Alternatively simply plug the reciever into an empty USB slot, and hardwire the mouse, then do the settings > firmware upgrade (save messing with numpad!!) But your vid got me to the solution so thanks :)
It worked, thank you!! I recommend you guys to use a different mouse to do the firmware update. That way it is easier and you won’t take longer than 2 minutes. Thanks!!!!
You’re a fkn god sent because i took my mouse to a friends house in a backpack came back home and the wireless wasn’t working i thought it was broken OMFG thank you so muchhhhhh
You dont need the dongle or numpad, just have your mouse connected via the wire and plug in the little receiver both. You can use the same mouse to update ur receiver
Holy shit bro you just saved me another 100$ to buy a new one, I love you so much bro much love from Qatar ❤ You deserve a ton of subscribers your underrated. I liked and subscribed. :D
Logitech GHUB just pushed another firmware update. I made sure I plugged me device in and plugged the USB into a slot on my computer. Then pushed the update. It fixed the problem. Wireless is working again. Make sure both the USB and mouse itself are plugged into the computer to receive the updates together.
Thank you dude. Had to pull out a mouse from my closet bc I have a 60% LOL. That was a pain in the butt to try to figure out so I really appreciate this video!
I mean it does make sense that you need to update the receiver as well, but I didn't see the message and was like why the hell is it not working. Thanks for the tech support :,D
Idk if my problem is similar but a month ago my mouse wasnt charging and it kept going down in charge until tomorrow i plugged it and left it for like 3 hours, went to check it and saw it charging and since then it was working fine, yesterday same thing happened it just kept going down in battery and shuts down, im leaving in charge maybe its gonna work like past time, can anyone tell me whats causing this i beg you
It is much easier than this. The receiver is the USB thing that plugs into that. You can just disconnect it and plug it straight into the computer while using your mouse on the charging cord. He clicked all the right stuff for the firmware update it just wasn't necessary to use the keypad as a mouse. The larger block that plugs into the charging cord is just a way to get the receiver closer to your mouse pad for better connection.
I use other way, i pick de usb receiver put in other usb Port then u connect your superlight to the cable( micro usb ) then u must to download the new version and its done
anyone still having problems what worked for me is to plug in the mouse standard cord, and then plug the wireless receiver in its own usb and download that way! hoped this helps also!
TY. This happens when you update connecting only the mouse and the reciever does not get the update because it is unpluged. You have to instal the firmware with both devices connected
do you guys having a problem in g hub that the battery percentage change when plugging in and removing it on the mouse? I charge my mouse and its 100% then after removing it. it becames 97% then I put it back in charged then the g hub says its 50% and keep charging. lol
Great explanation, but i could add further to this by telling to everyone who still experiencing problems, to just turn on and off the button on the bottom of your mouse while its pairing the device
Actually just pull the little USB receiver on your wireless attachment and update it, you won’t have to do any of this. You can keep your mouse plugged in while you do this.
bro for some reason my gpro wasnt working said it was inactive right for like 30 min im trying to figure out how to fix it i got so mad to the point where i hit my mouse and for some reason that worked idk logitech is so annoying but i have to say i love there products
it said it in yellow letters with a warning sign, that u had to have both your mouse and the usb receiver connected at the same time when u did the update
Alternatively simply plug the reciever into an empty USB slot, and hardwire the mouse, then do the settings > firmware upgrade (save messing with numpad!!)
But your vid got me to the solution so thanks :)
this helped me so much as my keyboard is s 60% with no numpad, thank you!
@@dunkinzsoda i still dont know what to do
Insane how Logitech breaks the mouse with an update, thank you for this video, it helped me a lot!
It worked, thank you!! I recommend you guys to use a different mouse to do the firmware update. That way it is easier and you won’t take longer than 2 minutes. Thanks!!!!
Thanks man!
...just separate the little usb reciver from the dongle and plug them both when doing the paring acc...:)
@@The69ZG how to do it
@@The69ZG Thank you so much bro i don’t have a second mouse and i was stressing
@@hibrucetzenh6170did u fix it
homie actually clutched up with this one 🙏 you can also use Fn + WASD (and Q to click) if you have a ducky keyboard.
