ASUS TUF Gaming GT502 Build
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- A time-lapse of my ASUS TUF Gaming GT502 PC Build Guide. The full Step-by-Step Build Guide is available at • ASUS TUF Gaming GT502 ... the case review at • ASUS TUF Gaming GT502 ... and more photos of the build can be seen at pcpartpicker.c... Links to parts used in the build are listed below.
Parts used in the build (Amazon links are Affiliates Links)
• ASUS TUF Gaming GT502
UK - amzn.to/3WGUe7B
US - amzn.to/3Z4iORm
CA - coming soon
• ASUS ROG STRIX Z790 E GAMING WIFI
UK - amzn.to/3Us77k5
US - amzn.to/3GFescx
CA - amzn.to/3uloJmW
• Intel Core i7-13700K
UK - amzn.to/3F5yT1k
US - amzn.to/3ihnPFl
CA - amzn.to/3VfYbzk
• ASUS ROG RYUO III 360 ARGB CPU Cooler
UK - www.overclocke...
US - www.newegg.com...
CA - www.newegg.ca/...
• Kingston Fury Beast RGB 32GB 5600MT/s DDR5 CL40 DIMM Desktop Memory (Kit of 2)
UK - amzn.to/3R4dk5g
US - amzn.to/3RapvO6
CA - amzn.to/3bOCyVb
• Sabrent 2TB Rocket 4 Plus 2 TB
UK - amzn.to/3pf3UVm
US - amzn.to/3qh5gAe
CA - amzn.to/3rRBd2l
• Cooler Master V850 Gold i Multi Power Supply
UK - coming soon
US - coming soon
CA - coming soon
• ASUS ROG STRIX RTX 3080 (ROG-STRIX-RTX3080-O10G-GAMING)
UK - amzn.to/2KW8lpW
US - amzn.to/3iXvvst
CA - amzn.to/3Q4HmnX
• Lian Li UNI Fan SL120 V2 3 Pack White
UK - amzn.to/3IaY18V
US - amzn.to/3i4kZDX
CA - COMING SOON
• Lian Li UNI Fan SL120 V2 Single Fan White
UK - amzn.to/3VR0bhf
US - amzn.to/3GxFDWE
CA - COMING SOON
• ASUS ROG STRIX XF120 Single Fan
UK - amzn.to/3Ij3LNM
US - amzn.to/3GxFNNK
CA - amzn.to/3Gterbs
• LIAN LI PW-PCI-420 Premium PCI-E 16X 4.0 Black Extender Riser Cable
UK - amzn.to/3Q9BDPg
US - amzn.to/3CaZ98M
CA - amzn.to/3VCNI0v
• CableMod PRO ModMesh Cable Extension Kit
UK - eustore.cablem...
US - store.cablemod...
CA - store.cablemod...
• CableMod PRO ModMesh Bridged 8+8+8 Pin PCI-E Extension Cable
UK - store.cablemod...
US - store.cablemod...
CA - store.cablemod...
Affiliate links
I am part of the Amazon associates program, this means I get a small commission when you buy through these referral links.
Music
Should I Let Go? - OOMIEE
www.epidemicso...
#pcbuild #asuspcdiy #gamingpc #buildcomputers #tutorial #beginnersguide #buildingpc #electronics #personalcomputer #budgetgamingpc #budgetpc #asusrog #asus
Why.... those extra 3 fans behind the motherboard in the second chamber or whstever its called are absolutely useless
Its so you can put a radiator there not just fans.
How is the 4070 ti connected to the Motherboard ? there is no riser cable and you didnt show any PCI.e vertical mount at the bottom.
How's the gpu holding up without a holder?
are you using any vertical stand for the GPU?
This is late but I believe the case comes with a vertical and horizontal gpu stand
Meh i wanted to see the vertical gpu mount but you skipped it
why do speed build? its so fast i cant no longer bhe interested after 10 seconds
Ironic using LIan Li fans in an 011 Dynamic clone by Asus.
