I've been in this inkjet business for almost 30 years now. This is the BEST I've heard on printers!!! Jose, you have just successfully UNCLOGGED my brain!! Thanks!
Good message Jose. From your recommendation I have committed to printing from my Cannon Pro10 once every 60 hours or less. This has made me a better printer. I am getting my prints right the first time now (most of the time). It also makes me a better photographer because I now feel I need to go out and photograph at least once a week so I have something new to print. This has been a better investment than a new lens or camera.
Great advise! I used a couple of years to decide to buy the Canon Pro 1000 due to the fact I knew it would take commitment both money wise and actual printing. It also took some time to accept the printing costs. But when you do; its the best hobby! Holding a printed picture you are happy with, is next level!
Starting almost twenty years with an Epson 1290, it´s been a long and steep learning curve for me, and from my experience your advice to beginners is spot on. I think your videos are amazing.
This video was an eye-opener for me. I was considering getting one of the pro printers so I can print from home and negate the need for a lab. After seeing this video, I changed my mind. Yes labs are expensive, but so are pro printers! Thank you Jose
Having said that, I just received my prints from an international lab, and they were (slightly) damaged during transportation. Now that I am more aware of pros and cons of each option (lab and home), I might consider home printing again but only after more thorough research.
Thanks for the feed back! The person who wrote the code to this program is also supposed to be working on a windows version. Don't give up on the cat just yet!
I just discovered you. Great video! I followed the path you described, exactly. Had no idea what I was getting into when I bought my Epson 7890 (24”) beast in 2014. Found out quickly about color management , inks, papers and canvases and heavy duty cleaning. Now, I use only the best and most expensive supplies. I was shocked to learn that I could spend $1200 for a full load of ink, that I didn’t need anyway. But luck fell my way and in six weeks earnings had covered the initial outlay of $1850. Now it will cost twice that to replace it. Today, I have over five years on that printer and it is still chugging along nicely, fingers crossed. I thought I was starting a photography business. Now, years later, I consider myself a professional printer and still an amateur photographer. But, printing pays the bills for my hobby. I will be following you on TH-cam. Thanks.
Bought half-pro Epson 8550. I was ready for what you said before I found it, just by "thinking in advance". But not everybody is technical person, so your rare advice can be a real treasure. My case contains two factors. 1. I had no more time time and patience for "trial and error" with another and another labs. 2. I'm in camera club. There is no problem for me to have some job for my printer three times a week. And if I need longer journey, i have few people in my city, to whom I can give my printer to take care. Care not by nonproductive "clean heads" prints but to make pictures. Not only I can print like I need, but also provide perfectly consulted prints for others.
I also am in a camera club. That is why I am looking for a printer. I print a lot to get it right. If I had a printer here I could do a small print first to see if the photo is printing correct. I am tired of running to the lab and I don't have time to wait for photos.
Thank you for this video. I just bought the 1000. Thankfully, I've been a hobby artist for 4 years and have over 100 paintings laying around that are quality to make prints, my online audience has expanded over the years too and I plan on going to local art stores shows to sell. I'm so happy with this printer and I can't wait to dive in to it!
1. No problem if you have money. 2. This is for people who are serious about art and photography. Once you take your profession serious you'll realize this printer is no problem at all. If you want a printer for documents etc etc. Go get a toy printer.
Just starting with the same printer (8180 in my country). I US you have Color Precision pigment ink set available, as Jose have mentioned and even hosted this set's author on his channel. In Europe, one company from Austria provides very same prpduct + service. Six pigment inks plus ready-mwde ICC profiles for most of papers made by three most popular brands and for their brand papers. Farbwerke - worth to try unless you fill ypur Epson with mix of OEM hybrid inkset. Worth every panny/grosz/öre/eurocent spent.
Wow! I was considering making a sizable investment into a Cannon professional model printer 🖨 and of course before hand 🖐🏻 I watched many TH-cam videos on the subject of different models and testimonials and LUCKILY came across your video on this very subject. Not only have you Sir saved me a sizable amount of money 💰 but many hours and Aggravation!!! Well, needless too say I decided against buying the Cannon but will instead purchase another Prime lens. I never even considered all the maintenance and after thought in owning such a high end product, thank you. I’m a photographer, that’s what I do! Printing is an afterthought. Being a photographer I’m away to various parts of the world 🌎 often and for extended periods of time, and since I have many expensive photography related items in my home I never would even consider too have a neighbor enter too run a maintenance on a printer 🖨 .... So! Bottom line - No Printer ( lots of💰 time & aggravation saved) add a Prime - Thank You 🙏🏻
How cool! What was your favorite beer? Do you think it is possible to print a photobook with the canon pro1000, or is it more just for fine art prints? All my best
Thank you Jose. Lots of food for thought. I live in the mountains, two hours from Panama City in Panama. There are labs in the city, quality hit or miss, but uggh, at 72 years old, uggh, the drive. We do have the local equivalent of UPS here, it may make it reasonable to use a printer in the city. If I order from the States, the consistently-high-quality prints would come right to my door, but with a two or three week delay and a lot of international shipping costs. I would like to start selling my prints. But at the moment I have zero customers! Although I am salivating over the Pro 2100, I'm thinking that home printing, with all the pampering, may have to wait until I have a larger client base. I may just have to figure out the logistics of using a "local" lab. Alternatively, since I want the "fun" of being married to my own printer, I guess I could plan on printing a couple prints per week to build up an inventory even though I don't have a customer. Even if I eventually sold one out of every couple/few that I printed, it might be worth it. So many variables. So many options. So many compromises. Yup, just like being married. But I wouldn't have it any other way. Your opinion would be greatly appreciated. Thanks again for this great video. Saludos.
Thank you Jose. We're in Lockdown down in NZ I'm just about to buy the Canon Pro 1000, your information gives fruit for thought I've had this Canon Pro 9500 since about 2003. Used it for printing building drawings just use a drat to save the ink and of course photos. My understanding is it is night and day the quality in the difference of the printers. Advantage of the pro 1000 I would have is I can print A2 for the drawings plus the quantity for photos. So I need to print a 4x6 print every second day. In our lockdown Ive been making picture frames from demolition native timber(we're not allowed to cut Native Timber any more, which is great) also been using farm fence battens native and there is a rustic look to them. They really look cool You've given me fruit for thought that for sure Cheers
I thought long and hard about the switch to precision colors for my pro 100. Over 90% of my printing ends up bound in books for my own viewing pleasure and sharing with friends. Fading is not a consideration and the cost is an extension of my photography hobby. Any prints I display get changed as new images come along to compete for wall space. Maybe the fascination with 100 year archival quality is over rated for home printing. So far my pro 100 seems remarkably tolerant to neglect, with 2 or 3 week printing holidays and no clogs. Its a wonderful machine.
Stop worrying about that! Of course inks that cost 1/8th of OEM will not last as long before physical fading is noticed. Albums will protect your prints for decades!!! I have about 20 prints I truly care about. They are darkroom silver prints!!! The digital ones can always be reprinted. Most will outlive me! Even without extra protection! And by the way I have several thousand prints! I am going to have to do another video on this subject and hopefully clear the air about this once and for all but I highly doubt it.
