Just cut the cigarette lighter adapter that comes with the lights. All you need is ground and power. Ground is obvious; you could find one always everywhere on the car.(Factory grounds) just tap into one. Power wire you’ll probably need extra power wire depending where you decide to mount the light motor. Crimp or solder extra wire if needed for length to reach your fuse box. You’ll also need an add a fuse to tap into something that turns on with 12v with the car. Look for anything that is 10amp and you have to fuse it with a fuse lower than the fuse you decide to use. For example I tapped into a 10 amp fuse so I use a 7.5 amp to power the lights! The install is fairly simple. You could also look up on videos on the add a fuse to learn more.
Yo so the fuse I’m tryna tap into my dodge charger is the cigar lighter (selectable ) 20Amp . So I can use the fuse tap 2-10 amp on the that fuse I’m tryna tap into ?
Hi, I have a question. If I have automatic headlights, would it be possible to connect it to dipped headlights as well? if it's just dark and my light switches from daytime to dipped beam, the starry sky would also light up. Thank you for your reply
Exactly how I did it. You can cut either one. The house plug or the cigarette lighter plug. And I just matched the fuse that I was sharing with. I think it was 15 or 20amp fuse.
And thx bro doing my headliner now just tryna get prepared for the location and wiring of box to fuses. Good video though 💯 follow me ig BigScatpack69.
@@srt_392__ my star light kit came with a cigarette lighter plug but i dont think its long enough. how can i wire it directly to my cigarette plug because i wouldnt like to have it plugged in looks tacky. thank you.
@@eatmoreeats9566 as long as you can get behind the cigarette lighter then you can wire it in from behind. If you can’t then you need to extend the wires with a like size or bigger size and connect it to you fuses like I did in the video
@@itsfellaj you can keep the size of the wire small. There is not a lot of current being used so anything you find at the auto parts store will be big enough
Hi I’m doing this for my 2013 Dodge Charger it is the same way like your challenger but I’m very confused why does it need a ground wire? Can I just connect the light box to the battery and fuse #12 ?
Happy to say no issues what do ever with the items I bought from shine innovations. I have done this to 3 of my own cars now and they turn on every time i turn on my car.
Video would be great if the audio wasn't cutting in/out.
Brah I just noticed that. Something has to be up with my phone. My hands didn’t cover the mic at all
Lol it’s the government
Just cut the cigarette lighter adapter that comes with the lights.
All you need is ground and power. Ground is obvious; you could find one always everywhere on the car.(Factory grounds) just tap into one.
Power wire you’ll probably need extra power wire depending where you decide to mount the light motor. Crimp or solder extra wire if needed for length to reach your fuse box. You’ll also need an add a fuse to tap into something that turns on with 12v with the car. Look for anything that is 10amp and you have to fuse it with a fuse lower than the fuse you decide to use. For example I tapped into a 10 amp fuse so I use a 7.5 amp to power the lights! The install is fairly simple. You could also look up on videos on the add a fuse to learn more.
Yo so the fuse I’m tryna tap into my dodge charger is the cigar lighter (selectable ) 20Amp . So I can use the fuse tap 2-10 amp on the that fuse I’m tryna tap into ?
The mic is frustrating to listen to😭😭
Yea man idk what happened the phone flipped out but i didn’t know until I uploaded it.
Facts kept cutting out when he was dropping the most important words😂
@@srt_392__your good bro shit happens
I randomly find mines on by itself when I got to my car I have them connect to the cigarette lighter fuse box any idea why it happens ?
Hi, I have a question. If I have automatic headlights, would it be possible to connect it to dipped headlights as well? if it's just dark and my light switches from daytime to dipped beam, the starry sky would also light up. Thank you for your reply
What size fuse you use for the lights next to the other fuse in Challenger?
wouldn't putting a 30 amp on a 15 amp fuse make it blow?
I’m not drawing that many amps
Would I blow a fuse if I put a 20Amp fuse on 2-10A tap fuse ?
Aye I got a charger what 2 fuses you use?
What fuses did you use for the challenger a 20 and what’s the other one my lights keep over loading
I used the same size for both. The lights I believe only draw like 6amps so a 20amp is more than enough. Something else must be going on
Too much amp go down 10
Looking for an update, any issues so far? I’m getting mines done too
I have had no issues in either car. They just work, all day every day
@@srt_392__ That’s bro appreciate the reply 💯💯
What size wire did you run to the battery
And did you cut the cigarette lighter part off then split the wiring for the extension fuse?
Exactly how I did it. You can cut either one. The house plug or the cigarette lighter plug. And I just matched the fuse that I was sharing with. I think it was 15 or 20amp fuse.
So a 20 for lights and the regular 20 that's already there is coo?
And thx bro doing my headliner now just tryna get prepared for the location and wiring of box to fuses. Good video though 💯 follow me ig BigScatpack69.
@@srt_392__ my star light kit came with a cigarette lighter plug but i dont think its long enough. how can i wire it directly to my cigarette plug because i wouldnt like to have it plugged in looks tacky. thank you.
@@eatmoreeats9566 as long as you can get behind the cigarette lighter then you can wire it in from behind. If you can’t then you need to extend the wires with a like size or bigger size and connect it to you fuses like I did in the video
Does it mater what fuse to use on the extra add on cricut??
Another questions what power wire size recommended ?
A 15amp fuse will be enough.
@@itsfellaj you can keep the size of the wire small. There is not a lot of current being used so anything you find at the auto parts store will be big enough
@@srt_392__ gotchu man thanks !
Hi I’m doing this for my 2013 Dodge Charger it is the same way like your challenger but I’m very confused why does it need a ground wire? Can I just connect the light box to the battery and fuse #12 ?
Hashy313 you have to have a power and a ground. Period. You can ground anywhere you want
Race , Street , Show ok so what do I connect the negative too?
Hashy313 go to 5:55 on the video. Shows where a good place to ground the wire is
Race , Street , Show yeah I just saw it ok so connect the ground to the black long wire from the light box
Race , Street , Show and then the red wire I would connect that to the battery
How you connect to amp?
Any updates or issues to date with either your wiring or lights????
Happy to say no issues what do ever with the items I bought from shine innovations. I have done this to 3 of my own cars now and they turn on every time i turn on my car.
@@srt_392__ appreciate it…I’ll be doing a project soon
Hey bro love you channel .. but could you help me out with my starlight ? I have a 2019 Honda accord
What do you need?
Great sound
MIKE CHECK - OK ?
Bro the audio is so bad
should of painted that tan plastic
Headliner looking ashy af 😂😂😂
Sound cutting in and out need to make a new video fix your audio. Sounds like crap.
The audio is trash on this video my guy!
Yea man idk what happened