Woodturning - Watertight and food safe canteen turned on multi axis without any jigs
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2023
- In this woodturning video I show how to make a wooden flask or canteen that you can actually have liquids in. I use regular woodturning tools without any special jigs to turn on two axis. I really make the most out of the lathe chuck. It is food safe(with reservations) and water tight. I have not found many videos on youtube about how to do this so I wanted to share my take on it. Great fun woodworking project.
Hope you like it :) - แนวปฏิบัติและการใช้ชีวิต
I literally sat slack-jawed while I watched this. Absolutely gorgeous!! You sir, are an inspiration. Thanks for sharing!
Thank you so much for your kind comment! 🤩🙌
Oh, I thought the outer panels would be more spherical, so the flask could hold more liquid.
Nice technique by the way.
And for the record, ALL two part epoxies are food safe once fully cured.
Another way to make it waterproof is to simply glue the panels on with epoxy, then when cured, melt some beeswax and pour it in. Fill it right up and dump it out immediately. That will leave a nice coating of wax on the inside.
Beautiful
Brilliant method and process. This way of thinking about the order of steps opens up new possibilities for a simple turner like myself. Beautiful work.
I’m glad you like it and want to try! 🤩👍
The flask looks Fantastic, well done 🙌🙌
Beautiful flask! Great job showing chucking techniques that novice turners may not have seen before.
Thank you very much 🙌
Beautiful work! As an alternative for the inside, Rustins plastic coating and hardener is a certified food safe product that would do the job well.
Thank you 🙌😃 I have never heard of that, but will look into it. Always been unsure what to treat my cups and such with and always looking for a better way. Thank you for that
A second thank you. I will definitely be trying Rustins on a project.
Absolutely beautiful piece. I'm definitely putting an attempt at recreation on my to do list
beautiful
After doing a fair amount of research on safe finishes for wood cups, I believe most epoxy would be fine for this application. If i understand correctly, the only risk in using epoxy is that it may chip off and get into the food you're making. This wouldn't be a problem for this project since you're not going to be scraping the inside with metal utensils (like you might with a wooden bowl). Just my thoughts from what I've read, but I may be wrong. Also, I must say that is one GORGEOUS piece. Your method of hollowing the inside was very creative, thanks for sharing your process 👍
That is the most beautiful wood flask i ever seen. thanks. But this is WAY beyond my ability.
I enjoyed seeing the carefully thought work flow on making the flask. This is what is so intriguing in wood turning. One aspect is to master the handling of the chisels. Another thing is figuring out how much can be done with rather simple tools, and what is the best workflow. You really showed the potential and opened my eyes for new opportunities using the same tools. Thanks! ❤
I’m glad you liked it 🙌 thank you 🤩
Actually, the work flow was wasteful and unnecessary. Why glue together 3 blocks of wood, only to completely cut 2 of them away? Just start with the dark block, cut it hollow, then add the 2 new end blocks as he did. As an engineer with production training, this unnecessary workflow made the viewing experience less enjoyable for me. I like to see optimized workflows.
@@MaskedMarble well, as a DSc (Tech) in industrial engineering and management I consider the workflow well thought. Because his intention was to demonstrate how to do this with just the specific chuck and jaws. For what you described, a set of different fixtures are needed, and jigs built, this method shows how to get perfect fit without any extra tools. Feel free to make a video to demonstrate a more efficient way to do this end result. Material for jigs counts.
@@MaskedMarbleполностью с тобой согласен, приклеить светлое дерево, лишь для того, что бы его отрезать, это расточительно и долго, можно было сразу начинать с тëмного дерева😉
Классная работа!!!!
Very creative and beautiful.
I've finally found a project I want to try. Beautifully done, thank you!
Ditto. I'll make one using olive wood from limbs cut from trees grown on my property and likewise the flask will be for olive oil.
Stunning, thanks for sharing.
Absolutely beautiful work!
That was absolutely one of the most unique and beautiful things I have seen turned. Thank you for the inspiration and sharing. I do have to imagine though that that spout coming around must have been a bit nerve wracking...lol.
