I also use the tdi for jogging. I wear it iwb at 6 o’clock so I can grab it with either hand. It’s out of the way and doesn’t bounce around. If you give it a rinse after your each run and spray it with wd40 every other week or so it’s pretty rust resistant. I got one spot of discoloration on the each but just honed it off with a ceramic rod.
Probably my favorite running knife is my Cold Steel Air Lite Drop Point. It is, as the name suggests, very light. In fact, it's light enough to wear with gym shorts or track pants, with almost no footprint and no drag, but wait, there's more! It also 1) has a very usefully-shaped, relatively stout, 3.5-inch blade, 2) is made from a good budget stainless steel that is tough, but pretty easy to maintain, 3) has a handle that is comfortable for most EDC cutting tasks, but can even get some harder outdoors things done, in a pinch, and 4) sports a Tri-Ad lock. The result is a SUPER tough, easy-to-maintain, useful-for-almost-everything, almost weightless, very concealable knife. It's made for jogging.
@@prodlilbooger it is, and therefore doesn't provide a solution for the person who asked about a fixie for running. I'm just sharing my own take on a knife for running/hiking.
My sensei had lots of technical knowledge and experience from training in Japan and the Israeli army but he always told us that if you don't and you're defending yourself or others: " _The most important thing is to not get your weapon taken, be non-lethal if you reasonably can, and if at all possible - run._ *And when in doubt, hold onto the knife with all your strength and aim for the neck.* "
Crkt's minimalist series is really hard to lose your grip on. As of now, only knife I had when shit was about to go south. Absolute confidence in hand, I used to foil fence, always w/ a pistol grip competitively; it had similar ergonomics to allow me to snap into position, legs and arm, via muscle memory. Luckily it was quite dark and the one closest to me asked if I had a gun aloud. The 2 rushing up from the car, car they pulled over in after seeing some guy alone in the middle of the night, parroted "what he has a gun?!" And reversed their sprint. I hadn’t even popped the sheath off. Later would have a as I saw them drive away only to circle back once my heart came to a resting pace. Was chased. Had to stand off again because like last time, I couldn’t out run. They didn’t get out of the car this go around. Just screamed for awhile. before driving off. I wisely sneak home because I realized they would likely circleback. Believe it was so. When I saw a light pass I ran into my home from the back. Locked the door. Filed a police report, boys in blue always helpful. Said they'd send a cruiser. I looked. They didn’t. Lol.
If you take out a blade, it is already beyond lethal/non lethal. You have already made your choice and if you are in Israel chances are that you will go to jail or get shot by a bystander/cop.
SOCP Dagger I think is the all around self defense shown. The ring is the key. Even without training, You need just a level head and stay calm as possible. Like I said the ring It can be used to impact or strike without going poke poke. The bridge of the nose and around the eyes are the best spots to hit
As someone who works in big city at night I think range is super effective if a confrontation is inevitable you can have a 5 inch knife but a crackhead with a broom stick prolly gonna win if he’s motivated and healthy/capable enough to swing hard lmao
I just want to thank you for your interesting and informative videos. The production values are high, and the interaction between Thomas and David add a lot. Good job!
Cool choices. Dig cold steel for the bang 4 buck value. I carry a civivi d2 elementum fixed blade in a scout carry behind the back. Love the terzuola clip. I keep the blade oiled, as d2 is not corrosion proof.
I've done a lot of knife training, and the one thing that my instructors have always drilled into people is this: There are two types of people in a knife fight; Leakers, and Gushers. You will always get cut, it's up to you to determine how much blood comes out. The majority of people who you could encounter in a knife fight self defense scenario are going to A) not be trained in knife fighting, and B) probably are carrying some junk kitchen knife they bought or stole from the dollar store. These people are going to be unpredictable(AKA wont fight like your sparring partner), and possibly have other hazards upon their person that you want to avoid (disease, needles, etc), and likely are not going to be alone. This last point is pretty critical to understand and acknowledge, and train for. PS I wear a kabar TDI in a modified sheath as my self defense blade
I wound up homeless in 2021 following a work accident in 2020. One of the last purchases I made before losing my income was a TDI. Little dude was my security blanket during the month or so I was actually sleeping outside. Never had to actually use it, but the handful of close calls, definitely made me feel better about evading/running. I have had time to fiddle with this knife and I can have it out and going at a target in no time. I have absolutely no problems running from trouble, but it helps knowing I have something waiting if they chase me 👍🏻
I carry a kabar, great for can opening, cleaning fingernails, batoning and feathering wood, OK in a pinch for a flathead screwdriver. But as far as self defense goes, *if I'm using my knife, something went wrong; get a gun, the great equalizer.
@@NoReply28 Yes. Any cut is bad news, so your goal is to avoid it above all else. If you're in an encounter where things go that far, you might have to trade a cut for a kill, taking the hit so as to stop your attacker, but never anything less than that.
I own and carry the Kabar TDI, I also own the TDI USSF Astro MP. AUS 8 gives good corrosion resistance and pretty good edge retention as well. The coating on the blade also provides extra corrosion resistance.
Regarding ceramic bladed knives, I purchased a 5 or 6" version from "Harbor Freight" store for about $6, which was fully adequate for awhile, until I tried to hone the edge for a touchup. It was all downhill for me from there. I ended up just breaking the blade on purpose as a destructive testing clinic for myself, as I ruined the edge. No more ceramic blades for me.
My kbar Leo goes with me everywhere. It’s easily ambidextrous and super sharp. Im a righty so carry it left side appendix. If my right hand is getting my weapon, the left hand can easily use the kbar with that angle. Love it. Very natural and light.
Cold Steel sells sheath mounting systems in 2 sizes. They say these are designed to fit a lot of their knifes. I have both sizes and they have lots of slots to fit a wide variety of sheaths. Cheap too.
Mirror polished edges are for show on a working knife. Cutting meat, just look at a butcher's edge, 400 to 600 grit. Filet knife has to have a less than polished edge if you plan to skin the fish. I found out in the 70s that a knife can be too sharp for the task when I went to skin fish and the blade just cut right through the skin instead of along it. I re-sharpened my knives with the 400 grit water stone, worked fine as I proceeded to filet about 400 lbs. of fish on my first charter as deckhand.
