Thanks for the video. I can only say for myself but I think all of your supporters know and understand your time constraints on making videos. Take care of what you need to do. We will all still be here waiting patiently. I always enjoy your video's. It's worth the wait, Take care
We know you have a life & family! Don't stress over getting your videos out to your Subscribers. We don't pay for your content, so there is no expectations for their frequency! Sure we all what to see your creativity daily, especially knife reveals. The holidays I'm sure increases knife orders.
You always have the best videos and they're always worth the wait. Take care of yourself and your beautiful family first. We'll still be here when you have the time. You're such an inspiration and you have a very interesting (simple little) life. Thank you for sharing it with us.
For the bandsaw stand, I built a wooden frame for mine. It was really fast. Eventually, I’ll make a metal one, but the wooden one is surprisingly ‘Skookum’.
Thank you for.the content you provide. You inspired me to start making knives. I am ordering my.2x72 tomorrow. I have also gotten a paragon kiln. I'm super excited to not have to hand file bevels anymore. You must have cut a pile of blanks on that Milwaukee.
Houses in cold climates have an 'arctic room'. A small room on the front/back of the house where you can put your boots on and off... Which keeps the cold out of the house. Make such a room out of that staircase, to keep the dust out of the house. Could be as simple as a 2x2 frame wrapped in plastic, with a storm door on it...
You’re welcome! I don’ think it would make too much of a difference if they were lubricated or not. They are a sealed bearing so not intended to be lubricated. I think they will just fail due to the nature of the work they do and the size that they are.
Get some help! Lots of youtubers emloying asistent worker! With your amount of knife orders one asistent worker helps a lot,and dont cost a fortune! Think about that! :)
Rodoljb cicko yeah, but he'd have to find someone who is at the same level of anal retention when it comes to his quality demands. Of course, they could run for coffee refills, actually do the packaging/shipping, carry stuff over from the old shop... anything that eats away at the production time.
Very helpful video, exactly the same band saw as mine! Interested to know what TPI blade your using? I've been using a 14tpi blade and it struggles a little cutting 4mm 01 tool steel but yours seems to cut through with ease!
an empty sea-can that's -20ºC a lot of the winter...the whole reason why I'm moving into the garage in the first place...👍 (grinders don't start well or run well let alone my fingers when it's that cold😆)
Hmm, I'm sensing a theme today. The TradsmanChannel2017 put out a maintenance video on his bandsaw mill today. Hey, didbyoubever do anything with that Damascus Steele blank from Alec yet? If you did, I can't find the video. Also, if you are going to order "spare" bearings any way, why not just go ahead and replace all the bearings on that lower guide system while it was out? Thanks, and see you next time.
I am a fan of going ahead and replacing parts if you have new ones, while you already have the tool apart. I would have put the new back bearing on. Also, instead of leaving the old bearings on one post... Since the front ones obviously take the most abuse... I would have put the old bearings on the back of each post, and the new bearings on the front of each post.
Thanks for the video. I can only say for myself but I think all of your supporters know and understand your time constraints on making videos. Take care of what you need to do. We will all still be here waiting patiently. I always enjoy your video's. It's worth the wait, Take care
Don't worry about the lack of videos. Getting into your new house is important.
We know you have a life & family! Don't stress over getting your videos out to your Subscribers. We don't pay for your content, so there is no expectations for their frequency! Sure we all what to see your creativity daily, especially knife reveals. The holidays I'm sure increases knife orders.
You always have the best videos and they're always worth the wait. Take care of yourself and your beautiful family first. We'll still be here when you have the time. You're such an inspiration and you have a very interesting (simple little) life. Thank you for sharing it with us.
Bought a Swag table for my Milwaukee Portaband. Works great! Highly recommend getting one, you’ll love it.
I enjoy every video of you. 1st you are a very simpatically guy 2nd my English understanding is getting better and better :) regards from Germany :)
Just keep your pace, you're doing great. And we do enjoy those vlogs aswell!
Being busy is good. Thanks
congratulations for the new workshop,.............felicitaciones por el nuevo taller ,
Your doing great mate, simple rule is look after yourself first then worry about everything else
For the bandsaw stand, I built a wooden frame for mine. It was really fast. Eventually, I’ll make a metal one, but the wooden one is surprisingly ‘Skookum’.
