Took me almost 5 hours, numerous videos and even the garbage instructions to figure out how to install this fan. It actually took less time to build my PC from the ground up than it did to install this one fan. This was the only video, along with the twitter video, that was actually useful and helped me complete the stressful process. It's too bad that the cable which goes from the rear fan to the front fans is so short. Would have been nice to have the cable run through the back part of the case instead of the front where it's somewhat noticeable. Thanks for the video. I was coming close to returning this fan to Amazon lol
I connected everthing how it's supposed to be and the fans work and give of white light. I have a rgb controller but nxzt cam doesn't change the colours.
I have the same case fan but im mounting on the top of the case. At this point I just want to plug it straight into the motherboard, ive been working on this pc way too long:,)
NO. Leave PC plugged in but power supply turned off. This keeps the PC connected to a grounded connection. This is important so that you don't short anything if you keep touching the case regularly. It's perfectly safe as the PSU is off so wont be outputting any electricity.
@@Nickyo Hey, I am planning to buy 2 fans for my NZXT H510 case. Is that alright? Because I still dont understand the difference between intake and exhaust. Question: If I want 2 fans for my H510 case can I just order 2?
You can change any fan to be either intake or exhaust just by switching it around! Do take note that you need the Hue2 hub for rgb fans if youre thinking about building inside the normal H510 and not the elite!
hi Do you know if I can add one more Aer RGB 2 120mm fan to my existing daisy chain connected to my Z73, without having to purchase an HUE accessory? So, the Z73 comes with 3 fans, but I bought 2 kits of 3 fans each. However, my case has 10 fan slots, so I want to buy a single Aer RGB 2 120mm fan that matches the ones that come with the Kraken Z73 to complete my build. My question is whether the chain of these 3 fans, controlled by the Kraken, can support a fourth fan of the same type to be placed at the back of my build.
Great video @Nickyo. Thanks for the video! We have a compact H-510B case with two fans. I replaced the top fan with the AER RGB 2 and left the back fan with the stock fan but am not sure if I hooked it up right. Both fans spin but the AER RGB 2 fan is not lighting up. I didn't touch the stock fan and wired the AER RGB 2 to the lighting controller (nothing to/from the in/out ports) and lighting doesn't work. The LED strips out of the controller work fine. Is it possible to replace just one fan or do I have to replace both in order to get the lighting to work?
Do you know who I am not seeing my front two fans on the NZXT CAM app? I’m only seeing my Led strip, the fans are on but only in white RGB , I’m not sure what to do
Hi. I just install the rgb fan. End up the fan working fine and the default rgb light (white) is turn up. However when i start a NZXT cam software, the software cannot detect the fan. Do you mind to help me? Running out of ideas already 😅
can the direction of the fan’s spin be changed? I wanted 6 of these for a Lian Li o11 Dynamic Mini build…but the LEDs would be completely blocked if I use them as intakes on the bottom
so i just want to buy one of those fans. I want to take out one of the fans from my case and plug Aer rgb fans directly to the motherboard without putting anything to the in or out holes on the fan. Will this work?
Bro i bought a NZXT H5 elite mid tower case but it does'nt come with the rear fan or exhaust fan is f120rgb fan with 3 pin compatible for exhaust fan or rear fan? Thanks in advance bro!
I actually have a short video showing you how! I also had the same problem with the h510 elite and managed to do it without any extra cables, it should be pinned comment or check description!
hey, so i bought a corsair 4000x case which comes with corsair rgb fans, i also bought the nzxt z63, how do i connect all of these fans to the motherboard, i have the corsair connected nd its working, but the aer 2 fans rgb are not working.
Please help, I recently got a nzxt fan but I an issue occurred where the fan will not light up. I am new to building a pc and I wanted to know if I will need an extra component to make the nzxt fan light up...
Im not ignoring the question just on vacation and no access to pc. When I get back ill let you know! Usually I get my wallpapers by typing pastels/nebula/seasons on wallpaper engine though :)
I’m building my first pc pretty soon with the NZXT H510 flow case, with one controller will I be able to connect 4 of these fans (2 140mm in front and 2 120mm in back) as well as an RGB light strip?
