Installing New Chain & Sprockets | GSXR1000R Build
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- The Suzuki GSXR build is now in full swing but there is one area which is letting the side down.. Massive thanks to Sports Bike Shop for providing the GSXR sprocket kit:
www.sportsbike...
Also the chain breaking tool is available here from Venhill, worth spending a bit more on decent tooling! www.venhill.co...
Massive thanks to my channel supporters : www.wheelsmoto...
-----------------------------------------------------------------------------------------------------
NEW PATREON ACCOUNT NOW OPEN - Early video access, behind the scene videos and blogs -
/ lambchoprides
----------------------------------------------------------------------------------------------------
LCR Stickers are back!
digitalsignfx.c...
Team LCR clothing now also available:
teespring.com/...
----------------------------------------------------------------------------------------------------
Phone mount from Ultimate Addons:
ultimateaddons...
Filming Equipment used:
Camera Primary - GoPro Hero 4 Silver - amzn.to/2rlaBec
Secondary's - GoPro Hero 4 & 7 Black - amzn.to/2rhoU1m
Intercoms - Sena 30k - amzn.to/2r8EUUO \ Cardo PackTALK BOLD - amzn.to/2RSrbjr
Drone - DJi Mavic - amzn.to/2rlwhqv
Data Logger - SpeedAngle www.rg-racing.com
Helmet microphones - Sony ECM-PC60 - amzn.to/2qx7K2t
----------------------------------------------------------------------------------------------------
Bike upgrades - Supermoto:
Wheels by SMPro Wheels - www.smprowheel...
Brakes by Moto Master - www.moto-maste...
Tyres by Avon - www.avon-tyres....
Bling - www.ebay.co.uk...
Bike upgrades - GSXR:
Ti Exhaust - brocksperforma...
Chain / Sprockets Kit - www.sportsbike...
Levers - UK Race Support - www.ukracesupp...
Rearset - Gilles www.performanc...
Cruise Control - www.mccruise.com/
Exhaust Hanger - www.rg-racing....
Suspension - nitron.co.uk/
Hugger - www.pyramid-pl...
Engine Protection - www.gbracing.eu/
Titanium Race Bolts - www.racefasten...
Titanium bobins / axle nuts - racetorx.co.uk/
===================================================
More from Lambchop Rides on:
lambchops1971
www.Facebook.com/LambchopRides
Instagram - lamb_chop_rides
Thank you
LC
Revisited this video to check I'm doing things right?
Bought a Venhill set because of this, excellent bit of kit worth every penny although when flaring be careful to not over do it otherwise you crack the chain pin and have to get a spare link piece!
Will I ever learn, doh!!
Definitely need a light of some sort! Can't see anything!
Yes sorry, first part of video had my camera set to wrong settings! Apologies
SMASHINGLY... That's a word I haven't heard in a long time.
*Que the Wild Thornberries Themesong
King of bling it's a proper Bobby Dazzler !!!! Looks great Mr Chops 👍
Brightened up my evening with all that gold Chops!
I am glad that Wheels Motorcycles are being good to you. I get my Aprilia Tuono serviced there and live close by - And always try to support them
Very pleased with the colab with them, so much good feedback from customers too! Will have to get up there one day for a subscriber meetup..
@@LambChopRides that would be great.
Looks much better. That chain tool is spot on.
Wow 😮 that was a filthy old sprocket LC. Job well done bro 👏
Bloody excellent!
Great video again. Love the GSXR 😚
I've bought every mod you have. Literally picked up 6k in parts. I love your channel!!!!
Thanks Brandon lovely bike with the mods isn't it! 👍👍
@@LambChopRides oh absolutely, I've never actually had a full exhaust always a SO. But that predator note is so crisp, and with our auto blip omg.
I had never heard of Brocks, until your channel. So thx for turning me onto that.
I literally laid in bed, watched your channel, next day went out and dropped 14k on the 1000R, then watched the mods, and said well why not.
👍👍🇨🇦. Great vid, great timing. Just bought an Honda AT and haven’t had a chain driven bike in a while. It was nice to get a refresher. Cheers!
You've gotta appreciate that rear hugger. Gorgeous bike mate.
Love the bling! You should check out Supersprox, they make some of the best lightweight sprockets on the market (they're called Stealth, steel teeth and aluminum core) and they also sell RK chains (including the GB520XSO, GB525XSO and GB530XSOZ1 arguably the best chains on the market right now).
