HABU \\ Building The Ultimate Tool Box
ฝัง
- เผยแพร่เมื่อ 26 ต.ค. 2019
- I wanted to build such a tool box since years, and finally I did it!
Have fun!!
Check out my sponsors for awesome tools:
Hikoki Powertools:
www.hikoki-powertools.com
Pferd Tools:
www.pferd.com
Matador Tools:
www.matador-webseite.de/index...
HABU's Tip Cup: www.paypal.me/hassanabuizmero
Thank you!! And don't forget to: #thumbupordown #Subscribe & #Share
Disclaimer: This is NOT a instructional "step-by-step" "how to" video! It is just an inspiration for you, and also an advertising for my person and skills... Hassan Abu-Izmero(HABU) - บันเทิง
Really nice toolbox. Just remember to ventilate it after using it outside in cold weather, otherwise condensation can make those nice tools rust.
Thank you
@@HABU Or just let it warm up without opening it so that the humidity can't reach the tools. Both solutions should work.
Very nice.
The problem is, when you show up to a job site, they might think you want to burn the place down.
😂
Was thinking the same thing...the only way to remodel this kitchen is burn it & start over lol
That’s just a warning in case they decide to mess around paying 😂
Lol
Hahahahahahaha
Your imagination and skills always impress. Just wow!
Thank you very much!
Красавчик!!! Отличная идея. Тоже люблю организацию и порядок.
Dude! What a cool project!!
Thank you very much 😎🤘🏼
Really cool tool box, Going to look good in a truck or jeep.
What a amazing project ! Heading to my shop to mock up a smaller version, Thanks for sharing !
Thank you very much!
In ver.2 you can stick a roll or pack of shop towels of wet wipes into the lid that can be pulled through the spout.
Maybe it's just me, but I always need paper towels or baby wipes handy in the shop.
Great build! Very inspiring and really getting my brain going...
This appeals to me on a deep, obsessive attention to detail! 😄
Love the look!
Love the latch!
It's great 😊
Thank you very much 😉🤙🏼
You took a regular Jerry can and built something incredible. I really love this 👍🏾👏🏾
Absolutely incredible, love it.
Out of this world, brilliant, thank you for sharing.
That's sick. But that was a very random assortmenttof tools. Some woodworking tools. Along with a bfh and socket set
Random? Yes and no. There's no "ultimate" workbench nor "ultimate" toolset --- that's a complete illusion; there's what your specific jobs/interests require 80% of the time, at the moment, and the rest. So your assortment will be different from his, and from your own 5years from now... but easy to adjust & optimise for your public-of-one.
Easily one of the coolest tool inventions I've seen this month! ;) I have been inspired to build something similar. Thanks Habu!
Thank you very much!
Mega pomysł i wykonanie.
Podręczny warsztat zawsze po ręką.
About 20 years ago did similar thing only had mounted my oxy/acetylene bottles
Which i carried in my jeep
Fixed many radiators and exhaust systems while on 4 wheel drive trails
Worked well with my lestec 150 amp alternator that i full fielded for stick tig welding and operating drills and grinders
Стой! Высокое напряжение!
Порадовала надпись)))
Канистра тоже советская. Парень с Германии там много всего с советских времен.
@@hamburg040hh Эта канистра изначально разработка немецких специалистов, 30-х годов.
Alter ist das GEIL 😍😍😍😍 Ein Traum!!!!! 👍🏼👍🏼👍🏼👍🏼💪🏽💪🏽
Dankeschön 😎🤙🏼
Amazing !
Very well done 👍🏼
Peace of art !
Ingenious and well thought out project. Love it.
Thank you!
That's pretty slick. Now make one that can hold 4 cordless drills 😁
yeah that's what i was wondering where is the second with all your drills in it? he has bit just no drill.
für den RAM! immer on board👍 geiles projekt🍀
Na klaro 😉 Dankeschön 😎🤙🏼
WHO on earth could possibly thumbs down this video? This is a dope creation. Smh
Thank you!