Yup the good thing about nzxt fans is you just need to feed them power and then you can daisy chain all the fans you want together. I have 4 rgb fans and the rgb light strip all in on controller
For intake and exhaust fans, can you swap which side the RGB is on? You see opposite sides of the front intake and rear exhaust, so you should be able to just swap it, right?
Im planning on buying this case and im using the b450 tomahawk max and do i need buy any external controllers or anything to make the front rgb fans glow?
Dumb question time! If I’m just replacing my existing fans from my NZXT pre build, do I just need to plug these into the precious fan slots? Or do I need a whole new cable as well for the RGB?
Will the fans light up rgb without NZXT CAM? I uninstalled nzxt cam because it made my cpu get hotter by 30 degrees. Once I uninstalled it, the temp dropped down to normal 31 degrees Celsius. I’m thinking about getting Corsair rgb fans if I need NZXT CAM
Sorry for the late reply, it does not. It comes with the normal 120mm fans that all h510 cases come with which are the rear and the upper fans but youll have to purchase the front fans seperate
Are you sure they’re not spinning? It might just seem like they are not. Check to see if they’re connected to the hub and if the hub is correctly connected to mobo/case!
@@Nickyo thanks for the fast reply. I already own a Hue 2 hub so Im trying to save some money by not buying the starter kits which come with another hub
You’re very welcome, I have another video explaining the daisy chain, it should be the pinned comment, you can see all 3 cables and the route I took for cabling if you’re needing that extra bit of help. Let me know if you manage to connect it!
Honestly im not quite sure. If I were to guess id say no since the only way to manage lighting would be through NZXT cam software. I think with this fan in specific it needs to he the hue 2 hub, however I could be wrong!
@@Nickyo no, you are 100% right. my friend came to me said only by using nzxt controller can manage the Rgb or even the to light up a static white colour. Thank you sir. it really help me👍🏻
so i just ordered the x73 with rgp. and i want 3-6 rgb fans for my lian li case. so 9 fans in total. can i plug 3 fans in each rgb header (mobo) with some 3y-connectors. or do i need the hub
So recently, I ordered a X53 rgb cooler and 3 nzxt aer rgb fans. Looking through the nzxt controller, I only see 3 fan ports, is there a way I can fit all 5 fans into 3 fan ports?
I would like to know how do I control 7 fans of nzxt on a motherboard x570 aorus xtreme? being that it only has 1 usb 2.0 connection and I have a toilet kraken x72?
@@Nickyo thanks. I just got a kraken cpu cooler and it came with one of the rgb fans and I was wondering why it wasn’t giving me the lights when I plugged it on the regular channel fan ports.
Yeah it seems like NZXT is a really closed environment sadly. Congrats on the cooler im still debating if its worth it in my rig just for the aesthetics :)
I bought 2 fans and a fan controller (bought the controller separately) but there wasnt the rgb cable for my fan included and i cant find it on amazon.
@@Nickyo do you know where i can buy the cable only? Because in both my fans packaging there wasnt the rgb cable that connects my fan to the controller.
Im kinda baffled that your fans didnt come with them included. Are they second hand? Moreover it might seem dumb but have you thoroughly checked the packaging? If theres still nothing amazon or the nzxt website should have spares!
@@Nickyo i bought it from amazon (new) but they wanted me to return them for the same product but i didnt want that cuz both of them didnt include the cable so there is no point of waiting. Gladly nzxt fixed the problem in under 10 minutes they will send me the cable without any extra costs the only thing they wanted was proof that i bought their product.
Thats amazing customer support on NZXT! Im very surprised that no cables were included but im also very glad everything was sorted out! Did they give you a timeframe for when you would receive the cables for installation? Hopefully its soon :)
@@tobysandoval416 You need to daisy chain them to either the front fans via the the ports or to the motherboard. You also need to connect them to whatever port the fans were connected to the Hue2 hub. If you're having issues and cant seem to get them to work, join my discord thats linked in the description and we'll try to sort it out!
You can install with any case via the motherboard headers! With Nzxt cases its easier as the whole environment is created with these in mind. However you can buy the Hue 2 hub and use it with any other case!