Hope you plan on only using OEM inks. Be aware there are no refillable carts with auto reset chips. Single use chips are available but cost about $10-12 each you add ink and well, it does not make much financial sense compared to OEM.
@@cheo1949 Thank you. Yes, I am going to use OEM inks. I will print every week on a 4x6 size sheet to help conserve ink and prevent clogging. I plan on saving the 8x10 and 13x19 prints for my "best" work that I feel warrants a bigger print. If you feel like another approach at saving ink costs would be more effective I would love to hear your thoughts. Thank you, and happy printing!
Thank you for this. I try to tell people this all of the time. I am a photographer. I do not have a home printer. Even for my test prints, I use MPIX. There is no good reason for me to own a home printer when a lab is so cheap. I have done the math and I cannot print at home for cheaper than using a lab. Way back when the Epson R series was new, I had a home printer. Not anymore. I wish people understood why this is really not a good option for someone that is not printing and selling multiple photos per day.
I have a Canon Pro9000 I bought about 5 years ago, and hadn't turned it on for about a year. I figured it wouldn't work and I'd finally have some extra shelf space when I tossed it. I didn't feel too bad as I didn't use it much and was planning on farming my printing out anyway. To my shock, it printed perfectly!
Solid Advice. Thank you. Your delivery is so good and honest. Based on your knowledge I will not be trying to print at home and will be having my high-end digital images printed out of house. Any advice on what service to use would be most welcome. I photograph in color and black & white. Have a great day and hello from Rochester NY.
Very informative. I have a couple of multi function inkjets. They are generally used for text an copying black and white documents. When I do want to print images, I find I generally have to run the cleaning cycle 4 times to ensure all nozzles are clear and the printer is functioning optimally. Your video makes it clear I have to think carefully about how I would use and maintain a dedicated photo printer like a CANON ProGraf 1000.
That's the idea. Every single day I read about printer owners who had not idea what they were getting into. I've had plenty of successes and plenty of regrets. Just trying to keep others from the same regrets I've had to deal with.
This has been a good informative video for my consideration! I am looking to get into the print business, and looking for it as a business venture than a personal one. Talking to a few local photographers in my area, there is a definite demand for prints, on various media. I expect a printer to be printing daily
Thanks a lot. I was thinking about buying another printer or buy a new print head. I will continue to have 'my' Printer' print my photos. It's a two hour drive to the Printer.
Saw an Epson printer at an e-waste place, picked it up for $90. not a good investment, the print head was totally clogged and nothing I did could remedy it, and I wasn't going to pay upwards of $1500 for a new print head (it was the Epson Stylus Pro 9890). I salvaged all the motors and boards out of it and put the whole thing in the dumpster. This was 2 weeks ago. Last week we got a HP Z3200 44" from an ebay seller, local pickup, for $300. Needs a new carriage belt which should get here tomorrow. This should be a much better deal. The inks are cheaper, the heads are easily replaceable and not all colors in one unit either. Wish me luck :)
My printer requires a cleaning cycle every time I turn it on to print a shipping label. I need a new set of inks about every 5 photos I print. Holy expensive printer. Such tiny ink tanks too. 3 complete sets of ink, and I might have a total of 30 prints out of it. Never noticed a clog though.
As a photographer Iv'e been printing for 25 years I use a Pro 200 for pro printing at least once a week maybe make a 6x4 just to keep it happy and it gives me no trouble but expect a yearly ink cost of at least three to five hundred maybe more, if that seems a lot you probaly can't afford it. I have several others and a Canon MG5750 for general office work and print half decent photos on it with third party inks, seriously.! but they will fade unless you put them in a box away from light. Printing does not have to be expensive there are plenty of used printers out there for not much money. Buy matched inks and papers from a trusted supplier and stick with it, don't mix and match or you will get into trouble. My next purchase will be the Canon Pro-1000 but at five hundred for a set of inks, they are expensive and I wouldn't dream of using third party inks on anything but a cheap A4 jobby I learned my lesson the hard way.
Thank you for taking the time to reaffirm this hard truth once and for all. I was just considering buying a new print head for my petrified Pro-100. Question... for those of us who want to make occasional prints in home and are simply unable to keep an ink jet happy, are you aware of any laser printers that do a respectable job? I am a "B&W only" photographer who would gladly sacrifice a little quality at this point in return for a printer that doesn't mind sitting idle for extended periods of time. I keep hearing about newer "image quality" laser units being better than expected on good paper, but it's tough to find working floor models anywhere to get a sample print made. Just wondering if you might have any insight? Thank you for sharing your knowledge with the world, wishing you the best.
Thanks for the video. Appreciate it . Its an eye opener. I hardly give my time to edit photos, forget about printing. Let shutterfly take care of my prints.
such a good lot of advice. My only fear is that today's generation won't wait 17 minutes and 46 seconds to get it. All the reasons you describe are why I use a photo lab for printing my photography instead of doing it at home which would be so much more expensive per print. Keep it coming...
Young people do not tend to print. Internet is the way. Its when they grow out of that mentality that they learn that the slow methodical way is the best. Short attention span runs rampant.
I realised this when I was buying a cheap printer, the ink dries out and it also depends on the climate you keep the printer in . Not to hot not too cold . I work for a company who fix printers and it’s the same issue all the time , the users don’t know how to keep their machines running . That’ why businesses are using laser jets instead , it’s powder that that gets charged and melted on to the paper and that’s why you can keep them longer without running . But they are not made for photo printing …
I wish I were watching your videos on a 5 hour earlier, now I'm already acquired pro 1000 I visited the reflection between 300 and 1000 model, self-reflection that the ink cartridge size is bigger and probably more reasonable because the previous home printers have always become stuck and one of the colors has run out when I printed the bigger picture. I hope I came up with the right choice. The campaign price of 1000 euros attracted the choice.
I was hoping to get a Canon pro printer and was comparing the 10 to the 100 a few months ago. That's how I found your channel. I decided to wait. I definitely want to get into home printing eventually and will actually probably get the Pro-1000. But I'm waiting until I can pair it with a desktop computer (an iMac preferably) that can be on all the time to run scheduled prints every 2 days to avoid purges, and I'll also be wanting to hook it up to a backup power system so in the event of a power surge or outage the printer will never ever ever lose power, yet another trigger for a purge. I'll also probably do Prismacolor refills, but that's another big decision since I would rather use archival-quality inks that last as long as possible. But then there is the domino effect you've spoken of regarding every time you change a cartridge the whole printer does a purge, so… Refilling two sets of carts to switch between may be unavoidable. Your channel truly is so valuable. I've learned so much. Apart from putting me off, it's made me want to wait until I can do it RIGHT.
Just so you know...we now know there is no way to disable or avoid the Auto maintenance cleaning cycles. They will occur as needed whether you print or not. Printing will not prevent them. In fact it is printing that creates the need for them. Residue is produced inside the print head during printing and that needs to be flushed out periodically as needed and detected by the printer. Do not use compatible carts on your Canon printer. If you must refill..only refill your original cartridges. Watch more of my CANON printer videos for all the info concerning that. I have video playlists for each printer.