Thank you so much! I’m glad to share it and really appreciate your comment 🤩 and yes, I had to remind myself of that spinning spout a few times, so I didn’t brake my fingers 😆
I have been doing a lot of wood turning during my 67 years on this planet, but this is absolutely one of the most beautiful and useful pieces of art I ever seen. I thank you humbly and will follow your next projects. You are truly an artist.
@@torbjornsjodin2447 Thank you so much for your kind comment. I’m very glad you liked my project and to have you following 🙌
Very nicely done!
Truly Beautiful work, thank you for the video!
Really great turning.
Just simply beautiful. Thank you for sharing with all of us. You are appreciated.
That is very nice of you! 🤩 thank you for watching 🙌
That is a really nice piece.
Beautiful!
🙌🤩
Andrew Hall used to demo this in UK. They are nice, well done.
It’s incredibly beautiful
Hello new my friend,
It's nice to see something new, beautiful and comfortable being created! A smart head and golden hands are the keys to success. Good luck in creativity. All the best. See you.
Thank you 🤩 I’m glad you liked it and thank you for watching 🙌
wow that is just beautiful
Incredible work well done i will have to try this
Awesome I love your video! I'm new to this kind of work !
Just stunning!
Thank you 🤩
It’s lovely. Thank you for inviting me round 🌞
👍🤩
What a neat idea, love the flask and this will be one I will try..Thank you for sharing.
It'll always be round anywhere in the X section, don't worry. If it was as you thought (ie. as in a horizontal Y section), it'd be very difficult to achieve a sufficiently accurate circle by eye. Nice flask 👍
So beautiful
A really nice project to test your skills. Looks great!
Thank you Nathan 🙌 it was challanging, but so much fun the see everything work out 🤩
Cool techniques and nice finished result
Absolutely fantastic thanks for sharing.
🤩
A great result from good hands.
Outstanding video. I'm going to try to make one
Great work, thank you for sharing! Very inspiring.
Glad you like it 🙌
Wow! So beautiful. And very creative. I loved it! ❤
Thank you 🤩🙌
I think the flask looks great. I have a wooden plate for most of my meals. It's made from camphor laurel. I use raw linseed oil to preserve and seal it. I've never tasted anything other than the food and couldn't imagine using any other plate. I don't know what our food safety standards are in Australia. I'll have to look.
I Googled food safe epoxy. Basically epoxy is food safe after it's cured fully. There is a list of resins that are stated as food safe.
Thank you! 🤩 I found the same in my research. Foodsafe when cured as long as it’s not heated up to much after.
This is absolutely beautiful, but what I found most fascinating was the moments when the spin speed synced up with the framerate and it looked like the neck was almost stationary.
wow... a nice project and a very good idea - thanks!
🤩🙌
this is amazing. What a beautiful piece.
Thank you 🤩
beautiful and practical project. Clearly illustrated. Well done!
Thank you! 🙌
Very nice. I'll give it a try soon.
Thank you! 😃 good luck and looking forward to hear how yours turned out 👍
Amazing piece.
🤩🙌
Awesome, thank you for sharing,Love it ❤️👍
Thank you for watching 🙌🤩
That is brilliant
Simply amazing! enough said.!!!
🤩🙌
Great job, very nice flask ❤
Thank you 🤩
Beautiful work
🙌🤩
Super cool man
Thank you 👍🙌
A lovely piece! You have inspired me to try some multi-axis turning!
I’m glad to hear that 🤩 happy turning 👍
lovely ♥ very innovative and love the use of the Jacobs chuck 👍
Thank you 🙌🤩
I love it!
Very cool. I'd like to try this. Thanks for the instruction.
Glad you liked it 👍 let me know how yours turn out 😃
Great tutorial. I will looking for something challenging to try. This can be my next turn. Thank you for sharing 😊
Amei, vou fazer! Parabéns
Gorgeous piece and great technique. Love it!
Thank you! 🤩
Absolutely beautiful and inspiring. 😁
Thank you! 🤩
Great job. Wanted it 3 times now. Going to make one of these flasks. Bob
Glad you like it 👍 good luck on yours and happy turning 😃
Excellent work. beautiful
Thank you 🙌🤩
aweosme work! i really enjoyed it. the process was so cool!