Are you correctly screwing them? Try each diagonal corner slightly then tighten them down! Let me know if it works if not ill try to come up with something else!
total POS fan in terms of the RGB... product does not specify you need a USB Fan RGB controller... on account of this connecting the fan directly to the mobo only blows the RGB in the fan and is unreadable by Cam.
Definitely an issue on their part only being able to use the controller for cam! Sadly its a super closed environment that works really well once your in the ecosystem but yeah I completely get your point.
Theres nothing really to show, its really just a cable going from one fan to another. So from the bottom output conector on the bottom 140mm fan up front to the input conector on the 120 fan
@@NickyoPlease do, if it took you hours without instructions, it’ll take your viewers hours without instructions. The Instruction Manual made literally 0 sense.
Damn, you're right. No excuses but acronyms tend to be read in other languages rather than pronounced as a whole, was a thinking in another language throughout the whole video I guess. Will work on this for the future.
hi Do you know if I can add one more Aer RGB 2 120mm fan to my existing daisy chain connected to my Z73, without having to purchase an HUE accessory? So, the Z73 comes with 3 fans, but I bought 2 kits of 3 fans each. However, my case has 10 fan slots, so I want to buy a single Aer RGB 2 120mm fan that matches the ones that come with the Kraken Z73 to complete my build. My question is whether the chain of these 3 fans, controlled by the Kraken, can support a fourth fan of the same type to be placed at the back of my build.
For those wondering how to daisy chain the fans, I made a short video on my exact process! Check it out!
th-cam.com/video/tZbhNKOczmc/w-d-xo.html
Hello Nickyo why my rgb light just a part bright？ only red ？ I got the same product as you
Can u show how to connect the cable for the fan contoller
This started like an apology video
A good or a bad apology video though?
@@Nickyonun of them are good
Took me almost 5 hours, numerous videos and even the garbage instructions to figure out how to install this fan. It actually took less time to build my PC from the ground up than it did to install this one fan. This was the only video, along with the twitter video, that was actually useful and helped me complete the stressful process. It's too bad that the cable which goes from the rear fan to the front fans is so short. Would have been nice to have the cable run through the back part of the case instead of the front where it's somewhat noticeable.
Thanks for the video. I was coming close to returning this fan to Amazon lol
Im glad I could be helpful! Sadly the cable is too short :(
Whats the solution on this one? Im having trouble with a short cable as well :(
I have the same case as you and I want to buy the Nzxt fan but can you tell me the back fan ( where you put your new fan ) is 120 mm or 140 mm?
Back fan is 120mm top fan is 140mm!
@@Nickyo thx you man
great quality video, your production is better than people with much larger channels!
Thank you so much! I strive to produce the best videos I can with what I have and getting that recognition means everything to me :)
That transition at 3:46 😍
Great work guys!
Glad you enjoyed it! We're working super hard on everything :p
This helped so much, thank you!!
Glad it helped 😬
I connected everthing how it's supposed to be and the fans work and give of white light.
I have a rgb controller but nxzt cam doesn't change the colours.
Sorry for the late reply - Might want to check that everything is up to date with the software and double check if theyre daisy chained correctly!
I got free replacements.
Turned out the fans were broken.
Such a quality review. so underated. Im subbing
Im glad you enjoyed it! Hopefully quality only gets better and better :)
Yeah funny thing about that manual, NZXT gives you a QR code now and just takes you to there website to buy more fans...
lol
I have the same case fan but im mounting on the top of the case. At this point I just want to plug it straight into the motherboard, ive been working on this pc way too long:,)
How did you get these to light up without the controller. I did not see any portion of that in your video so just wondering
NO. Leave PC plugged in but power supply turned off. This keeps the PC connected to a grounded connection.
This is important so that you don't short anything if you keep touching the case regularly. It's perfectly safe as the PSU is off so wont be outputting any electricity.
Thanks for this! I actually had not thought of it! Will use for future builds!
hey i have a problem .. my NXZT CAM no longer recognizes the fan and the water cooling. at first it worked but after a while it no longer worked.
Maybe a software update or a loose cable in the back?
@@Nickyo if you mean cam software update .. already did that .. and theres no loose cable
Finally someone makes a straight forward video without bs fluff. Subbed!