Question about sheaths/fixed blades… I’ve always been more into folding knives except for a few larger blades used in the garden or camping etc. Starting to dip my toe into EDC-ing fixed blades. I like the idea of fixed blades but the one thing that always gets me is gunk on the blade. Eg if you cut a box up with a folding knife and go through some tape or outdoors and get tree sap or fish guts on it. You can mostly operate it one handed, fold it away and use both hands to continue doing a task. The blade is obviously between the handle scales and gunk on the blade stays on the blade. With a sheath knife for example, if one hand is in use and you only have your other hand to use the knife. You get gunk on the blade but suddenly need both hands to do something so you go to put your blade away. All the gunk is then transferred into the sheath and will probably be extremely hard or impossible to clean completely. I have put some major scratches on my Rockstead Chou wave because there was sand stuck to the gunk which got transferred inside the sheath. I’ve also recently acquired a Winkler belt knife but reluctant to use it on anything but dry materials on dry days because the sheaths are lined with felt and a blade steel probe to rust. Do you have any pro tips? since the only alternative I can think of, and is mostly not practical is that you simply do not resheath until you have cleaned the blade. Which sometimes just isnt possible in the field. Or in between jobs etc. sorry for the wall of text. If this issue is worthy of discussion in one of your videos please feel free paraphrase. Edit: I have a couple of Moras which are so inexpensive they are more or less disposable. And a cold steel san Mai kukri. Which for some reason doesn’t bother me one bit to completely abuse. That thing just shrugs it all off.
David you forgot about the Benchmade Nimravus which I was shocked they still make all these years later. It was one of my first two Benchmade knives I bought at age 17 before going off to the military and later deployment. I carried them both and used them hard for a few years without ever failing me. Both are now retired but in my collection and in great shape and were the reason I continued to buy from them.
As an Army DACP (after I got out of being an MP) I carried the Ka-Bar TDI for my entire career. Stayed on my liner belt when at work. My wife stole it so often on my days off that I bought her one, now my 16yo son carries his (it’s Oklahoma, everyone carries), my mother and mother in law both carry one, and my father who is still a Fed LEO just recently started carrying one. I’ve got a CRKT Obake that is my other defensive fixed blade and alternate between the two.
I’ve found the best fixed blade for self defense either with/without carrying a firearm is the Skallywag Tactical Dagger in D2 steel or aluminum. It has a bigger ring than the SOCP Dagger which helps with deployment when wearing gloves, has a sheath that’s MOLLE compatible, is primarily for stabbing (not slashing and is based on the design of the Hoplite spear), and if you’ve trained in rudimentary boxing (especially with the Philly Shell stance) will work with your body mechanics very well.
When using knives as self defense, please take classes that specifically involves knife defense. Like with any self defense weapons, the tool wont do much unless you have some basic training in using those tools.
I'm taking classes since a couple of years. It's quite difficult, but awesome. If you're carrying a knife as a last self defense option, you should know how to use it.
@@QuantumMechanic_88 I’m that instructor that you are looking for (Krav Maga)!! In Afghanistan I whipped out my super duper combat knife of doom and cut open the wire of an ammunition tin. Can’t beat credentials like that my boy 😜!
Hi David (and Seth if that helps), My first question was answered brilliantly, so here I go again! Hope you can help me out with another one similar to my 1st question: I'm looking for a folding knife, with the following features: 1) Flipper (that becomes a "guard") 2) Axis or Similar Cross-Bar Lock (**MUST** be bank-vault, bomb-proof strong) 3) Thumb Hole, either oval or round, doesn't matter, but **MUST** have it... 4) About 3" or more Blade Length 5) Pointy, not Wharncliffe, but needs some belly. 6) Optional, but would be game-winning: Full Flat Grind, finger choil, assist or bearings in the pivot and Deep Carry Pocket Clip 7) See if you can recommend me a budget and a premium version each. Thanks so much!
CRKT Keramin deserves a spot on one of these videos as well also the Spyderco Emerson Matriarch 2. Love these types of videos either way.... What I carry for opening boxes isn't what I carry for defense..... I enjoy seeing all of the options out there.
Self-defence knives need not always have to be fixed blades, but if one is optimizing their knife doctrine, fixed blades are by far the better choice due to reliability- just like why experts suggest Glocks or M&Ps because they are striker-fired and without a safety for optimal simplicity and reliability above all- which is what makes it a tactical choice.
Was going to mention, for light scratches, you could try using something like Flitz (or many others) metal polishing compounds. They're super easy to use. Comes in a big toothpaste like tube and also has the consistency of toothpaste. Squeeze a dab out and put in on a polishing cloth and polish each side by hand for a couple minutes each. It WILL polish the blade, so i don't know if that will actually reduce the scratches or make them more apparent, i suppose it could work well on very faint scratches but I've used to polish a couple new knives i had to give them a finer finish on the blade and it works well. I've never used it to try to reduce scratches though but i think it could work. Some brands have a finer grit which works good to polish and bring more of a mirror finish on blades and some have a rougher grit which is better to even out imperfections and scratches.
Perhaps feature Cold Steel's Safe Maker series sometime in the self-defence category? Like the TDI; anyone with even a little experience can make good use of them. They fit great as an appendix carry. I'm a big fan. Conversely, I can't understand knives with rings on them, like that Benchmade. They seem like a great idea, until you actually try to use them. Moreover; unless you are trying to pierce plate armour in the fourteenth century, a reverse grip is just making life difficult for yourself.
A reverse grip actually has some advantages to it, and karambits were historically often used with a ring in that position (and no, not to pierce armour, that wouldn't even work). You have less reach, but you can generate more power due to biomechanics. It's also more natural because you strike as you would with a fist. The ring may be uncomfortable, but it adds security to the grip and when you're defending your life comfort isn't my main concern.
@@NoNamer123456789 Good selling points but for me, that's all it ever was: marketing. A karambit is a martial arts weapon, by which I mean, it's not relevant for most people. That lack of reach you mention, is everything. If you've got a knife, anybody skilled will be targeting the hand that's holding that blade and it's a lot easier to destroy the extremities if your blade is point down. I used to get students to fight each other with felt tipped pens. Sixty seconds and you realise that a reverse grip is a poor choice. I understand the body mechanics of karambits but they're not relevant. An unarmoured human has practically no resistance to a sharp edge in the first instance. Just my opinion.
What you say is true for untrained. In fact every thing he picked shows he isn't trained. I find it funny when a knife sales guy thinks he understands self-defense. Any knife can work but there is many better choices. But training is more important then blade.
@@deceptivepanther I mean I only wanted to state that a reverse grip isn't just BS, and it was actually used. You have a bit less reach, but that's assuming you and the attacker have the same knife. That can be equalised with a longer and curved blade. I guess if you find yourself in a situation where you're threatened with a blade, there's a good chance the attacker isn't trained and wildly attacking, which strengthen your point. Also, when wearing thicker clothing (like in winter), it can reduce the effectiveness of slashes, especially if the knife isn't as sharp or hits at an angle or w/e. Stabs will still work with a bit more force needed.
Hey DCA, love the FAQ videos where we get to see some classic edc choices. Lately I've realized that as my collection of modern folders grows, blade thickness has become one of my most important criteria when choosing a new knife. My preference for thin and slicey blade stocks is part of the reason I edc traditional slipjoints along with my modern folders. My question is, would you consider having the boys at the lab add blade thickness as a filter option when searching for knives on the KC website, just as you would for things like blade shape and material?
lol I like that intro - I'd love a video specifically on rescue knives. I'd love to find a great knife with assisted opening of any type as well as a glass breaker and seat-belt cutter. Thank you!!