Bro I tried to do that but nothing happened zzz
i just wanna say that the internet loves guys like you, man.
this is the first time a tutorial solved my tech issues tysm
Yo this worked man took a minute saved me money and I got my sanity back I hope your content creation dreams go well
Thank you so much God is putting me to this path
You’re a fkn god sent because i took my mouse to a friends house in a backpack came back home and the wireless wasn’t working i thought it was broken OMFG thank you so muchhhhhh
You dont need the dongle or numpad, just have your mouse connected via the wire and plug in the little receiver both. You can use the same mouse to update ur receiver
Sometimes thay doesn't work I did it and it didn't work
I can’t use my mouse even while my mouse is plugged in so I can’t update the receiver too
Holy shit bro you just saved me another 100$ to buy a new one, I love you so much bro much love from Qatar ❤ You deserve a ton of subscribers your underrated. I liked and subscribed. :D
thumbs up. i was freaking out today cause i thought my mouse was hard glitched after the firmware update
Same for me lmao
Had the same problem I was mad lmao
Logitech GHUB just pushed another firmware update. I made sure I plugged me device in and plugged the USB into a slot on my computer. Then pushed the update. It fixed the problem. Wireless is working again. Make sure both the USB and mouse itself are plugged into the computer to receive the updates together.
I had been trying to fix it for 2 hours and nothing. I really appreciate the video, I love you. THANK YOU !!!!!!!!!!!
bro this video saved me so much time
another way to do it: plug your mouse in with the cable and the plug the receiver in a usb slot and then update it again
best way, love u
thank you very much
ty so much, i dont have a full kb
what a legend thank you (:
ohh man big thanks from Slovakia you safe my day bro:)))
the sound is a little off, but glad I found this video thank you.
My bad it's my family pc and I plug in good mic but didn't setup it up right
mine doesn t write paired in receiver and write unpaired. What can i do about this?
you literally changed my day i was getting so madd but yeah thanks
Np
I don't usually comment on youtube videos, however, with this epic tutorial, I couldn't resist. You are amazing.
I truly believe you were sent from the heavens for this fix
word dude thanks, running the device pairing tool worked!
Thank you so much! A new sub from Brazil.
Damm I wanna go to Brazil is it nice there. And your welcome
Thank you dude. Had to pull out a mouse from my closet bc I have a 60% LOL. That was a pain in the butt to try to figure out so I really appreciate this video!
Np I hope it saved you
I'm plugging in the receiver into the cable, nothing is showing up in the paring tool it just says "connect your logitech g light speed receiver"
guys my problem is i have a normal g pro wireless and its not getting charged but i can still use it while plugging the cable, any idea why please ?
I love u bro thank you 🙏🙏🙏🙏 I almost give up 🤦🏾♂️😭😭😭
I keep getting the "Connection timed out" error even after turning the mouse OFF/ON in the given limit.
Is there a fix yet? Thank you
Thank u so much i wasted 30 min watching other fix videos. Its that simple lul
bro i love you ur a legend
ty so much bro i would never figured it out with out you, youre the best!!!
I mean it does make sense that you need to update the receiver as well, but I didn't see the message and was like why the hell is it not working. Thanks for the tech support :,D
Yea they should of said something but np
Am i dumb or like even when i have it plugged in yk with the wire the cursor still won’t move and it’s charged and it’s on what do i do
Is the mouse on if it shows green. and make sure its fully in
Thank you bro, helpful guide. I bet many guys are furious from this update
Idk if my problem is similar but a month ago my mouse wasnt charging and it kept going down in charge until tomorrow i plugged it and left it for like 3 hours, went to check it and saw it charging and since then it was working fine, yesterday same thing happened it just kept going down in battery and shuts down, im leaving in charge maybe its gonna work like past time, can anyone tell me whats causing this i beg you
My g pro wireless isn’t working… I wonder if this will work? I have the g pro
It is much easier than this. The receiver is the USB thing that plugs into that. You can just disconnect it and plug it straight into the computer while using your mouse on the charging cord. He clicked all the right stuff for the firmware update it just wasn't necessary to use the keypad as a mouse. The larger block that plugs into the charging cord is just a way to get the receiver closer to your mouse pad for better connection.
Thanks, saved me having to pull out another mouse. ;)
thank you very much my friend, i was about to RMA it lol.
Do you recommend this mouse in 2022? I have the g305 light speed and i want to upgrade for r6
Hell yeah i switched from a g305 also and i never regretted annything
@@capybara7333 Did you buy the super light or the g pro and which do you recommend
Worked , thanks for the help!
i only get a noti on my pc when i plug in the usb but my mouse does not connect through any cable?
My firmware wont update. I have the dongle plugged into the receiver and it isnt updating.
oomg,thank you so much bro, this HELPS ALOT
No problem!