Appreciate it hope you enjoyed 😊
@@Nickyo Hey, I am planning to buy 2 fans for my NZXT H510 case. Is that alright? Because I still dont understand the difference between intake and exhaust. Question: If I want 2 fans for my H510 case can I just order 2?
You can change any fan to be either intake or exhaust just by switching it around! Do take note that you need the Hue2 hub for rgb fans if youre thinking about building inside the normal H510 and not the elite!
hi Do you know if I can add one more Aer RGB 2 120mm fan to my existing daisy chain connected to my Z73, without having to purchase an HUE accessory? So, the Z73 comes with 3 fans, but I bought 2 kits of 3 fans each. However, my case has 10 fan slots, so I want to buy a single Aer RGB 2 120mm fan that matches the ones that come with the Kraken Z73 to complete my build. My question is whether the chain of these 3 fans, controlled by the Kraken, can support a fourth fan of the same type to be placed at the back of my build.
Great video @Nickyo. Thanks for the video! We have a compact H-510B case with two fans. I replaced the top fan with the AER RGB 2 and left the back fan with the stock fan but am not sure if I hooked it up right. Both fans spin but the AER RGB 2 fan is not lighting up. I didn't touch the stock fan and wired the AER RGB 2 to the lighting controller (nothing to/from the in/out ports) and lighting doesn't work. The LED strips out of the controller work fine. Is it possible to replace just one fan or do I have to replace both in order to get the lighting to work?
Do you know who I am not seeing my front two fans on the NZXT CAM app? I’m only seeing my
Led strip, the fans are on but only in white RGB , I’m not sure what to do
Hi. I just install the rgb fan. End up the fan working fine and the default rgb light (white) is turn up. However when i start a NZXT cam software, the software cannot detect the fan. Do you mind to help me? Running out of ideas already 😅
can the direction of the fan’s spin be changed? I wanted 6 of these for a Lian Li o11 Dynamic Mini build…but the LEDs would be completely blocked if I use them as intakes on the bottom
so i just want to buy one of those fans. I want to take out one of the fans from my case and plug Aer rgb fans directly to the motherboard without putting anything to the in or out holes on the fan. Will this work?
Bro i bought a NZXT H5 elite mid tower case but it does'nt come with the rear fan or exhaust fan is f120rgb fan with 3 pin compatible for exhaust fan or rear fan? Thanks in advance bro!
How can i daisy chain the aer 120mm to the front fans (i have h510 elite) ? Cable is too short! It cant go to the hub too!
I actually have a short video showing you how! I also had the same problem with the h510 elite and managed to do it without any extra cables, it should be pinned comment or check description!
@@Nickyo thanks.... you saved me... now i only have to hide this damn cable best as i can
I pushed mine behind my gpu and it comes up right at the fan connector 👀
@@Nickyo i see in the video but i wanna go behind the case,is it possible?
Not with the stock cable, you could behind the gpu through the mobo but behind that length isnt enough sadly
can you tell me how big the fans are on the front i realy want to know because i am building my pc soon
140mm or 280mm for both!
@@Nickyo so 280 and 140 will fit?
Two 140s will fit!
@@Nickyo thank you
hey, so i bought a corsair 4000x case which comes with corsair rgb fans, i also bought the nzxt z63, how do i connect all of these fans to the motherboard, i have the corsair connected nd its working, but the aer 2 fans rgb are not working.
I just bought the kraken z63 and both the front fans don’t spin at all anyone know how to help I’ve tried a few combos and can only get one working
I heard you can’t use the aer as an exhaust cause you can’t flip the fan orientation??
Please help, I recently got a nzxt fan but I an issue occurred where the fan will not light up. I am new to building a pc and I wanted to know if I will need an extra component to make the nzxt fan light up...
You need to connect it to the hue 2 hub or an rgb header on the motherboard in order to get lighting controls!
What is the title of the wallpaper you have on your desktop? It looks dope I wanna use it too.
Im not ignoring the question just on vacation and no access to pc. When I get back ill let you know! Usually I get my wallpapers by typing pastels/nebula/seasons on wallpaper engine though :)
@@Nickyo Oh cool, thanks.
so i have the z53 but my rgb arent working. do i need to do the daisy chain to make it work?