I have a Stealth rear sprocket on my S4RS, great quality.
+1 for Supersprox,Stealth Rear,DID X Ring chain,Ognebene Front that's enough Bling for me lol.
Well done that man...
What! No titanium sprocket nuts and sprocket hub bolts 😳
With around 180bhp at the wheel, I wouldn't go fast touring on it, you will be adjusting the chain a lot! with the renthal rear sprocket, even though it is Hard anodized
Sounds proper dirty on the dyno, nice one
Thanks for another great video, one of 2 channels I watch on the day of release. Thanks.
Thanks 👍
Just about to do my Ducati ST2 - so very useful - Thanks mate.
Liking the jizzy intro and jingles 🖒
funnily enough i've just done mine, mind you with the help of my brother. Went one tooth less on the front and now the bike feels amazing.
I actually really like it without lower fairings (bar it’s a bit messy) Also carbon or black front and rear fenders are a must to make it look more classy less chintzy;)
That is handsome Chopsey !!!!
Brilliant video chops 👌 I like . 5 🌟 thanks Danny
Thanks Danny 😁
Nice chain combo👍 Looking good👌. You have created a nice Suzie🏍🤘
Thanks Ken 👍
Looks tight a*f****!!! Looking forward for next episode 💪
Yes it's a bit tight but needs to be as QS works better when its tighter. But it's a fraction too tight your right
Great vid again Chops, love your garage series, was a bit surprised you didnt go for a tooth less on the front sprocket, usually does wonders on a bike, the gearing feels more natural I would say (they use a bigger front one for the sound homologations i've been told), made a huge difference on my tuono...
I normally do but Suzuki have the gearing spot-on on this. Any shorter and would be too rev happy on the motorway 👍
I would check to see if dry lube is okay with this, I'm pretty sure it's not advised on street bikes. On XS ring chains you must use chain oil, no dry lube or chain wax.
Good tip will check that out 👍
@@LambChopRides I have AFAM chain and sprockets to fit to my bike, they say only use oil based lubes so I got some Rock Oil chain lube.
It's supposed to reduce fling so less mess, needs leaving at least 20 mins before riding so solvents can evaporate.
Your Beard is magnificently groomed chops!!
Like an older Rylan!!!
Haha oh Jesus, my name used in the same sentence as Rylan that's incredibly worrying! Please don't start calling me Rylan's dad! 😂😂
I was thinking more like an older Noel Edmonds😄 Sorry Chops only kidding!
I'm the proud owner of a very well kept goatee that I've cared for since 1993. Just can't part with it
Best to still grind the pin heads off anyway. Less stress on the tool. I. Bet you put a bar wrapped in a towel through the rear wheel to crack the front sprocket nut.
Yes I did, was super tight two man job really..
I don’t push the pins out, I just use a cutting disc & cut the chain in half.
Best invest in an impact driver mate, I had a nightmare last time I done it, for this time my impact driver should make it much easier, get impact sockets too :)
Also I would always grind the pin with a Dremel, even if using an expensive chain breaker, all can break without doing so, but why make it harder on yourself and the tool.
Yes both great tips, need an electric impact driver great idea! Also top tip on the chain splitting as still hard even with the tool. I will grind it next time I do one anyway
@@LambChopRides 😀👍
I love the gold chain and gold sprocket, even on my old thing it just looks so hood (i believe thats what the kids say).
Glad to hear you've stepped away from the grinder, that thing wasn't save in your hands. 😂
Good vid Chops, looking forward to the dyno part. 👍👍👍
Yes I thought anymore flip flops and angle grinders & going to have the health and safety bods around! 😂
@@LambChopRides 😂 no kidding.
Only just discovered your channel dude from the V-strom 650 review, Subscribed :)
Welcome Terry
So glad to see a video on a diy "simple" job where as usual nothing is ever simple! How many times is there an instruction to just undo a nut and an hour later you're still struggling and the cavalry is called in! 😖
Perhaps invest in a bit of camera lighting for the channel? 👍
Thanks Michael, yes problem was camera was on the wrong setting for the start of the video. Very dark isn't it. Won't happen again sir 👍
This bike needs to go on the Autobahn 🚀
Hey love your video keep the good work up ,I have a 2011 Gsxr-1000 and am thinking to change sprocket and chain 16 fron and stock rear need your advice?
😎👍
Get some lightech chain adjuster blocks. Proper quality, proper sexy. Quite cheap for what they are.
