Clutch Master Cylinder... 2000 civic CMC MOD... Throw out bearing been being pushed constantly on the pressure plate. I'm doing a clutch job today on a 08 Si :/
I have question do i need to remove the engine or i can just go under and remove the transmission im thinking ill just do mine if they dont fix it the car still under warranty but its only 18000 miles when i had the car i did not know it was broken!
I got a 2008 Nissan Frontier I bought it used has 36,000 miles on it certified but at 40,000 miles do you replace the transmission manual transmission in it and a rear end all under warranty hundred 37,000 miles in the truck bearing is making noise only in the morning I think when I push the clutch makes a grinding noise it goes away
My 2012 civic si throw out bearing fck up too im having a hard time to deal with american honda im gonna show them a video to prove that there is a grinding noise when releasing clutch from 1gear
I wonder how do you know clutch release bearing is bad. I have a condition I heard ticking sound but gone when I press the clutch. and ticking sound getting faster as I rev up.
I replaced it with the Competition Clutch in my RSX-S (same Stage1 Kit from Exedy) & the flywheel is also 9lbs. It held but because of what I'm going to do with the motor the clutch won't hold up. Stage3 is what I'm using now.
I have a 99 prelude SH and when I release the clutch into neutral and it idles I have a grinding/rattling sound. Just got the car did not make this sound when I purchased it, I wouldn't have bought it. Doing research it sounds like what your talking about a throw out bearing. I do not have friends like you so how much and how long can you drive because I'm not rich would you recommend this situation getting fixed. I drive on the highway 80% of my time from work and home. Thanks
youll be alright as long as you dont drive really hard. i just changed mine and it was making a rattleing noise when the clutch was out but disappeared when the clutch was pressed
i have an 2007 civic si. and for some reason when i go into 3rd it makes a weird noise. or it jumps back to neutral. do you know what the problem might be?? thanks
how long did it take you to take down that transmission? im looking to do the same I have an issue it feels like my car is locked out of gear on an 08 si and I cant get into 5th gear
I have an 06 si and ive replaced the clutch master twice this second time for some reason the clutch wont go all the way in. I have to pump it. motor is still turning when I push it down. could it b the throw out bearing?
I'm having a problem with my 03 civic LX I've noticed a SMALL noise when I don't have the clutch pushed in n I when I do push it in it goes away is it the throw out bearing? Do I need to replace it fast? Will it do damage to my car? Or will it just be annoying from the noise? Please help me out because money is pretty right right now I need to know if I can still drive it like that
dublehlx Sounds like a bearing issue, but it could just need adjustment. Have it checked out by someone you trust will not rip you off. If the bearing comes apart complete you will lose the ability to disengage the cluth and you will not be able to go into gear. Also you could cause damage to the transmission shaft.
It sounds like the throw out bearing from the way you described it. But to be certain always get another opinion. You may just have to have the clutch adjusted so that it doesn't ride the bearing.
exedy throw out bearing are garbage they don't last past 10k it better to get the throw out bearing from the dealership or another aftermarket brand like act or competition
I wish I knew how to make friends like that you're a good friend
YOU SOUND LIKE BOB FROM BOBS BURGERS
Clutch Master Cylinder... 2000 civic CMC MOD... Throw out bearing been being pushed constantly on the pressure plate. I'm doing a clutch job today on a 08 Si :/
resting your hand on the shifter engages the release bearing and causes it to wear faster
I have the same Exedy stage 1.
Can you do a day step by step on how to lower the transmission to do a clutch job next time please?
Iv'e already done this myself and it was well worth it I even saved some money too. No need to ask for help.
I have question do i need to remove the engine or i can just go under and remove the transmission im thinking ill just do mine if they dont fix it the car still under warranty but its only 18000 miles when i had the car i did not know it was broken!
I got a 2008 Nissan Frontier I bought it used has 36,000 miles on it certified but at 40,000 miles do you replace the transmission manual transmission in it and a rear end all under warranty hundred 37,000 miles in the truck bearing is making noise only in the morning I think when I push the clutch makes a grinding noise it goes away
I've been hearing a lot of issues with throw out bearings on Hondas built after 2006. Maybe it's a design flaw?
i drive it to work everyday but the noise comes and goes when shifting from 1st to 2nd and 3rd gears
i have a honda civic 2004 and i get the odd noise like a grinding someone told me its the release bearing.how much would a mechanic charge to fix it?
