I need to do this on mine I had completly rebuilt it also split the case changed the shift forks then my friend had put the timing chain in wrong and it was 180 degrees out and helped me adjust the valves at that time but he didnt have a good enough took for .06 and .04 the bike kinda over heats and antifreeze comes out the over flow
Hi I have a arctic cat atv 450cc when I take the rocker cover off it turns over great but when I put it back on its as though there's two much compression or the battery hasn't enough power could any advise me on what it could be please
I was just wondering I did a compression test on my king quad I only got 60 lb on the compression test is it possible the machine can still run with such low pressure it still runs
@@TestDontguess is it possible to put a 700 h1 head and jug on a 550 h1? I've heard that they all use the same timing chain and setup and that it would turn it into a 670, I just don't know if it would work though
So your advice on finding top dead center is to hope that you're not one rotation out? 😂 How many engines have you ruined? You clearly should not be giving advice on this subject.
Should I be able to see the valve through the intake? (Where the carburetor connects into the engine)
It make sense. Great video
Can I do this adjustment with engine still mounted on wheeler
Tried to find TDC mark on 98 quadrunner 500 ltf 4x4 no mark
I have a artic cat 250 2001 idles but does not accelerate does not appear to be fuel related valve timing is correct any help
I need to do this on mine I had completly rebuilt it also split the case changed the shift forks then my friend had put the timing chain in wrong and it was 180 degrees out and helped me adjust the valves at that time but he didnt have a good enough took for .06 and .04 the bike kinda over heats and antifreeze comes out the over flow
Thank you!
Would you happen to no what valve clearance would be on a 1998 Suzuki quadrunner 500.
MFBT!!!!! WOOOOOOOOOO!!!!!!!!!!!!!!!!!!!!
How do you rotate the crankshaft to get TDC? I saw you moving something with the crow bar, but I couldn’t see what you were doing on that side...
Crank
Hi I have a arctic cat atv 450cc when I take the rocker cover off it turns over great but when I put it back on its as though there's two much compression or the battery hasn't enough power could any advise me on what it could be please
Charge or replace battery?
I have suzuki ltz 300cc and what is valve adjustment? This motor? 0.0? What
is it the same for 700
You may want to reference a service manual for proper clearances
BSK Garage where could I get one
45 for fuel pump pressure?
I was just wondering I did a compression test on my king quad I only got 60 lb on the compression test is it possible the machine can still run with such low pressure it still runs
You could have a decompression lever to make easier starting, which in case only a leak Down test would really tell the health of the motor
@@TestDontguess is it possible to put a 700 h1 head and jug on a 550 h1? I've heard that they all use the same timing chain and setup and that it would turn it into a 670, I just don't know if it would work though
So your advice on finding top dead center is to hope that you're not one rotation out? 😂 How many engines have you ruined? You clearly should not be giving advice on this subject.