Fitting pitbike piston rings and the barrel to the 155cc chinese dirt bike rebuild
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- This the next episode in the ZS155 pit bike rebuild
I assemble the piston and rings, assemble the piston onto the con-rod and fit the barrel over the top
Also check out my new instagram channel #motorcycle fixer for day to day stuff i'm looking at. It may just take me a while to get use to it 8o)
![[TH] 2024 PMSL SEA Finals D2 | Fall | ต้องรักษาฟอร์ม อย่ายอมให้ใครแซง](http://i.ytimg.com/vi/x38QsGn7A3M/mqdefault.jpg)
What can I say about this fantastic gentleman? The tickers ring goes on the top ring space and the second thickness one goes on the second ring and the oil rings are so thing they goes either side of the main bit that goes in the middle. Really nice detail. 5 thumbs up from me and plz subscribe to this really kind and knows his stuff is that's got to be worth a sub. Take care motorcycle fan and big shoot out to the motorcycle fixer. Take care m8
Thank you Dean 👍🏼
@Motorcycle fixer your welcome did you get the email I sent you about the gsxr I have, best regards
Yeh top guy explaining it really well.
You are awesome. I hope you keep making videos on the zs 155 cc engine
Hi John
Thank you very much for the nice comment
I plan on continuing with the 155 engine in the coming months so stay tuned 😁👍🏼
So that's what a Gudgeon Pin is.
Everyday's a school day 👍🏼😂
very helpful video mate!
Thank you 👍🏼
What can happen if the piston is in upside down so the intake is on the bottom
On a four stroke the cutouts for the valves are usually different sizes so the piston could hit the valves
Thank You!🎯🤗
No problem 👍🏼
I have a dowel what has a curve on the edge if that makes sense and it looks different to the rest of the dowels and i cant seem to get around it im currently doing a top end rebuild
Hi
Sorry i don't quite understand what you mean. What is the problem with the dowel?
@@motorcyclefixer its ok and turns out it was called an oil feed dowel but i sorted the problem out
Hello, would you know why my 125cc pitbike won’t click into 3rd and 4th it’s was fine last time I rode it but it’s been sat for a year since I haven’t had time to do anything with it, it’s only had about 6 hours riding time.
Thanks
Hi
Is the engine turning when you're changing gear
The gearbox has to be turned sometimes for the gears to mesh
Nice video mate 👍🏻 what size piston is it on a demon x 120 pit bike?
Hi
Sorry I don't know off the top off my head and I don't have any around to measure
@@motorcyclefixer would it be 52.4mm??
@@connorjack3246
🤷🏻♂️ I've have to get one to measure it
Sorry
Why does this engine not have a small end bearing.
Hi
Thanks for your question
It's a four stroke engine and Four strokes don't have small end bearings as a rule
@@motorcyclefixer reason I asked is because I've just stripped my son's stomp engine, the gudgeon pin is well scored grooved, it was very hard getting the pin out.
So thought it wouldn't get like that if it had a bearing.
@@bulpinbros yes I've seen it a few times on pitbikes.
Need to make sure the oil is topped up and changed regularly
Sometimes it can happen even then if the engine overheats
@@motorcyclefixer I've just ordered front brake for my son's stomp 140 , the front brake on it is a single pot, but the ones I got in the post today are twin pot. Is there a correct one.
@@bulpinbros I'm not sure what the standard fitment is on there I'm sorry.
Look at pictures on Google of the same bike and see what's on them.
If the original is single pot then I would replace like for like