Thank you I was doing the very job on my Jeep And I have to say thanks for the short shorts very nice, love it, . To get door handle off I used a 2 and 1/2 inch nail held upside down with pliers, used screwdriver to pry out handle just enough to get nail head around clip and pulled up with pliers.
Great video. I run into those little surprises all the time. Happens to all of us. One suggestion with the door linkage...Life's gotten complicated. Before I disassemble or unwire ANYTHING, my phone/camera comes out to snap a couple of snapshots. It saves panic when reassembling, like a time machine.
rolling my eyes at all the guys who commented on YOU instead of your tutorial. from another jeep girl, thanks for this! i'd love to see more how-tos 👍🏻
Let’s be honest here..That’s why she dressed the way she did. She used her body to increase views. There are a million videos on TH-cam about whatever it is she was doing so she showed some ass to kill the competition.
Its a lot easier to just remove the clip holding the lock in.... and Unhooking from the lock mechanism(at the opening), and pulling the tumbler and the lock rod out through the outside... align the tumblers[new/old] remove the clip off old tumbler( with rod attached) ... put in through the outside... replace original clip attach locking rod... But i appreciate the video, as it got me there.. Thanks
Thanks to your video I was able to removed the window roller up thinging. Spend six bucks WTF, once you said there was a clip. A 90 degree pick and 2 minutes later. I can buy a half a pint of Jack Daniels with that. Thanks again.
Why no more vids? As a automotive body man I enjoy watching others work to see if I can pick up new tricks on how to do my job faster. It's always good to see a women do a "man's" trade. Keep up the good work.
If you need an extra hand use a clamp to hold the lock in, works great. If the tension clip does not want to go in correctly, one prong correct but the other will not go in the groove. Lay it down on a flat surface and see if the prongs are bent uneven. Found that was an issue with one side.
It takes less than 4-seconds to pop the door-lock open, without scratching the paint or marring the weather-strip. A video on how to install an anti--theft shield for the door-lock would be of high value.
thank you.. i ran into the same problem with the locks.. thank god its only $50... i installed some pop lock on mine.. i went the opposite direction.. how much did you pay for the yellow full doors? i subbed.. i got some jeep videos too..
I never lock my Jeep. Some clown will just cut the soft top to get in if they want in...Great video though! The damned full steel doors on my Jeep are the source of most of my rage. ;)
My Jeep Wrangler 1996 is a two part doors with a sliding window, still having problems finding a video on how to take it apart. A lot of these videos don't show this
This video is not 100% accurate. The clip that holds the window handle can be removed with a hook tool. Once the screws are taken off the panel does not come out as easy as the video shows. If you are doing a video just to show off this is perfect...
I feel bad for the chick in the video cause all these pervy comments like I’m just trying to fix my doors, like how did these dudes end up on this page like were they actually looking to repair doors or what?
OK video, but why do people have to use the "F" word? We learned more about you than your ability to work on a Jeep door. Girls are more attractive with clean language. Anyway, thanks for the video.
![ลองสั่งของจากแอพ temu ถูกจริงหรอ?? ( part : 1/2 ) [โกงไหมครับ ep.89 ] | DOM](http://i.ytimg.com/vi/RTcZSQTiDZw/mqdefault.jpg)
Good vid! I watched half a dozen others before I found this one. Straight to the point and good camera angles.
That red and yellow looks like a mc donalds jeep
Excellent point about lowering the windows before attempting to reinstall the door panels/cards.
Great video! I love seeing DIY TJ videos. Keep the videos coming.
Thank you I was doing the very job on my Jeep And I have to say thanks for the short shorts very nice, love it,
. To get door handle off I used a 2 and 1/2 inch nail held upside down with pliers, used screwdriver to pry out handle just enough to get nail head around clip and pulled up with pliers.
Great video. I run into those little surprises all the time. Happens to all of us. One suggestion with the door linkage...Life's gotten complicated. Before I disassemble or unwire ANYTHING, my phone/camera comes out to snap a couple of snapshots. It saves panic when reassembling, like a time machine.
I think i saw a nice kitty 😻
rolling my eyes at all the guys who commented on YOU instead of your tutorial. from another jeep girl, thanks for this! i'd love to see more how-tos 👍🏻
Lol......well she have beautiful toes.
Let’s be honest here..That’s why she dressed the way she did. She used her body to increase views. There are a million videos on TH-cam about whatever it is she was doing so she showed some ass to kill the competition.
Go make me a sammich!! Hahahaha!!
i wish u would post videos so I dont have to roll my eyes looking at your beauty as well
Dress loose....get loose comments
Very cool video...it saved me some time on the handle. Thanks for sharing
Its a lot easier to just remove the clip holding the lock in.... and Unhooking from the lock mechanism(at the opening), and pulling the tumbler and the lock rod out through the outside... align the tumblers[new/old] remove the clip off old tumbler( with rod attached) ... put in through the outside... replace original clip attach locking rod... But i appreciate the video, as it got me there.. Thanks
Thanks for the video Changing doors also on my 05 tj .This was very helpful as mine will need two keys made also
Love how easy you make it your great at doing the door
Thanks to your video I was able to removed the window roller up thinging. Spend six bucks WTF, once you said there was a clip. A 90 degree pick and 2 minutes later. I can buy a half a pint of Jack Daniels with that. Thanks again.