My 2012 civic si throw out bearing fck up too im having a hard time to deal with american honda im gonna show them a video to prove that there is a grinding noise when releasing clutch from 1gear
I wonder how do you know clutch release bearing is bad. I have a condition I heard ticking sound but gone when I press the clutch. and ticking sound getting faster as I rev up.
How much would you charge to replace the clutch? Is Exedy OEM a good as the honda parts? I'm trying to change the clutch on my 09 si
Paul Kash Exedy is OK stuff. If your engine is stock just stick with the Honda parts you cant go wrong that way.
My bearing reaches 123F do you think it’s going to go out soon?
as far as brand parts what would you recommend
I always recommend to go with factory original Honda parts.
I replaced it with the Competition Clutch in my RSX-S (same Stage1 Kit from Exedy) & the flywheel is also 9lbs.
It held but because of what I'm going to do with the motor the clutch won't hold up. Stage3 is what I'm using now.
I have a 99 prelude SH and when I release the clutch into neutral and it idles I have a grinding/rattling sound. Just got the car did not make this sound when I purchased it, I wouldn't have bought it. Doing research it sounds like what your talking about a throw out bearing. I do not have friends like you so how much and how long can you drive because I'm not rich would you recommend this situation getting fixed. I drive on the highway 80% of my time from work and home. Thanks
youll be alright as long as you dont drive really hard. i just changed mine and it was making a rattleing noise when the clutch was out but disappeared when the clutch was pressed
I can hear the ice cream man
i have an 2007 civic si. and for some reason when i go into 3rd it makes a weird noise. or it jumps back to neutral. do you know what the problem might be??
thanks
Infamous 3rd gear grind..nearly all K20's have this problem
how long did it take you to take down that transmission? im looking to do the same I have an issue it feels like my car is locked out of gear on an 08 si and I cant get into 5th gear
+h22sparkle ABout 3 hrs
If you're locked out of a gear then you're synchro is probably shot. seeing is how it won't go into 5th it's probably the synchro on 4th gear.
I have an 06 si and ive replaced the clutch master twice this second time for some reason the clutch wont go all the way in. I have to pump it. motor is still turning when I push it down. could it b the throw out bearing?
peter gutierrez Might have air in the system.
Whats that growing back there lol?
Is a release bearing and throwout out bearing the same ?
Stephen Suarez Yes.
did the car have a weird idle issue? my car whenever i push in the clutch the rpms will drop people are saying it's my TOB too please help!
+Touhmong Lor Yes it was trying hard to start and had idle issues.
Hey just wondering was the noise he first heard like a chirping or squeaking noise?
I think that these bearings fail when someone rests their foot on the clutch pedal over time.
Eastcoast FL I would agree with that.
+Eastcoast FL I also agree
Where are you located,
I'm having a problem with my 03 civic LX I've noticed a SMALL noise when I don't have the clutch pushed in n I when I do push it in it goes away is it the throw out bearing? Do I need to replace it fast? Will it do damage to my car? Or will it just be annoying from the noise? Please help me out because money is pretty right right now I need to know if I can still drive it like that
dublehlx Sounds like a bearing issue, but it could just need adjustment. Have it checked out by someone you trust will not rip you off. If the bearing comes apart complete you will lose the ability to disengage the cluth and you will not be able to go into gear. Also you could cause damage to the transmission shaft.
@mmuh1980 okay thanks for the info bro good to know that it can cause damage and slip out of place now I know to replace asap
Input shaft
It sounds like the throw out bearing from the way you described it. But to be certain always get another opinion. You may just have to have the clutch adjusted so that it doesn't ride the bearing.
200k miles on my civic 1.7 with original clutch....its all how you drive
exedy throw out bearings were always not good
that plastic part melted
exedy throw out bearing are garbage they don't last past 10k it better to get the throw out bearing from the dealership or another aftermarket brand like act or competition
this is massive abuse of it.. like :clutch kick million cutt off to powershift each gear, every day all day....