Was looking at Pro-10 and Pro-100 but after all this, I saved a lot and got XP-15000....Wife can print photos for house and I can do my oversized prints for airbrush stencils and copies of my other artwork mediums...being able to test my 11x17 true to size prior to making a mistake will be amazing
Jose, I’m glad I found your channel, it has helped me already. I bought a Canon pro 10. I have quite a bit of family prints that I want to make, most of them smaller prints, 8x10, but mostly 4x6 or 5x7. What is your rough estimate of the cost of printing your own prints, compared to a online pro printer like MPIX. Using OEM paper and inks, do you think it’s 10% more expensive or 20% more expensive (or more) to print your own prints? I have printed some with the pro 10 and I am very happy as the skin tones are even better than what I’ve gotten from online pro labs. Thanks!!
There is a very good print cost comparison between printers at the RedRiver Paper Site. It will be much more expensive initially due to the cost of all the things you will need to really produce top quality prints. Printer, Inks, Monitor Calibrator, Equipment to produce custom paper printing profiles. But one you get set up and you are able to print consistently with great results, it will be much more reasonable. Instant gratification and the ability to instantly be able to reprint something after a slight adjustment trumps any savings you might get from an external lab.
While I do print photos since I had photograpy class, Im an animation student, I got a brother t710w all in one for documents and scanning my drawings it did the job really well never had a problem till like recently, 2yrs after usage my colors are off just refilled my colored ink tanks and it fixed it and the inks are only 20 usd. I print for fun so I never had a need for fancy printers plus I never needed to print beyond a4 sized photos or artworks.
I just came across your video about maintenance. I am considering the new imagePROGRAF PRO-300 - so I will be sure to contact Canon before I purchase it. My main purpose is to make art quality prints of my watercolors paintings and I like the ability to print 13 x 19. I contacted the third party ink supplier I use for my little Canon Pixma, and they said they won't be carrying the ink cartridges for this model. SO - I already knew I'd be getting Canon ink. Thank you for your information -
As always, you’re the one for printers! Thanks for your video. I do understand why my office printer is so long to be ready when I use it from times to times ;)
Too late for me. I started out in the dark room, many years ago, making prints and I've had high-end Canon printers for the last 20 years, most recently the pro 1000. Is it without issues? No. Is it cheap? No. Is it a lot of damn work? Yes. But I wouldn't give it up for a million dollars. To me, the print is everything, and to be able to go out and take a photo, be excited about it, and come home and print it, mat it, and frame it, or print up a series of greeting cards for my small gallery, is worth every penny.
I work in a lab, and sometimes customers tell me they're thinking about a home printer. I just pull up the epson ink cost calculator app (by epson, so add about a 3rd to prices to get the real ones), and show them how they'd be paying more in ink alone in some cases, compared to the prices we charge.
I hand clean my Epson R2400 with paper towels, swabs and alcool - running the cleaning cycles without this hand cleaning of the jets and other parts will only burn ink like crazy. I use the CIS kits for ink, huge savings. All-in-all it is an expensive process no matter what you do. If you use dyes instead of pigment, it is cheaper but less resistant to UV.
You shouldn't have to be doing so many nozzle cleanings on the R2400. If you just print at least two to three times a week you will avoid having to perform any other kind of a cleaning process. CIS units can also introduce ink delivery problems if not height adjusted perfectly.
That hum that i was talking about with the other video isn't present in this one. The audio otherwise is really good and clean. With the youtube stats, you can turn down the gain on the microphone 3db and it'll sound the same except with a slightly less noticeable noisefloor. This was really helpful. I'll just send prints off to print shops for a while.
I considered to buy a pro1000 but after watching a few of your videos i decided to dont buy one. Luckily i could afford one but that would be wasted money, i would use it far to rarely. Thank you Jose and greetings from Germany !
@@cheo1949 would you kindly happen to know anything about canvas printing, the best type and printer to use...best printer and cheaper but good quality as well... I'll appreciate
Any 13" and larger PIGMENT ink Printer CANON or EPSON will produce the best results. Most CANVAS is Matte so you need a printer that uses MATTE BLACK ink NOT DYE based inks.
Using my MP990 ONCE a year. Just doing a MANUAL cleaning of the printer head. Perfect! (But that one maybe are not a HIGH end machine). Also old. Although, having problem with the sponges that sucks up the ink to the ink-waste-tank, old ink on them and sticky and get stuck on the printer head, so have dismantled the printer and they lies in water/alcohol right now. Looking on a way to remove the auto-cleaning, he does 3 of them, in 5 min... unnecessary and wasteful to overdo it. Manually = better.
Good advice. Do you think that the epson ecotanks are any good? Some use 4 colors only another one uses 6 colors. I know that they are inexpensive to use, but with 4 colors will they print quality photos? I don't need more that 8x10 prints.
I used to warn my customers about these same issues for home & wide format inkjet printers. It is a known design flaw with all inkjet printers. You waste money by using your inks to purge and clean their nozzles because they clog so easily if they aren't used often enough. There are alternatives for wide format and even large format printers from manufacturers of laser printers. Much higher print yields compared to inkjets, faster print times compared to inkjets, lower overall cost of ownership, no cleaning cycles that waste your toners, and they can be left unused for months or years without clogging as there is nothing to clog. Need to print white, metallic colors, foils, dye sublimation, holographic effects, clear coats, UV security toners, florescent CMYK colors, and more? Laser printers got you covered.
@@Interactive-Tech Go with a Uninet iColor laser printer. Wide format laser printers yield excellent results. I believe that type of printer handles pages up to 11x17 or 13x19 inches. If you want to be able to switch toners on the fly to a unit that has 5 color toners (CMYKW) plus offers metallic looking toner, dye sublimation toner, clear coat protective toner (also used as a spot color), security toner (for making IDs, passes, tickets, etc), florescent toner then the iColor series handles it all in one machine. TH-cam has lots of videos covering these types of printers.
Hi Jose. I have been binge watching your videos as I wanted to learn more about ink jet printing. I have one of those all-in-one printers Epson XP530 which I use to print on their photo papers (A4 and 10x15 cm2) from time to time but nothing dedicated yet (been eyeing Canon Pro 100s). In any case, I would like to ask for your advice about a good solution on storing prints (as there is a limited space on my walls :)). I have seen A3 boxes by Canson which comes with 20 sheets of glassine. Is that the way to go? Whatäs your take on this? Sorry if you have covered this in one of your videos, but I can't seem to find any.
Thanks for the honest and great insight. Truly appreciate it.... May i ask you, how do these TONER based printers perform, in terms of clogging and maintenance, especially these high end color printers like Canon iR C3120. I have seen their color reproduction and print quality is pretty professional level.
Precision Colors says in his review of the Pro 100 archival quality is "largely a non issue if the correct papers are chosen. Using swellable papers like HP Premium Plus or Ilford Galerie line puts this pretty close to the pigments. If 50 + years is not enough well then move onto pigment inks." Would it be suitable using PC inks and aforementioned papers for photo exhibitions?
