How I did my BRAUM seat on the passenger side the air bag seat sensor I connected it to the bottom of the seats I used a resistor on each side of the seats using a 4.7 ohms resistor Oh yes disconnect battery no warning or airbag lights on dash It’s important for the guy of the Q60 to make sure he uses 4.7 ohm resistor I also use the original wiring harness of my 370Z to make it plug and play I threw the seats away 😬as it doesn’t have wiring harness Your seats are 🔥🔥🔥🔥bro
How I did my BRAUM seat on the passenger side the air bag seat sensor I connected it to the bottom of the seats I used a resistor on each side of the seats using a 4.7 ohms resistor Oh yes disconnect battery no warning or airbag lights on dash It’s important for the guy of the Q60 to make sure he uses 4.7 ohm resistor I also use the original wiring harness of my 370Z to make it plug and play I threw the seats away 😬as it doesn’t have wiring harness
Definitely want to see how you install and config the line locks man! Cool seats though-2 questions: -if you get any water in the back from rain etc. arent you worried about that resistor wiring grounding out? What becomes of your stock Z seats? Do you keep them / sell them?
Thanks, so I’m not worried I keep the car closed up. If it ever becomes an issue I can buy a couple small enclosure/junction boxes. The OEM seats get put away now for when I ever want to return to stock.
Dude I tried the resistor method on my Q60 when I got my Braum seats, didn't work, but I also didn't do the whole 9 yards like you did with making an emulator with the terminals. Need to try this.
Carbon seats on point 👌 Guys I'll release the line lock video after the next two videos. I want to upload TRC Night Meet and FL2K videos.
Chasing weight reduction is always fun, thanks for the airbag sensor guide!
Absolute life saver. Thanks! Also, I have Sparco aluminum brackets. They are very light.
Anything for the fast guy 💙
How I did my BRAUM seat on the passenger side the air bag seat sensor I connected it to the bottom of the seats
I used a resistor on each side of the seats using a 4.7 ohms resistor
Oh yes disconnect battery no warning or airbag lights on dash
It’s important for the guy of the Q60 to make sure he uses 4.7 ohm resistor
I also use the original wiring harness of my 370Z to make it plug and play
I threw the seats away 😬as it doesn’t have wiring harness
Your seats are 🔥🔥🔥🔥bro
Dangg !!Those are fire ! I want these too 🔥🔥
How I did my BRAUM seat on the passenger side the air bag seat sensor I connected it to the bottom of the seats
I used a resistor on each side of the seats using a 4.7 ohms resistor
Oh yes disconnect battery no warning or airbag lights on dash
It’s important for the guy of the Q60 to make sure he uses 4.7 ohm resistor
I also use the original wiring harness of my 370Z to make it plug and play
I threw the seats away 😬as it doesn’t have wiring harness
Definitely want to see how you install and config the line locks man!
Cool seats though-2 questions:
-if you get any water in the back from rain etc. arent you worried about that resistor wiring grounding out?
What becomes of your stock Z seats? Do you keep them / sell them?
Thanks, so I’m not worried I keep the car closed up. If it ever becomes an issue I can buy a couple small enclosure/junction boxes.
The OEM seats get put away now for when I ever want to return to stock.
Dude I tried the resistor method on my Q60 when I got my Braum seats, didn't work, but I also didn't do the whole 9 yards like you did with making an emulator with the terminals. Need to try this.
Give it a shot again. I think it’s the same resistors for the Q’s as these if I remember correctly. Just rewatch my Q50 seat video to confirm.
Where do you buy these seats?
Kevmannz.com
Do you think the airbag 360 will work for a Q ??
There is a possibility that it will, but I’m not sure.
@@ZillaFullBoost also where can I find the pins you used on the wires?
You may find them in here. amzn.to/4dLJUTq
The smallest flat ones in there should be it
@@ZillaFullBoost thank you 🤝🏼 can’t wait for the new videos you are cooking up.
Hello, do you need thumbnail designer for you video?
Not at the moment thanks though
how much weight have u shed so far from oem?
Not much with this set up. Maybe a total of 30lbs. I’ll be changing up the bracketry to save another 20 or so.
@@ZillaFullBoost really ? i thought wheels/exhaust/seats would shed every bit and there and also the strut bar in the engine also.
@@Thrilla604 oh I was just talking about seats. I’m probably around 200lbs lighter.
@@ZillaFullBoost nice! another 150lb would b nice XD
@@Thrilla604 yea bare in mind I also added weight because of the interchiller, pump, lines and reservoir tank.