Yes!
I’m building my first pc pretty soon with the NZXT H510 flow case, with one controller will I be able to connect 4 of these fans (2 140mm in front and 2 120mm in back) as well as an RGB light strip?
Yup the good thing about nzxt fans is you just need to feed them power and then you can daisy chain all the fans you want together. I have 4 rgb fans and the rgb light strip all in on controller
@@Nickyo what about with no controller? Can u power up 3 aer rgb fans without it?
@@Nickyo where does the 4th fan plug into since there’s only 3 slots?
Hi sir planning to buy the same fans do i really need a rgb controller for the 2 additional nzxt fans?
For intake and exhaust fans, can you swap which side the RGB is on? You see opposite sides of the front intake and rear exhaust, so you should be able to just swap it, right?
Sadly no, you can only turn them around you cannot swap the rgb.
@David Santiago Yup!
You should also remove your watch to avoid static shock build up to the system.
I generally do! Oversight on my part since I was recording :p
@@Nickyo no worries, thanks for the How To.
I was not smarter than you ;( I spent hours setting up 1 fan to a fan hub...
I feel you :(
Im planning on buying this case and im using the b450 tomahawk max and do i need buy any external controllers or anything to make the front rgb fans glow?
Nope I have a B450 tomahawk max, setting it up normally should get the RGB addressed fine!
@@Nickyo so i dont must to get a Controller i have a b550 gaming carbon wifi
Dumb question time! If I’m just replacing my existing fans from my NZXT pre build, do I just need to plug these into the precious fan slots? Or do I need a whole new cable as well for the RGB?
The cables come with the fans! Just connect the power to the aforementioned fans and daisy chain for rgb!
Will the fans light up rgb without NZXT CAM? I uninstalled nzxt cam because it made my cpu get hotter by 30 degrees. Once I uninstalled it, the temp dropped down to normal 31 degrees Celsius. I’m thinking about getting Corsair rgb fans if I need NZXT CAM
no u have to haze nzaxt with nzxt made the same mistake
How did you connect RGB connector to fan control?
Its connected to the front fans and the front fans are daisy chained between them all the way the the back one
Do cases come with the fan hub or not because if they did mine dis not
Does the NZXT H510 flow come with fans?
Sorry for the late reply, it does not. It comes with the normal 120mm fans that all h510 cases come with which are the rear and the upper fans but youll have to purchase the front fans seperate
So my Aer RGB fans stopped spinning when I start it up. Do you know how I might be able to fix it?
Are you sure they’re not spinning? It might just seem like they are not. Check to see if they’re connected to the hub and if the hub is correctly connected to mobo/case!
Why do I only see two fans and I can’t customize the led colors like how I could with just two?
Have daisy chained the added one?
i don’t have a hub what do i do. i have two aer rgb fans
You can still plug in the fans and they will spin however for rgb you need the hub
Would it be ok to install them in a Corsair 5000D?
Yup thats a beautiful case however you might need to the the hue2 hub
I bought one piece of NZXT AER RGB 2 - HF-28120-B1 - 120mm by mistake i put it as exhaust fan but rgb not working. can you help please?
Did you daisy chain?
does the box have the cabel for rgb connecting? i mean the in out cabel to turn the rgb on
Yes!
@@Nickyo thann you for the answer
so my fan did not come with a controller, and I do not have one. Is there any way to get the RGB to work?
Theres a set where they come with the controller, try connecting it to an rgb header however I wouldn’t be so optimistic
so is there only one fan in the box
Depends on what you buy, I bought 1x but they sell 3x
Is there a fan to fan daisy chain cable included in the box of the single fan package? Great vid btw!
Yes there is! It comes with 3 different cables, one should be the right fit! Thank you :)
@@Nickyo thanks for the fast reply. I already own a Hue 2 hub so Im trying to save some money by not buying the starter kits which come with another hub
You’re very welcome, I have another video explaining the daisy chain, it should be the pinned comment, you can see all 3 cables and the route I took for cabling if you’re needing that extra bit of help. Let me know if you manage to connect it!
@@Nickyo oh cool, I should have noticed. Thanks man!