Most good printers have a spitoon unit, what this does is allow the printheads to clear there throat before a print and also if they have been idle for to long, most printers also run cleaning cycles without you knowing, they automatically do this before each print as well as pass over the spittoon, they other clever thing that the high end printers have is a drop detect sensor, this checks each nozzle through an LED array & it finds a high ratio of a particular printhead with nozzles down, it will purge that particular head and also complete a cleaning cycle, although i agree with this video in the main. Most modern high end printers today are designed to counteract low volume usage by using the methods above.
Sort of. I like the terms you use. But it is a color channel and not a print head. The print head is the complete unit. Printers do utilize built in safe guards to "Save" the unsuspecting user who knows thing about inkjet technology from the mistakes of not printing often. Purge pad, not spittoon although it is a pretty close description.
So isn't that the purge pad??? Where the print head gets pre primed before a print job begins. That rectangular unit consists of a ceramic porous "Sponge" sorounded by a peripheral sealing gasket to allow the peristaltic pump to apply vacuum to the nozzle plate so the print head can be successfully cleaned. That then channels the waste ink generated down to either the internal waste ink pads or internal user replaceable waste ink cartridge or tank depending on the printer modle. Sorry but that Wikipedia source was horribly written and I still can not find the term spittoon on any of my dozens of official professional photo printer service manuals I own. Maybe that's what you repair guys call it but I don't think it's an official term.
This is very true in 2019. I got a Pro-10 for free from Canon. I haven't bother to set it up yet because of all the reasons you have mentioned. I can't even sell it for $100. A $600 printer sitting in a box LOL. I just have no time.
Excellent video. My Pro1 still in box as I await a chunk of time to get it set up and learn to use it. I reckon some people could benefit from your relationship advice too :)
Hi, You are saving lot of people money - those canon pros are really nice but they must be running in hard business mode, sure ... and they are runing in photolabs, so, they are shared effectivelly
the best advice i've ever heard. am planning to buy a printer and watching all this youtube reviews whatis the best printer in the market. i wish you have an affiliate link that i can click on. Thanks for the video.
I learned a lot by watching you channel. I used to develop B&W prints, I invested in all the equipment. loved it but digital took over. I am not sure I can invest in pro printer yet. I am waiting for the best deal to come out. I would like to refill the ink, It makes sense to refill the carts. So an auto cycle every 2 days, sounds like a lot. What can you do if you are away more than a couple of weeks.I would hate to ruin the print head.
I have bought a Canon Pro 300 and have no problems with it at all. It is no complicated to print twice a week simple A4 test document (a few colorful sentences in it). I do not think it is a big deal. And even if I printed 2 A3 photos a week then it is only 8 photos a month. It is not much so for me it is not expensive at all. I am an artist so I like to make my art prints myself and touch it. But I understand that for hobbyists these printers are too expensive and useless.
Thank you so much for all the good info. I was wondering if you could recommend a printer for me. I am a scrapbooker. I make photo albums of family memories and also do other album projects. It can be difficult to find the right type and enough 12” x 12” paper for my projects. Digital paper is becoming the way to go, so I thought I would invest in a printer so I can print the paper needed at home. After watching your videos I have learned a lot. I have been looking at the Epson P800. It may be too much of a machine for my needs?? Can you recommend a printer that will be a good match for me?? Thank you.
None of the photo prints we use can print on 12x12 unless you create a custom paper size. It is nt a standard Photo Size. A CANON Pro-10 or EPSON P600 or the new P700 will suit you perfectly.
I have watched so many photographers talk about printing and none of them mentioned this stuff. Thank you so much Jose. Appreciate you.
That's why I do this. Thank you.
For real bro. I just shot downtown Manhattan last night and stumbled on his videos prior to swiping my card. Love this info.
This is true
I've been in this inkjet business for almost 30 years now. This is the BEST I've heard on printers!!! Jose, you have just successfully UNCLOGGED my brain!! Thanks!
Wow! Thank you sir.
Good message Jose. From your recommendation I have committed to printing from my Cannon Pro10 once every 60 hours or less. This has made me a better printer. I am getting my prints right the first time now (most of the time). It also makes me a better photographer because I now feel I need to go out and photograph at least once a week so I have something new to print. This has been a better investment than a new lens or camera.
There is a system to all of this. The only variables are really your images! The "System" should be reproducing your images as they are.
Absolutely don’t need a second wife... Good job Jose, thanks for that honest video. We need more of these kind of videos on TH-cam.
The Pro1000 is an expensive mistress!!
Great advise! I used a couple of years to decide to buy the Canon Pro 1000 due to the fact I knew it would take commitment both money wise and actual printing. It also took some time to accept the printing costs. But when you do; its the best hobby! Holding a printed picture you are happy with, is next level!
Starting almost twenty years with an Epson 1290, it´s been a long and steep learning curve for me, and from my experience your advice to beginners is spot on. I think your videos are amazing.
Thank you. I an Epson 1280 though.
@@cheo1949 I think they were the same, just different numbers in Europe and USA
This video was an eye-opener for me. I was considering getting one of the pro printers so I can print from home and negate the need for a lab. After seeing this video, I changed my mind. Yes labs are expensive, but so are pro printers!
Thank you Jose
They are a huge commitment but...they give you instant results.
Having said that, I just received my prints from an international lab, and they were (slightly) damaged during transportation. Now that I am more aware of pros and cons of each option (lab and home), I might consider home printing again but only after more thorough research.
I use ink jet plumber on my Mac based on Jose’s advice. No problems at all.
I have had NO success in training the cat to run print jobs.
Thanks for the feed back! The person who wrote the code to this program is also supposed to be working on a windows version. Don't give up on the cat just yet!
I got my cat to run print jobs but they were very paw quality.
@@markrigg6623 bahaahahahahahaaha
Everyone knows cats are stupid, the dog will do it with only a day's training.
I just discovered you. Great video! I followed the path you described, exactly. Had no idea what I was getting into when I bought my Epson 7890 (24”) beast in 2014. Found out quickly about color management , inks, papers and canvases and heavy duty cleaning. Now, I use only the best and most expensive supplies. I was shocked to learn that I could spend $1200 for a full load of ink, that I didn’t need anyway. But luck fell my way and in six weeks earnings had covered the initial outlay of $1850. Now it will cost twice that to replace it. Today, I have over five years on that printer and it is still chugging along nicely, fingers crossed. I thought I was starting a photography business. Now, years later, I consider myself a professional printer and still an amateur photographer. But, printing pays the bills for my hobby. I will be following you on TH-cam. Thanks.
Bought half-pro Epson 8550. I was ready for what you said before I found it, just by "thinking in advance". But not everybody is technical person, so your rare advice can be a real treasure.
My case contains two factors. 1. I had no more time time and patience for "trial and error" with another and another labs. 2. I'm in camera club. There is no problem for me to have some job for my printer three times a week. And if I need longer journey, i have few people in my city, to whom I can give my printer to take care. Care not by nonproductive "clean heads" prints but to make pictures.
Not only I can print like I need, but also provide perfectly consulted prints for others.
