Was that your newest apprentice that popped in there to check out the Harsey special edition lol? BTW I gotta say the George Harsey Raider is awsome and you absolutely KILLED IT with The Flourishes Special Edition with the Memento Mori a close second, but NOTHING COMES CLOSE to The Plague Doctor!! Love my SHF!! Keep it up with the killer work!
Im gettin the new one, life is for living. I hv the time waits one now! Beastly!! These knife freaks in America keepin knife center in bus makin bank. Bl hq to. Our corp profit margins are off charts!! Too bad we cant get together 1 f ing time and force them bk to USA. F their profits. S35 or better, ti, mic, g~10 dont matter, $100. My crk sebenzy is in s45. Buck110 is too. Awesome.
It's the new hotness. And it's really good stainless steel. Incredible edge retention and good toughness while remaining stainless to a decent degree. Good luck sharpening in the field though.
It's cpm-m4 edge retention. Cpm-cruwear toughness. Lc200N levels of stainless while not being a stainless steel. Ease of sharpening I do not know. I guess that depends on the heat treat. The problem with Magnacut has been just that. There is little room for error with its heat treat. At least that's what I've gathered from looking into it. There is a great video of knife steel needs, the man that created cpm-Magnacut, in which he explains everything about the steel. Me, I love my 154cm, cpm-154, s30v trio, m4, and cruwear. S35vn and s45vn have been amazing steels in regards to everything I've put them through. I have a Greg Gersh 940 Magnacut blade. I've tested it out and it's been good. I haven't noticed a real difference yet. Also to me, how stainless a steel is does not dictate if I buy it or not. I don't care if it is or isn't. My most used knives have been the mini adamas in cruwear, a 940 in M4, a XT1 Alpha in s35vn, and a Zaan in s45vn. And I've loved every minute of them. S45vn has really surprised me. The edge retention seems off the charts and it's been nothing but tough. It was destined to be the next great steel, in which it is and is being used by many manufacturers. It's just been overshadowed by magnacut and the knife crowd is just clamoring for it to be used on everything. So the manufacturers have been taking note and they've been slowly implementing it when they can.
![ผัวเถื่อน - ยูริ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/P08ORRVDGl8/mqdefault.jpg)
That high end fighting knife is amazing. Those '23 SE are also in the "wow" class.
I have so many freaking knives to buy ... 🙃
I will absolutely “beat the crap” outa that a Gold Kbar. Can’t wait to get one! #useyourshit
MARSOC PineBar fighter in Magnacut? YES PLEASE.
Been waiting for that PineBar Fighter for like a year to replace my Damysus, let's do this!
Was that your newest apprentice that popped in there to check out the Harsey special edition lol? BTW I gotta say the George Harsey Raider is awsome and you absolutely KILLED IT with The Flourishes Special Edition with the Memento Mori a close second, but NOTHING COMES CLOSE to The Plague Doctor!! Love my SHF!! Keep it up with the killer work!
Everyone of these blades is over priced .period
No ceramic berring and no steel liner inserts
Is a joke
I like the name Sparbar or Kartan
The '23 batch of Harsey folders are beautiful.
Im gettin the new one, life is for living. I hv the time waits one now! Beastly!! These knife freaks in America keepin knife center in bus makin bank. Bl hq to. Our corp profit margins are off charts!! Too bad we cant get together 1 f ing time and force them bk to USA. F their profits. S35 or better, ti, mic, g~10 dont matter, $100. My crk sebenzy is in s45. Buck110 is too. Awesome.
I wonder if the Kabar will cost 400 dollars plus, I wish they can keep it around 350 or so even if it is s45vn.
Most compnies using Magnacut now. To sell knives. I have s35,elmax, etc. plz explain the Obsession with this steel. Ty in advance. Big E
It's the new hotness. And it's really good stainless steel. Incredible edge retention and good toughness while remaining stainless to a decent degree.
Good luck sharpening in the field though.
It's cpm-m4 edge retention. Cpm-cruwear toughness. Lc200N levels of stainless while not being a stainless steel. Ease of sharpening I do not know. I guess that depends on the heat treat. The problem with Magnacut has been just that. There is little room for error with its heat treat. At least that's what I've gathered from looking into it. There is a great video of knife steel needs, the man that created cpm-Magnacut, in which he explains everything about the steel. Me, I love my 154cm, cpm-154, s30v trio, m4, and cruwear. S35vn and s45vn have been amazing steels in regards to everything I've put them through. I have a Greg Gersh 940 Magnacut blade. I've tested it out and it's been good. I haven't noticed a real difference yet. Also to me, how stainless a steel is does not dictate if I buy it or not. I don't care if it is or isn't. My most used knives have been the mini adamas in cruwear, a 940 in M4, a XT1 Alpha in s35vn, and a Zaan in s45vn. And I've loved every minute of them. S45vn has really surprised me. The edge retention seems off the charts and it's been nothing but tough. It was destined to be the next great steel, in which it is and is being used by many manufacturers. It's just been overshadowed by magnacut and the knife crowd is just clamoring for it to be used on everything. So the manufacturers have been taking note and they've been slowly implementing it when they can.
What is the price on those Silver Line knives?
Not going to see these folders until December
Of 2023 really nonsense
They are available now on our website!
no closeups of the blades so folks can actually see them?? kind of a big omission..
Thanks for the input, Mikey!
was there a price point for that magnacut ka-bar?
I see me getting one of those Maganacut K-Bar knives for my nephew who just completed Recon training.