Your one of my favorite painters . Wish I lived closer to shoot the shit and talk shop . I’m out coating everyday , love it and enjoying this fine trade of ours 👍 keep up the positivity and your approach to how you arrive at the finest finishes 👌
I’ve just bought the contractor pc compact. On my last job I was using 310 tip to spray BM Command urethane acrylic paint. Not a think product. I kept getting these droplets on triggering no matter what pressure 😢 Called a Graco tech department and they told me that the paint required minimum .016 opening…. I am amazed you are running a 308 tip without issues. ❤
Hello Painting by Josh. To date, my sanders have taken forever to sand down to bare timber window trim. I gave up and used a grinder heaps faster results but it is to easy to grind too much ending up with a few dents in the trim. I scrap the corners when the grinder can’t reach. I have one orbital sander and one sander with a rectangular pad maybe 20cm long. At each end pf the rectangular pad, sheets of sandpaper are held in place by a metal clip almost like a clipboard are held in place. I keep breaking the sheets. Thank you. 🙏🏼🙂👍🏼
@seamuswarren hi, sanding the boards back can be a long process. A good quality sander and sandpaper will definitely help. The grinder is a lot quicker, but like you said, you can gouge the timber real easy. Thank you for the message 🙏
I noticed the hinges wern’t taped and that you spray the doors still hanging. Do you replace the hinges or something? And do you spray the door at the same time as the frame?
@ihavequestions6302 I do a lot of repaints, so a lot of the time the hinges are already painted. Yes, I spray at the same time, frames first, then the door 👍
when its time to paint the walls, can you spray paint straight over the semi gloss/ gloss on the walls thats close to the trim? or will you notice the sheen from the semi gloss threw the low sheen paint on the walls?
You just give it a light sand around the edges the go straight over with the low sheen. You cannot notice the difference in sheens even with one coat. Cheers Legend 🙏
So it doesn't matter that you paint the wall a little bit too even though it's no Latex? Just spray the wall afterwards after masking the painted wood and that's it?
What tip would you recommend for spraying Dulux one step prep? Could I get away with using a 210 lpff for spraying both the undercoat and the fast finish top coat? Thanks
Hi kristy. I backroll my last coat of gyprock that is it I don't go over the trim after its sprayed. light sand and dust between coats. Hope this helps! Josh
Hi mate, the both steri & fast finish are very similar I get either what's in stock can't tell the difference between the both. Hope this help. Cheers josh
Josh, iman old school painter transitioning to spraying woodwork. Can you answer for me please. Do I need to be concerned about hitting the wall with enamel? Does it flash through or cause adhesion issues for the wall paint? I've watched alot of people spraying and no one seems to focus the edge of trim. Isn't it patchy or do you go around an cut the sides of door frames after? Cheers in advance
Hey brother what tip for 1 step prep on trim pls? Tried a 310 but had to have pressure on max and it kept blocking despite straining my 1 step prep primer. Help!! Thanks bro
great video mate , im new to spraying ,, may i ask what tape you use to tape up trims the next day , when you go to spray walls? assuming you spray the walls the next day .
@@paintingbyjosh Thanks Josh, it's water based, similar colour that I want to top coat with. I was hoping to avoid sanding and priming. I heard some use liquid deglossifier instead of sanding, any thoughts?
The "atomization" factor is HUGE. I like to spray industrial level water-based Alkyds on residential new builds for how well it sets even when spraying fairly heavy and then 2nd/3rd costs give that old school enamel finish
Took Dulux long enough to tell painters that though, in fact they said nothing til they came up with other products. Bunnings are the biggest buyer of that product so the binders used in it were designed for home use for people brushing and rolling and not trade people spraying.
Hey Mate, I notice you are using semi gloss fast finish, is that your preference or the clients? Do you prefer it over the gloss finish? Also in another video I notice you are using Dulux Envir O2, is that your preference now for doors and trime. Thanks, really enjoy the vids.
Hi mate, cheers for watching 🙌 yes I much prefer a subtle semi-gloss look 99% of my clients prefer that also these days. I do switch between three products the Fastfinish, steriguard & the enviro2 all three are formulated for spray. Hope this helps mate. Respect 💯
Way you use primer line for priming mashine, you can prime mashine true main hose line qithaueany problem. I know guy who's dosint use prime line for 20 years , ok mabe 3 times . and he eavent doesn't have primer line pupe.
