@@HAL9000. yeah, I know. I just thought it might be another way to work around it. I get when people want to make their items as screen accurate as possible, and I respect that. However, the devils advocate smartass side of me comes out sometimes and wants to remind people that my Kenner proton pack toy from the 80s is just as effective at catching ghosts as the $2,500 screen accurate props. 😁
Nice video. I have an idea for. Video I'd like to see. I just bought a LC 1 pack (not Alice) because it had the v shape strap. How can I mod that to fit my LC 2 Alice frame ? Specifically the proper way to tie the knot at the bottom.
It’s not really a knot. Run the bottom end of the strap with the loop through the hole on the frame, from the inside out. Then run the rest of the strap through the loop and through the slots at the top.
By chance are you able to let us know the inside diameter of the foam and the wall thickness .. just asking for a friend 😅 bloody love your videos mate 🤙
@@TheProtonPackIsNotAToy i really appreciate the help mate. I had every intention of buying a piece back on 2020 but IRL stuff happened and well here i am no scrambling to find what i can haha
Amazon, this was more than enough: www.amazon.com/Bates-Gaffers-Gaffing-Gaffer-Electrical/dp/B08LZPHHR1/ref=mp_s_a_1_4?dchild=1&keywords=gaffers+tape&qid=1625518884&sprefix=gaff&sr=8-4
Hopefully doing my GB1 in the next few days. Can I just ask, as the roll sits pretty much on top of the bar, what's the trick to stop it from falling down and the bar ending up in the centre like the GB2 style? Thanks
The tape itself helps some. I’ve since cheated and put small cardboard tubes inside. I have a habit of picking it up by the foam, and it was crinkling the tape up when I did so. The tape I bought isn’t staying put as much as I’d like either.
The rolls in GB1 were initially fully over the bar, like in GB2, but because of the way they taped it on, it always slipped up and off, for the look seen in the film.
It’s white foam wrapped in black gaffer’s tape with the ends painted black. You can see it well in the close ups when Ray talks to Gozer. There’s also a blank white spot in the middle behind Venkman’s head just before the earthquake on the street.
Very cool, looks great, dude.
Just use pipe insulation foam.
Couldn't you also just buy a black foam roll for the GB1 frame and paint the inside a light gray or off-white color?
You could, but then it wouldn't be authentic. He's recreating how they did it in GB1.
@@HAL9000. yeah, I know. I just thought it might be another way to work around it. I get when people want to make their items as screen accurate as possible, and I respect that. However, the devils advocate smartass side of me comes out sometimes and wants to remind people that my Kenner proton pack toy from the 80s is just as effective at catching ghosts as the $2,500 screen accurate props. 😁
would be it easier to use a saw or an electrique knife?
Nice video. I have an idea for. Video I'd like to see. I just bought a LC 1 pack (not Alice) because it had the v shape strap. How can I mod that to fit my LC 2 Alice frame ? Specifically the proper way to tie the knot at the bottom.
It’s not really a knot. Run the bottom end of the strap with the loop through the hole on the frame, from the inside out. Then run the rest of the strap through the loop and through the slots at the top.
By chance are you able to let us know the inside diameter of the foam and the wall thickness .. just asking for a friend 😅 bloody love your videos mate 🤙
Sorry just saw this, roughly 3/4 inch for both measurements, but that’s with the foam pinched around the top bar along the split.
@@TheProtonPackIsNotAToy i really appreciate the help mate. I had every intention of buying a piece back on 2020 but IRL stuff happened and well here i am no scrambling to find what i can haha
Nice shirt👍
Very useful guide. Thanks very much
Hello, where did you happen to get your gaffers tape from?
Amazon, this was more than enough:
www.amazon.com/Bates-Gaffers-Gaffing-Gaffer-Electrical/dp/B08LZPHHR1/ref=mp_s_a_1_4?dchild=1&keywords=gaffers+tape&qid=1625518884&sprefix=gaff&sr=8-4
@@TheProtonPackIsNotAToy thank you very much for the info. I will be adding this to my pack for a more specific and accurate look. Thank you again.
Hopefully doing my GB1 in the next few days.
Can I just ask, as the roll sits pretty much on top of the bar, what's the trick to stop it from falling down and the bar ending up in the centre like the GB2 style?
Thanks
The tape itself helps some. I’ve since cheated and put small cardboard tubes inside. I have a habit of picking it up by the foam, and it was crinkling the tape up when I did so. The tape I bought isn’t staying put as much as I’d like either.
@@TheProtonPackIsNotAToy
Thank you for reply, will give that a go. Have bought the same ink paint you have used too
The rolls in GB1 were initially fully over the bar, like in GB2, but because of the way they taped it on, it always slipped up and off, for the look seen in the film.
Instead of using scissors you can just use ahobbyblade with acutting matt
But the foam is black in GB1?
It’s white foam wrapped in black gaffer’s tape with the ends painted black. You can see it well in the close ups when Ray talks to Gozer. There’s also a blank white spot in the middle behind Venkman’s head just before the earthquake on the street.
Thanks for another good video!
I like it ; )