i'm pretty sure that's one of our exhausts.... lol Thanks for your custom, we have added this clip to our favourites so that all our future customers can listen Many thanks from us all at A16 Road n Race Supplies
@Nathanie1Carter No, the two clamps I use are car exhaust clamps, one holding the can to the link pipe, and another holding the link pipe onto the headers. This makes for a very solid fixing, so solid infact I now have a full size carbon can fixed with the same clamps. I found with the standard hanger/footpeg the exhaust angle didn't look as good.
@bailey2045 no i dont have it any longer, but they are available on ebay. just search for exhausts for your particular bike. thanks for the comment though!
@JonRey4 I think the likeliness of someone wanting to clone the plates off a Peugeot 106 is a lot lower than those on a Yamaha R6, and it wasn't much bother really so please, worry not :-) Yeah the tax disc holder has been there since I brought the bike from the main dealer and no mechanic, MoT tester or any of the several police officers I have met along my travels, have ever had an issue with its location, so I never bothered to move it, however, again, I appreciate your concern. Thanks.
@jake3393 Hey, I got the same Dan Moto Carbon GP and didnt do any jetting and the bike runs fine. I have a vid of the exhaust, but it was running pretty cold so it hesitates a bit, but once its on the street and warmed up it sounds great. Im not sure if performance has increased at all, im guessing if it has, its probably miniscule, but i like the look and sound.
nice exhaust.. Any mods? Is that full or slip on exhaust? I got my R6 and It came with an M4 slip on.. Sounds nice but I might change out the exhaust when I can afford to do some mods .
@GeneralRAAM6666 they r good bikes. i have one myself i just flat blacked it. looking to get a new exhaust. from what i'm hearing though, they do run into second gear issues. I haven't had that problem yet. mine is at about 15k mi.
Im trying to decide if I want to do a slip on exhaust or not for my 2000 R6 cause I've heard you have to do a jet kit to compensate for greater amount of air being sucked into the engine due to a lower backpressure in the exhaust. Did you do a jet kit, and if not, did you notice any problems with the idle or while running? Thanks
I would I did this to a bike once and shattered the pistons not enough back pressure to the engine and I burned all my oil it blew the whole engine my pistons were coming out in pieces
this exhaust is manufacture by us - A16 Road n Race supplies. We are on Ebay or you can go straight to our website at a16roadnracesupplies.co.uk Looking forward to helping you make some noise.... See our You Tube Channel - A16makesomenoise
We used to manufacture the exhausts for Tube Tech.... Now they are branded under our own name A16 take alook at the Moto GP range at a16roadnracesupplies.co.uk for your bike
Why the hell do people block there plates????? like maybe if u was doing some crazy ass shit and didn't want to get in trouble but for this??? come on lol
its not just that bike its even people selling things or taking pics anything ur not gonna get in trouble if someone steals Ur plate number and dose a crime or what ever it is someone would want ur plate number for u may get question but that be the worst of it but idk i live in Maine who knows how it it's in other states but we don't have that problem up here even tho we still have people covering there plates in pics lol
Love the way you've mostly kept it stock looking. Very rare in that condition. Beautiful bike.
i'm pretty sure that's one of our exhausts.... lol
Thanks for your custom, we have added this clip to our favourites so that all our future customers can listen
Many thanks from us all at A16 Road n Race Supplies
One of the if not the best bike ever made
Dam dude that sounds so mean, love it!
that is one beautiful bike
@Nathanie1Carter No, the two clamps I use are car exhaust clamps, one holding the can to the link pipe, and another holding the link pipe onto the headers. This makes for a very solid fixing, so solid infact I now have a full size carbon can fixed with the same clamps. I found with the standard hanger/footpeg the exhaust angle didn't look as good.
Blocks out plate on bike but not the car sitting in the garage lol
Haha, fuck the car
I just ordered mine for the 03 R1. I'll post soon as it gets here
Where you buy that exhaust I love the sound
Some flush indicators yea or you can upgrade the flairing to an 08 it all about the appearance
@bailey2045
no i dont have it any longer, but they are available on ebay. just search for exhausts for your particular bike. thanks for the comment though!