Funny comment. But yea i agree, that's about 1/2 the cost of a 12pk for me LOL
Thanks for the fbomb, was watching with my little kids
Luke Skywalker Lmfao!!
Why no more vids? As a automotive body man I enjoy watching others work to see if I can pick up new tricks on how to do my job faster. It's always good to see a women do a "man's" trade. Keep up the good work.
A paint can opener will work on that window crank with a little extra pushing in on the panel.
Upload more this helped me so much!
You are awesome! Love you!
Great job helped me out immensely
What happened to this girl? More vids please! I don’t have a TJ but I watched the whole video. SMOKIN HOT!!!!
If you need an extra hand use a clamp to hold the lock in, works great. If the tension clip does not want to go in correctly, one prong correct but the other will not go in the groove. Lay it down on a flat surface and see if the prongs are bent uneven. Found that was an issue with one side.
i liked when the window handle popped off so smoothly. nice tool! worth 6 bucks for sure!
excellent job and great video
Great video,hope to see more wrangler tj mods videos
We need more videos saved my friends door haha
Great video thanks for the update!
You have more info of 6 USD tool. part number or something else to get from.
Dayum beautiful!
Great video! I’m replacing my outer door handles. What is the name of the tool you used to remove the window roller?
Shane Stephens
Upholstery Remover
It takes less than 4-seconds to pop the door-lock open, without scratching the paint or marring the weather-strip. A video on how to install an anti--theft shield for the door-lock would be of high value.
Awesome video, cracked me up "that was fking amazing"! I need to do this on my TJ and this is the best video on TH-cam, Subbed:-)
Informative and nice to look at. What could be better?
thank you.. i ran into the same problem with the locks.. thank god its only $50... i installed some pop lock on mine.. i went the opposite direction.. how much did you pay for the yellow full doors? i subbed.. i got some jeep videos too..
Wait !!! Hold up!!! I can make my manual crank windows automatic?!
Tool For clip is a Lisle Window clip remover. Adavance Auto Parts # Lis 18600... There ya go..
That soul snatcher 9000
Great video keep posting
Thank You!
Nice jeep
I love this jeep 😍❤️😍❤️😘
I never lock my Jeep. Some clown will just cut the soft top to get in if they want in...Great video though! The damned full steel doors on my Jeep are the source of most of my rage. ;)
Nope, they just break the lock. That's why I'm watching this video.
More videos!
Freakin tool was a lifesaver never knew it existed. Bar was bent in my door just didnt lock it for 2 years lol
Cute young lady. Very good video. Thanks
My Jeep Wrangler 1996 is a two part doors with a sliding window, still having problems finding a video on how to take it apart. A lot of these videos don't show this
Oooooo she change her short to a wild and better...
Girl, give us more videos pls
Do you still have e your Jeep?
This video is not 100% accurate. The clip that holds the window handle can be removed with a hook tool. Once the screws are taken off the panel does not come out as easy as the video shows. If you are doing a video just to show off this is perfect...
Window roller is a straight tip screw driver. You don't need that tool.
Are you making more videos? How's the jeep???
Yeah that's not even my year model Jeep and I watch the whole video. She looks really nice
I've got a 2014 Wrangler with electric windows. Can't open the door from the inside.
Upload moreeeeee
Just came across this video. God damn she's fucken 🔥
What happened to this person? Their IG isn’t there snd this was a well done video but nothing more
What Jeep?
What ever your selling im buying!!!
Падруга, реально шарит!!!
Thank you
If you were a guy everyone here would be telling you your doing it wrong!! hahah great vid
My love
Make more videos
Great vid! Part number on door trim removal tool please?
i just sub keep the vids goin
Helpful vid don't hurt your nails beautiful
OMG, Check this girl out..she's amazing..love the shorts..
Wow 😍
I need to find me a red jeep girl
Are u gonna repaint doors to match?
Different color doors rule
🔥
Hermosa mujer con shorts.
Beautiful girl
I feel bad for the chick in the video cause all these pervy comments like I’m just trying to fix my doors, like how did these dudes end up on this page like were they actually looking to repair doors or what?
Can we talk jeeps over dinner
😲 ❤
Linda
The distraction in this video made me watch it 8 times before I figured out what we were working on.
she is cute i cant understand how to fix it
Omg marry me
boy must have took her a couple days to do this.. she changed her shorts
damnn shes HOT..
Girl in shorts
Them legs
Nobody asked you and she didn't upload a tutorial video for you to comment on her body. Fucking scumbag.
The next video could be about how to make auto repair interesting and get a lot of views while doing it by exposing major camel toe! 🤣
🐫
I fell in love. will you marry me?
is anything for sale? including her?
Sweet jeep! And I woman that can work on her jeep is sexy!
Hey TH-cam!
Please stop making stupid people famous. Please!
Damn......oO
I agree Jeep repair with a camel toe
Camel non filters
I see, y r not Single. 😕😕
OK video, but why do people have to use the "F" word? We learned more about you than your ability to work on a Jeep door. Girls are more attractive with clean language. Anyway, thanks for the video.
Lol. FUCK get this tool. Love it. 👍