Thank you very much! 🤩
Creative approach and inspiring. A beautiful object!
Thank you very much 🙌
Great skills, well done.
Thank you 🙌🤩
Thank you for showing some extremely useful techniques in this project. I really enjoyed the video and learned a fair bit too. I'm still a novice, but this looks to be within my skill range, so I will be trying it.
Absolutely stunning!!!👏👏👏🔥 I’ll head to my shop and start making my own. Thanks for the inspiration ✌️
👍🤩 happy turning 🙌
Definitely an "A" plus on this project!
Thank you for your instructions, you did an amazing job. I can't wait to try this myself.
Thank you! 🤩 happy turning 👍🙌
Pretty good freehand sphere!
Thanks 🤩
Who says it has to be all one piece, This is amazing and opens up a whole new train of thoughts for me. Beautiful.
Beautiful work man
🙌🤩
Wow, that was fantastic! I love it, and your choice of woods is beautiful. Thank you so much for sharing.
Thank you! 🤩🙌
Gostei das instruções ótimo vídeo
I have just found your Site. Brilliant. Great work.
Thank you and welcome 🤩
Great video and great work 👍
Thank you! 🙌
Well thought out, in advance, to enable chucking, hollowing and finishing. Nice one!
Glad you like it 🙌 and thank you for the comment 🤩
I like this a lot. His skills with a lathe are top notch.......... at least as far as I can tell. I have thought about making a wooden flask in the past, but never tried. My ideas revolved around a glass container with wood epoxied around and to it. Then, work the wood on the outside by hand and finish. The glass container could be cleaned without touching the wood.
That's a neat idea
Well done 🎉
🤩🙌
That's awesome!!
🤩👍
Gorgeous, I don't think I've seen anything like that on the lathe, beautiful work!
Thank you woodfather(awesome name!) 🤩 🙌
Nice mate. You did a great work 👍👍
Thank you! 🙌
Nice work.
Thank you 🙌
Una de mis primeras piezas "importantes" la hice en quebracho blanco...una madera que a pesar de su dureza, se deja trabajar muy bien y tiene un acabado bien delicado....
Lo que explicas de las gubias es algo que pocos dicen, los ángulos, la manera de posicionar la herramienta, etc, son cosas que muy pocos cuentas bien....abrazo.
Amazing piece and I really compliment you on the voice over. People don’t realize how hard it is to do well and you nailed it. Thanks for sharing. You earned a new subscriber.
Thank you so much! 🙌 I really apreciate it, doing the voice over is the hardest part of the whole thing 😆
@@nordicturning I agree. Ive been practicing and working up to putting voice overs back in. For now it’s just music. I’ll get there eventually. Hope you have a great day. Looking forward to your next video.
Awesome- your presentation was outstanding as were your turning skills. Always appreciate a fine piece regardless of its practical potential. Esthetics to a turner or viewer are paramount.
Please continue to share with all in US. Tones 11:28 11:28
Great work! I may give it a go......
Thank you 🙌 you should, very satifying project 👍
Very Nice!
👍🤩
I always enjoy and look forward to your videos. Something else to add to the “to do” list.
I’m very glad to hear that Edward, thank you for watching 😃 You’ll have fun with this one for sure 👍
Fabulous! New subscriber, thank you.
I’m glad you liked it 🤩 thank you for watching and subscribing 🙌
Very nice! I learned a lot by watching this.
My sincere thanks.
I’m very glad you liked it 👍 thank you for watching 🙌
Very nice indeed
🙌😃
so glad to have found a wood turning channel with a narrator, and the project is great!
Brilliant!
🤩👍
Epoxy is perfectly food safe once cured. FDA hahahaha.
I think I figured it out at 1:45 , we shall see.
I was correct about turning it on its side. What a clever method I don’t think I’d have thought of. Well done, and a beautiful piece.
I am relieved with the knowledge that you're smart after all
Einfach genial tolle arbeit !!!
🤩👍
Nice little top would be awesome.
The bottle is very beautiful and you worked so propper! Congratulations! Very good job.
Thank you! 🙌