"Канистра для специалиста"😁. Отличная идея и не менее отличное воплощение!!! СУПЕР!!!👍👍👍
Did anyone else notice the shark push stick? 🦈
Wood eating shark do doo doo dooo dooo 😉🤣
😂
What horrible person puts that tune in my head!? GRGHGF.
Ooooh.... Let it gooooooo! Let it goooooooo!
Dads everywhere will have their revenge.
The finish carpenter on my job in NYC had his tools in a custom fitted cello case and doormen would let him through the lobby instead of frieght thinking he was giving lessons to some rich kid
You talkin' 'bout my shopmate Eric, from Thomas Rogers and Co., in Boston? Going back a few years, though. Give him my best!
In this case he's going to be tackled!
@@leehaelters6182
Nope. It was midtown Manhattan in '97, a guy called Garth from local 157.
I've seen somwthing similar since, a guitar case tricked out for cabinet installations
@@tommypetraglia4688, copy, thanks! I noticed a while back that Eric had published an article about this idea in one of the woodworking magazines.
Wahnsinn, ich bin sprachlos...
Respekt! 👍🏻
Dankeschön 😎🤙🏼
Very nice custom made one of a kind also an awesome way to save space - now I’m thinking about getting rid of my tool boxes taking so much space
I was going to say the only thing it's missing is the Maker knife and DiResta Ice Pick.
Then I realized those are EDC items, so obviously you have them 😎👌
Yes you’re right 😉
What is a “maker knife”?
@@charleshetrick3152 the maker knife is a cool utility knife by a TH-camr named Giaco Whatever. It's neat!!
Why would anyone want a diresta icepick? The dudes a clown
@@SH19922x Whoa dude, why so mad.
Hi,
at first I thought: "He will not cut the beautiful canister!" But then he did it and built a really cool toolbox out of it! Unfortunately, when building something like this, you never know which tool you actually need on tour. But the selection was quite okay.
Greeting Poly
Amazing styles, techniques & skills. Thanks so much giving new smarter ways of sorting tools station. Great stuff
Wow! Thank you for the idea!
You‘re welcome bud!
That would be perfect for the hand tools of a kitchen cabinet installer.
Wow, Your creativity goes on a higher level. Really GREAT IDEA. This toolbox can be very handy for an offraod truck owner - just with another set of tools inside :)
Thank you!
Up with the very best! I wish I would have kept some but I will find them again and again! Richard
Absolutely brilliant
Круто блин.Все компактно,аккуратно и самое главное всё что нужно 👍
Хер его знает, если увидят араба, идущего по улице с канистрой бензиновой... Ничего личного, но как-то это ооч подозрительно будет выглядеть. Где-нибудь в России, я думаю, он дооолго до объекта шёл бы, пока каждый мент его не остановит и не проверит. "А шо в канистре, что поджигать идём?". 😂😂😂
I am completely impressed! It’s definitely the coolest toolbox I’ve seen. Well done.
Thank you very much!
Totally agree. Super cool and no wasted space. So great for travel as well. Thanks for sharing that awsome build!! :)
FANTASTIC !!!!!!! CONGRATULATIONS !.
Very nicely done !!! Thanks for sharing your thoughts and videos, Rodney
Thank you
Dude! I love it! You must have spent some time on the tool layout.
Thank you😉🤙🏼
СТОЙ! Высокое напряжение!!
Endgeiles Teil und noch ein fetter Hingucker. TOP!
Danke 😎🤙🏼
Very cool. I think i need one of these for my Studebaker US6 army truck. Its got 2 Jerry holders next to the fuel tank and a set of road tools/spares would go nicely there.
Unfortunately, it's a truism that any toolbox you can lift yourself is missing the tool you need. :-)
Not to worry. Drawers will attract more stuff.
Can you shine light with a link on the rubber used around the sharp edges? Thanks! Superb ingenuity!
