Want a roof top tinny loader? WATCH THIS FIRST | Custom Boat Loader FULL review - NOT SPONSORED!

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ส.ค. 2024
  • A non biased review on the Custom Boat Loader - rear loading roof top tinny loader. See how these work in real time and weigh up the pros and cons of different brands for yourself before investing in one.

ความคิดเห็น • 29

  • @ourrealitytravels
    @ourrealitytravels  6 หลายเดือนก่อน

    We've tested this loader in the real world and it keeps coming back for more. Any questions on it, let us know in the comments below.

  • @goforeitgolf
    @goforeitgolf 6 หลายเดือนก่อน +1

    Such a good setup! Now all i need is the tinnie 😅

  • @emilytregear1038
    @emilytregear1038 5 หลายเดือนก่อน +1

    Amazing set up! Would love to know what the custom boat loader set you back!! Cheers

    • @ourrealitytravels
      @ourrealitytravels  5 หลายเดือนก่อน

      Thanks! Super easy to use and built to last which is what I look for. Cost will vary depending on the setup - best to give Cam a call and they can give you some guidance. Cheers, ORT

  • @sineadosullivan7072
    @sineadosullivan7072 5 หลายเดือนก่อน +1

    Great setup, thanks for the info 😊

  • @SageBison1
    @SageBison1 6 หลายเดือนก่อน +1

    Decent benefits over the side loader

    • @ourrealitytravels
      @ourrealitytravels  6 หลายเดือนก่อน

      Yeh for sure, worth checking out. Cheers, ORT

  • @OTR-19
    @OTR-19 4 หลายเดือนก่อน

    Thanks for the video and showing the loader in such detail.
    Would it be possible to let me know the total length of the loader and if the rear overhang is based on the vehicle to clear it when the boat gets lowered and lifted up?

    • @ourrealitytravels
      @ourrealitytravels  4 หลายเดือนก่อน

      Hi mate, best to give Cam at custom boat loaders a call and he will be able to give you some guidance, I'm not sure of the specific measurements off hand and not with the car at the moment. Don't want to give you bad advice. Cheers.

  • @beejmurphy4310
    @beejmurphy4310 หลายเดือนก่อน +1

    Hiya, do you know what sizes do the winches come in please?

    • @ourrealitytravels
      @ourrealitytravels  หลายเดือนก่อน

      I'm not sure sorry, best to give Cam at Custom Boat Loaders a call and he will be able to give you some guidance. Cheers, ORT

  • @fishinbite
    @fishinbite 5 หลายเดือนก่อน +1

    What an easy setup! Is that a different tinnie to before as i can see makocraft on there. Thought your last one was the dart?

    • @ourrealitytravels
      @ourrealitytravels  5 หลายเดือนก่อน +1

      Hey mate, the custom boat loader is gold. Yep this one is a mako - I sold the Dart a little while ago and have just built a new setup. Both are great little boats, the Dart HDW is just slightly better than the Mako 370HD IMO due to layout. Without collar the mako is marginally more stable at rest though. Cheers, ORT.

    • @fishinbite
      @fishinbite 5 หลายเดือนก่อน

      @@ourrealitytravels if you were to buy a new one, would you go a dart or a mako 370? I want something with decent ride but still some stability even without a collar.

    • @ourrealitytravels
      @ourrealitytravels  5 หลายเดือนก่อน +1

      For me, I'd be putting a collar on it without question so would go the Dart. If def no collar, the Mako would be worth considering for the extra stability from the edge tracker design. Both are great little tinnys. Fully welded and higher sides than most.@@fishinbite

    • @fishinbite
      @fishinbite 5 หลายเดือนก่อน

      @@ourrealitytravels cheers mate!

  • @jeffcai3427
    @jeffcai3427 3 หลายเดือนก่อน

    The nicest set up so far. What GVM upgrade that you have on the cruiser? Thinking about going 3999 but not sure if it can handle a boat on top.

    • @ourrealitytravels
      @ourrealitytravels  3 หลายเดือนก่อน +1

      3800 in this one. Very tight on capacities with a decent size van (we don't tow a 3.5t van). 4t should be fine depending what other gear you want in the car (if you start going rear bar, long rang tanks, drawers etc you will be pushing it). Make sure you check rear axel weights as well as this can catch people out. Cheers, ORT.

  • @courtneymccagh3815
    @courtneymccagh3815 4 หลายเดือนก่อน

    Gday mate.
    Much noise created from boat / rack etc when on highway or corrugations?
    Also….
    Is it easy to completely remove the boat loader from the roof if I wanted to re install a different roof rack for a trip not requiring the boat?
    Cheers in advance and thanks for the vid mate!
    Courts

    • @ourrealitytravels
      @ourrealitytravels  4 หลายเดือนก่อน

      Hey Courts, I think the noise level will depend on vehicle. The 200 has pretty good noise suppression and I can't say I've ever notice anything from it. If you don't put a twist in your tie down straps they will humm, but otherwise no noise for me.
      To take it off is relatively easy, two bolts on each mount - but its heavy and you will either need two people or a hoist system of some sort if you want to do it single handed. I tend to just leave it on and use it as a roofrack when I need the extra space as it doesn't annoy me being on there. Cheers, ORT.

  • @Ramjet7777
    @Ramjet7777 5 หลายเดือนก่อน

    The website doesn't show a y62 patrol so i'm thinking this isn't suitable with the rear door coming aways up!?

    • @ourrealitytravels
      @ourrealitytravels  5 หลายเดือนก่อน

      I don't think a y62 has roof rating high enough to put any decent size boat on it unfortunately mate. Best to give them a call and ask - what Cam doesn't know about roof toppers aint worth knowing. Cheers, ORT

  • @Palava3408
    @Palava3408 2 หลายเดือนก่อน

    Hey bro thanks for the great info, does the tinny have much effect when driving on the highway, iam tossing up putting one on

    • @ourrealitytravels
      @ourrealitytravels  2 หลายเดือนก่อน

      Surprisingly with the heavier suspension in the car it still drives really well. Of course you can feel it on there, but compared to other vehicles I've had in the past (prados/hilux etc) the roof load doest impact the cruiser badly. I've never had it on there without the gvm upgrade though - standard springs might be a different story. Cheers, ORT.

  • @notAproduction
    @notAproduction 3 หลายเดือนก่อน

    How long is your boat?

    • @ourrealitytravels
      @ourrealitytravels  2 หลายเดือนก่อน

      3.7mtr (12ft in the old scale). Cheers, ORT.

  • @tylerranes9391
    @tylerranes9391 4 หลายเดือนก่อน

    Do you know if I could get this in the states?

    • @ourrealitytravels
      @ourrealitytravels  4 หลายเดือนก่อน

      I'm sure if you were willing to pay the freight they would send one over for you. Can't imagine it would be a cheap exercise. Cheers, ORT