This video has been a life saver. Thank you so much
Thank you bro that Relly fixd my problem .
I use other way, i pick de usb receiver put in other usb Port then u connect your superlight to the cable( micro usb ) then u must to download the new version and its done
Bro you are awesome, thanks for save me.
Not showing the things in the pairing tool it’s still saying i need to connect receiver
you literally changed my day, thank you so much
holy shit, thank you so much man
anyone still having problems what worked for me is to plug in the mouse standard cord, and then plug the wireless receiver in its own usb and download that way! hoped this helps also!
yo this is so much easier thx bro
Thanks was having a hard time
Thenks bro you actually saved me!!
Just Thenks man!!!
nice clutch dudeee, you a life saver
for me i cant do the update at all, no matter how i plug my mouse in it says it i cant install
Plz help me my mouse doesnt work, when im using an other one it doesnt work too idk why
THANK YOU BRO. it is working. repeccct from turkey
Yoooo no way I hope it's nice there
Thank you for your help.. i thought it was broken after this update
Thank you bro i almost mald.
Thank God I had a second keyboard so I used it as you showed
GLAD TO HELP
thank you for the help my man saving a gamer
TY. This happens when you update connecting only the mouse and the reciever does not get the update because it is unpluged. You have to instal the firmware with both devices connected
I have the gpro wireless non super light and it is showing up as a keyboard receiver
do you guys having a problem in g hub that the battery percentage change when plugging in and removing it on the mouse? I charge my mouse and its 100% then after removing it. it becames 97% then I put it back in charged then the g hub says its 50% and keep charging. lol
THANKK YOU IT WORKKSS I THOUGHT IT WAS BROKEN
omg it actually worked bro i love you for that i hate playing with this fucking cable .... liked and subed
Why can’t i find where to access my light like it’s just blank
genuinely a life saver thank you
OMG thank you!! Great job on finding the quick fix!!
Thank you so much man, i dont know how to solve this mf problem. Best regards from Chile
Hi my clicks don't work any of them on mouse g pro super. But can shake ke mouse. How to fix click
how to choose the pairing when my mouse cant be use. im using the pc's. not laptop
Helpful video, thanks man!
Fkin life saver dude, thx a lot!
gOODdam it worked kraazy logitech scaring all of us
Hey where does your wallpaper come from ?
OMG I WAS TRYING FOR SO LONG TYVM
You saved me. Love u!!!
thank you a lot !! difficult to understand (i'm french) but my mouse i working now! thank's a lot
Great explanation, but i could add further to this by telling to everyone who still experiencing problems, to just turn on and off the button on the bottom of your mouse while its pairing the device
When i turn on and off the button it doesnt do something and straight telling me to do it
It worked, I used a second mouse, holy dude thank you you made my day! I thought I'll reformat my pc or something.
Np
i did this but it doesnt let me click install firmware
I tried doing this but it said that I got to connect it with the lightspeed receiver, but that's already plugged in. Please help.
Now do it with your mouse
@@S1abs what do u mean by that o have the same problem as this guy
@@S1abs lmao thanks for trying to help I've given up on logitech.
THX
what if my keyboad is tkl no numpad how do i do it?
You need a numpad or a 2 mouse
@everyone you need to update the little dongle thing that’s in the reciver as well no need to do all this
Actually just pull the little USB receiver on your wireless attachment and update it, you won’t have to do any of this. You can keep your mouse plugged in while you do this.
How
can someone help it says i need to update my firmware but it wont let me
thgx bro u saved my life
i almost went and bvought a new 1 already
works ! great video
For me youre a GOD. Saved my weekend
thank you you made my day!😍😍😍
Thank you so much mate
bro for some reason my gpro wasnt working said it was inactive right for like 30 min im trying to figure out how to fix it i got so mad to the point where i hit my mouse and for some reason that worked idk logitech is so annoying but i have to say i love there products
yo bro can you use g pro superlight without dongle?
Worked, thanks! Did I miss it or was there no warning to update the receiver separately when updating the mouse? If not that's just bad software lmao
it said it in yellow letters with a warning sign, that u had to have both your mouse and the usb receiver connected at the same time when u did the update
u got a new sub my g thx !!
Thank you
THOUSAND THANKDS BROOOOOOOO U SAVED MY DAY
when i try it tellss me to ccnnect it even thought it is so iddk how to wwork this
my dongle isnt getting detected when i put it in and even in the pairing tool. anyone have a solution/?
what happens if you dont have a number pad or a