One thing you can try is to get some small rubber hose, 1\4" or so, cut one sideand it works just as well.
Try searching Amazon for edge grommet.
www.amazon.com/MATCC-Guards-Rubber-Protector-Protection/dp/B01BWKCUAO/ref=sr_1_6?keywords=car+trim&qid=1572691862&sr=8-6
Trim Lok
Well thought out, great craftsmanship....awesome little toolbox
Exceptional work
Put a couple roles of electrical tape and gas filler lid
A lot of Jeep guys will be copying this for automotive tools while overlanding
Kevin Thomson especially since jeeps are always broken lol
And I'm a mopar tech, no they'll just keep calling when their shit breaks
I actually had that idea a while back. Have a few used army water cans. Problem is making it water tight. I like to use 50cal ammo cans for a center console in my crawlers. Also for storage. Works great.
@Bantham Nobilis You're not a jeep guy if your not using military surplus cans and such. What yr is your Jk?
Amazon
RAMPAGE PRODUCTS 86619 Red Universal Trail Can Utility/Tool Box
Всё просто класс, серьёзный подход! Удачи в творчестве!
That is called perfection my men ! Keep making! I like your style too much! Greddings from Greece
The Ring on top is a bit small, I'm afraid it's going to break 😂👍 nice job brother!
😂🤙🏼 Thank you!
That ring might be small to grab, but very strong. Not going to break
@@bpmunroe 😂😂😂👍👍👍
Sorry that ring will hold a engine block,. so pulling the wood up and out of the case is nothing even close.
@@jamesfournier2810 man that was sarcasm!?! Didnt you understand?
Very cool but I would like to see one made for auto tools and offloading supplies.
Then make your own lol
The complete auto tool box would use a repurposed Maytag washing machine.
John Mays You just did! He showed step by step how to accommodate different tools. Same difference: just take different tools. Oh, and you have to get off the couch!
I'm glad to see the trolls are here too
He just showed us how to make one. Go make one.
Simply awesome 👍
After this, i cry when i see my tool Box. Again another big idea and amaizing work
Thank you very much
Seems like automotive tools would fit the theme better but still super cool.
Thank you!
Logic Bob
Typical lame response...
figured you’d show up sooner or later.
@@elliottalderson9349 WTF are you talking about?
Sir, may I suggest rare magnets.
This is awesome. Thank you for sharing!
Best tool box I've seen ever! 👍 😸👏
Thank you very much!
You could ad some magnets to hold some of the tools in instead of having so many latches thereby freeing up some space maybe to put more tools.
It almost looks like you're making a HUGE Zippo lighter!
😂
Unglaublich!
Alles drin was man(n) braucht.
Sehr geil verarbeitet!
Dankeschön 😎
This has to be one of the best tool boxes I have ever seen ,the time you must of put into planing it and the design was well worth it. thank you for the ider now to try make as half as good as yours . cheers
Thank you very much!😎🤙🏼
S
W
E
E
T
🤩
@Bantham Nobilis you're just jealous cuz you don't have the skills to make something like this and if you do have skills let's see you do a TH-cam video and make one that's even better the chances of that are very slim you're just a troll
Wow that's cool, but also heavy and over complicated.
Genius idea!
That's amazing love it
Was there something wrong with that Jerry Can? Cause it kinda looks like you ruined a perfectly good water container.
that's exactly what he did. lol $75 jerry can. oh well the youtube views makes up for it. I saw a guy cut up a antique Disston handsaw for a knife blank lol. youtube man
Let's see, tens of millions of Jerry cans in the world and only one of these toolboxes. I think it'll be OK.
D.W. Dunn, and a fair few million of the tens of millions are likely not suitable for holding water any more. Being different and cutsie artistic is awesome, pointlessly ruining a useful tool is just infuriating. It’s not like there’s a whole industry dedicated to making tool boxes or anything.
