isn’t sucking it dry.
The moral of the story is: your engine is a system.
And replacing one part of a system is a slap in the face for any engineering that took place.
Sure aint gonna last long without oil pressure though😅😅
Have to remember with high volume oil pumps that it moves more oil, so unless you have a higher than stock capacity oil pan that you potentially will starve the engine of oil because alot of the oil won't have time to flow back down from the head to the oil pan.
I don't think that would be an issue I think it would flow back
I try to avoid high volume pumps if possible. It puts alot more stress on the distributor drive gears and can wipe out the cam. Especially with a parts store chinese distributor/gear. First thing I do with these is find a OEM drive gear at the junk yard.
Agreed the material quality matters
I'm really interested in the results of your research on this experiment
Finished the editing tonight actually
Yeah man I just put that pump in my 98 and it’s a little better but when fully warmed up it drops to nearly zero psi. Keep up the awesome videos.
Also do you have some good seatbelts for a 98 you’d sell?
Nice info, the xj i have now runs around 50 after running and I never seen one hold so well till this video. Wonder if mine has been upgraded
They vary so much. Over time I want to pinpoint all the different variables. We will see.
I’ve got a2000 model just like that. It a classic. I’ve had problems with starters and clutch fan
Clutch fans are on the list
Biggest takeaway from this is to add an aftermarket gauge. 😂 Good info! I’ve heard some people say worn cam bearings is what makes the oil pressure drop, but the way that main bearing looked, I’d have a hard time believing yours would be worn cam bearings.
Who knows. I keep hearing cracked block 🤷🏼♀️
I changed the rod bearings on a 300 inline 6 Ford and it had no oil pressure before but after it had "acceptable" oil pressure lol
It was also knocking and it's still driving 5k miles later with no knock.
19:05 I just went through the same thing!
Quick question what size height and width beadlocks do you guys run?? You’re my favorite TH-camr/Mechanic man keep up the good work!
Depends. I honestly bought this jeep as is. Mostly 15x10 wheels with 33x12.50 tires but I’m thinking going back to 15x8s. We will see!!
@@dexjs15x8 way to go!
Very common issue with these tractor engines is worn camshaft bushings
What are you using for your driveshaft with that lift? I’d love for you to do a video on this topic and other issues that come with aftermarket modifications
Mine next?? I’m right next door lol
I got one for you.... same black cherokee sport. Oil stays on the bottom line when hot haven't put the mech gauge on it yet but will soon to see bc I've replaced like 4 sensors so far
So just no oil pressure?
@@dexjs sorry not the bottom the first tick mark which is like 10 psi maybe... It like yours 50 on start up but drops low when it's hot. I put a new OE oil pump own it in the first year I had it because I guess the gauge went out and it dropped down to zero on my way home one day... But still the same after almost 5 years now. I know it has some pressure but I'm lazy bc I work on vehicles all day so I haven't checked it with my mechanical gauge.
Maybe you can troubleshoot and/or work on 5.2 zj with a 44re maybe hopefully if there's any in the yard? 🤔😅
Ps my 4.0 is doing this exact thing is it ok to drive when the oil pressure is low like that everything seems fine no noise or anything just trips me out. High pressure on start up then it gets running for a bit and drops down
Just out of curiosity, I have scene your wood stove in older videos, now just the stack. Do you take it out in the summer months.?
I do. I’m very weirdly ocd about stuff in my shop.
Edit: nvm u said a few times in video & i saw it. Lol. My bad
U said google stopped filming & thats android.
I 1st wrote wondering if u used android phones to record.
However, saw the go pro.
(Havent used 1 before, so idk what playform it uses.)
Do you believe in oil additives like Lucas oil products or marvels mystery oil?
I think it starts in the pump and goes to other parts 🤔 THAT WHAT I THINK .
Working on new video with better answers.
Always heard on jeep 4.0 u lose pressure in the cam bearings .dont know but my old engine had 5-10psi oil pressure at hot idle .mains and rod bearings looked good .but cam bearings were def worn .i dunno i def aint no mechanic though
I’m trying so hard to pinpoint that but I got so many things I’ve heard too.