I also am in a camera club. That is why I am looking for a printer. I print a lot to get it right. If I had a printer here I could do a small print first to see if the photo is printing correct. I am tired of running to the lab and I don't have time to wait for photos.
This guy is so... So enjoyable to watch and listen to.
He's so natural or something. I can't explain it.
Subscribed!
Thank you. Most say I am long winded and boring!
I've never had a clog in my epson 3800. Let it sit for 3 years once when i took a break from my hobby. Fired it up, ran a cleaning... Worked great.
Thank you for this video. I just bought the 1000. Thankfully, I've been a hobby artist for 4 years and have over 100 paintings laying around that are quality to make prints, my online audience has expanded over the years too and I plan on going to local art stores shows to sell. I'm so happy with this printer and I can't wait to dive in to it!
What’s your IG ?
1. No problem if you have money.
2. This is for people who are serious about art and photography.
Once you take your profession serious you'll realize this printer is no problem at all. If you want a printer for documents etc etc. Go get a toy printer.
I have to agree.
I'm really glad I saw this video, as I was about to buy a photo quality printer. Saved by the bell, so to speak.
Great.
Your knowledge is deeply appreciated, I now understand where I went wrong earlier in this venture. Thank you so much Jose.
Thanks. I switched to the Epson ET-8550 A3+ all in one printer. The ink cost is next to nothing. I can afford to print every day
I just purchased the same printer and I absolutely love it!
Just starting with the same printer (8180 in my country). I US you have Color Precision pigment ink set available, as Jose have mentioned and even hosted this set's author on his channel. In Europe, one company from Austria provides very same prpduct + service. Six pigment inks plus ready-mwde ICC profiles for most of papers made by three most popular brands and for their brand papers. Farbwerke - worth to try unless you fill ypur Epson with mix of OEM hybrid inkset. Worth every panny/grosz/öre/eurocent spent.
Wow! I was considering making a sizable investment into a Cannon professional model printer 🖨 and of course before hand 🖐🏻 I watched many TH-cam videos on the subject of different models and testimonials and LUCKILY came across your video on this very subject. Not only have you Sir saved me a sizable amount of money 💰 but many hours and Aggravation!!! Well, needless too say I decided against buying the Cannon but will instead purchase another Prime lens. I never even considered all the maintenance and after thought in owning such a high end product, thank you. I’m a photographer, that’s what I do! Printing is an afterthought. Being a photographer I’m away to various parts of the world 🌎 often and for extended periods of time, and since I have many expensive photography related items in my home I never would even consider too have a neighbor enter too run a maintenance on a printer 🖨 .... So! Bottom line - No Printer ( lots of💰 time & aggravation saved) add a Prime - Thank You 🙏🏻
Dear Jose, we are watching this from Belgium and having a blast! Thank you for all your wisdom and experience, it’s incredibly helpful.
Thank you! I lived in Belgium from 1980-1983 when I was in the ARMY. Our son was born there. We lived near Mons.
How cool! What was your favorite beer? Do you think it is possible to print a photobook with the canon pro1000, or is it more just for fine art prints? All my best
I though Stella was a Belgian actress 😆 The PRO1000 definitely can.
Me too!
Thank you Jose. Lots of food for thought. I live in the mountains, two hours from Panama City in Panama. There are labs in the city, quality hit or miss, but uggh, at 72 years old, uggh, the drive. We do have the local equivalent of UPS here, it may make it reasonable to use a printer in the city. If I order from the States, the consistently-high-quality prints would come right to my door, but with a two or three week delay and a lot of international shipping costs.
I would like to start selling my prints. But at the moment I have zero customers! Although I am salivating over the Pro 2100, I'm thinking that home printing, with all the pampering, may have to wait until I have a larger client base. I may just have to figure out the logistics of using a "local" lab.
Alternatively, since I want the "fun" of being married to my own printer, I guess I could plan on printing a couple prints per week to build up an inventory even though I don't have a customer. Even if I eventually sold one out of every couple/few that I printed, it might be worth it.
So many variables. So many options. So many compromises. Yup, just like being married. But I wouldn't have it any other way.
Your opinion would be greatly appreciated. Thanks again for this great video. Saludos.
Thank you Jose.
We're in Lockdown down in NZ
I'm just about to buy the Canon Pro 1000, your information gives fruit for thought
I've had this Canon Pro 9500 since about 2003. Used it for printing building drawings just use a drat to save the ink and of course photos. My understanding is it is night and day the quality in the difference of the printers.
Advantage of the pro 1000 I would have is I can print A2 for the drawings plus the quantity for photos. So I need to print a 4x6 print every second day.
In our lockdown Ive been making picture frames from demolition native timber(we're not allowed to cut Native Timber any more, which is great) also been using farm fence battens native and there is a rustic look to them. They really look cool
You've given me fruit for thought that for sure
Cheers
I thought long and hard about the switch to precision colors for my pro 100. Over 90% of my printing ends up bound in books for my own viewing pleasure and sharing with friends. Fading is not a consideration and the cost is an extension of my photography hobby. Any prints I display get changed as new images come along to compete for wall space. Maybe the fascination with 100 year archival quality is over rated for home printing. So far my pro 100 seems remarkably tolerant to neglect, with 2 or 3 week printing holidays and no clogs. Its a wonderful machine.
Stop worrying about that! Of course inks that cost 1/8th of OEM will not last as long before physical fading is noticed. Albums will protect your prints for decades!!! I have about 20 prints I truly care about. They are darkroom silver prints!!! The digital ones can always be reprinted. Most will outlive me! Even without extra protection! And by the way I have several thousand prints! I am going to have to do another video on this subject and hopefully clear the air about this once and for all but I highly doubt it.
I just ordered an epson XP 15000. I hope it works out ok. I can feel an obsession coming. I’ll be frequenting your channel. Subscribed.
Hope you plan on only using OEM inks.
Be aware there are no refillable carts with auto reset chips. Single use chips are available but cost about $10-12 each you add ink and well, it does not make much financial sense compared to OEM.
@@cheo1949 Thank you. Yes, I am going to use OEM inks. I will print every week on a 4x6 size sheet to help conserve ink and prevent clogging. I plan on saving the 8x10 and 13x19 prints for my "best" work that I feel warrants a bigger print. If you feel like another approach at saving ink costs would be more effective I would love to hear your thoughts. Thank you, and happy printing!
Thank you for this. I try to tell people this all of the time. I am a photographer. I do not have a home printer. Even for my test prints, I use MPIX. There is no good reason for me to own a home printer when a lab is so cheap. I have done the math and I cannot print at home for cheaper than using a lab. Way back when the Epson R series was new, I had a home printer. Not anymore. I wish people understood why this is really not a good option for someone that is not printing and selling multiple photos per day.
I have a Canon Pro9000 I bought about 5 years ago, and hadn't turned it on for about a year. I figured it wouldn't work and I'd finally have some extra shelf space when I tossed it. I didn't feel too bad as I didn't use it much and was planning on farming my printing out anyway. To my shock, it printed perfectly!
Backfire?
@@cheo1949 Liked your video, but unsure what this comment means.