D.W. Dunn and another thing, why waste the time and supplies to paint the drawer boxes? I make artsy bullshit too, I love me some black iron pipe lighting fixtures but I take steps to make sure the design doesn’t prevent the pipe later being used for its original purpose whilst also adhering to the NEC. When the apocalypse comes and I need to trade useful Black Iron Pipe components for ammo or food or safe passage through the forbidden zone I’m set, but I can’t see how a Jerry Can that used to hold potable water will be useful.
charles hetrick I get your point, I really do. When I go to a craft fair it's usually a nonstop cringe fest because the housewives there have raided their husband's tool stashes to paint hammers and wrenches and other useful objects. And don't get me started on old handsaws embellished with poorly painted barn scenes. That's a particular pet peeve of mine. But I just can't get worked up over this. It seems to me like he has traded one useful object for another object that is just as useful. Maybe even more so. Now I doubt such a showboat piece is going to see hard use in real life. But I don't see any great harm in it either way. And besides, it is still useful to hold water. Pouring it may be a bit tricky, of course. Bu it'll still hold some. LOL
Outstanding, except for the sad way to store drill bits
Maybe a little divider to dull them out... Wonderful work
one of those indexed plastic cases?
But the little files are wrapped up nice and tidy.
I wanted to comment on this too.
Just 3d print an insert. 5 minute job.
That's is a really cool idea, and great work! Nice job!
SERIOUSLY cool build ! Thanks for sharing another awesome video & Happy Sunday
Thank you very much!
Never cut an old petrol canister with a grinder... Kaboom?!?!? 🙈
Also my first thought, but then I saw how shiny new his selection was.
I don't think that can has seen any petrol.
Все хорошо, но меня бы жаба задавила испортить новую канистру😨
Вот! Я тоже об этом подумал! Никакой жизненной необходимости портить отличную канистру НЕ БЫЛО!
Поддерживаю!
Тю. Ну испорти старую.
Испортил - это ни в этом случае .🤗
@@user-kd4to9kk6c не спорю с вами, у каждого свое мнение и понятие пользы от сделанного. И ипсользованного материала.
Really awesome, great job!
Thank you for sharing!
Thank you!
A well built and durable toolbox that will last longer than an average tool! Nice!
Thank you 😎🤙🏼
"Стой высокое напряжение" ????? откуда???
Может он живет где нибудь на территории бывшей СССР?
@@dmitriiprimerov1898 живёт в Германии, город Mannheim
От подписчика..)
Great project -- I love the jerry can, been wanting to make something out of one myself... wonderful job!
Thank you!😉
Nice...that just made my day.
Mega cool geworden
Einfach, Simpel und Genial.
Cooles Projekt zum Nachbauen
👍
FANTASTIC , WELL DONE , GREAT JOB .
Thank you!
What a great use of a jerry can. We new needed something like that, now we want something like that. Great work!!!👍👍👍👍👍👍
Thank you very much!
Nice. Great idea. Thanks
That is an awesome build, love the creativity.
Thank you 😉
Hat’s off to your creativity. 👌👏👍
Thank you
What can you say other than, WOW! Beautiful work!
Thank you
Awesome and clever, THANK YOU !
Thanks😉
Platz perfekt ausgenutzt! Mega!
Danke 😉
Good quality content, not music added , just the sound of his tools very nice
That is beautiful, my friend! 👍
Fantastic.
What a great project, the possibilities for storing different kinds of things are endless in a cool jerry can, thanks for sharing Hassan 5⭐'s
Thank you very much 😎🤙🏼
Awesome job absolutely perfect
Thank you!
Just beautiful, well done.
Thank you
This is the most German toolbox EVER. Ve must haff order! I love it.
Thank you 😎🤙🏼
Incredible!
Thanks!
Way better than the Jerry can toolboxes on the web...really well done!!! More tools in there than most people know what to do with!!!
Thank you very much
Very good! Thank you.
It‘s a portable MakerTruck. 🚒
Awesomeness delivered!
Thank you!😁🤙🏼
Great job.very neat.