Your one of my favorite painters . Wish I lived closer to shoot the shit and talk shop . I’m out coating everyday , love it and enjoying this fine trade of ours 👍 keep up the positivity and your approach to how you arrive at the finest finishes 👌
@carlosvidal105 thank you, Carlos. Appreciate you watching on and the kind word's. Much respect
Keep the content coming brother! Always good stuff.
Means the world mate thank you 🙏
I’ve just bought the contractor pc compact. On my last job I was using 310 tip to spray BM Command urethane acrylic paint. Not a think product. I kept getting these droplets on triggering no matter what pressure 😢
Called a Graco tech department and they told me that the paint required minimum .016 opening….
I am amazed you are running a 308 tip without issues. ❤
Hello Painting by Josh.
To date, my sanders have taken forever to sand down to bare timber window trim.
I gave up and used a grinder heaps faster results but it is to easy to grind too much ending up with a few dents in the trim.
I scrap the corners when the grinder can’t reach.
I have one orbital sander and one sander with a rectangular pad maybe 20cm long.
At each end pf the rectangular pad, sheets of sandpaper are held in place by a metal clip almost like a clipboard are held in place.
I keep breaking the sheets.
Thank you. 🙏🏼🙂👍🏼
@seamuswarren hi, sanding the boards back can be a long process. A good quality sander and sandpaper will definitely help. The grinder is a lot quicker, but like you said, you can gouge the timber real easy. Thank you for the message 🙏
@@seamuswarren what is the reason you are sanding it back to bare? Have you got a linbide blade. Sorry for the late reply. Appreciate the message🙏
Does the enamel flash through when you paint the walls after two coats with a flat ?
Bro, can u do a video showing us ur truck setup? Cheers yo
Yes 👌 I’ve been waiting for that for about a year now 😂
That gun looks awesome... Does it have special filters for it?
Hi Phil, it runs the same filters as the standard contractor 👍
I've noticed there's been a move by the pros away from oil based enamels to water based enamels. Are they as good as the oil based?
I noticed the hinges wern’t taped and that you spray the doors still hanging. Do you replace the hinges or something? And do you spray the door at the same time as the frame?
@ihavequestions6302 I do a lot of repaints, so a lot of the time the hinges are already painted. Yes, I spray at the same time, frames first, then the door 👍
when its time to paint the walls, can you spray paint straight over the semi gloss/ gloss on the walls thats close to the trim? or will you notice the sheen from the semi gloss threw the low sheen paint on the walls?
You just give it a light sand around the edges the go straight over with the low sheen. You cannot notice the difference in sheens even with one coat. Cheers Legend 🙏
@@paintingbyjosh thanks mate, so in what order should i spray? walls, ceiling, trim or is there a better way? keep the content coming...👍
So it doesn't matter that you paint the wall a little bit too even though it's no Latex? Just spray the wall afterwards after masking the painted wood and that's it?
Nice job Josh. What fan and ducting are you using?
Hey bro, I'm using the iquip extraction fan 🤙🙌 product should be in the description!
What tip would you recommend for spraying Dulux one step prep? Could I get away with using a 210 lpff for spraying both the undercoat and the fast finish top coat? Thanks
I usually use a FFLP308 for 1step prep and for top coats. But I know peeps that use a 210 so give it a go mate 🤙
Hi Josh! Do you back roll after spraying new plaster, walls, ceilings or trims?
Hi kristy. I backroll my last coat of gyprock that is it I don't go over the trim after its sprayed. light sand and dust between coats. Hope this helps! Josh
Steriguard has been my go to wb enamel, does that fast finish run easy? Haven't tried that one yet
Hi mate, the both steri & fast finish are very similar I get either what's in stock can't tell the difference between the both. Hope this help. Cheers josh
nice video bud, thx for the upload
Legend mate appreciate it🙏
What respirator do you recommend when spray painting?
Josh, iman old school painter transitioning to spraying woodwork. Can you answer for me please. Do I need to be concerned about hitting the wall with enamel? Does it flash through or cause adhesion issues for the wall paint?