Do you have to have a controller to use them. 🤔 or can you just link them all together and plug into the fan port on the motherboard?
Yes sadly you do need the controller yo both power and control the RGB
can i install the fans by using other brand controller.? i just bought the fans but it is hard now to find the controller here😌
Honestly im not quite sure. If I were to guess id say no since the only way to manage lighting would be through NZXT cam software. I think with this fan in specific it needs to he the hue 2 hub, however I could be wrong!
@@Nickyo no, you are 100% right. my friend came to me said only by using nzxt controller can manage the Rgb or even the to light up a static white colour. Thank you sir. it really help me👍🏻
so i just ordered the x73 with rgp.
and i want 3-6 rgb fans for my lian li case.
so 9 fans in total. can i plug 3 fans in each rgb header (mobo) with some 3y-connectors. or do i need the hub
You can power the fans with mobo headers however I do think youll need a hub for lighting
So recently, I ordered a X53 rgb cooler and 3 nzxt aer rgb fans. Looking through the nzxt controller, I only see 3 fan ports, is there a way I can fit all 5 fans into 3 fan ports?
For RGB you can daisy chain them, for power sadly no.
i just bought the same things as well. did you find out how to make it work?
I would like to know how do I control 7 fans of nzxt on a motherboard x570 aorus xtreme? being that it only has 1 usb 2.0 connection and I have a toilet kraken x72?
Youll need multiple splitters and controllers
Wich screws am i suppose to use?
Question. Do you need some kind of fan controller hardware to get just 1 or 2 fans going?
Yes you need the Hue2 controller for these fans
@@Nickyo thanks. I just got a kraken cpu cooler and it came with one of the rgb fans and I was wondering why it wasn’t giving me the lights when I plugged it on the regular channel fan ports.
Yeah it seems like NZXT is a really closed environment sadly. Congrats on the cooler im still debating if its worth it in my rig just for the aesthetics :)
@@Nickyo I was able to get both lights and fan going using the break away plugs that came with the kraken cooler. Woo
@@frankdahtank1234 hi pls help me how did u do that what is breack way cable?
Nice Hisoka figure :D
Ah I see you are cultured :)
hey man i already have 2 of these as i bought the nzxt h510 elite im planning to buy 1 of these fans will i need a new fan hub?
because theres only 2 led options in my current one
No you can power the fans off mobo or the hub and for the led options you daisy chain the fans between them!
I’m about to build a pc I got 2 aer rgb 2 fans 120mm how many more would I need and would I need a 140 mm? I have a h710i
The h710i fits 3 120mm fans and 1 140mm, you would need 1 of each more to complete the build!
@@Nickyo thank you so much 😊
I bought 2 fans and a fan controller (bought the controller separately) but there wasnt the rgb cable for my fan included and i cant find it on amazon.
The fans come with all the cables to install
@@Nickyo do you know where i can buy the cable only? Because in both my fans packaging there wasnt the rgb cable that connects my fan to the controller.
Im kinda baffled that your fans didnt come with them included. Are they second hand? Moreover it might seem dumb but have you thoroughly checked the packaging? If theres still nothing amazon or the nzxt website should have spares!
@@Nickyo i bought it from amazon (new) but they wanted me to return them for the same product but i didnt want that cuz both of them didnt include the cable so there is no point of waiting. Gladly nzxt fixed the problem in under 10 minutes they will send me the cable without any extra costs the only thing they wanted was proof that i bought their product.
Thats amazing customer support on NZXT! Im very surprised that no cables were included but im also very glad everything was sorted out! Did they give you a timeframe for when you would receive the cables for installation? Hopefully its soon :)
RGB fan F140?
Do you know if I can use the fan without the hub? Because I mistakenly bought one...
Sadly no.
@@thechange1372 so u have the buy the hub separately to use this?
Yes, sadly
@@shades2168 yes that's the only way to connect the RGB.
I have only one Fan on the back of the case and cable dont reach smart device
What case do you have?
so it does work with my nzxt h510 elite and a b450 tomahawk max right?
Yup, thats my case and also my motherboard!
People still use VGA plug monitors
can I daisy chain the fans and plug one cable into the motherboard?
Yes!
