thanks for this usefull video about throttle and map sensor. i have really good question about my throttle body issue. to be honest i have problem with my trottle body.because my trottle body does not properly work.when i tested the my trottle body position with my auto doctor diagnostic test, it show me huge problem ,draw signal is continuosly up and down , at this situation generally it is becaming standby position, and finally the car is stopping itself. i think my trottle body is broken ,right?
Sería muy interesante que al final de tu video hubieras mostrado si en el escaner seguía apareciendo el codigo p0068. De todas maneras agradezco mucho tu video. Un abrazo
Verdad tienes razón, mientras ago más vídeos y la gente me pone comentarios de lo que podría añadir entonces trato de hacerlo pero aveces consume mucho tiempo hacer los video tmb. Espero mejorar en un futuro. Gracias por ver y comentar.
air intake carburetor cleaner www.amazon.co.uk/Wynns-1831014-54179-Intake-Cleaner/dp/B0056A1XGO/ref=asc_df_B0056A1XGO/?tag=googshopuk-21&linkCode=df0&hvadid=309775958298&hvpos=&hvnetw=g&hvrand=50096520308921697&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9044962&hvtargid=pla-464235306714&psc=1&th=1&psc=1
Весёлый перчик, отвёрткой тыкал в заслонку, ещё бы ёршиком потер)))) Что за датчик почистил первым? What kind of sensor did you wipe first? Map sensor? cleaning it alone is not enough? Really?
@@DaringBeefcake well if you cleaned the backside of it too by taking off the butterfly itself I wouldn’t have said it was a rubbish job When you have that much buildup on one side the other side will be just as bad Build up like this can cause miss firing and hunting so job half done cleaning only the front
Very informative and accurate, without any extraneous garbage. Exactly what I was looking for. Thank you!
Glad it was helpful!
Thanks for a great video cleaned mine today very straight forward with the step by step notes from yourself
Cheers
Happy to know well done :)
Did mine today but took the throttle body of completely to clean. It drives fantastic now! Thanks for the video 😀
Great to hear!
I found that I had to remove the throttle body and clean it thoroughly on both sides to get the warning light to go off.
sometime you have to do that for sure, thanks for letting us know!!
thanks for this usefull video about throttle and map sensor. i have really good question about my throttle body issue. to be honest i have problem with my trottle body.because my trottle body does not properly work.when i tested the my trottle body position with my auto doctor diagnostic test, it show me huge problem ,draw signal is continuosly up and down , at this situation generally it is becaming standby position, and finally the car is stopping itself. i think my trottle body is broken ,right?
Well it sounds like it might be faulty yes. May be buy a second hand one so it doesn’t cost much to repair in case the problem is something else.
Sería muy interesante que al final de tu video hubieras mostrado si en el escaner seguía apareciendo el codigo p0068. De todas maneras agradezco mucho tu video. Un abrazo
Verdad tienes razón, mientras ago más vídeos y la gente me pone comentarios de lo que podría añadir entonces trato de hacerlo pero aveces consume mucho tiempo hacer los video tmb. Espero mejorar en un futuro. Gracias por ver y comentar.
@@DaringBeefcake Gracias por el tiempo que inviertes en esto , a muchos nos ayudas con tu información. Saludos
مفيد جداً عندي هذا العطل
Glad to hear.
What were the results ?
Problem solved or not?
hi yes, this solved my issue thank you, engine light never came back till now at least.
Which spray do you use to clean ?
air intake carburetor cleaner www.amazon.co.uk/Wynns-1831014-54179-Intake-Cleaner/dp/B0056A1XGO/ref=asc_df_B0056A1XGO/?tag=googshopuk-21&linkCode=df0&hvadid=309775958298&hvpos=&hvnetw=g&hvrand=50096520308921697&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9044962&hvtargid=pla-464235306714&psc=1&th=1&psc=1
Весёлый перчик, отвёрткой тыкал в заслонку, ещё бы ёршиком потер))))
Что за датчик почистил первым? What kind of sensor did you wipe first?
Map sensor? cleaning it alone is not enough? Really?
This worked perfectly fine for me. It worked ok 👌
You did a rubbish job of cleaning the throttle body
Oohhh ok sorry to disappoint :)
Amazing video thanks
May Allah Allah grant u the best always
Very informative and direct
@@DaringBeefcake well if you cleaned the backside of it too by taking off the butterfly itself I wouldn’t have said it was a rubbish job
When you have that much buildup on one side the other side will be just as bad
Build up like this can cause miss firing and hunting so job half done cleaning only the front
@@swwiss that fair enough mate, I’ve got no issues with anyones comments, your entitled to your opinion. So thanks for sharing, and happy new year.
@@mushhoodwaja5779 thank you so much for your comment, all the best to you an all 🙂