I've watched alot of people spraying and no one seems to focus the edge of trim. Isn't it patchy or do you go around an cut the sides of door frames after? Cheers in advance
Let’s see a truck tour Josh. Don’t hold out on us bro. Set it up! 😎
Yeah alright i have had so many messages about the truck will get one sorted bro🤙🙌
Hey brother what tip for 1 step prep on trim pls? Tried a 310 but had to have pressure on max and it kept blocking despite straining my 1 step prep primer. Help!! Thanks bro
great video mate , im new to spraying ,, may i ask what tape you use to tape up trims the next day , when you go to spray walls? assuming you spray the walls the next day .
Cheers legend, I use the iquip envo tape for most applications. But I do not bother taping up the trim I cut and roll my final coat! 👍
Easy when wall and trim r same color
Good job man
Thanks
Just saves extra coat cutting and rolling 💯🙌 cheers for watching
I just put on a cross eyed painter he can estimate the walls & the ceilings at the same time...Seriously great vid's..... Stay cool....👍🇦🇨
Haha that only helps if he can paint both at the same time or he's loosing you money 💯😂 respect Phil
Hey mate do you water down the fast finish. Just started using it due to your recommendation and love it
Hi Phillip, I never water down any of my waterbased product! Stoked you are using and digging the product mate 👍 🙌
Thx for the vid Josh. If I have existing semi gloss trim that is in good nick, do you recommend scuffing or sanding before fast finish?
Hi mate, depending if it existing water based semi- gloss or oilbase? But I always give a good sand and usually prime before top coats 👍
@@paintingbyjosh Thanks Josh, it's water based, similar colour that I want to top coat with. I was hoping to avoid sanding and priming. I heard some use liquid deglossifier instead of sanding, any thoughts?
Top video Joshie 🤙🏼
Respect legend 🙌
Hi Josh, what product do you use for filling nail holes on new frames?
Paint professor Josh🙂
The "atomization" factor is HUGE. I like to spray industrial level water-based Alkyds on residential new builds for how well it sets even when spraying fairly heavy and then 2nd/3rd costs give that old school enamel finish
Great work mate awesome way to get it done 👍🙌
Good call out👍 not many know this that is why they have runs with Dulux aqua 😉🤙
Respect legend🙏🤙
Took Dulux long enough to tell painters that though, in fact they said nothing til they came up with other products.
Bunnings are the biggest buyer of that product so the binders used in it were designed for home use for people brushing and rolling and not trade people spraying.
Hey Mate, I notice you are using semi gloss fast finish, is that your preference or the clients? Do you prefer it over the gloss finish? Also in another video I notice you are using Dulux Envir O2, is that your preference now for doors and trime. Thanks, really enjoy the vids.
Hi mate, cheers for watching 🙌 yes I much prefer a subtle semi-gloss look 99% of my clients prefer that also these days. I do switch between three products the Fastfinish, steriguard & the enviro2 all three are formulated for spray. Hope this helps mate. Respect 💯
Nice work brother. Going to give the Fast Finish a go.
Legend bro Its good stuff 🙌
Don’t you tape the walls so you don’t get a semi gloss/ gloss, stripe on the wall close to the trim?
No because I cut and roll another coat of low- sheen 👍
Do you still do two coats when spraying?
Hi Shevin, yes most definitely I always do two coats minimal. Cheers
what size tip are you using to spray with?
I'm using the FFLP308. Cheers
Beast 🔥
Much love🙌❤
Great stuff Josh… sorbs
Hi
Do you sand the semi gloss over spray before u cut in walls?
Yes, it's definitely recommended to ensure proper adhesion and to also sand down any rough areas
thanks josh nice video
Cheers legend
The slo-mo isn’t the best for helping people understand the speed to move across the finish. But it was good to see how you approached the window.
Yeah maybe not, you gotta move quickly that's for sure 👍
Way you use primer line for priming mashine, you can prime mashine true main hose line qithaueany problem. I know guy who's dosint use prime line for 20 years , ok mabe 3 times . and he eavent doesn't have primer line pupe.
Nice vid😊
Where did you get them overalls
There called bisley bib & brace mate. Then I cut them onto shorts 🤙
Thanks a lot
👊🤙
💯respect
👌🏻🤙🏼
Respect brother
I thought that wolf was gunna eat you mate.
Gotta watch the wolf's bro 💯😂