So glad to see Benchmade redesigned the clip on the sheath! The original version was kind of unadulterated junk. Question, have the addressed the finish? The older version of the SOCP dagger used to have hard 90 degree edges. I sanded mine down to round them and it’s much more comfortable.
My backup knife for self defense is a sog seal pup. My main line of defense is my beretta apx. My backup folding knife is a crkt fossil. Got to stay prepared.
There is no such long as a "Self Defence Knife'! I sent some pictures of knives to my Kali teacher. His reply" It's a knife" :) Having said that, what I look for : Quickness of:deployment, handle, strength, pointy, sharp.
I've designed small tanto knives that I carry crossdraw, I also wear a number of knives scout carry and they're concealable The tanto prodigy and the strongarm by gerber, The becker bk16, The kabar Snody big boss. I've even worn the gerber mark2 scout carry
I just received my new honey badger large. N amazing action! Very nice knife n the price is amazing!!! Im positive I'll be buying one of each size n probably then. Some great knife n very nice packaging n information with knife. Just great all the way around!
Vargo makes a titanium/ceramic matrix blade that is tougher than just plain ceramic. I have a foder with it and it works fine. Use it to cut cardboard etc. just as an alternative. Also it will never rust or corrode.
Help. I just bought a 4 inch cold steel Kris Ti-lite. I need to think of EDC tasks to justify the purchase. What sort of edc tasks would the wavy blade be good for? Pocket bread knife maybe?
Regarding the attachment options for the CS Mini-Tac style knives, I have used the "Blade-Tech Quick-E-Loop" attachments for nonstandard sheath hole spacing with great success.
A big part of using a knife for self defense is being able to conceal it. Not enough emphasis is put on the sheath and the attachment of the sheath to the belt, especially horizontal belt carry? How about doing a video about fixed blade horizontal belt carry and concealability?
Love your videos. Recently got into knife collecting after a very generous gift. Which fixed blade would you suggest for someone who is more into small folders? Thanks for all the content! This channel has been a gateway to this hobby 🙂
I have no problem with D2 steel knives. You could even call me a D2 fan. I have a pair of Benchmades that have peeled and butchered several bears, a couple of wild beef cows and a couple or three moose. I have yet to get a speck of rust on the blades. The skinner went through one sand-encrusted bear, a moose and a two beef cows before I touched up the blade. The bears and cows were in a marine climate.
For the running bushcraft folks I’d turn to some of Matt Graham’s designs with Condor and Tops, that’s his specialty and the lil’ bugger from Tops seems especially apt for both running questions
Just a suggestion I think it might be useful to have a ruler and a pocket scale on set, though I get that most information is on the site, though not everyone lists the weight of just the knife without the sheath and all the other variants (kydex, leather, nylon sheaths, etc).
For a functional light fixed blade, the crkt spew came to mind. I like the minimilist range but the spew hovers in my "to get " list. Seems versatile for cutting or poking.
Pretty well the whole of the crkt line-up makes me want to spew so it seems unfair to limit the name to a single knife. (Actually, I just googled it and that might be the first crkt knife I genuinely fancied.)
The Ka Bar Tdi is nice I highly recommend buying a Kydex sheath that one is garbage. The Socp is awesome and it’s sheath offers so many different ways to carry it.
3:00 Tasos should consider pepper spray. Much better for self defense against dogs and other animals, not to mention it is non lethal. Same goes for 5:58 .. that little knife won't help you to get rid of coyote fast, pepper spray will.
How about a car camping knives setup? Maybe low-low cost, bargain, midrange and "fancy"? I don't hunt or do much more than build a fire and cook and hike on marked trails. I usually take a hatchet along for producing kindling, and I bring a box of firewood which is enough for 2 evening fires. I cook on a gas stove, mainly, though I do have grates and cast iron for cooking over a fire. I'm thinking 3 or 4 inch folder or pocketable fixed blade, a 5 or 6 inch blade for bushcraft stuff, and for some foolish desire, I think an ESSE would be interesting, not that I'd ever do anything that called for such.
Not sure on the folder, tho the Spydiechef is sure to be the recommendation, but you should ABSOLUTELY buy an ESEE. I was kind of like you, never thought I'd use it as intended, but I keep my ESEE 5 and a dead blow hammer on the back porch to split wood for the fire pit these days. Also have a 4 in S35VN and the 6, all with contoured handles. Find the one you like, buy it, and beat the living snot out of it. Its highly satisfying.
I’m not sure if anyone else mentioned it but you can actually flip that clip to invert it on the cold steel peace maker 2 & 3 it is a little tough to do but I’ve done it myself
Hey David got an actual question, normally I am just commenting for algorithm... Why aren't more companies making knives out of 14C28N Sandvik? I see Nitro V blowing up everywhere as the top budget ingot and yes it demolishes 8Cr14MoV, it just doesn't hold an edge... Ok I guess I couldn't get by without at least one pun
12C27 and 14C28N are Swedish steels and 8Cr14Mov is Chinese. I can only imagine the cost of raw materials for making thousands of knives plays a huge role.
@@Ericstraordinary Not to mention shipping costs for that much steel. Guessing its a lot cheaper shipping from China for all the manufacturers in asia...china included.
Imo you missed one of the best one of the most versatile fixed blades out there. The bark river bush bat. Light, nuce alignment for day to day cutting and bushcraft but also has a finger loop for defensive retention
They don't carry Bark River any more. Most likely because the owner is unethical and has screwed over everyone in the knife industry he's run across including Becker and Reeve as I understand it. They're also famous for "mislabeling" steel. As in you pay a premium price for premium steel and get a knife marked saying it is that steel, but its actually some basic tool steel that rusts...even though you paid for stainless. Plenty of documentation out there, I would never give my business to Bark River, despite some gorgeous knives they make. DCA has mentioned "if they ever catch a knife maker mislabeling steel they'll be out the building fast" and I'm pretty sure that was a reference to Bark River, who they used to sell. Very few places sell Bark River anymore. That should tell you everything you need to know.
David, picture that Ka-Bar TDI clipped into a duty belt, left side, behind the other stuff on the belt, handle angled forward. Officer in struggle for his gun or getting piled onto, grabs the TDI with his off hand, blade projecting below is hand with edge forward. As he punches his hand forward and across, pretty mich any part of his opponent it hits will suffer. With luck, he hits a carotid artery. It’s a Get Off Me knife.
Cold Steel SR1 Lite is good for self-defense but a little big (not good for small hands but would be very effective if necessary. Shit can the pocket clip they're junk and a pocket destroyer. 😂 Thank you, David, for the helpful review. 😎👍
Also if someone doesn't like scratches on their blade they could always stone wash it. I mean yeah stone washing makes alot of scratches but I makes it looks alot better than like one or two scratches on a blade and you can also stone wash any kind of blade with any finish for the most part.