@@dexjs I use Mopar filter are those still good or is mobile 1 better ? Got 98 xj.
had a beater 98 that held 1 psi on a manuel gauge ran it for abt a year never changed the oil jeeps still going
I just don't believe that at all
What oil & weight do you recommend for a 4.0
you couls use rotella 5w-40
Oddly enough when my crank sensor acts up I just unplug it and plug it back in at the top of the engine near the cylinder head and valve cover and then it starts working fine again, I've been doing that for years.( It only gives me problems when I've left it parked for more than a month....)
Where is your shop I didn’t know you live in Tennessee
Bethel Springs, TN 38315.
That’s where all the jeeps are?
How do you keep track of all the titles for the jeeps? haha
Haha. All by year and what I’m gonna do with them.
After about 2 hours of driving in mine with the 15w40 when I come to a stop and idle I drop to zero oil pressure but when you tap the gas and start to move it builds 20psi right away
The stock gauge is totally inaccurate
Uncle Tony showed his XJ reading with no sensor even connected.
@@fastinradfordable right I’ve yet to put a manual gauge on my XJ and see if it’s reading what the gauge says but I think it’s pretty close due to the conditions being the same every time it happens
America 🇺🇸 💪🏼🛠️
Miles don't matter on an engine kuz you can put 200,000 miles on a motor in 3076 hours @ 65mph. But if you idle a motor for 3076 hours, even if you change the oil every 3000 miles on the 200k motor and every 500 hours on the idling motor, the 200k motor will be in MUCH better shape than the idling motor.
Very very true comment. I can’t get that to etch into peoples heads. Just miles..🤦♂️
My Cherokee reads 40lb all the time. Idle or rpm. What should I make of this?
Just put gas in it !!
Do you ship parts
How much u asking for that jeep?
I'm not claiming to be an expert but most of the time in my experience low oil pressure is from cam bearing wear
Jeep calls for idle to have 13psi.
Jeep or the Haynes manual?
I'll do it on my jeep an let you know after driving mine for awhile it drops down to 15psi maybe lower I put thicker oil in it an it was the same after awhile of driving I'll see if this pump will help me out but if not, dex come buy my jeep I'm in Indiana bring 2k with you... but I'll let you know
Dex what’s your favorite oil for a 2000 jeep Cherokee 4.0?
use the cheapest oil you can get and change it more often, I use rotella 10w-30. a 5w-30 or 5w-40 would be good too
I use 15w 40 rotella used it for years stuffs great
With getting technical any “diesel” oil is what you should be running. Or anything with zinc.
Just put that 20 something dollar good zinc adative in there Seems to be running better than the engine restore I usually put in Thanks for the zinc tip I found on another video their dex👍
Did you change the rear main seal as well?
Yes of course being that close 💪
@@dexjs could that have helped pressure?
So what wrong if my jeep runs at 10psi or so at hot and like 30psi at 2k rpm. Its been doing it for 100k miles and bearings look good when i did rear main.
Bad sensor?
What’s your preferred oil ?!
I’m a left lane driver
Who is to say that a new high volume oil pump only cures the problem of a worn stock oil pump??? Maybe a new stock oil pump will make the same difference??
I'll never use a Fram filter. Trash, utter trash. Lost a 4.0 to one of them collapsing.
I only use wix or mophar. I had the same experience with a fram coming unglued and causing a blockage like you.
@@lincolnbliss4885 Had another friend that was noticing very low oil pressures in his truck. He was out of town and thought to just change the filter as I told him the FRAM filter sucks. Changed just the filter and oil pressures went back to normal.
Volume doesn't equal pressure.its gpm is higher not the psi.same idea behind a commercial pressure washer at 900psi vs a cheap one at 1500psi.the commercial will flow more even at lower psi
I get that argument but I feel there’s a lot of variables to account for.
High volume shouldn't help low pressure