There is a mess of things he did not show or did not explain clearly. Especially if this is your first time, this job can be a bear once things dont go as easy as he made them look. Watch other videos. There are key things you must do so the reinstalation goes as easy as seen here.
how do you know if the rack is bad ? when turning the wheel on my 2003 lx 2.4 the wheel has a wobble and tries to turn back some and has wobble when braking
How was this a great video lmao he didn’t even show the very specific part where he takes off the steering rack from the steering an puts it back on video is complete trash
@@pacetansasonny_soei2515 Did you loose both sides subframe. In the video you only did one (@2.00 and then @2.11). Any danger of everything dropping to the floor lol.
What about the bracket under the rear motor mount (only on 4 cyl)? It keeps the steering rack from lifting out. That's one of the hardest parts, I can see it at about 0:52, and you didn't show anything of it.. Also, there's no 5/8" anything on that car. Maybe you mean 16mm (almost equivalent), but there are none of them on this job either.
5/8 is a 16 just like 3/4 is a 19. This guy just showed you the short cut. It’s what you learn to do when your a pro. If you think that’s crazy I would blow your mind if you saw me take a torque converter out of a Camry without dropping the sub frame or completely removing the transaxle. And that rack slides to the left no need to lift it up. Take a second look 😉
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 4](http://i.ytimg.com/vi/e7Oqqo90x_w/mqdefault.jpg)
There is a mess of things he did not show or did not explain clearly. Especially if this is your first time, this job can be a bear once things dont go as easy as he made them look. Watch other videos. There are key things you must do so the reinstalation goes as easy as seen here.
Quick and to the point I like this video
Se encuentra nueva en el mercado la cremallera del Accord 2004?
how do you know if the rack is bad ? when turning the wheel on my 2003 lx 2.4 the wheel has a wobble and tries to turn back some and has wobble when braking
Great vid 🙂
Thank you 🙏🏻
Thank you for just showing without all of the blah blah blah!
Great video bro 👍i have to change mines tomorrow
Thank you🙏🏻🙏🏻
How was this a great video lmao he didn’t even show the very specific part where he takes off the steering rack from the steering an puts it back on video is complete trash
Man last time I did that it was hell idk how the hell you pulled that off
Hello,
Thank you for sharing a very helpful video.
I have a 2013 honda accord 4 cylinder EXL
Is the replacement the same or deferment?
Thank you
Oh you’re welcome,,,
Maybe the same🙏🏻
Mantap
Thank you bro 🙏🏻
I paid 650.00 to get mine replaced on my 2000 Honda civic, my mechanic did the alignment for free.
Wouldn’t happen to be in Dallas? Lol I need mine replaced on my 186k RSX Type S
Is it that easy to take out ? , becasue other videos they take of the bracket loose the subframe take off Mounts and most even use a three man team
Just lose all Frame bolts
@@pacetansasonny_soei2515 Did you loose both sides subframe. In the video you only did one (@2.00 and then @2.11). Any danger of everything dropping to the floor lol.
Is this the same for a manual transmission accord ? 2.4L
Yes sir👍🏼
Clutch is right over the steering inside so it may be harder
Can you change my power steering rack kuya
what rack and pinion did you buy and where did you order it from?
I bought from Autozone….
They have in stock of The rack & pinion
@@pacetansasonny_soei2515 its garbage material from autozone ...they sell bad inferior parts...
@@DjSkyattack Yeah if you're buying "Valuecraft" Otherwise it's all pretty decent when it's not rebuilt junk.
@@pacetansasonny_soei2515 hello I have a question is it leaking right now after one year??
Sir is that aftermarket parts rnp?
Yes, owner bought from Autozone.
Saya suka mobil
Oh iya he he
Terimakasih 🙏🏻🙏🏻
is this the same for a 2005 V6 Coupe?
Yes 👍🏼
You forgot to mention securing the steering wheel so it doesn't move...
I gotta bad power steering leak to. How soon can get to me.😜 Good video 👍
Where you at?
@@pacetansasonny_soei2515 Alabama 😩
Did you center the rack before reinstalling?
Yes sir, i did
@@pacetansasonny_soei2515why not explain that?
No dropping subframe? I need this done and I'm near San Bernardino.
Nope, i am just little bit lose frame boot
Bolts
Did you have to drop frame
Little bit
are you in california? if so do u want my business?
Sorry i am traveling mechanic, right now i am in Seattle , Washington
How much too do this I’ll bring it too you
Where your lication?
*sorry i am late response
@@pacetansasonny_soei2515 Hayward
@@Tarzan510 this my number
9096781524 can you text me?
What about the bracket under the rear motor mount (only on 4 cyl)? It keeps the steering rack from lifting out.
That's one of the hardest parts, I can see it at about 0:52, and you didn't show anything of it..
Also, there's no 5/8" anything on that car. Maybe you mean 16mm (almost equivalent), but there are none of them on this job either.
I never touch the bracket motor,
This 4CYL
Just loose the frame bolts approximately 1”
5/8 is a 16 just like 3/4 is a 19. This guy just showed you the short cut. It’s what you learn to do when your a pro. If you think that’s crazy I would blow your mind if you saw me take a torque converter out of a Camry without dropping the sub frame or completely removing the transaxle. And that rack slides to the left no need to lift it up. Take a second look 😉
Bad bad cameraman running so fast and not clear to see