I did some chain cleaning and noticed my front sprocket has two teeth broken off. I'm guessing the quick shifter. Anyone else have your current get gsxr 1000r with broken teeth? Amazing bike. Crappy heat treatment on the sprocket
Get your chain adjuster bolts sorted... and while ur there clean ur bottom linkage.... that's my OCD creeping in....(auto detailer by trade...😎
Haha yes I know, lower linkage is proper corroded but can be brought back with some effort..
Chain adjuster setup thinking of an aftermarket option currently
@@LambChopRides Gillies chain adjuster and paddock stand lifters....a friend has got some on his modified CB1300....😎
MOAR GOLD!!!
Wow shes a beauty
Nice work!
Think that front sprocket was tight? I had to use an 21 inch breaker bar on my speed triple oil filter after the dealers over tightened it. Got proper scared it was going to shear off Lol.
It was difficult for me to tell, but it looked like your chain adjusters were adjusted quite a ways out. Should the chain been a link or so shorter to allow for more adjustment in the future? I'm not a fan of chain drive and ride mostly shaft and belt driven bikes. Perhaps when the chain begins to stretch, it is worn out.
Can you come and put a gold sprocket on my Street Triple pretty please Chopsie??
Haha yes sure, will bring my angle grinder 😆
fort nine has testet chain lube vs other stuf;)
Good vid & more interesting than I thought it would be lol. Although it did look a bit of a ball ache but the chain & sprockets looked really good fitted in the end. Although I'm concerned you may be turning in to a bit of a bling tart. ; )
Haha guilty!! 😆
First class upgrades.
Take a look to the new Broc´s movie.
Cheers.
Will check it out 👍
Torque wrench is not a breaker bar.
Where are those carbon wheels chops.. chain guard too...
Wheels are coming soon 😎😎
No locktight on the sprocket nuts ?
Did you not flare the split link? I’ve got a d.i.d x ring chain and once I’d put the plate on you then flare the pins to make sure it doesn’t come off.
Yes it's been flared, that final shot is with the flaring. I have since the video done it a little bit more however 👍
Lamb Chop Rides I was shitting myself that I was going to crack mine when I did it, lol.
Don't want to say anything but you should have used Whale tool and not alpha tool on sigma chain. Just saying.
Why didn't you want to clean the factory grease off the chain before fitting it? That make it a messy job to install. Guess you we're too excited to get the chain on and see how it looked.
It's a very messy job anyway, just wear gloves, although I did not last time, I will when I do it soon :)
Think it's easier when you can rotate the wheel when fitted to clean it.. rubber gloves kept me clean 😁
Why the remap when it's already been to Hilltop which is supposed to sort every change you may make.?
It's not brilliant Rob, gone back to old school methods
Hi can you remind me where you bought your titanium rear sprocket nuts?
Hello chops,
I have that teng tools torque wrench. Handle is a bit small though lol. Good on you mate. The water pump, the sprocket, some piping and the chain look grim so all this your doing is great and Suzuki should have given better quality parts but other than that fuckin great video. Give spicy the sprocket mate and make a clock out of it haha!
It's a good bit of kit, I know your not supposed to use them to undo stuff but was the longest wrench I have lol 😆
Another great vid, didn't the Hilltop Map adjust automatically though?
You will wreck the ratchets undoing tight bolts/nuts, need to get some breaker bars.
Yes I know but had no choice it's my longest breaker bar.. people are always moaning a don't use a torque wrench and when I do this happens 😂
flare the pins????
I have a question for u the front sprocket is the word face in or out
Nice work chops! Looks pretty mint, nice work, you do need to do something about those chain adjusters though, maybe some nice lightech blue or gold adjusters? One question about your new video, have you not gone back to hilltop ? I'm about to get a hilltop tune and would like to know if you found an alternative?
www.lightechuk.com/ekmps/shops/heneghan3/images/lightech-suzuki-gsxr1000-r-2017-chain-adjuster-kit-21684-1-p.jpg
I found the Hill Top tune wasn't working well with the full system. It's much improved now with a live map specially for the bike.
Yes want something like this for sure
@@LambChopRides thanks for the info, appreciate it. Keep up the vids, love em !
Looks good but that soft metal renthal sprocket wont last long ..had one last year chewed itself up 🙁
I used to have one on my fireblade and did a couple of seasons.. Will keep track of the mileage and report back 👍
How longs that aluminium rear sprocket gonna last? 6000 miles?