Solid Advice. Thank you. Your delivery is so good and honest. Based on your knowledge I will not be trying to print at home and will be having my high-end digital images printed out of house. Any advice on what service to use would be most welcome. I photograph in color and black & white. Have a great day and hello from Rochester NY.
I just knew there were a few caveats about printing from home. Thank you so much for putting this out!!!
I like the relationship analogy 😆
Thanks for making this video, Very important things in here to remember ✌️
Very informative. I have a couple of multi function inkjets. They are generally used for text an copying black and white documents. When I do want to print images, I find I generally have to run the cleaning cycle 4 times to ensure all nozzles are clear and the printer is functioning optimally. Your video makes it clear I have to think carefully about how I would use and maintain a dedicated photo printer like a CANON ProGraf 1000.
Well... that's what i needed to hear but not what i wanted to hear. Thanks. Thumbs up!
Excellent topic! Thanks for the education that has made me plan my entry into printing instead of just leaping into it blind.
That's the idea. Every single day I read about printer owners who had not idea what they were getting into. I've had plenty of successes and plenty of regrets. Just trying to keep others from the same regrets I've had to deal with.
This has been a good informative video for my consideration! I am looking to get into the print business, and looking for it as a business venture than a personal one.
Talking to a few local photographers in my area, there is a definite demand for prints, on various media. I expect a printer to be printing daily
I had no idea you have to print very 2 days at least or your printer will clog ! Your video are very very helpful ! Thank you Jose !!!
The reality of Ink Jet Printing.
Thanks a lot. I was thinking about buying another printer or buy a new print head. I will continue to have 'my' Printer' print my photos. It's a two hour drive to the Printer.
Man...should have seen this video before I got my Pro 1...lol...j/k...I love it...at this point I feel like my photos aren't done until I print.
Maybe you should!d say ANY dedicated photo printer! They can be the thing since sliced bread OR a Money Pit if not used optimally.
Saw an Epson printer at an e-waste place, picked it up for $90. not a good investment, the print head was totally clogged and nothing I did could remedy it, and I wasn't going to pay upwards of $1500 for a new print head (it was the Epson Stylus Pro 9890). I salvaged all the motors and boards out of it and put the whole thing in the dumpster. This was 2 weeks ago. Last week we got a HP Z3200 44" from an ebay seller, local pickup, for $300. Needs a new carriage belt which should get here tomorrow. This should be a much better deal. The inks are cheaper, the heads are easily replaceable and not all colors in one unit either. Wish me luck :)
Wow. Thank you so much for this. I’m just gonna get a scanner for my 35mm film and rely on a lab for my very limited work for now
My printer requires a cleaning cycle every time I turn it on to print a shipping label. I need a new set of inks about every 5 photos I print. Holy expensive printer. Such tiny ink tanks too. 3 complete sets of ink, and I might have a total of 30 prints out of it. Never noticed a clog though.
I just invested in the canon pro 100 and I am so thankful for your message..
Enjoy that PRO100.
Thank you for all the useful information. Appears I am not ready for all the commitments involved!
Smart move.
As a photographer Iv'e been printing for 25 years I use a Pro 200 for pro printing at least once a week maybe make a 6x4 just to keep it happy and it gives me no trouble but expect a yearly ink cost of at least three to five hundred maybe more, if that seems a lot you probaly can't afford it. I have several others and a Canon MG5750 for general office work and print half decent photos on it with third party inks, seriously.! but they will fade unless you put them in a box away from light. Printing does not have to be expensive there are plenty of used printers out there for not much money. Buy matched inks and papers from a trusted supplier and stick with it, don't mix and match or you will get into trouble.
My next purchase will be the Canon Pro-1000 but at five hundred for a set of inks, they are expensive and I wouldn't dream of using third party inks on anything but a cheap A4 jobby I learned my lesson the hard way.
Thank you for taking the time to reaffirm this hard truth once and for all. I was just considering buying a new print head for my petrified Pro-100. Question... for those of us who want to make occasional prints in home and are simply unable to keep an ink jet happy, are you aware of any laser printers that do a respectable job? I am a "B&W only" photographer who would gladly sacrifice a little quality at this point in return for a printer that doesn't mind sitting idle for extended periods of time. I keep hearing about newer "image quality" laser units being better than expected on good paper, but it's tough to find working floor models anywhere to get a sample print made. Just wondering if you might have any insight? Thank you for sharing your knowledge with the world, wishing you the best.
You sir are a hero. Thank you for providing the exact information I needed.
Nice to hear an honest and informed opinion for a change.
Thanks Kevin!
Thanks for the video. Appreciate it . Its an eye opener. I hardly give my time to edit photos, forget about printing. Let shutterfly take care of my prints.
Glad it helped make up your minds. I would not make it as a commission only printer seller.
such a good lot of advice. My only fear is that today's generation won't wait 17 minutes and 46 seconds to get it. All the reasons you describe are why I use a photo lab for printing my photography instead of doing it at home which would be so much more expensive per print. Keep it coming...
Young people do not tend to print. Internet is the way. Its when they grow out of that mentality that they learn that the slow methodical way is the best. Short attention span runs rampant.
Thank you for sharing this truth.
Very wise and very helpful. Thank you.
You're great. Thanks for sharing your obvious experience with printing.
Thanks you for watching Jack! Take care!
I'm glad I clicked, thank you for these notes
Welcome!
I realised this when I was buying a cheap printer, the ink dries out and it also depends on the climate you keep the printer in . Not to hot not too cold . I work for a company who fix printers and it’s the same issue all the time , the users don’t know how to keep their machines running . That’ why businesses are using laser jets instead , it’s powder that that gets charged and melted on to the paper and that’s why you can keep them longer without running . But they are not made for photo printing …
Many thanks for the advice. Made my mind up for me. The lab will still be printing my work.
Often that is the best option
I wish I were watching your videos on a 5 hour earlier, now I'm already acquired pro 1000 I visited the reflection between 300 and 1000 model, self-reflection that the ink cartridge size is bigger and probably more reasonable because the previous home printers have always become stuck and one of the colors has run out when I printed the bigger picture.
I hope I came up with the right choice. The campaign price of 1000 euros attracted the choice.
I was hoping to get a Canon pro printer and was comparing the 10 to the 100 a few months ago. That's how I found your channel. I decided to wait. I definitely want to get into home printing eventually and will actually probably get the Pro-1000. But I'm waiting until I can pair it with a desktop computer (an iMac preferably) that can be on all the time to run scheduled prints every 2 days to avoid purges, and I'll also be wanting to hook it up to a backup power system so in the event of a power surge or outage the printer will never ever ever lose power, yet another trigger for a purge. I'll also probably do Prismacolor refills, but that's another big decision since I would rather use archival-quality inks that last as long as possible. But then there is the domino effect you've spoken of regarding every time you change a cartridge the whole printer does a purge, so… Refilling two sets of carts to switch between may be unavoidable. Your channel truly is so valuable. I've learned so much. Apart from putting me off, it's made me want to wait until I can do it RIGHT.