Clean
@JonRey4 I think the likeliness of someone wanting to clone the plates off a Peugeot 106 is a lot lower than those on a Yamaha R6, and it wasn't much bother really so please, worry not :-) Yeah the tax disc holder has been there since I brought the bike from the main dealer and no mechanic, MoT tester or any of the several police officers I have met along my travels, have ever had an issue with its location, so I never bothered to move it, however, again, I appreciate your concern. Thanks.
very nice ride :)))))
@jake3393 Hey, I got the same Dan Moto Carbon GP and didnt do any jetting and the bike runs fine. I have a vid of the exhaust, but it was running pretty cold so it hesitates a bit, but once its on the street and warmed up it sounds great. Im not sure if performance has increased at all, im guessing if it has, its probably miniscule, but i like the look and sound.
@millzy24 Hey Millzy just wondering hows that bike? like any mechanical problems with it? I was thinking of selling my F4I and getting one those.
nice exhaust.. Any mods? Is that full or slip on exhaust? I got my R6 and It came with an M4 slip on.. Sounds nice but I might change out the exhaust when I can afford to do some mods .
@ebab999 cool i hope you enjoy it! mine is now sold :( il soon get another motorbike though!
@GeneralRAAM6666 they r good bikes. i have one myself i just flat blacked it. looking to get a new exhaust. from what i'm hearing though, they do run into second gear issues. I haven't had that problem yet. mine is at about 15k mi.
hey nice bike im getting one soon ( i hope ) but the mirrors can you flick them in??? because i dont have a lot of space in my backyard :P
Can't believe how may views this has had, but it was bought over 10 years ago!
Im trying to decide if I want to do a slip on exhaust or not for my 2000 R6 cause I've heard you have to do a jet kit to compensate for greater amount of air being sucked into the engine due to a lower backpressure in the exhaust. Did you do a jet kit, and if not, did you notice any problems with the idle or while running?
Thanks
I would I did this to a bike once and shattered the pistons not enough back pressure to the engine and I burned all my oil it blew the whole engine my pistons were coming out in pieces
sweet bike man, i wish i had it :((
Do you own a bike now,
?
Yo what exhaust did you have
some flush front indicators and your R6 would look perfect!
Got a link to this exhaust?
Where can i find this?
is there somewhere that sells that pipe?
Muito linda essa moto
@WegPutz3r thanks :-)
same i want one too..
let us know when you upload some video's TopNonCom0
@ebab999 howmuch did you pay???
@ebab999 How much?
@Kholmesii
Not really. It would break my heart to sell it. Make me an offer by all means, but it'll have to be a good one for me to let it go.
Hi have a look what i did with my plate and let me know what ya think.....
i just bought a 2000 yamaha r6 :)
i just bought 2010 yamaha r6 :)
search ebay for 'carbon stubby slash cut can' for whatever bike you need it to for.
if it was a racefit growler i'd probably still have it! lol
ราคาเท่าไหร่
Those plastic pieces right under the handle bars aRe called what
Forrest Williams fairings?
this exhaust is manufacture by us - A16 Road n Race supplies. We are on Ebay or you can go straight to our website at a16roadnracesupplies.co.uk
Looking forward to helping you make some noise....
See our You Tube Channel - A16makesomenoise
wanna sell it?
exhaust looks like a racefit growler without a badge lol
I want to enter text.
So, what does burnt flesh smell like? :P
Xénos Polemistí̱s I like how no one else noticed he doesn't have any rear sets haha
no mate its standard.
We used to manufacture the exhausts for Tube Tech.... Now they are branded under our own name A16
take alook at the Moto GP range at a16roadnracesupplies.co.uk for your bike
Why the hell do people block there plates????? like maybe if u was doing some crazy ass shit and didn't want to get in trouble but for this??? come on lol
MrRotery7 because its a popular bike and cloning plates is too easy. come on.
its not just that bike its even people selling things or taking pics anything ur not gonna get in trouble if someone steals Ur plate number and dose a crime or what ever it is someone would want ur plate number for u may get question but that be the worst of it but idk i live in Maine who knows how it it's in other states but we don't have that problem up here even tho we still have people covering there plates in pics lol
He covers his bike license but not the ones on his car!! Lol js
Mmmmmmmmmmmmmmmmmmm