@@Nickyo oh okay, is it the same for the pwm cables ? Or do i need to plug all of them in
what’s the max RPM?
do i need the HUE2 controller?
Its super odd, some people say you can manage rgb without it, but in my experience you definitely need it
@@Nickyo i just plan to have this as a rear exhaust tbh
@@Nickyo so just one AER RGB, and a Z53 AIO
Does the box include the cable for the RGB?
Yes it does!
@@Nickyo Awesome gonna order today
@@Nickyo mine didn't, can i still make the fans light up and sync?
How to install rgb fan and how I make led work on H510 Elite case
Which fan in specific are you swapping the back 120mm or the top 140mm?
@@Nickyo both 120mm n 140mm
@@tobysandoval416 You need to daisy chain them to either the front fans via the the ports or to the motherboard. You also need to connect them to whatever port the fans were connected to the Hue2 hub. If you're having issues and cant seem to get them to work, join my discord thats linked in the description and we'll try to sort it out!
Can I only install the fans only on nzxt cases or other cases?
You can install with any case via the motherboard headers! With Nzxt cases its easier as the whole environment is created with these in mind. However you can buy the Hue 2 hub and use it with any other case!
@@Nickyo Ok ty
Thank's, bro
None of my screws work
cant wait for my order..
Oh boy you’re going to have fun on the install :)
Got myself the triple pack for $99 ;)
Nice!
they ratlle. Can anybody help me with this cuz i allready went back to the store for a new one and i still have the same problem.
Are you correctly screwing them? Try each diagonal corner slightly then tighten them down! Let me know if it works if not ill try to come up with something else!
@@Nickyo I even changed places ....
nice vid man
Hope you enjoyed it 😬
do you need a controller for it
If you’re in the nzxt environment no!
Thank you
You are very welcome :D
What motherboard do you have ?
B450 Tomohawk Max!
@@Nickyo So is it possible to use argb without a 3 pin? Because I thought those fans are argb capable?
None of the fans are connected to my mobo, theyre all connected to the NZXT Hue 2 hub
@@Nickyo oh ok thank you
You didn’t even show the install
It took me hours as well and you saved muly life
Incredible
setup wars ls waltlng for you
Ive thought about it but they take a loooong time to review haha
total POS fan in terms of the RGB... product does not specify you need a USB Fan RGB controller... on account of this connecting the fan directly to the mobo only blows the RGB in the fan and is unreadable by Cam.
Definitely an issue on their part only being able to use the controller for cam! Sadly its a super closed environment that works really well once your in the ecosystem but yeah I completely get your point.
Video thumbnail says ‘how to install’ but the video doesn’t show that at all 👎🏼
I literally installed it though, step by step, what more did you want lol
Dude, you didn’t even show how to daisy chain.
Theres nothing really to show, its really just a cable going from one fan to another. So from the bottom output conector on the bottom 140mm fan up front to the input conector on the 120 fan
I could post a quick twitter video if you do need it though, let me know!
@@NickyoPlease do, if it took you hours without instructions, it’ll take your viewers hours without instructions.
The Instruction Manual made literally 0 sense.
@@6storydrop I appreciate the feedback its my pinned post on the video!
@@Nickyo I appreciate you! Couldn’t find a video anywhere, hope someone finds it their time of need as I did 😭
wut supt
Thousands and thousands of hours of views lost in the first 2 seconds of the video
:/
\:
This dude literally pronounced "LED" as "led"... 😐
LED an acronym, not a word. Weirdo.
Damn, you're right. No excuses but acronyms tend to be read in other languages rather than pronounced as a whole, was a thinking in another language throughout the whole video I guess. Will work on this for the future.
hi Do you know if I can add one more Aer RGB 2 120mm fan to my existing daisy chain connected to my Z73, without having to purchase an HUE accessory? So, the Z73 comes with 3 fans, but I bought 2 kits of 3 fans each. However, my case has 10 fan slots, so I want to buy a single Aer RGB 2 120mm fan that matches the ones that come with the Kraken Z73 to complete my build. My question is whether the chain of these 3 fans, controlled by the Kraken, can support a fourth fan of the same type to be placed at the back of my build.
Thank you
Thank you for watching/commenting :)