I enjoy these Q&A type videos. Very cool. I've got a question... Not sure if I'm able to say this correctly, but my question is: are blade serrations really any more effective (on certain materials, as some claim) than a 'properly' sharpened plain edge? My personal experience is that serrations 'saw' through stuff long after the plain edge of a knife is dull, and that gives people (who can't/don't maintain a proper edge) the impression that the serrations cut some materials better. I maintain that an appropriately sharpened edge cuts as well or better than one with serrations. (The only exception would be something hard and plastic, like a zip tie - but with proper leverage, even that is debatable, I feel.) Care to weigh in on this? Thanks!
I have had a.life time of of knife carry. Military, chef, knife sharpener, guiding and for the last 6 years Kali. My pocket and combat knifes of choice have serrations. Will go through anything and right through anything else. Having said that for hunting bushcraft and kitchen a sharp plain edge. I have some 2 hundred plus knives, when I walk out the door it is usually with a serrated/partially serrated blade.
Hey dca what victorinox large with a lockable blade would you use for edc? Because I live in Greece and knife laws say that you cant carry kives unless you have a professional or good excuse to carry one
Every knife you took to defend yourself should be familiar to you. This means that a training version of such a knife is needed to safely train the defense skill with a sharp knife. It's strange that you haven't discussed this topic.
Great review DCA, no love for the horizontal belt buckle carry? My EDC is a Ka Bar Turok, just hafta offset buckle, to me much more intuitive and comfy.
Here’s a question for DCA/Seth: I’m looking towards a compression lock system to add to the collection, but I really would prefer to keep cost as low as I can. As I’m certain its a design still exclusive to Spyderco, I’m aware that they’ll still be expensive, but what would be the cheapest example I could get my hands on? Thanks for the content, always learn something new here.
A couple other great ones in the way of fixed blades are the pika karambit by Fox and Bastinelli and the talon from 511 designed by Doug Markida (probably spelled his name wrong lol). Good quality karambits in general are great for self defence and there's a folder version of thr talon with the bramp (wave like feature) and of course the many great ones from Fox. To me any folding knife that you're using for self defense should have a pocket deployment feature. Yes even over an auto even if its legal to carry. A pocket deploy is just straight up faster to use than anything else in the way of folders. And personally for a fixed karambit I'd say to go traditional and go on the smaller side (2 to 3 or 3.5) rather than one of those huge ones. Along with taking classes on how to use them correctly. Obviously a knife is gonna do damage. But knowing how to utilize it correctly is always gonna be better than just winging it.
@vorpalblades oh ya I'm sure you're a bastion of knowledge over people who actually know shit, practice, and study these things rather than sitting on their asses making playlists and talking shit.
I’m not sure if you could do this because I’ve never owned one and it might be painful because the plastic of the sheath might dig into your finger but you could pull the whole thing out of your waistband and use it kind of like a kubaton so that it’s not so lethal at first and then if you can’t stop your attacker like that or they try to grab it away from you then what they’ll actually be doing is pulling that sheath off for you. It’s probably not made to be used like that but that would be a great idea because once you’ve got the ring in your hand you’re not gonna lose the knife and you could begin with something that’s a little less life-threatening if your attacker is kind of lightly trying to kill you. Is there such thing as somebody lightly trying to kill you? Maybe they’re just trying to beat you up for something and if you can get them off you using some thing that doesn’t have a blade think it’s better. Because if the cops come and you’re the one with the knife you’re the one going to jail until you can prove that that person was really trying to hurt you
Hello DCA, can you go over the different types of micarta? I know it’s hot right now and want some clarity on linen, canvas, burlap micarta, and terotuff?
@@jerrypomroy2375 He did, but I think it was more like a month or two back. As to the question, micarta is made of fibrous material stacked with resins and compressed. So linen micarta is literally layer of linen stacked in resin and compressed, same with canvas and burlap.
Hey DCA great content, always look forward to the weekly uploads. What would you recommend for a daily EDC with a 3 to 3 1/4 blade, locking, lightweight with pocket clip that would double as a cigar cutter? Prefer high end materials with a price no more that $300. Thanks.
This man is 100. Always soft spoken and informative. I love this channel.
Lol yeah cause a 2 inch karambit style is good against a pack of dogs 😂😂😂😂 the guys a pud
I also use the tdi for jogging. I wear it iwb at 6 o’clock so I can grab it with either hand. It’s out of the way and doesn’t bounce around. If you give it a rinse after your each run and spray it with wd40 every other week or so it’s pretty rust resistant. I got one spot of discoloration on the each but just honed it off with a ceramic rod.
Probably my favorite running knife is my Cold Steel Air Lite Drop Point. It is, as the name suggests, very light. In fact, it's light enough to wear with gym shorts or track pants, with almost no footprint and no drag, but wait, there's more! It also 1) has a very usefully-shaped, relatively stout, 3.5-inch blade, 2) is made from a good budget stainless steel that is tough, but pretty easy to maintain, 3) has a handle that is comfortable for most EDC cutting tasks, but can even get some harder outdoors things done, in a pinch, and 4) sports a Tri-Ad lock. The result is a SUPER tough, easy-to-maintain, useful-for-almost-everything, almost weightless, very concealable knife. It's made for jogging.
it’s folding
@@prodlilbooger it is, and therefore doesn't provide a solution for the person who asked about a fixie for running. I'm just sharing my own take on a knife for running/hiking.
My sensei had lots of technical knowledge and experience from training in Japan and the Israeli army but he always told us that if you don't and you're defending yourself or others:
" _The most important thing is to not get your weapon taken, be non-lethal if you reasonably can, and if at all possible - run._ *And when in doubt, hold onto the knife with all your strength and aim for the neck.* "
Crkt's minimalist series is really hard to lose your grip on. As of now, only knife I had when shit was about to go south. Absolute confidence in hand, I used to foil fence, always w/ a pistol grip competitively; it had similar ergonomics to allow me to snap into position, legs and arm, via muscle memory. Luckily it was quite dark and the one closest to me asked if I had a gun aloud. The 2 rushing up from the car, car they pulled over in after seeing some guy alone in the middle of the night, parroted "what he has a gun?!" And reversed their sprint. I hadn’t even popped the sheath off. Later would have a as I saw them drive away only to circle back once my heart came to a resting pace. Was chased. Had to stand off again because like last time, I couldn’t out run. They didn’t get out of the car this go around. Just screamed for awhile. before driving off.
I wisely sneak home because I realized they would likely circleback. Believe it was so. When I saw a light pass I ran into my home from the back. Locked the door.
Filed a police report, boys in blue always helpful. Said they'd send a cruiser. I looked. They didn’t. Lol.
If you take out a blade, it is already beyond lethal/non lethal. You have already made your choice and if you are in Israel chances are that you will go to jail or get shot by a bystander/cop.