Just so you know...we now know there is no way to disable or avoid the Auto maintenance cleaning cycles. They will occur as needed whether you print or not. Printing will not prevent them. In fact it is printing that creates the need for them. Residue is produced inside the print head during printing and that needs to be flushed out periodically as needed and detected by the printer.
Do not use compatible carts on your Canon printer. If you must refill..only refill your original cartridges. Watch more of my CANON printer videos for all the info concerning that. I have video playlists for each printer.
Was looking at Pro-10 and Pro-100 but after all this, I saved a lot and got XP-15000....Wife can print photos for house and I can do my oversized prints for airbrush stencils and copies of my other artwork mediums...being able to test my 11x17 true to size prior to making a mistake will be amazing
Pops nailed it! Thanks 😁👍
Jose, I’m glad I found your channel, it has helped me already. I bought a Canon pro 10. I have quite a bit of family prints that I want to make, most of them smaller prints, 8x10, but mostly 4x6 or 5x7. What is your rough estimate of the cost of printing your own prints, compared to a online pro printer like MPIX. Using OEM paper and inks, do you think it’s 10% more expensive or 20% more expensive (or more) to print your own prints? I have printed some with the pro 10 and I am very happy as the skin tones are even better than what I’ve gotten from online pro labs. Thanks!!
There is a very good print cost comparison between printers at the RedRiver Paper Site.
It will be much more expensive initially due to the cost of all the things you will need to really produce top quality prints. Printer, Inks, Monitor Calibrator, Equipment to produce custom paper printing profiles. But one you get set up and you are able to print consistently with great results, it will be much more reasonable. Instant gratification and the ability to instantly be able to reprint something after a slight adjustment trumps any savings you might get from an external lab.
*Words of wisdom.* Thanks Jose.
Thank you!
Thanks for your very helpful and clear advice.
While I do print photos since I had photograpy class, Im an animation student, I got a brother t710w all in one for documents and scanning my drawings it did the job really well never had a problem till like recently, 2yrs after usage my colors are off just refilled my colored ink tanks and it fixed it and the inks are only 20 usd. I print for fun so I never had a need for fancy printers plus I never needed to print beyond a4 sized photos or artworks.
😊
Super-good advice! Most people have no idea what they've gotten into.
Been there and done that! That is why I had to do this video.
Thank you for your insights and breaking down the real costs.
My pleasure!
home printing is okay as long as we use canon G500/G600 printers :D
I love watching him. Too funny!! 🤣🤣
I just came across your video about maintenance. I am considering the new imagePROGRAF PRO-300 - so I will be sure to contact Canon before I purchase it. My main purpose is to make art quality prints of my watercolors paintings and I like the ability to print 13 x 19. I contacted the third party ink supplier I use for my little Canon Pixma, and they said they won't be carrying the ink cartridges for this model. SO - I already knew I'd be getting Canon ink. Thank you for your information -
Watch last weeks Live Stream for a Full Live set up of that printer and some eye opening info. You might want to reconsider the PRO 300
@@cheo1949 I'll try to find that - I see there is one starting in a few minutes:)
As always, you’re the one for printers! Thanks for your video. I do understand why my office printer is so long to be ready when I use it from times to times ;)
Unfortunately they need daily use to keep them happy!
Too late for me. I started out in the dark room, many years ago, making prints and I've had high-end Canon printers for the last 20 years, most recently the pro 1000. Is it without issues? No. Is it cheap? No. Is it a lot of damn work? Yes. But I wouldn't give it up for a million dollars. To me, the print is everything, and to be able to go out and take a photo, be excited about it, and come home and print it, mat it, and frame it, or print up a series of greeting cards for my small gallery, is worth every penny.
Thank you, was almost buying a pro 10 for a fourth of the price, that was the catch. Not so sure I want to do it anymore
thank you. i was thinking of getting one but now i will look for a good lab
Often it is the best option!
I work in a lab, and sometimes customers tell me they're thinking about a home printer. I just pull up the epson ink cost calculator app (by epson, so add about a 3rd to prices to get the real ones), and show them how they'd be paying more in ink alone in some cases, compared to the prices we charge.
One of the most expensive liquids around today.
I hand clean my Epson R2400 with paper towels, swabs and alcool - running the cleaning cycles without this hand cleaning of the jets and other parts will only burn ink like crazy. I use the CIS kits for ink, huge savings. All-in-all it is an expensive process no matter what you do. If you use dyes instead of pigment, it is cheaper but less resistant to UV.
You shouldn't have to be doing so many nozzle cleanings on the R2400. If you just print at least two to three times a week you will avoid having to perform any other kind of a cleaning process. CIS units can also introduce ink delivery problems if not height adjusted perfectly.
That hum that i was talking about with the other video isn't present in this one. The audio otherwise is really good and clean. With the youtube stats, you can turn down the gain on the microphone 3db and it'll sound the same except with a slightly less noticeable noisefloor.
This was really helpful. I'll just send prints off to print shops for a while.
That may have been something I normally do not get. My talking head videos in the last year or so have zero noise or hum.
As I said My original File I uploaded to YT has no noise or hum.
@@cheo1949 sometimes the youtube upload processs meses some stuff up and things like that crop up.
I considered to buy a pro1000 but after watching a few of your videos i decided to dont buy one.
Luckily i could afford one but that would be wasted money, i would use it far to rarely.
Thank you Jose and greetings from Germany !
Good decision. Definitely not one for the causal user.
You saved me a lot of money, Sir!
Thank you so much Jose. Bless up!!
You are welcome.
@@cheo1949 would you kindly happen to know anything about canvas printing, the best type and printer to use...best printer and cheaper but good quality as well... I'll appreciate
Any 13" and larger PIGMENT ink Printer CANON or EPSON will produce the best results. Most CANVAS is Matte so you need a printer that uses MATTE BLACK ink NOT DYE based inks.
Thanks Jose much appreciated
Using my MP990 ONCE a year. Just doing a MANUAL cleaning of the printer head. Perfect! (But that one maybe are not a HIGH end machine). Also old. Although, having problem with the sponges that sucks up the ink to the ink-waste-tank, old ink on them and sticky and get stuck on the printer head, so have dismantled the printer and they lies in water/alcohol right now. Looking on a way to remove the auto-cleaning, he does 3 of them, in 5 min... unnecessary and wasteful to overdo it. Manually = better.
I live in Japan and pay 34 usd per one A3 (giclee), and thats lowest I could find, thats why I consider buying pro 1000
You will be printing A3 for about $3 plus media!
@@cheo1949 thanks for taking time and answering. And by the way, great channel, looking forward for more videos!
Thanks!
one of the best video about printers
Well thank you! Hope it helps.
Good advice. Do you think that the epson ecotanks are any good? Some use 4 colors only another one uses 6 colors. I know that they are inexpensive to use, but with 4 colors will they print quality photos? I don't need more that 8x10 prints.
I used to warn my customers about these same issues for home & wide format inkjet printers. It is a known design flaw with all inkjet printers. You waste money by using your inks to purge and clean their nozzles because they clog so easily if they aren't used often enough.
