How to replace hot-end fans for Vyper
ฝัง
- เผยแพร่เมื่อ 4 ก.ค. 2021
- This video shows you how to replace hot-end fans for Vyper. If you have any questions, please click on this link to get the after-sales service. 😎
support.anycubic.com/
#vyper #anycubic #3dprinter #3dprinting
What type of nuzzle i can put in it because in your site i can't buy exacly the same as the original? so if you can give me the spec of the nuzzle or a site web so could purchase one would be very nice. thank your for the video.
Do you supply Silent replacement fans as i would like to have this running in the house rather than the garage?
just use noctua 12v fans
Bonjour, Fournissez-vous des ventilateurs de remplacement silencieux ? Merci
At the end it only shows the front fan working.. how do i know if the side fans are working?
I received replacement fans with no connectors which size are they so i can buy them and solder them to the cables?
Please make a video about replacing the psu and motherboard fans.
Yes, thanks for your suggestion, we will arrange a new video. 😊
Can you post the Measurements of the Fans?
Measure the old ones?
My is an other version the middle fan is not tha same the cable is problem how to lay them
Hi, why should i replace the fans? Is iit because they screech under 100% speed?
They are ok. The fan for the switch mode power supply and control board are moderately louder. See any of the many reviews
I have the same problem but the support ist not responding
@@sim708 With the vyper the fans are only ON or OFF with the way Anycubic designed it, when it comes to printing this is fine to be honest, just have 0% for first 3 layers then 100% for the rest, if you try to tell it to do any number that isn't 0 or 100 it will just make an electric pitch sound because they're not designed to be on at different speeds. Just a design choice.
Pb here, french user, recently receive my vyper, used it 2 times to print 2 parts, and then wanted to print another and the head hit the bed that i have to turn off before breaking it !!
tried to see what happen in the head block, seen a red light named D1, a moment on, a moment off, touching some cable and light react anormaly. tried to identify what part makes the light react.
the printer don't want to autoleveling, doing the same bip when touching the bed and then try to go home but scrape on the bed, force me to turn off the printer to prevent damage the nozzle or the bed.
just sent a mail to anycubic to know what to do whith a perfect new printer that has been able to print only 2 parts and then having this pb, waiting for answers and hope that is a knew pb and then they will send a new part to replace the defective one
#anycubic if you read this, please do something, its not a single case !!
This printer ist absolute shit, the red led with autoleveling is always on now
Terrible company with no warranty. Good luck if you buy and anything breaks.
That is not true
@@Flushmaster0312 Was in my case, they tried to charge me a lot for a part that broke that shouldnt have (after about 4 months of owning it) through no fault of my own and was a known issue with the printer. In the end I went to a third party and purchased parts through them. They really let themselves down in my mind and I would have recommended them to a few friends looking to buy.
don't buy this f4king printer , 2 months with assistance message , and never resolve this problem , change all part inside the printer and have the same problem at beginning