I am really enjoying the vlog videos just as much as the other content. Keep up the great work!
thank you very much! I really appreciate it!👍
I love my milwaukee portable band saw! I use it all the time for the rings I make! This video made me double check my bearrings haha!
Thank you for.the content you provide. You inspired me to start making knives. I am ordering my.2x72 tomorrow. I have also gotten a paragon kiln. I'm super excited to not have to hand file bevels anymore. You must have cut a pile of blanks on that Milwaukee.
Nice to hear form you...😉
Cool video. Be cool we al know you are about to move in to your new house.....👍
This is like a tool time Tuesday, but on a Sunday.
hahahaha!
Get the SWAG table..... I love mine and the foot pedal......
Keep it up. You live your life full dude, happy to join you on the journey when you can share.. Anthony Kent
Thank you!
I had the same thing happen to mine as well. Easy fix
Nice video can you tell me we're to find blad guides for anbull portable band saw thanks for your time
Yay ... a nother vid ...
Houses in cold climates have an 'arctic room'. A small room on the front/back of the house where you can put your boots on and off... Which keeps the cold out of the house. Make such a room out of that staircase, to keep the dust out of the house. Could be as simple as a 2x2 frame wrapped in plastic, with a storm door on it...
Miss ya buddy
Looking great.... are you ever gunna make the knife from the steel you got from alex?????
as soon as things are so hecktick👍
Simple Little Life understand... 👍👍👍👍
THANKS for the video! Should the bearing be lubricated, or should we avoid doing that?
You’re welcome! I don’ think it would make too much of a difference if they were lubricated or not. They are a sealed bearing so not intended to be lubricated. I think they will just fail due to the nature of the work they do and the size that they are.
@@Simplelittlelife Thanks!
you can use a French cleat to put the bandsaw on the wall.. or even a double French cleat... may work for you...
Yo bro! Love the videos keep hammering my friend👍🏼
Thank you very much! I really appreciate it. Cheers!👍
Get some help! Lots of youtubers emloying asistent worker! With your amount of knife orders one asistent worker helps a lot,and dont cost a fortune! Think about that! :)
Rodoljb cicko yeah, but he'd have to find someone who is at the same level of anal retention when it comes to his quality demands. Of course, they could run for coffee refills, actually do the packaging/shipping, carry stuff over from the old shop... anything that eats away at the production time.
Transmission supplies on 42ave and Blackfoot would probably have the bearings you’re looking for.
sweet! Thanks👍
How do i know what size blade i need ?
Get the swag off road bandsaw table things sweet
Much agreed. Have had mine for a year or two and not sure what id do without it. Having mitre slots are a nice useful touch aswell.
Just had a amazing idea if and when you come see Alec Steele bring me a knife so can buy 1 of ur knives
Very helpful video, exactly the same band saw as mine!
Interested to know what TPI blade your using? I've been using a 14tpi blade and it struggles a little cutting 4mm 01 tool steel but yours seems to cut through with ease!
+Andy Brocklehurst thanks! Actually I also just run a 14 TPI on mine. I find it to be the best all around blade for what I cut. Cheers👍
great video, Was there a number on them bearing?
Grinding room? You got an empty sea-can... :D
an empty sea-can that's -20ºC a lot of the winter...the whole reason why I'm moving into the garage in the first place...👍 (grinders don't start well or run well let alone my fingers when it's that cold😆)
If you had to choose from one power tool to make a knife what would it be?
Hmm, I'm sensing a theme today. The TradsmanChannel2017 put out a maintenance video on his bandsaw mill today.
Hey, didbyoubever do anything with that Damascus Steele blank from Alec yet? If you did, I can't find the video. Also, if you are going to order "spare" bearings any way, why not just go ahead and replace all the bearings on that lower guide system while it was out?
Thanks, and see you next time.
My blade just keep flying off.. would this mabye be a fix for that?
I am a fan of going ahead and replacing parts if you have new ones, while you already have the tool apart. I would have put the new back bearing on. Also, instead of leaving the old bearings on one post... Since the front ones obviously take the most abuse... I would have put the old bearings on the back of each post, and the new bearings on the front of each post.
So is there something wrong with your website links
Hope you have not been to busy to get out with your Bow?
Where did you get that quick attach table?
I made it.