Hi chops can you let me know what camera/phone/GoPro and (mics) etc equipment do you use to make this video and your on bike videos
Chops, to undo or tighten the front sprocket pop the bike in gear. 👍🏼
Yes was in gear, that's why it was driving forward as I tried to undo it. It was abnormally tight the bugger 😂
Lamb Chop Rides bloody hell! Who did that up?!
Tack2252 Suzuki of course!
Man I want that lift.
It's incredibly handy, would be lost without it now!
Lamb Chop Rides is it the ABBA skylift?
Yes correct, had it for 3 years or so.. No problems or issues
Lamb Chop Rides ideal, I’ve got the standard lift and front wheel one so it may be a future purchase for me.
Nice chain 👌 regarding your full Brock's exhaust system why didn't you send him your ecu to be flashed ?
Better to do a custom map, plus sending ecu to USA bit risky it could go missing!
Hi there chops, I am fitting exactly the same chain and sprocket set up as yourself, could I ask you did you pean over the rivits on the link?, I got my chain and sprockets from B&C express and they came with a solid rivit link, unfortunately I now have had to puchase a Whale tool to pean over the solid rivit link DOH!, I am not to sure in your blog which rivit link you used, a hollow or solid link?, I was told by B&C express that the Sigma chain only uses the solid link to connect the chain and not a hollow link, any advice gratfully accepted.
Yes I did, the final shot is me peaning it. Sorry should have pointed that out in the video
No worries chops, 206bhp whens this all going to end?, top reflashing.@@LambChopRides
I don’t like the way that rear sprocket was loose on the bolts.
Nice. I always wanted a proper chain breaker.... might have to invest :)
p.s. Was all this filmed on the G7X?
Worth it Weem, not heard from you in ages matey everything ok your end? Yes all filmed on the G7
Why did you not just take a bronze or steel brush, fasten the nuts in a vice, a little brake cleaner spray, 20 seconds of brushing and the sprocket nuts would have looked almost new....
Reason is Tom have new ones coming on the Dymags wheels. But yes that would have done it!
Time to spend some of that youtube money and get yourself an impact driver.
Will Chops every be happy or is this like pandora's box, your happy after a new sprocket then need to upgrade something else..lol!
👍
I like your cap,where did you get it from?.
It was actually from an Instagram advert, don't normally buy stuff from those ads but liked the look of it.. Never seen it anywhere else..
Sorry do you press the ends of the link pins over?
Yes it has been done in the last shot, but your right should have mentioned that's what I was doing in the last clip
@@LambChopRidesThanks - I missed it!
What lifting stand do you have ?
Its the Abba Sky Lift
The best thing that happened to this bike is LCR.
Haha thanks 😁
all is now needed is the motorliner chain block adjuster works a treat to keep spindle lined up as standard Suzuki block is shit ! www.motoliner.com/suzuki-rear-wheel-alignment-block.php oh sorry update on renthal rear sprocket NO thanks ware to fast use supersprocks rear or standard steel better
manky old chain and sprockets off, all nice new shiny... good for many more miles.... then you re-use the manky old sprocket nuts that look awful lol.. .come on! ;)
Don't worry they have been replaced now 😁
Wheres the carbon wheels
All in good time Karl 😁
This video jut came up recommended videos and I'm thinking Is this Al fagans dad from 44 teeth? Lol
Haha your not the first person to say that Aaron 😁
@@LambChopRides Lol! the Gsxr looks super quick by the way! I'm looking into having mine re mapped but i want to find a good reputable tuner that is local to me first
Chops you was gonna clean the sprocket bolts ??
Check out Cameron neimela for all your bike clean tips
He’s a god
Chops... ghetto.. f off 😎😎
I can tell your a journo. All the moans and the groans and fear of some grease. Keep it up thou
Hi Chops. I enjoy most of your videos. You're a funny bugger with an indearing personality but the bike build series is in my opinion the weakest area of the channel. It's just bolting on after market parts. Nothing very imaginitive there. The CBR transmogrification into "Beasty" was in a different league. Creativity wins!
FYI WD40 and a few chux wipes can clean up a sprocket pretty easily.
That sprocket is also badly corroded, plus it's not gold 😂
@@LambChopRides Haha yeah I posted when I first started watching the clip. Also, I sat on the CB1000R today. First time I've seen it in person. It definitely looks quality compared to its competitors.
where did you get that bike lift?