SOCP Dagger I think is the all around self defense shown. The ring is the key. Even without training, You need just a level head and stay calm as possible. Like I said the ring It can be used to impact or strike without going poke poke. The bridge of the nose and around the eyes are the best spots to hit
As someone who works in big city at night I think range is super effective if a confrontation is inevitable you can have a 5 inch knife but a crackhead with a broom stick prolly gonna win if he’s motivated and healthy/capable enough to swing hard lmao
A fit crackhead will fight all day without stopping for 11 bucks I recommend a Broad sword or Boar spear for crack head related activities.
If a crackhead with a broomstick can take you let alone with a knife your self defense plan should involve sprinting only
For the tanto guy I've went through MANY same carry as u want and I modded a cold steel Kyoto sheathe and that blade has worked best for me..
I just want to thank you for your interesting and informative videos. The production values are high, and the interaction between Thomas and David add a lot. Good job!
Cool choices. Dig cold steel for the bang 4 buck value.
I carry a civivi d2 elementum fixed blade in a scout carry behind the back. Love the terzuola clip. I keep the blade oiled, as d2 is not corrosion proof.
The Cold Steel C clips work perfect for that Cold Steel Tanto. The hardware that comes with it is thin enough to fit in those holes. 👌🏼
That Benchmade SOCP dagger looks great. I love a finger in the ring too.
I've done a lot of knife training, and the one thing that my instructors have always drilled into people is this: There are two types of people in a knife fight; Leakers, and Gushers. You will always get cut, it's up to you to determine how much blood comes out.
The majority of people who you could encounter in a knife fight self defense scenario are going to A) not be trained in knife fighting, and B) probably are carrying some junk kitchen knife they bought or stole from the dollar store. These people are going to be unpredictable(AKA wont fight like your sparring partner), and possibly have other hazards upon their person that you want to avoid (disease, needles, etc), and likely are not going to be alone. This last point is pretty critical to understand and acknowledge, and train for.
PS I wear a kabar TDI in a modified sheath as my self defense blade
I wound up homeless in 2021 following a work accident in 2020. One of the last purchases I made before losing my income was a TDI. Little dude was my security blanket during the month or so I was actually sleeping outside. Never had to actually use it, but the handful of close calls, definitely made me feel better about evading/running. I have had time to fiddle with this knife and I can have it out and going at a target in no time. I have absolutely no problems running from trouble, but it helps knowing I have something waiting if they chase me 👍🏻
The tons a real life incidents involving knife fight that show how wrong that "you will ALWAYS get cut" statement is... But ok.
I carry a kabar, great for can opening, cleaning fingernails, batoning and feathering wood, OK in a pinch for a flathead screwdriver. But as far as self defense goes, *if I'm using my knife, something went wrong; get a gun, the great equalizer.
@@NoReply28
Yes. Any cut is bad news, so your goal is to avoid it above all else.
If you're in an encounter where things go that far, you might have to trade a cut for a kill, taking the hit so as to stop your attacker, but never anything less than that.
I own and carry the Kabar TDI, I also own the TDI USSF Astro MP. AUS 8 gives good corrosion resistance and pretty good edge retention as well. The coating on the blade also provides extra corrosion resistance.
Regarding ceramic bladed knives, I purchased a 5 or 6" version from "Harbor Freight" store for about $6, which was fully adequate for awhile, until I tried to hone the edge for a touchup. It was all downhill for me from there. I ended up just breaking the blade on purpose as a destructive testing clinic for myself, as I ruined the edge. No more ceramic blades for me.
Buying from Harbor Fright was the first mistake.
My kbar Leo goes with me everywhere. It’s easily ambidextrous and super sharp. Im a righty so carry it left side appendix. If my right hand is getting my weapon, the left hand can easily use the kbar with that angle. Love it. Very natural and light.
Cold Steel sells sheath mounting systems in 2 sizes. They say these are designed to fit a lot of their knifes. I have both sizes and they have lots of slots to fit a wide variety of sheaths. Cheap too.
Mirror polished edges are for show on a working knife. Cutting meat, just look at a butcher's edge, 400 to 600 grit. Filet knife has to have a less than polished edge if you plan to skin the fish. I found out in the 70s that a knife can be too sharp for the task when I went to skin fish and the blade just cut right through the skin instead of along it. I re-sharpened my knives with the 400 grit water stone, worked fine as I proceeded to filet about 400 lbs. of fish on my first charter as deckhand.
Question about sheaths/fixed blades… I’ve always been more into folding knives except for a few larger blades used in the garden or camping etc. Starting to dip my toe into EDC-ing fixed blades. I like the idea of fixed blades but the one thing that always gets me is gunk on the blade. Eg if you cut a box up with a folding knife and go through some tape or outdoors and get tree sap or fish guts on it. You can mostly operate it one handed, fold it away and use both hands to continue doing a task. The blade is obviously between the handle scales and gunk on the blade stays on the blade. With a sheath knife for example, if one hand is in use and you only have your other hand to use the knife. You get gunk on the blade but suddenly need both hands to do something so you go to put your blade away. All the gunk is then transferred into the sheath and will probably be extremely hard or impossible to clean completely. I have put some major scratches on my Rockstead Chou wave because there was sand stuck to the gunk which got transferred inside the sheath. I’ve also recently acquired a Winkler belt knife but reluctant to use it on anything but dry materials on dry days because the sheaths are lined with felt and a blade steel probe to rust. Do you have any pro tips? since the only alternative I can think of, and is mostly not practical is that you simply do not resheath until you have cleaned the blade. Which sometimes just isnt possible in the field. Or in between jobs etc. sorry for the wall of text. If this issue is worthy of discussion in one of your videos please feel free paraphrase.
Edit: I have a couple of Moras which are so inexpensive they are more or less disposable. And a cold steel san Mai kukri. Which for some reason doesn’t bother me one bit to completely abuse. That thing just shrugs it all off.
Wipe it off on your pants like a normal person and stick it back in the sheath.
T.Kell Nightstalker is my favorite EDC fixed blade for self defense. Or his Nightshade.
David you forgot about the Benchmade Nimravus which I was shocked they still make all these years later. It was one of my first two Benchmade knives I bought at age 17 before going off to the military and later deployment. I carried them both and used them hard for a few years without ever failing me. Both are now retired but in my collection and in great shape and were the reason I continued to buy from them.
As an Army DACP (after I got out of being an MP) I carried the Ka-Bar TDI for my entire career. Stayed on my liner belt when at work. My wife stole it so often on my days off that I bought her one, now my 16yo son carries his (it’s Oklahoma, everyone carries), my mother and mother in law both carry one, and my father who is still a Fed LEO just recently started carrying one.
I’ve got a CRKT Obake that is my other defensive fixed blade and alternate between the two.
You can still find the Nimravus, but they stopped production of the blades a yr or 2 ago.