There are alternatives for wide format and even large format printers from manufacturers of laser printers. Much higher print yields compared to inkjets, faster print times compared to inkjets, lower overall cost of ownership, no cleaning cycles that waste your toners, and they can be left unused for months or years without clogging as there is nothing to clog.
Need to print white, metallic colors, foils, dye sublimation, holographic effects, clear coats, UV security toners, florescent CMYK colors, and more? Laser printers got you covered.
What would you recommend for something in the 12"-ish range? Or heck, what should I even look up to find more info on this?
@@Interactive-Tech Go with a Uninet iColor laser printer. Wide format laser printers yield excellent results. I believe that type of printer handles pages up to 11x17 or 13x19 inches. If you want to be able to switch toners on the fly to a unit that has 5 color toners (CMYKW) plus offers metallic looking toner, dye sublimation toner, clear coat protective toner (also used as a spot color), security toner (for making IDs, passes, tickets, etc), florescent toner then the iColor series handles it all in one machine.
TH-cam has lots of videos covering these types of printers.
Hi Jose. I have been binge watching your videos as I wanted to learn more about ink jet printing. I have one of those all-in-one printers Epson XP530 which I use to print on their photo papers (A4 and 10x15 cm2) from time to time but nothing dedicated yet (been eyeing Canon Pro 100s). In any case, I would like to ask for your advice about a good solution on storing prints (as there is a limited space on my walls :)). I have seen A3 boxes by Canson which comes with 20 sheets of glassine. Is that the way to go? Whatäs your take on this? Sorry if you have covered this in one of your videos, but I can't seem to find any.
That type of storage box would be as ideal as one could get. I don't even go that far and just place an m in my empty paper boxes.
Thank you for the honesty. Saved your website as now I know where to buy ink for my epson 7600
Thanks
Thanks for the honest and great insight. Truly appreciate it.... May i ask you, how do these TONER based printers perform, in terms of clogging and maintenance, especially these high end color printers like Canon iR C3120. I have seen their color reproduction and print quality is pretty professional level.
Are those LASER printer? I'm sorry but I am clueless when it comes to units like that model.
Precision Colors says in his review of the Pro 100 archival quality is "largely a non issue if the correct papers are chosen. Using swellable papers like HP Premium Plus or Ilford Galerie line puts this pretty close to the pigments. If 50 + years is not enough well then move onto pigment inks." Would it be suitable using PC inks and aforementioned papers for photo exhibitions?
Most good printers have a spitoon unit, what this does is allow the printheads to clear there throat before a print and also if they have been idle for to long, most printers also run cleaning cycles without you knowing, they automatically do this before each print as well as pass over the spittoon, they other clever thing that the high end printers have is a drop detect sensor, this checks each nozzle through an LED array & it finds a high ratio of a particular printhead with nozzles down, it will purge that particular head and also complete a cleaning cycle, although i agree with this video in the main. Most modern high end printers today are designed to counteract low volume usage by using the methods above.
Sort of. I like the terms you use. But it is a color channel and not a print head. The print head is the complete unit. Printers do utilize built in safe guards to "Save" the unsuspecting user who knows thing about inkjet technology from the mistakes of not printing often. Purge pad, not spittoon although it is a pretty close description.
Im a technician i fix these printers everyday, purge unit is one thing, spitoon is another, most good printers have both.
Spittoon?? Show me that part in any Service manual!
Jose Rodriguez its very common part, en.m.wikipedia.org/wiki/Inkjet_spittoon
So isn't that the purge pad??? Where the print head gets pre primed before a print job begins. That rectangular unit consists of a ceramic porous "Sponge" sorounded by a peripheral sealing gasket to allow the peristaltic pump to apply vacuum to the nozzle plate so the print head can be successfully cleaned. That then channels the waste ink generated down to either the internal waste ink pads or internal user replaceable waste ink cartridge or tank depending on the printer modle.
Sorry but that Wikipedia source was horribly written and I still can not find the term spittoon on any of my dozens of official professional photo printer service manuals I own.
Maybe that's what you repair guys call it but I don't think it's an official term.
This is very true in 2019. I got a Pro-10 for free from Canon. I haven't bother to set it up yet because of all the reasons you have mentioned. I can't even sell it for $100. A $600 printer sitting in a box LOL. I just have no time.
The rubber rollers will eventually deteriorate. So try to come up with something to do with it.
@@cheo1949 oh wow. It's been with me for almost 2 years. I imagined it would be okay if it was still sealed in the box.
@@cheo1949 if that would the case. I might as well use it. LOL
Yes. Set it up. Check out my Basic Printing PLAYLIST. And my PRO10 Playlists .
Excellent video. My Pro1 still in box as I await a chunk of time to get it set up and learn to use it. I reckon some people could benefit from your relationship advice too :)
Good luck setting it up!
Great honest review ... it clarified my thoughts. Thank you!
Thanks.
Hi, You are saving lot of people money - those canon pros are really nice but they must be running in hard business mode, sure ... and they are runing in photolabs, so, they are shared effectivelly
the best advice i've ever heard. am planning to buy a printer and watching all this youtube reviews whatis the best printer in the market. i wish you have an affiliate link that i can click on. Thanks for the video.
I learned a lot by watching you channel. I used to develop B&W prints, I invested in all the equipment. loved it but digital took over. I am not sure I can invest in pro printer yet. I am waiting for the best deal to come out. I would like to refill the ink, It makes sense to refill the carts. So an auto cycle every 2 days, sounds like a lot. What can you do if you are away more than a couple of weeks.I would hate to ruin the print head.
I use QIMAGE to print a purge image at whatever schedule I choose.
Boy am i glad i came across you sir .
Very informative .👍👍👍👍
Thank you Victor.
Thank you.
You're welcome!
Hi Vet Jose, I have just had my rear kicked, thanks.
I have bought a Canon Pro 300 and have no problems with it at all. It is no complicated to print twice a week simple A4 test document (a few colorful sentences in it). I do not think it is a big deal. And even if I printed 2 A3 photos a week then it is only 8 photos a month. It is not much so for me it is not expensive at all. I am an artist so I like to make my art prints myself and touch it. But I understand that for hobbyists these printers are too expensive and useless.
Thank you so much for all the good info. I was wondering if you could recommend a printer for me. I am a scrapbooker. I make photo albums of family memories and also do other album projects. It can be difficult to find the right type and enough 12” x 12” paper for my projects. Digital paper is becoming the way to go, so I thought I would invest in a printer so I can print the paper needed at home. After watching your videos I have learned a
lot. I have been looking at the Epson P800. It may be too much of a machine for my needs??
Can you recommend a printer that will be a good match for me?? Thank you.
None of the photo prints we use can print on 12x12 unless you create a custom paper size. It is nt a standard Photo Size. A CANON Pro-10 or EPSON P600 or the new P700 will suit you perfectly.
Sir...you saved me 300 Dollars. Thank you so much!
Glad I could help!
What a great video, I am so thankful for all the things you have made me aware of. :). Ty
Printers are like pets they require total commitment
Ive been looking at buying a photography printer, great info thank you
Glad it was helpful!
@@cheo1949 I think I have narrowed it down to the Canon image Prograf Pro 1000, so many to chose from