Haadn't thought of it that way
I have some issues with the build, first off don't use Kingston RAM (it's garbage), the white does not look good with the black, also, I would of taken advantage of the dual chamber and put the AIO in the back above the power supply, and yes you didn't show the riser cable, other than those main issues, it looks good.
one more thing, you should've put the NVMe in the top slot near the CPU so you can take advantage of DirectStorage and/or RTX IO
Do you think the three fans on the back of the motherboard make any noticeable difference to temps?
does deodorant work under 1 arm?.. lol
@@typerightseesightLel 😂
I take it that the 3 fans in the bottom are intake, 3 fans on side are intake, 3 fans on the other side of the case are exhaust, 1 fan on the back is an exhaust and the 3 fans for the radiator are exhaust.
In short, there are 6 fans for intake, 7 fans for exhaust.
☆What is the ambient temp inside of the case?
☆ Decibel level while all 13 fans are spinning. Oh
I forgot the PSU fan, 14 fans total
☆ Nice setup!!!
As long as the case has Positive Airflow should be good - best way to check -/+ flow, piece of 8x11 sheet paper, if the paper is sucked into the intake and stays without holding it - Positive Airflow, if the paper is pulled and not pushed by Outlets, you have negative Airflow. Will need to change your fan arrangement. Then when the case is closed you will have correct airflow and proper temp distribution.
@@KeyBoardCowboy2009 So what fan arrangement do you recommend if you have thirteen?
@emilianofragosor9836 I'm assuming side intake, bottom intake, top exhaust, rear exhaust and if you have the front panel glass removed intake as well, I have glass front and left side but still stay everything under full load 55 c degrees
Вопрос один - зачем столько вентиляторов? Пользы от них никакой нет в таком количестве.
One question - why so many fans? There is no benefit from them in such quantity.
Someone needs to test them all out to tell you if you need them all
Idk how I feel about this build…
Im 3 months late to the HAF 700 evo case video, but why is my ARGB hub not in my Master+ software? LCD screen works fine, but no RGB from fans or front panels
See if they gave this case about an inch more in space in front of the GPU, I'd buy one.
Shame you didn't show the fan controller.
😍😍 nice case
Yes, it looks great
What vertical gpu mount did you use?
Link for the exact vertical gpu mount kit! Thank youu
does not look wide enough to mount a 4000 series gpu the normal way so eh ill pass
iva a decir menuda mierd de torre pero cuando la vi por detras dije menuda torre lo tiene todo jajajjajajajajajaja
hi, for the riser, do i need 200mm or 300mm ? thank you
Am I blind or did they not install a GOU riser cable from the card to the motherboard, and just left the PCIE cover that the GPU ships with on it?
The GT502 has no proper mount for horizontal install.. so.. the card just.. hovers..
How did you get the vertical mount the ones i see online dont have a vertical mount
hi thanks for the amazing video and congrats for the nice buil
now i have a question for you i want the same box and im planning on buying the msi suprim luquid x 4090 you think i have enough space to put the radiator of the card in the side next to motherboard? or where else you will recomment ill have space to put it? thanks in advance
i want a pc like that ... can you build a pc for mi ???
Anímate a hacerlo tú mismo, es relativamente fácil y la mitad de lo bonito de la PC Masterrace es armar tu propia PC.
Christopher can you explain how to make Asus TUF logo lights up on the front side of the case.thx
You now it it dont work whit me
Copy of lian li o11 dynamic 😂
Lian li o11 style again?
Yes, looks very similar
airflow go brrrrrrrrrr
16 fans!!
I would have preferred to have done everything in black, it somehow looks like I wanted it but couldn't :D, but great video
I have to work with what I have, but was delighted how it turned out
@@ChristopherFlannigan i know Christopher, its a great video, greetings from Germany :D
Can you give some closeup pictures of the glass front panel [mounting mechanism], Want to see if It is possible to replace it with a Metal/mesh panel
too many fans make the system hot
Damn, 13 fans
Nice counting
@@ChristopherFlannigan Did you have to buy the pcie extension separately or was it included?
Also is there something inside the box to steady the GPU? Or do I also have to buy it separately. Like a metal piece that holds it?
I saw in the video that you get a frame for the sideway GPU usage with the package.