I’ve found the best fixed blade for self defense either with/without carrying a firearm is the Skallywag Tactical Dagger in D2 steel or aluminum. It has a bigger ring than the SOCP Dagger which helps with deployment when wearing gloves, has a sheath that’s MOLLE compatible, is primarily for stabbing (not slashing and is based on the design of the Hoplite spear), and if you’ve trained in rudimentary boxing (especially with the Philly Shell stance) will work with your body mechanics very well.
When using knives as self defense, please take classes that specifically involves knife defense. Like with any self defense weapons, the tool wont do much unless you have some basic training in using those tools.
Good luck finding an instructor who has actually used a blade in combat .
I'm taking classes since a couple of years. It's quite difficult, but awesome. If you're carrying a knife as a last self defense option, you should know how to use it.
Or find some lessons on youtube and practice on your friends.
Duh... but if attacked by wild animal, flailing with a knife is better than flailing without one.
@@QuantumMechanic_88 I’m that instructor that you are looking for (Krav Maga)!!
In Afghanistan I whipped out my super duper combat knife of doom and cut open the wire of an ammunition tin.
Can’t beat credentials like that my boy 😜!
Hi David (and Seth if that helps),
My first question was answered brilliantly, so here I go again! Hope you can help me out with another one similar to my 1st question:
I'm looking for a folding knife, with the following features:
1) Flipper (that becomes a "guard")
2) Axis or Similar Cross-Bar Lock (**MUST** be bank-vault, bomb-proof strong)
3) Thumb Hole, either oval or round, doesn't matter, but **MUST** have it...
4) About 3" or more Blade Length
5) Pointy, not Wharncliffe, but needs some belly.
6) Optional, but would be game-winning: Full Flat Grind, finger choil, assist or bearings in the pivot and Deep Carry Pocket Clip
7) See if you can recommend me a budget and a premium version each.
Thanks so much!
CRKT Keramin deserves a spot on one of these videos as well also the Spyderco Emerson Matriarch 2. Love these types of videos either way.... What I carry for opening boxes isn't what I carry for defense..... I enjoy seeing all of the options out there.
Keramin is trash. One full strength swing and that tip is broken
Self-defence knives need not always have to be fixed blades, but if one is optimizing their knife doctrine, fixed blades are by far the better choice due to reliability- just like why experts suggest Glocks or M&Ps because they are striker-fired and without a safety for optimal simplicity and reliability above all- which is what makes it a tactical choice.
Was going to mention, for light scratches, you could try using something like Flitz (or many others) metal polishing compounds. They're super easy to use. Comes in a big toothpaste like tube and also has the consistency of toothpaste. Squeeze a dab out and put in on a polishing cloth and polish each side by hand for a couple minutes each. It WILL polish the blade, so i don't know if that will actually reduce the scratches or make them more apparent, i suppose it could work well on very faint scratches but I've used to polish a couple new knives i had to give them a finer finish on the blade and it works well. I've never used it to try to reduce scratches though but i think it could work.
Some brands have a finer grit which works good to polish and bring more of a mirror finish on blades and some have a rougher grit which is better to even out imperfections and scratches.
Hint to runners you can run with a neck knife you need to keep the cord or chain as short as possible. I’m necker weights 1.4 ounces.
My hunting knife is the knives of Alaska elk hunter in d2. I've never had a problem with staining or rust. It sharpens easy and holds an edge
Perhaps feature Cold Steel's Safe Maker series sometime in the self-defence category? Like the TDI; anyone with even a little experience can make good use of them. They fit great as an appendix carry. I'm a big fan. Conversely, I can't understand knives with rings on them, like that Benchmade. They seem like a great idea, until you actually try to use them. Moreover; unless you are trying to pierce plate armour in the fourteenth century, a reverse grip is just making life difficult for yourself.
A reverse grip actually has some advantages to it, and karambits were historically often used with a ring in that position (and no, not to pierce armour, that wouldn't even work).
You have less reach, but you can generate more power due to biomechanics. It's also more natural because you strike as you would with a fist. The ring may be uncomfortable, but it adds security to the grip and when you're defending your life comfort isn't my main concern.
@@NoNamer123456789 Good selling points but for me, that's all it ever was: marketing. A karambit is a martial arts weapon, by which I mean, it's not relevant for most people. That lack of reach you mention, is everything. If you've got a knife, anybody skilled will be targeting the hand that's holding that blade and it's a lot easier to destroy the extremities if your blade is point down. I used to get students to fight each other with felt tipped pens. Sixty seconds and you realise that a reverse grip is a poor choice. I understand the body mechanics of karambits but they're not relevant. An unarmoured human has practically no resistance to a sharp edge in the first instance. Just my opinion.
What you say is true for untrained. In fact every thing he picked shows he isn't trained.
I find it funny when a knife sales guy thinks he understands self-defense.
Any knife can work but there is many better choices. But training is more important then blade.
@@richardhenry1969 True, training is the most important thing.
@@deceptivepanther I mean I only wanted to state that a reverse grip isn't just BS, and it was actually used. You have a bit less reach, but that's assuming you and the attacker have the same knife. That can be equalised with a longer and curved blade.
I guess if you find yourself in a situation where you're threatened with a blade, there's a good chance the attacker isn't trained and wildly attacking, which strengthen your point.
Also, when wearing thicker clothing (like in winter), it can reduce the effectiveness of slashes, especially if the knife isn't as sharp or hits at an angle or w/e. Stabs will still work with a bit more force needed.
Hey DCA, love the FAQ videos where we get to see some classic edc choices. Lately I've realized that as my collection of modern folders grows, blade thickness has become one of my most important criteria when choosing a new knife. My preference for thin and slicey blade stocks is part of the reason I edc traditional slipjoints along with my modern folders. My question is, would you consider having the boys at the lab add blade thickness as a filter option when searching for knives on the KC website, just as you would for things like blade shape and material?
Dave, seems like every time you do one of these "specialty" videos, I end up placing an order... Keep it up!
The TDI it’s perfect 👍
lol I like that intro - I'd love a video specifically on rescue knives. I'd love to find a great knife with assisted opening of any type as well as a glass breaker and seat-belt cutter. Thank you!!
Ask and ye shall receive: th-cam.com/video/zZicbE3JC9M/w-d-xo.html
@@knifecenter perfect! Thanks.
Mini tac for me what a good looking knife 🔪 a really great value at $50.
So glad to see Benchmade redesigned the clip on the sheath! The original version was kind of unadulterated junk. Question, have the addressed the finish? The older version of the SOCP dagger used to have hard 90 degree edges. I sanded mine down to round them and it’s much more comfortable.
This got me thinking: what is the best blade steel and geometry (point/blade/grind) for a self defense knife? Best handle material?
Fox Karambit! With quick deployment. Is my favorite
I have a Mini Tac Tanto that I just wrapped some gutted paracord through the holes to make belt loops.
My backup knife for self defense is a sog seal pup. My main line of defense is my beretta apx. My backup folding knife is a crkt fossil. Got to stay prepared.
