Jacob what's up I'm a linesman down in FORT LAUDERDALE FLORIDA I work for VIKING UTILITY I have a cart just like yours I'm looking to lift it what's the name brand of the one you have ?
Chad Pope Club Car DS 1982-2003 Electric &1997-2003 Gas 6" Double A-Arm Golf Cart Lift Kit www.amazon.com/dp/B079Q874RV/ref=cm_sw_r_cp_api_i_vP7LEb0EB4ZCE
Older Club Cars are either a DS or a Precedent. If you mean you tag starts with an AG then that is a DS which is the same in the video. www.performancepluscarts.com/club-car-year-guide/
Ken it was a 2” aluminum wheel spacer kit - 1” per side (4) 2" (1" per side) Wheel Spacers EZ GO EZGO Club Car Golf Cart-4x4 to 4x4 1.0 - SmartPartsCo www.amazon.com/dp/B00IELPGGU/ref=cm_sw_r_cp_api_i_HH91EbT8DBF4F
I am installing this kit now on mine. Did y’all run into issues with the hubs/spindle nuts fitting? The instructions say to resuse the old nuts and they are a lot smaller and the hubs seem a little loose on the new spindles
Bill the pre - 2000 year DS models are different products I believe, I’m sure you’re aware. The look will still be the same though. I love the stance of it with the spacers, they make a difference.
@@jacobyoung3160 Jacob , I just finished the Madjax 6 inch lift , my wheels are very similar to yours , i used 2" wheel spacers , looks awesome ! I have the whole body off for paint , Kandy fire orange over silver , hope to have that done by this w/e . I'll try to let you see it when i'm done !
I just put the same lift on my Dad’s club car ds. Did the exact same thing with the ground wire too. That looks awesome.
Q+qq
What exact size tire / wheel combo / rim offset , did you use with this build? I see you added a 1.5" wheel spacer. Love the look.
I have a list of all the parts in the description
Bro, that thing looks Sick! What lift did you use ?
Jacob what's up I'm a linesman down in FORT LAUDERDALE FLORIDA I work for VIKING UTILITY I have a cart just like yours I'm looking to lift it what's the name brand of the one you have ?
Hey bud. Check out the videos description, it has all the parts I used in the build
What's that brand of that lift kit and what web site did you order it from
Did you use the same hubs in the front or did you have to get new hubs ?
What kind of leaf springs? Did they come with kit?
You can see the list of parts in the video description
Hey jacob i just put a very similar lift as yours.. did you notice the rear sitting much taller then the front (raked)? TIA
The rear is slightly taller while unloaded. When passengers or cargo is loaded and the springs are under tension, the cart levels out.
Sweet. How much did you get the stock cart for? I like the green
It was around $3000, yeah - I like it too, it grew on me
What brand lift did you use?
Chad Pope Club Car DS 1982-2003 Electric &1997-2003 Gas 6" Double A-Arm Golf Cart Lift Kit www.amazon.com/dp/B079Q874RV/ref=cm_sw_r_cp_api_i_vP7LEb0EB4ZCE
Jacob Young Thansk for the link. Cart looks awesome
Chad Pope thank you!
Would this lift work on an AG? All I see are ds and nothing AG specific
Older Club Cars are either a DS or a Precedent. If you mean you tag starts with an AG then that is a DS which is the same in the video.
www.performancepluscarts.com/club-car-year-guide/
does it require removal of the front end like you did, just asking, because i swear i saw another video where he didnt remove it!
Eloy Gonzalez Jr for that particular lift kit, yes
7:40 been there, not fun
Looks GREAT .. where them wheel spacers yall put in ? If so what thickness and where from ?
Ken it was a 2” aluminum wheel spacer kit - 1” per side
(4) 2" (1" per side) Wheel Spacers EZ GO EZGO Club Car Golf Cart-4x4 to 4x4 1.0 - SmartPartsCo www.amazon.com/dp/B00IELPGGU/ref=cm_sw_r_cp_api_i_HH91EbT8DBF4F
I am installing this kit now on mine. Did y’all run into issues with the hubs/spindle nuts fitting? The instructions say to resuse the old nuts and they are a lot smaller and the hubs seem a little loose on the new spindles
No, I don’t recall having any issues with the spindle nuts
My favorite part was where they showed 0 process on the rear 👎🏻
Looked like you put spacers on the front hubs ?
Bill they are on both front and back
Jacob Young
picking up a 99 electric model DS tomorrow and I would like to do the same lift and tire combo .
Bill the pre - 2000 year DS models are different products I believe, I’m sure you’re aware. The look will still be the same though. I love the stance of it with the spacers, they make a difference.
@@jacobyoung3160 Jacob , I just finished the Madjax 6 inch lift , my wheels are very similar to yours , i used 2" wheel spacers , looks awesome ! I have the whole body off for paint , Kandy fire orange over silver , hope to have that done by this w/e . I'll try to let you see it when i'm done !
Bill can’t wait to see it! I bet those 2” spacers will make it look really stanced, probably going to look sick