👍👍👍😃
There is no such long as a "Self Defence Knife'!
I sent some pictures of knives to my Kali teacher. His reply" It's a knife" :) Having said that, what I look for : Quickness of:deployment, handle, strength, pointy, sharp.
I've designed small tanto knives that I carry crossdraw,
I also wear a number of knives scout carry and they're concealable
The tanto prodigy and the strongarm by gerber,
The becker bk16,
The kabar Snody big boss.
I've even worn the gerber mark2 scout carry
I just received my new honey badger large. N amazing action! Very nice knife n the price is amazing!!! Im positive I'll be buying one of each size n probably then. Some great knife n very nice packaging n information with knife. Just great all the way around!
Vargo makes a titanium/ceramic matrix blade that is tougher than just plain ceramic. I have a foder with it and it works fine. Use it to cut cardboard etc. just as an alternative. Also it will never rust or corrode.
Help. I just bought a 4 inch cold steel Kris Ti-lite. I need to think of EDC tasks to justify the purchase. What sort of edc tasks would the wavy blade be good for? Pocket bread knife maybe?
Regarding the attachment options for the CS Mini-Tac style knives, I have used the "Blade-Tech Quick-E-Loop" attachments for nonstandard sheath hole spacing with great success.
darn it!! why did you have to show that Smith and Sons?! Its so cool, and now its stuck in my head.
A big part of using a knife for self defense is being able to conceal it.
Not enough emphasis is put on the sheath and the attachment of the sheath to the belt, especially horizontal belt carry?
How about doing a video about fixed blade horizontal belt carry and concealability?
Love this guy always educational and easy listening.
Love your videos. Recently got into knife collecting after a very generous gift. Which fixed blade would you suggest for someone who is more into small folders? Thanks for all the content! This channel has been a gateway to this hobby 🙂
Bradford guardian 3
@@paultorgerson8776 thanks for the suggestion, I’ll check it out! It’d be my first.
I have no problem with D2 steel knives. You could even call me a D2 fan. I have a pair of Benchmades that have peeled and butchered several bears, a couple of wild beef cows and a couple or three moose. I have yet to get a speck of rust on the blades. The skinner went through one sand-encrusted bear, a moose and a two beef cows before I touched up the blade. The bears and cows were in a marine climate.
For the running bushcraft folks I’d turn to some of Matt Graham’s designs with Condor and Tops, that’s his specialty and the lil’ bugger from Tops seems especially apt for both running questions
For running or edc look at Outdoor Element’s Scout Feather knife. Small, lightweight and has integral sharpener and fire starter on sheath . $49,99
Just a suggestion I think it might be useful to have a ruler and a pocket scale on set, though I get that most information is on the site, though not everyone lists the weight of just the knife without the sheath and all the other variants (kydex, leather, nylon sheaths, etc).
Personally I really like the cold steel mini-tac for a utility knife. I have one in the tanto blade that I put an ulti clip on and pocket carry it.
Hello DCA. Excellent recomendations and beautiful knives. I always wacht your series. Hope you full recover quick
For a functional light fixed blade, the crkt spew came to mind. I like the minimilist range but the spew hovers in my "to get " list. Seems versatile for cutting or poking.
Pretty well the whole of the crkt line-up makes me want to spew so it seems unfair to limit the name to a single knife. (Actually, I just googled it and that might be the first crkt knife I genuinely fancied.)
The Ka Bar Tdi is nice I highly recommend buying a Kydex sheath that one is garbage. The Socp is awesome and it’s sheath offers so many different ways to carry it.
3:00 Tasos should consider pepper spray. Much better for self defense against dogs and other animals, not to mention it is non lethal.
Same goes for 5:58 .. that little knife won't help you to get rid of coyote fast, pepper spray will.
Was looking for the carcass splitter to come out for the tootsie pop question
How about a car camping knives setup? Maybe low-low cost, bargain, midrange and "fancy"? I don't hunt or do much more than build a fire and cook and hike on marked trails. I usually take a hatchet along for producing kindling, and I bring a box of firewood which is enough for 2 evening fires. I cook on a gas stove, mainly, though I do have grates and cast iron for cooking over a fire. I'm thinking 3 or 4 inch folder or pocketable fixed blade, a 5 or 6 inch blade for bushcraft stuff, and for some foolish desire, I think an ESSE would be interesting, not that I'd ever do anything that called for such.
Not sure on the folder, tho the Spydiechef is sure to be the recommendation, but you should ABSOLUTELY buy an ESEE. I was kind of like you, never thought I'd use it as intended, but I keep my ESEE 5 and a dead blow hammer on the back porch to split wood for the fire pit these days. Also have a 4 in S35VN and the 6, all with contoured handles. Find the one you like, buy it, and beat the living snot out of it. Its highly satisfying.
I’m not sure if anyone else mentioned it but you can actually flip that clip to invert it on the cold steel peace maker 2 & 3 it is a little tough to do but I’ve done it myself
Hey David got an actual question, normally I am just commenting for algorithm... Why aren't more companies making knives out of 14C28N Sandvik? I see Nitro V blowing up everywhere as the top budget ingot and yes it demolishes 8Cr14MoV, it just doesn't hold an edge... Ok I guess I couldn't get by without at least one pun
My guess? They're getting it cheaper.
Or even 12c27, both Kershaw and CRKT used to use sandvik all the time but no more, I think they both sold their souls to the 8cr devil.
12C27 and 14C28N are Swedish steels and 8Cr14Mov is Chinese. I can only imagine the cost of raw materials for making thousands of knives plays a huge role.
@@Ericstraordinary Not to mention shipping costs for that much steel. Guessing its a lot cheaper shipping from China for all the manufacturers in asia...china included.
nitro v is just upgraded AEB-L id think the edge retention would be comparable on edge retention?
Imo you missed one of the best one of the most versatile fixed blades out there. The bark river bush bat. Light, nuce alignment for day to day cutting and bushcraft but also has a finger loop for defensive retention
They don't carry Bark River any more. Most likely because the owner is unethical and has screwed over everyone in the knife industry he's run across including Becker and Reeve as I understand it.
They're also famous for "mislabeling" steel. As in you pay a premium price for premium steel and get a knife marked saying it is that steel, but its actually some basic tool steel that rusts...even though you paid for stainless. Plenty of documentation out there, I would never give my business to Bark River, despite some gorgeous knives they make.
DCA has mentioned "if they ever catch a knife maker mislabeling steel they'll be out the building fast" and I'm pretty sure that was a reference to Bark River, who they used to sell. Very few places sell Bark River anymore. That should tell you everything you need to know.
Enjoyed this segment last night Thanks
David, picture that Ka-Bar TDI clipped into a duty belt, left side, behind the other stuff on the belt, handle angled forward. Officer in struggle for his gun or getting piled onto, grabs the TDI with his off hand, blade projecting below is hand with edge forward. As he punches his hand forward and across, pretty mich any part of his opponent it hits will suffer. With luck, he hits a carotid artery. It’s a Get Off Me knife.
Not to be confused with a get me off knife.
That’s exactly how I carry mine. It was designed for a weapon retention type situation
Cold Steel SR1 Lite is good for self-defense but a little big (not good for small hands but would be very effective if necessary. Shit can the pocket clip they're junk and a pocket destroyer. 😂 Thank you, David, for the helpful review. 😎👍
Love this series. What are you best beach knife recommendations?
CS Mini TAC is a must have.
Self defense/ EDC my go to is my Boker GITFO or Tops Cali Cobra.
Also if someone doesn't like scratches on their blade they could always stone wash it. I mean yeah stone washing makes alot of scratches but I makes it looks alot better than like one or two scratches on a blade and you can also stone wash any kind of blade with any finish for the most part.
The sheath for fixed blades really determines how much you carry them. A sucky sheath dooms it to your knife drawer.
my personal favourite for self defence is the tops knives backbite
I enjoy these Q&A type videos. Very cool. I've got a question...
Not sure if I'm able to say this correctly, but my question is: are blade serrations really any more effective (on certain materials, as some claim) than a 'properly' sharpened plain edge? My personal experience is that serrations 'saw' through stuff long after the plain edge of a knife is dull, and that gives people (who can't/don't maintain a proper edge) the impression that the serrations cut some materials better. I maintain that an appropriately sharpened edge cuts as well or better than one with serrations. (The only exception would be something hard and plastic, like a zip tie - but with proper leverage, even that is debatable, I feel.) Care to weigh in on this? Thanks!
I have had a.life time of of knife carry. Military, chef, knife sharpener, guiding and for the last 6 years Kali. My pocket and combat knifes of choice have serrations. Will go through anything and right through anything else. Having said that for hunting bushcraft and kitchen a sharp plain edge. I have some 2 hundred plus knives, when I walk out the door it is usually with a serrated/partially serrated blade.
The first knife I load everyday is one of my SnW tantos. SBoCoSheriffs have sticky finger. Loss is mitigated by cost.
I'm surprised that I didn't see any crkt minimalist knives on the table.
Hey dca what victorinox large with a lockable blade would you use for edc? Because I live in Greece and knife laws say that you cant carry kives unless you have a professional or good excuse to carry one
Awesome video! You guys make the perfect knife videos. Thanks.
Running fixed blade, Outdoor Edge Lehawk! It’s my running jam fo sho
Hey DCA, hope you feel better soon!!
Every knife you took to defend yourself should be familiar to you. This means that a training version of such a knife is needed to safely train the defense skill with a sharp knife. It's strange that you haven't discussed this topic.
After consulting with ChatGPT the SOCP was my blade of choice. Love that knife, next best thing to a push knife which are illegal where I live.
I've carried a peace maker as a boot knife for the better part of a decade. It's a great little knife for the price
Great review DCA, no love for the horizontal belt buckle carry? My EDC is a Ka Bar Turok, just hafta offset buckle, to me much more intuitive and comfy.
Here’s a question for DCA/Seth: I’m looking towards a compression lock system to add to the collection, but I really would prefer to keep cost as low as I can. As I’m certain its a design still exclusive to Spyderco, I’m aware that they’ll still be expensive, but what would be the cheapest example I could get my hands on? Thanks for the content, always learn something new here.
Absolutely love my Mini-Tac
Want to hear you recommendation on best self defense or combat folder. Also your opinion on carrying a small push dagger for the same purpose.
I’m a LEO and I carry the small kabar TDI on my weak side. I also carry a cold steel ak47 folder in my pocket
The mini tac is awesome
Carry the SOCP everyday in the pocket... it's an amazing edc.
A couple other great ones in the way of fixed blades are the pika karambit by Fox and Bastinelli and the talon from 511 designed by Doug Markida (probably spelled his name wrong lol). Good quality karambits in general are great for self defence and there's a folder version of thr talon with the bramp (wave like feature) and of course the many great ones from Fox. To me any folding knife that you're using for self defense should have a pocket deployment feature. Yes even over an auto even if its legal to carry. A pocket deploy is just straight up faster to use than anything else in the way of folders.
And personally for a fixed karambit I'd say to go traditional and go on the smaller side (2 to 3 or 3.5) rather than one of those huge ones. Along with taking classes on how to use them correctly. Obviously a knife is gonna do damage. But knowing how to utilize it correctly is always gonna be better than just winging it.
Karambits are a terrible design.
So are pocket deployment options.
Doug Marquida is a choad.
@vorpalblades oh ya I'm sure you're a bastion of knowledge over people who actually know shit, practice, and study these things rather than sitting on their asses making playlists and talking shit.
this episode was really good 👍🏻👍🏻
I’m not sure if you could do this because I’ve never owned one and it might be painful because the plastic of the sheath might dig into your finger but you could pull the whole thing out of your waistband and use it kind of like a kubaton so that it’s not so lethal at first and then if you can’t stop your attacker like that or they try to grab it away from you then what they’ll actually be doing is pulling that sheath off for you. It’s probably not made to be used like that but that would be a great idea because once you’ve got the ring in your hand you’re not gonna lose the knife and you could begin with something that’s a little less life-threatening if your attacker is kind of lightly trying to kill you. Is there such thing as somebody lightly trying to kill you? Maybe they’re just trying to beat you up for something and if you can get them off you using some thing that doesn’t have a blade think it’s better. Because if the cops come and you’re the one with the knife you’re the one going to jail until you can prove that that person was really trying to hurt you
Them: That steel will stain and rust and discolor! OMG!
Me: Your truck never leaves pavement.
Me: Hold my beer
Lol i could literally feel the smart assery seething from DCA when talking about the rust on skinning/kitchen knives 🤣😂🤣😂🤣😂
If you're looking for a ceramic blade, consider the Vargo Sobata 398 made with a sintered titanium ceramic silver alloy blade
Who's looking
Hello DCA, can you go over the different types of micarta? I know it’s hot right now and want some clarity on linen, canvas, burlap micarta, and terotuff?
I believe he went over this a few weeks back. May be wrong on the timetable but I know he’s covered it.
@@jerrypomroy2375 He did, but I think it was more like a month or two back.
As to the question, micarta is made of fibrous material stacked with resins and compressed. So linen micarta is literally layer of linen stacked in resin and compressed, same with canvas and burlap.
I carry the large version of the TDI everyday have for about 4 years now
Hey DCA great content, always look forward to the weekly uploads. What would you recommend for a daily EDC with a 3 to 3 1/4 blade, locking, lightweight with pocket clip that would double as a cigar cutter? Prefer high end materials with a price no more that $300. Thanks.
The aluminum handled bugout in M390?
The best cigar cutter is the spyderco Amalgam
Use Zip ties to mount equipment with polymer / kydex sheaths. Don't need to pay much for attachment equipment.